| Message ID | 20200304131645.22057-1-rjliao@codeaurora.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 77131dfec6af114efd32610b4a6bbecd934e37d5 |
| Headers | show |
| Series | [v1] Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional() | expand |
Hi Rocky, > This patch replaces devm_gpiod_get() with devm_gpiod_get_optional() to get > bt_en and replaces devm_clk_get() with devm_clk_get_optional() to get > susclk. It also uses NULL check to determine whether the resource is > available or not. > > Fixes: 8a208b24d770 ("Bluetooth: hci_qca: Make bt_en and susclk not mandatory for QCA Rome") > Signed-off-by: Rocky Liao <rjliao@codeaurora.org> > --- > drivers/bluetooth/hci_qca.c | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) patch has been applied to bluetooth-next tree. Regards Marcel
On Wed, Mar 04, 2020 at 09:16:45PM +0800, Rocky Liao wrote: > This patch replaces devm_gpiod_get() with devm_gpiod_get_optional() to get > bt_en and replaces devm_clk_get() with devm_clk_get_optional() to get > susclk. It also uses NULL check to determine whether the resource is > available or not. > > Fixes: 8a208b24d770 ("Bluetooth: hci_qca: Make bt_en and susclk not mandatory for QCA Rome") > Signed-off-by: Rocky Liao <rjliao@codeaurora.org> > --- > drivers/bluetooth/hci_qca.c | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > @@ -1901,15 +1901,15 @@ static int qca_serdev_probe(struct serdev_device *serdev) > } > } else { > qcadev->btsoc_type = QCA_ROME; > - qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable", > + qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable", > GPIOD_OUT_LOW); > - if (IS_ERR(qcadev->bt_en)) { > + if (!qcadev->bt_en) { > dev_warn(&serdev->dev, "failed to acquire enable gpio\n"); Shouldn't this be dev_dbg() if the gpio is indeed optional? > power_ctrl_enabled = false; > } > > - qcadev->susclk = devm_clk_get(&serdev->dev, NULL); > - if (IS_ERR(qcadev->susclk)) { > + qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL); > + if (!qcadev->susclk) { > dev_warn(&serdev->dev, "failed to acquire clk\n"); Same here. > } else { > err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ); > @@ -1924,7 +1924,7 @@ static int qca_serdev_probe(struct serdev_device *serdev) > err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto); > if (err) { > BT_ERR("Rome serdev registration failed"); > - if (!IS_ERR(qcadev->susclk)) > + if (qcadev->susclk) > clk_disable_unprepare(qcadev->susclk); The clock framework allows you to pass in NULL precisely to be able to handle optional resources without sprinkling conditionals all over (the gpio subsystem does not however). Applies to clk_set_rate() etc. above as well. > return err; > } > @@ -1945,7 +1945,7 @@ static void qca_serdev_remove(struct serdev_device *serdev) > > if (qca_is_wcn399x(qcadev->btsoc_type)) > qca_power_shutdown(&qcadev->serdev_hu); > - else if (!IS_ERR(qcadev->susclk)) > + else if (qcadev->susclk) > clk_disable_unprepare(qcadev->susclk); Same here. > hci_uart_unregister_device(&qcadev->serdev_hu); Johan
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index 325baa046c3a..439392b1c043 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -1562,7 +1562,7 @@ static int qca_power_on(struct hci_dev *hdev) ret = qca_wcn3990_init(hu); } else { qcadev = serdev_device_get_drvdata(hu->serdev); - if (!IS_ERR(qcadev->bt_en)) { + if (qcadev->bt_en) { gpiod_set_value_cansleep(qcadev->bt_en, 1); /* Controller needs time to bootup. */ msleep(150); @@ -1752,7 +1752,7 @@ static void qca_power_shutdown(struct hci_uart *hu) host_set_baudrate(hu, 2400); qca_send_power_pulse(hu, false); qca_regulator_disable(qcadev); - } else if (!IS_ERR(qcadev->bt_en)) { + } else if (qcadev->bt_en) { gpiod_set_value_cansleep(qcadev->bt_en, 0); } } @@ -1901,15 +1901,15 @@ static int qca_serdev_probe(struct serdev_device *serdev) } } else { qcadev->btsoc_type = QCA_ROME; - qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable", + qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable", GPIOD_OUT_LOW); - if (IS_ERR(qcadev->bt_en)) { + if (!qcadev->bt_en) { dev_warn(&serdev->dev, "failed to acquire enable gpio\n"); power_ctrl_enabled = false; } - qcadev->susclk = devm_clk_get(&serdev->dev, NULL); - if (IS_ERR(qcadev->susclk)) { + qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL); + if (!qcadev->susclk) { dev_warn(&serdev->dev, "failed to acquire clk\n"); } else { err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ); @@ -1924,7 +1924,7 @@ static int qca_serdev_probe(struct serdev_device *serdev) err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto); if (err) { BT_ERR("Rome serdev registration failed"); - if (!IS_ERR(qcadev->susclk)) + if (qcadev->susclk) clk_disable_unprepare(qcadev->susclk); return err; } @@ -1945,7 +1945,7 @@ static void qca_serdev_remove(struct serdev_device *serdev) if (qca_is_wcn399x(qcadev->btsoc_type)) qca_power_shutdown(&qcadev->serdev_hu); - else if (!IS_ERR(qcadev->susclk)) + else if (qcadev->susclk) clk_disable_unprepare(qcadev->susclk); hci_uart_unregister_device(&qcadev->serdev_hu);
This patch replaces devm_gpiod_get() with devm_gpiod_get_optional() to get bt_en and replaces devm_clk_get() with devm_clk_get_optional() to get susclk. It also uses NULL check to determine whether the resource is available or not. Fixes: 8a208b24d770 ("Bluetooth: hci_qca: Make bt_en and susclk not mandatory for QCA Rome") Signed-off-by: Rocky Liao <rjliao@codeaurora.org> --- drivers/bluetooth/hci_qca.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)