| Message ID | 20200226230346.672-8-rentao.bupt@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | aspeed-g6: enable usb support | expand |
On Wed, 2020-02-26 at 15:03 -0800, rentao.bupt@gmail.com wrote: > From: Tao Ren <rentao.bupt@gmail.com> > > Add device tree binding documentation for aspeed usb-vhub driver. > > Signed-off-by: Tao Ren <rentao.bupt@gmail.com> > --- > No change in v2/v3/v4: > - the patch is added to the patch series since v4. > > .../bindings/usb/aspeed,usb-vhub.yaml | 71 +++++++++++++++++++ > 1 file changed, 71 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > > diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > new file mode 100644 > index 000000000000..6ebae46641e5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > @@ -0,0 +1,71 @@ > +# SPDX-License-Identifier: GPL-2.0-or-later > +# Copyright (c) 2020 Facebook Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/usb/aspeed,usb-vhub.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ASPEED USB 2.0 Virtual Hub Controller > + > +maintainers: > + - Felipe Balbi <balbi@kernel.org> Actually I mantain that one, so make this Benjamin Herrenschmidt < benh@kernel.crashing.org>. Felipe is the overall maintainer of the USB gadget subsystem afaik. > +description: |+ > + The ASPEED USB 2.0 Virtual Hub Controller implements 1 set of USB Hub > + register and several sets of Device and Endpoint registers to support > + the Virtual Hub's downstream USB devices. > + > + Supported number of devices and endpoints vary depending on hardware > + revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices > + and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream > + devices and 21 generic endpoints. > + > +properties: > + compatible: > + enum: > + - aspeed,ast2400-usb-vhub > + - aspeed,ast2500-usb-vhub > + - aspeed,ast2600-usb-vhub > + > + reg: > + maxItems: 1 > + description: Common configuration registers > + > + clocks: > + maxItems: 1 > + description: The Virtual Hub Controller clock gate > + > + interrupts: > + maxItems: 1 > + > + aspeed,vhub-downstream-ports: > + description: Number of downstream ports supported by the Virtual Hub > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + > + aspeed,vhub-generic-endpoints: > + description: Number of generic endpoints supported by the Virtual Hub > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + > +required: > + - compatible > + - reg > + - clocks > + - interrupts > + - aspeed,vhub-downstream-ports > + - aspeed,vhub-generic-endpoints > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/aspeed-clock.h> > + vhub: usb-vhub@1e6a0000 { > + compatible = "aspeed,ast2500-usb-vhub"; > + reg = <0x1e6a0000 0x300>; > + interrupts = <5>; > + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb2ad_default>; > + };
On Wed, 26 Feb 2020 at 23:04, <rentao.bupt@gmail.com> wrote: > > From: Tao Ren <rentao.bupt@gmail.com> > > Add device tree binding documentation for aspeed usb-vhub driver. A nitpick: the bindings are supposed to describe hardware, so we would say this patch adds documentation for the hardware > > Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> > --- > No change in v2/v3/v4: > - the patch is added to the patch series since v4. > > .../bindings/usb/aspeed,usb-vhub.yaml | 71 +++++++++++++++++++ > 1 file changed, 71 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > > diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > new file mode 100644 > index 000000000000..6ebae46641e5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > @@ -0,0 +1,71 @@ > +# SPDX-License-Identifier: GPL-2.0-or-later > +# Copyright (c) 2020 Facebook Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/usb/aspeed,usb-vhub.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ASPEED USB 2.0 Virtual Hub Controller > + > +maintainers: > + - Felipe Balbi <balbi@kernel.org> > + > +description: |+ > + The ASPEED USB 2.0 Virtual Hub Controller implements 1 set of USB Hub > + register and several sets of Device and Endpoint registers to support > + the Virtual Hub's downstream USB devices. > + > + Supported number of devices and endpoints vary depending on hardware > + revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices > + and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream > + devices and 21 generic endpoints. > + > +properties: > + compatible: > + enum: > + - aspeed,ast2400-usb-vhub > + - aspeed,ast2500-usb-vhub > + - aspeed,ast2600-usb-vhub > + > + reg: > + maxItems: 1 > + description: Common configuration registers > + > + clocks: > + maxItems: 1 > + description: The Virtual Hub Controller clock gate > + > + interrupts: > + maxItems: 1 > + > + aspeed,vhub-downstream-ports: > + description: Number of downstream ports supported by the Virtual Hub > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + > + aspeed,vhub-generic-endpoints: > + description: Number of generic endpoints supported by the Virtual Hub > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + > +required: > + - compatible > + - reg > + - clocks > + - interrupts > + - aspeed,vhub-downstream-ports > + - aspeed,vhub-generic-endpoints > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/aspeed-clock.h> > + vhub: usb-vhub@1e6a0000 { > + compatible = "aspeed,ast2500-usb-vhub"; > + reg = <0x1e6a0000 0x300>; > + interrupts = <5>; > + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb2ad_default>; > + }; > -- > 2.17.1 >
On Wed, 26 Feb 2020 15:03:46 -0800, rentao.bupt@gmail.com wrote: > From: Tao Ren <rentao.bupt@gmail.com> > > Add device tree binding documentation for aspeed usb-vhub driver. > > Signed-off-by: Tao Ren <rentao.bupt@gmail.com> > --- > No change in v2/v3/v4: > - the patch is added to the patch series since v4. > > .../bindings/usb/aspeed,usb-vhub.yaml | 71 +++++++++++++++++++ > 1 file changed, 71 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > My bot found errors running 'make dt_binding_check' on your patch: Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.example.dt.yaml: usb-vhub@1e6a0000: 'aspeed,vhub-downstream-ports' is a required property /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.example.dt.yaml: usb-vhub@1e6a0000: 'aspeed,vhub-generic-endpoints' is a required property See https://patchwork.ozlabs.org/patch/1245388 Please check and re-submit.
Hi Rob, On Thu, Feb 27, 2020 at 10:55:04AM -0600, Rob Herring wrote: > On Wed, 26 Feb 2020 15:03:46 -0800, rentao.bupt@gmail.com wrote: > > From: Tao Ren <rentao.bupt@gmail.com> > > > > Add device tree binding documentation for aspeed usb-vhub driver. > > > > Signed-off-by: Tao Ren <rentao.bupt@gmail.com> > > --- > > No change in v2/v3/v4: > > - the patch is added to the patch series since v4. > > > > .../bindings/usb/aspeed,usb-vhub.yaml | 71 +++++++++++++++++++ > > 1 file changed, 71 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > > > > My bot found errors running 'make dt_binding_check' on your patch: > > Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.example.dt.yaml: usb-vhub@1e6a0000: 'aspeed,vhub-downstream-ports' is a required property > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.example.dt.yaml: usb-vhub@1e6a0000: 'aspeed,vhub-generic-endpoints' is a required property > > See https://patchwork.ozlabs.org/patch/1245388 > Please check and re-submit. I ran "make dt_binding_check" in my local environment and don't see the failures. The 2 properties are introduced in this patch set and I add the properties in aspeed-g4/5/6 dtsi files (patch #4, #5 and #6): am I missing something? Sorry I forgot to add you when including the dt-binding document to the series v4: will add you and all dt binding maintainers in v5 soon. Cheers, Tao
Hi Rob, On Thu, Feb 27, 2020 at 02:42:51PM -0800, Tao Ren wrote: > Sorry I forgot to add you when including the dt-binding document to the > series v4: will add you and all dt binding maintainers in v5 soon. Just realized I already added you for the previous patch versions. Sorry about the noise. Cheers, Tao
Hi Rob, On Thu, Feb 27, 2020 at 02:42:51PM -0800, Tao Ren wrote: > > My bot found errors running 'make dt_binding_check' on your patch: > > > > Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node > > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.example.dt.yaml: usb-vhub@1e6a0000: 'aspeed,vhub-downstream-ports' is a required property > > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.example.dt.yaml: usb-vhub@1e6a0000: 'aspeed,vhub-generic-endpoints' is a required property > > > > See https://patchwork.ozlabs.org/patch/1245388 > > Please check and re-submit. > > I ran "make dt_binding_check" in my local environment and don't see the > failures. The 2 properties are introduced in this patch set and I add > the properties in aspeed-g4/5/6 dtsi files (patch #4, #5 and #6): am I > missing something? I think I missed "libyaml-dev" package. I've reproduced the error in my environment and added the 2 required properties in patch v6. Cheers, Tao
diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml new file mode 100644 index 000000000000..6ebae46641e5 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright (c) 2020 Facebook Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/aspeed,usb-vhub.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED USB 2.0 Virtual Hub Controller + +maintainers: + - Felipe Balbi <balbi@kernel.org> + +description: |+ + The ASPEED USB 2.0 Virtual Hub Controller implements 1 set of USB Hub + register and several sets of Device and Endpoint registers to support + the Virtual Hub's downstream USB devices. + + Supported number of devices and endpoints vary depending on hardware + revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices + and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream + devices and 21 generic endpoints. + +properties: + compatible: + enum: + - aspeed,ast2400-usb-vhub + - aspeed,ast2500-usb-vhub + - aspeed,ast2600-usb-vhub + + reg: + maxItems: 1 + description: Common configuration registers + + clocks: + maxItems: 1 + description: The Virtual Hub Controller clock gate + + interrupts: + maxItems: 1 + + aspeed,vhub-downstream-ports: + description: Number of downstream ports supported by the Virtual Hub + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + aspeed,vhub-generic-endpoints: + description: Number of generic endpoints supported by the Virtual Hub + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - clocks + - interrupts + - aspeed,vhub-downstream-ports + - aspeed,vhub-generic-endpoints + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + vhub: usb-vhub@1e6a0000 { + compatible = "aspeed,ast2500-usb-vhub"; + reg = <0x1e6a0000 0x300>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + };