diff mbox series

[v4,4/7] ARM: dts: aspeed-g6: add usb functions

Message ID 20200226230346.672-5-rentao.bupt@gmail.com (mailing list archive)
State Superseded
Headers show
Series aspeed-g6: enable usb support | expand

Commit Message

Tao Ren Feb. 26, 2020, 11:03 p.m. UTC 
From: Tao Ren <rentao.bupt@gmail.com>

Add USB components and according pin groups in aspeed-g6 dtsi.

Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
 No change in v3/v4.
 Changes in v2:
   - added port/endpoint properties for vhub dt node.

 arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi | 25 +++++++++++++
 arch/arm/boot/dts/aspeed-g6.dtsi         | 45 ++++++++++++++++++++++++
 2 files changed, 70 insertions(+)

Comments

Benjamin Herrenschmidt Feb. 27, 2020, 4:10 a.m. UTC | #1 
On Wed, 2020-02-26 at 15:03 -0800, rentao.bupt@gmail.com wrote:
> From: Tao Ren <rentao.bupt@gmail.com>
> 
> Add USB components and according pin groups in aspeed-g6 dtsi.
> 
> Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
> Reviewed-by: Andrew Jeffery <andrew@aj.id.au>

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

> ---
>  No change in v3/v4.
>  Changes in v2:
>    - added port/endpoint properties for vhub dt node.
> 
>  arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi | 25 +++++++++++++
>  arch/arm/boot/dts/aspeed-g6.dtsi         | 45
> ++++++++++++++++++++++++
>  2 files changed, 70 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> index 045ce66ca876..7028e21bdd98 100644
> --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> @@ -1112,6 +1112,31 @@
>  		groups = "UART9";
>  	};
>  
> +	pinctrl_usb2ah_default: usb2ah_default {
> +		function = "USB2AH";
> +		groups = "USBA";
> +	};
> +
> +	pinctrl_usb2ad_default: usb2ad_default {
> +		function = "USB2AD";
> +		groups = "USBA";
> +	};
> +
> +	pinctrl_usb2bh_default: usb2bh_default {
> +		function = "USB2BH";
> +		groups = "USBB";
> +	};
> +
> +	pinctrl_usb2bd_default: usb2bd_default {
> +		function = "USB2BD";
> +		groups = "USBB";
> +	};
> +
> +	pinctrl_usb11bhid_default: usb11bhid_default {
> +		function = "USB11BHID";
> +		groups = "USBB";
> +	};
> +
>  	pinctrl_vb_default: vb_default {
>  		function = "VB";
>  		groups = "VB";
> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi
> b/arch/arm/boot/dts/aspeed-g6.dtsi
> index 796976d275e1..0a29b3b57a9d 100644
> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> @@ -245,6 +245,51 @@
>  			status = "disabled";
>  		};
>  
> +		ehci0: usb@1e6a1000 {
> +			compatible = "aspeed,ast2600-ehci", "generic-
> ehci";
> +			reg = <0x1e6a1000 0x100>;
> +			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_usb2ah_default>;
> +			status = "disabled";
> +		};
> +
> +		ehci1: usb@1e6a3000 {
> +			compatible = "aspeed,ast2600-ehci", "generic-
> ehci";
> +			reg = <0x1e6a3000 0x100>;
> +			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_usb2bh_default>;
> +			status = "disabled";
> +		};
> +
> +		uhci: usb@1e6b0000 {
> +			compatible = "aspeed,ast2600-uhci", "generic-
> uhci";
> +			reg = <0x1e6b0000 0x100>;
> +			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +			#ports = <2>;
> +			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
> +			status = "disabled";
> +			/*
> +			 * No default pinmux, it will follow EHCI, use
> an
> +			 * explicit pinmux override if EHCI is not
> enabled.
> +			 */
> +		};
> +
> +		vhub: usb-vhub@1e6a0000 {
> +			compatible = "aspeed,ast2600-usb-vhub";
> +			reg = <0x1e6a0000 0x350>;
> +			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> +			aspeed,vhub-downstream-ports = <7>;
> +			aspeed,vhub-generic-endpoints = <21>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_usb2ad_default>;
> +			status = "disabled";
> +		};
> +
>  		apb {
>  			compatible = "simple-bus";
>  			#address-cells = <1>;
Joel Stanley Feb. 27, 2020, 5:54 a.m. UTC | #2 
On Thu, 27 Feb 2020 at 04:10, Benjamin Herrenschmidt
<benh@kernel.crashing.org> wrote:
>
> On Wed, 2020-02-26 at 15:03 -0800, rentao.bupt@gmail.com wrote:
> > From: Tao Ren <rentao.bupt@gmail.com>
> >
> > Add USB components and according pin groups in aspeed-g6 dtsi.
> >
> > Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
> > Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
>
> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Reviewed-by: Joel Stanley <joel@jms.id.au>

I will take this patch through the aspeed tree for 5.7.

Cheers,

Joel


>
> > ---
> >  No change in v3/v4.
> >  Changes in v2:
> >    - added port/endpoint properties for vhub dt node.
> >
> >  arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi | 25 +++++++++++++
> >  arch/arm/boot/dts/aspeed-g6.dtsi         | 45
> > ++++++++++++++++++++++++
> >  2 files changed, 70 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> > b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> > index 045ce66ca876..7028e21bdd98 100644
> > --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> > +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> > @@ -1112,6 +1112,31 @@
> >               groups = "UART9";
> >       };
> >
> > +     pinctrl_usb2ah_default: usb2ah_default {
> > +             function = "USB2AH";
> > +             groups = "USBA";
> > +     };
> > +
> > +     pinctrl_usb2ad_default: usb2ad_default {
> > +             function = "USB2AD";
> > +             groups = "USBA";
> > +     };
> > +
> > +     pinctrl_usb2bh_default: usb2bh_default {
> > +             function = "USB2BH";
> > +             groups = "USBB";
> > +     };
> > +
> > +     pinctrl_usb2bd_default: usb2bd_default {
> > +             function = "USB2BD";
> > +             groups = "USBB";
> > +     };
> > +
> > +     pinctrl_usb11bhid_default: usb11bhid_default {
> > +             function = "USB11BHID";
> > +             groups = "USBB";
> > +     };
> > +
> >       pinctrl_vb_default: vb_default {
> >               function = "VB";
> >               groups = "VB";
> > diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi
> > b/arch/arm/boot/dts/aspeed-g6.dtsi
> > index 796976d275e1..0a29b3b57a9d 100644
> > --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> > +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> > @@ -245,6 +245,51 @@
> >                       status = "disabled";
> >               };
> >
> > +             ehci0: usb@1e6a1000 {
> > +                     compatible = "aspeed,ast2600-ehci", "generic-
> > ehci";
> > +                     reg = <0x1e6a1000 0x100>;
> > +                     interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> > +                     clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> > +                     pinctrl-names = "default";
> > +                     pinctrl-0 = <&pinctrl_usb2ah_default>;
> > +                     status = "disabled";
> > +             };
> > +
> > +             ehci1: usb@1e6a3000 {
> > +                     compatible = "aspeed,ast2600-ehci", "generic-
> > ehci";
> > +                     reg = <0x1e6a3000 0x100>;
> > +                     interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > +                     clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
> > +                     pinctrl-names = "default";
> > +                     pinctrl-0 = <&pinctrl_usb2bh_default>;
> > +                     status = "disabled";
> > +             };
> > +
> > +             uhci: usb@1e6b0000 {
> > +                     compatible = "aspeed,ast2600-uhci", "generic-
> > uhci";
> > +                     reg = <0x1e6b0000 0x100>;
> > +                     interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> > +                     #ports = <2>;
> > +                     clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
> > +                     status = "disabled";
> > +                     /*
> > +                      * No default pinmux, it will follow EHCI, use
> > an
> > +                      * explicit pinmux override if EHCI is not
> > enabled.
> > +                      */
> > +             };
> > +
> > +             vhub: usb-vhub@1e6a0000 {
> > +                     compatible = "aspeed,ast2600-usb-vhub";
> > +                     reg = <0x1e6a0000 0x350>;
> > +                     interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> > +                     clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> > +                     aspeed,vhub-downstream-ports = <7>;
> > +                     aspeed,vhub-generic-endpoints = <21>;
> > +                     pinctrl-names = "default";
> > +                     pinctrl-0 = <&pinctrl_usb2ad_default>;
> > +                     status = "disabled";
> > +             };
> > +
> >               apb {
> >                       compatible = "simple-bus";
> >                       #address-cells = <1>;
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 045ce66ca876..7028e21bdd98 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -1112,6 +1112,31 @@ 
 		groups = "UART9";
 	};
 
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2ad_default: usb2ad_default {
+		function = "USB2AD";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USBB";
+	};
+
+	pinctrl_usb2bd_default: usb2bd_default {
+		function = "USB2BD";
+		groups = "USBB";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USBB";
+	};
+
 	pinctrl_vb_default: vb_default {
 		function = "VB";
 		groups = "VB";
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 796976d275e1..0a29b3b57a9d 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -245,6 +245,51 @@ 
 			status = "disabled";
 		};
 
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2600-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#ports = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an
+			 * explicit pinmux override if EHCI is not enabled.
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2600-usb-vhub";
+			reg = <0x1e6a0000 0x350>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <7>;
+			aspeed,vhub-generic-endpoints = <21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ad_default>;
+			status = "disabled";
+		};
+
 		apb {
 			compatible = "simple-bus";
 			#address-cells = <1>;