diff mbox series

[1/2] ARM: dts: remove g-use-dma from rockchip usb nodes

Message ID 20200228113922.20266-1-jbx6244@gmail.com (mailing list archive)
State Mainlined
Commit a0514bc16739c245714fc63d20c9facd711c6fe9
Headers show
Series [1/2] ARM: dts: remove g-use-dma from rockchip usb nodes | expand

Commit Message

Johan Jonker Feb. 28, 2020, 11:39 a.m. UTC
A test with the command below gives these errors:

arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml: usb@30180000:
'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30180000:
'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm/boot/dts/rk3228-evb.dt.yaml: usb@30040000:
'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm/boot/dts/rk3229-evb.dt.yaml: usb@30040000:
'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm/boot/dts/rk3229-xms6.dt.yaml: usb@30040000:
'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'

'g-use-dma' is not a valid option in dwc2.yaml, so remove it
from all Rockchip dtsi files.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 arch/arm/boot/dts/rk322x.dtsi | 1 -
 arch/arm/boot/dts/rv1108.dtsi | 1 -
 2 files changed, 2 deletions(-)

Comments

Heiko Stübner Feb. 29, 2020, 11:47 p.m. UTC | #1
Am Freitag, 28. Februar 2020, 12:39:21 CET schrieb Johan Jonker:
> A test with the command below gives these errors:
> 
> arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml: usb@30180000:
> 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
> arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30180000:
> 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
> arch/arm/boot/dts/rk3228-evb.dt.yaml: usb@30040000:
> 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
> arch/arm/boot/dts/rk3229-evb.dt.yaml: usb@30040000:
> 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
> arch/arm/boot/dts/rk3229-xms6.dt.yaml: usb@30040000:
> 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
> 
> 'g-use-dma' is not a valid option in dwc2.yaml, so remove it
> from all Rockchip dtsi files.
> 
> make ARCH=arm dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>

applied both patches for 5.7

Thanks
Heiko
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 4e90efdc9..dac930be3 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -718,7 +718,6 @@ 
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <280>;
 		g-tx-fifo-size = <256 128 128 64 32 16>;
-		g-use-dma;
 		phys = <&u2phy0_otg>;
 		phy-names = "usb2-phy";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 1fd06e7cb..9bb109d66 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -527,7 +527,6 @@ 
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <280>;
 		g-tx-fifo-size = <256 128 128 64 32 16>;
-		g-use-dma;
 		phys = <&u2phy_otg>;
 		phy-names = "usb2-phy";
 		status = "disabled";