diff mbox series

[V3,3/3] dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings

Message ID 1582277450-27382-4-git-send-email-okukatla@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Add SC7180 interconnect provider driver | expand

Commit Message

Odelu Kukatla Feb. 21, 2020, 9:30 a.m. UTC 
The Qualcomm SC7180 platform has several bus fabrics that could be
controlled and tuned dynamically according to the bandwidth demand.

Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 95 ++++++++++++++++++++++++++++++++++++
 1 file changed, 95 insertions(+)

Comments

Matthias Kaehlcke Feb. 21, 2020, 7:40 p.m. UTC | #1 
Hi Odelu,

> Subject: dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings

This patch doesn't add a binding, but DT entries for SC7180.

The subject of v2 was "arm64: dts: sc7180: Add interconnect provider
DT nodes", please go back to that or something similar.
Odelu Kukatla Feb. 25, 2020, 3:48 p.m. UTC | #2 
On 2020-02-22 01:10, Matthias Kaehlcke wrote:
> Hi Odelu,
> 
>> Subject: dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings
> 
> This patch doesn't add a binding, but DT entries for SC7180.
> 
> The subject of v2 was "arm64: dts: sc7180: Add interconnect provider
> DT nodes", please go back to that or something similar.

Thanks for the review!
Noticed this later, i will address this in next patch.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index cc5a94f..3e28f34 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -748,6 +748,69 @@ 
 			};
 		};
 
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sc7180-config-noc";
+			reg = <0 0x01500000 0 0x28000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sc7180-system-noc";
+			reg = <0 0x01620000 0 0x17080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@1638000 {
+			compatible = "qcom,sc7180-mc-virt";
+			reg = <0 0x01638000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		qup_virt: interconnect@1650000 {
+			compatible = "qcom,sc7180-qup-virt";
+			reg = <0 0x01650000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sc7180-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1705000 {
+			compatible = "qcom,sc7180-aggre2-noc";
+			reg = <0 0x01705000 0 0x9000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@170e000 {
+			compatible = "qcom,sc7180-compute-noc";
+			reg = <0 0x0170e000 0 0x6000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sc7180-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ipa_virt: interconnect@1e00000 {
+			compatible = "qcom,sc7180-ipa-virt";
+			reg = <0 0x01e00000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0 0x01f40000 0 0x40000>;
@@ -1103,6 +1166,13 @@ 
 			};
 		};
 
+		dc_noc: interconnect@9160000 {
+			compatible = "qcom,sc7180-dc-noc";
+			reg = <0 0x09160000 0 0x03200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc7180-llcc";
 			reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
@@ -1110,6 +1180,20 @@ 
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sc7180-gem-noc";
+			reg = <0 0x09680000 0 0x3e200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		npu_noc: interconnect@9990000 {
+			compatible = "qcom,sc7180-npu-noc";
+			reg = <0 0x09990000 0 0x1600>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -1154,6 +1238,13 @@ 
 			};
 		};
 
+		camnoc_virt: interconnect@ac00000 {
+			compatible = "qcom,sc7180-camnoc-virt";
+			reg = <0 0x0ac00000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sc7180-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>;
@@ -1481,6 +1572,10 @@ 
 					};
 				};
 			};
+
+			apps_bcm_voter: bcm_voter {
+				compatible = "qcom,bcm-voter";
+			};
 		};
 
 		cpufreq_hw: cpufreq@18323000 {