diff mbox series

[V16,1/5] dt-bindings: fsl: scu: add thermal binding

Message ID 1582330132-13461-1-git-send-email-Anson.Huang@nxp.com (mailing list archive)
State New, archived
Headers show
Series [V16,1/5] dt-bindings: fsl: scu: add thermal binding | expand

Commit Message

Anson Huang Feb. 22, 2020, 12:08 a.m. UTC 
NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
system controller, the system controller is in charge of system
power, clock and thermal sensors etc. management, Linux kernel
has to communicate with system controller via MU (message unit)
IPC to get temperature from thermal sensors, this patch adds
binding doc for i.MX system controller thermal driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
---
No change.
---
 .../devicetree/bindings/arm/freescale/fsl,scu.txt        | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Comments

Daniel Lezcano Feb. 27, 2020, 9:09 a.m. UTC | #1 
On 22/02/2020 01:08, Anson Huang wrote:
> NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
> system controller, the system controller is in charge of system
> power, clock and thermal sensors etc. management, Linux kernel
> has to communicate with system controller via MU (message unit)
> IPC to get temperature from thermal sensors, this patch adds
> binding doc for i.MX system controller thermal driver.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>

I'll will take patches 1, 2 and 3

Thanks!

  -- Daniel

> ---
> No change.
> ---
>  .../devicetree/bindings/arm/freescale/fsl,scu.txt        | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> index e07735a8..7f42cc3 100644
> --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> @@ -166,6 +166,17 @@ Required properties:
>                followed by "fsl,imx-sc-key";
>  - linux,keycodes: See Documentation/devicetree/bindings/input/keys.txt
>  
> +Thermal bindings based on SCU Message Protocol
> +------------------------------------------------------------
> +
> +Required properties:
> +- compatible:			Should be :
> +				  "fsl,imx8qxp-sc-thermal"
> +				followed by "fsl,imx-sc-thermal";
> +
> +- #thermal-sensor-cells:	See Documentation/devicetree/bindings/thermal/thermal.txt
> +				for a description.
> +
>  Example (imx8qxp):
>  -------------
>  aliases {
> @@ -238,6 +249,11 @@ firmware {
>  			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
>  			timeout-sec = <60>;
>  		};
> +
> +		tsens: thermal-sensor {
> +			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
> +			#thermal-sensor-cells = <1>;
> +		};
>  	};
>  };
>  
>
Anson Huang Feb. 28, 2020, 12:45 a.m. UTC | #2 
Hi, Shawn
	Will you take patch #4 and #5? Thanks.

Anson

> Subject: Re: [PATCH V16 1/5] dt-bindings: fsl: scu: add thermal binding
> 
> On 22/02/2020 01:08, Anson Huang wrote:
> > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system
> > controller, the system controller is in charge of system power, clock
> > and thermal sensors etc. management, Linux kernel has to communicate
> > with system controller via MU (message unit) IPC to get temperature
> > from thermal sensors, this patch adds binding doc for i.MX system
> > controller thermal driver.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
> 
> I'll will take patches 1, 2 and 3
> 
> Thanks!
> 
>   -- Daniel
> 
> > ---
> > No change.
> > ---
> >  .../devicetree/bindings/arm/freescale/fsl,scu.txt        | 16
> ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > index e07735a8..7f42cc3 100644
> > --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > @@ -166,6 +166,17 @@ Required properties:
> >                followed by "fsl,imx-sc-key";
> >  - linux,keycodes: See
> > Documentation/devicetree/bindings/input/keys.txt
> >
> > +Thermal bindings based on SCU Message Protocol
> > +------------------------------------------------------------
> > +
> > +Required properties:
> > +- compatible:			Should be :
> > +				  "fsl,imx8qxp-sc-thermal"
> > +				followed by "fsl,imx-sc-thermal";
> > +
> > +- #thermal-sensor-cells:	See
> Documentation/devicetree/bindings/thermal/thermal.txt
> > +				for a description.
> > +
> >  Example (imx8qxp):
> >  -------------
> >  aliases {
> > @@ -238,6 +249,11 @@ firmware {
> >  			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
> >  			timeout-sec = <60>;
> >  		};
> > +
> > +		tsens: thermal-sensor {
> > +			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-
> thermal";
> > +			#thermal-sensor-cells = <1>;
> > +		};
> >  	};
> >  };
> >
> >
> 
> 
> --
> 
> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
> linaro.org%2F&amp;data=02%7C01%7CAnson.Huang%40nxp.com%7Ca5fb78
> c828bd40f20c6a08d7bb64c1f3%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C
> 0%7C0%7C637183913730069723&amp;sdata=qKt%2BmT7yTwAmtzUkaujB%2
> BuQX0qSzaj32r3cwL0coPAw%3D&amp;reserved=0> Linaro.org │ Open
> source software for ARM SoCs
> 
> Follow Linaro:
> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
> facebook.com%2Fpages%2FLinaro&amp;data=02%7C01%7CAnson.Huang%4
> 0nxp.com%7Ca5fb78c828bd40f20c6a08d7bb64c1f3%7C686ea1d3bc2b4c6fa9
> 2cd99c5c301635%7C0%7C0%7C637183913730069723&amp;sdata=S1QNjqHq
> X1njW436D5jcnZKSmdm%2BZty5sMCO03CvNts%3D&amp;reserved=0>
> Facebook |
> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ftwitte
> r.com%2F%23!%2Flinaroorg&amp;data=02%7C01%7CAnson.Huang%40nxp.c
> om%7Ca5fb78c828bd40f20c6a08d7bb64c1f3%7C686ea1d3bc2b4c6fa92cd99c
> 5c301635%7C0%7C0%7C637183913730069723&amp;sdata=4j%2FDXNQieTgs
> XhvWWYNSTgnpbj8U0b8SKd62XeBxz8Y%3D&amp;reserved=0> Twitter |
> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
> linaro.org%2Flinaro-
> blog%2F&amp;data=02%7C01%7CAnson.Huang%40nxp.com%7Ca5fb78c828
> bd40f20c6a08d7bb64c1f3%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C
> 0%7C637183913730069723&amp;sdata=onbNbXAbnxwYwUTMpG5jGtsfmN%
> 2BMJF8JVZV2YS0bbJw%3D&amp;reserved=0> Blog
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index e07735a8..7f42cc3 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -166,6 +166,17 @@  Required properties:
               followed by "fsl,imx-sc-key";
 - linux,keycodes: See Documentation/devicetree/bindings/input/keys.txt
 
+Thermal bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+Required properties:
+- compatible:			Should be :
+				  "fsl,imx8qxp-sc-thermal"
+				followed by "fsl,imx-sc-thermal";
+
+- #thermal-sensor-cells:	See Documentation/devicetree/bindings/thermal/thermal.txt
+				for a description.
+
 Example (imx8qxp):
 -------------
 aliases {
@@ -238,6 +249,11 @@  firmware {
 			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
 			timeout-sec = <60>;
 		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
 	};
 };