| Message ID | 20200303101052.133631-1-kherbst@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v6] pci: prevent putting nvidia GPUs into lower device states on certain intel bridges | expand |
Hi, On Tue, Mar 03, 2020 at 11:10:52AM +0100, Karol Herbst wrote: > Fixes state transitions of Nvidia Pascal GPUs from D3cold into higher device > states. I think it is good to explain bit more here why this fix is needed. > v2: convert to pci_dev quirk > put a proper technical explanation of the issue as a in-code comment > v3: disable it only for certain combinations of intel and nvidia hardware > v4: simplify quirk by setting flag on the GPU itself > v5: restructure quirk to make it easier to add new IDs > fix whitespace issues > fix potential NULL pointer access > update the quirk documentation > v6: move quirk into nouveau This information typically goes under the '---' line. > Signed-off-by: Karol Herbst <kherbst@redhat.com> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Lyude Paul <lyude@redhat.com> > Cc: Rafael J. Wysocki <rjw@rjwysocki.net> > Cc: Mika Westerberg <mika.westerberg@intel.com> I have few minor comments but regardless, Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> > Cc: linux-pci@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: nouveau@lists.freedesktop.org > Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205623 > --- > drivers/gpu/drm/nouveau/nouveau_drm.c | 56 +++++++++++++++++++++++++++ > drivers/pci/pci.c | 8 ++++ > include/linux/pci.h | 1 + > 3 files changed, 65 insertions(+) > > diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c > index 2cd83849600f..51d3a7ba7731 100644 > --- a/drivers/gpu/drm/nouveau/nouveau_drm.c > +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c > @@ -618,6 +618,59 @@ nouveau_drm_device_fini(struct drm_device *dev) > kfree(drm); > } > > +/* > + * On some Intel PCIe bridge controllers doing a > + * D0 -> D3hot -> D3cold -> D0 sequence causes Nvidia GPUs to not reappear. > + * Skipping the intermediate D3hot step seems to make it work again. Thise is ^^^^^ Thise -> This > + * probably caused by not meeting the expectation the involved AML code has > + * when the GPU is put into D3hot state before invoking it. > + * > + * This leads to various manifestations of this issue: > + * - AML code execution to power on the GPU hits an infinite loop (as the > + * code waits on device memory to change). > + * - kernel crashes, as all PCI reads return -1, which most code isn't able > + * to handle well enough. > + * > + * In all cases dmesg will contain at least one line like this: > + * 'nouveau 0000:01:00.0: Refused to change power state, currently in D3' > + * followed by a lot of nouveau timeouts. > + * > + * In the \_SB.PCI0.PEG0.PG00._OFF code deeper down writes bit 0x80 to the not > + * documented PCI config space register 0x248 of the Intel PCIe bridge > + * controller (0x1901) in order to change the state of the PCIe link between > + * the PCIe port and the GPU. There are alternative code paths using other > + * registers, which seem to work fine (executed pre Windows 8): > + * - 0xbc bit 0x20 (publicly available documentation claims 'reserved') > + * - 0xb0 bit 0x10 (link disable) > + * Changing the conditions inside the firmware by poking into the relevant > + * addresses does resolve the issue, but it seemed to be ACPI private memory > + * and not any device accessible memory at all, so there is no portable way of > + * changing the conditions. > + * On a XPS 9560 that means bits [0,3] on \CPEX need to be cleared. > + * > + * The only systems where this behavior can be seen are hybrid graphics laptops > + * with a secondary Nvidia Maxwell, Pascal or Turing GPU. Its unclear wheather ^^^ ^^^^^^^^ Its -> It's wheather -> whether > + * this issue only occurs in combination with listed Intel PCIe bridge > + * controllers and the mentioned GPUs or other devices as well. > + * > + * documentation on the PCIe bridge controller can be found in the > + * "7th Generation Intel® Processor Families for H Platforms Datasheet Volume 2" > + * Section "12 PCI Express* Controller (x16) Registers" > + */ > + > +static void quirk_broken_nv_runpm(struct pci_dev *dev) > +{ > + struct pci_dev *bridge = pci_upstream_bridge(dev); > + > + if (!bridge || bridge->vendor != PCI_VENDOR_ID_INTEL) > + return; > + > + switch (bridge->device) { > + case 0x1901: > + dev->parent_d3cold = 1; I think it is better to add break; here. > + } > +} > + > static int nouveau_drm_probe(struct pci_dev *pdev, > const struct pci_device_id *pent) > { > @@ -699,6 +752,7 @@ static int nouveau_drm_probe(struct pci_dev *pdev, > if (ret) > goto fail_drm_dev_init; > > + quirk_broken_nv_runpm(pdev); > return 0; > > fail_drm_dev_init: > @@ -737,6 +791,8 @@ nouveau_drm_remove(struct pci_dev *pdev) > { > struct drm_device *dev = pci_get_drvdata(pdev); > > + /* revert our workaround */ > + pdev->parent_d3cold = false; > nouveau_drm_device_remove(dev); > } > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 951099279192..6ece05723fa2 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -860,6 +860,14 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) > || (state == PCI_D2 && !dev->d2_support)) > return -EIO; > > + /* > + * Power management can be disabled for certain devices as they don't > + * come back up later on runtime_resume. We rely on platform means to > + * cut power consumption instead (e.g. ACPI). > + */ > + if (state != PCI_D0 && dev->parent_d3cold) > + return 0; > + > pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); > if (pmcsr == (u16) ~0) { > pci_err(dev, "can't change power state from %s to %s (config space inaccessible)\n", > diff --git a/include/linux/pci.h b/include/linux/pci.h > index 930fab293073..3e5938b91966 100644 > --- a/include/linux/pci.h > +++ b/include/linux/pci.h > @@ -340,6 +340,7 @@ struct pci_dev { > unsigned int no_d3cold:1; /* D3cold is forbidden */ > unsigned int bridge_d3:1; /* Allow D3 for bridge */ > unsigned int d3cold_allowed:1; /* D3cold is allowed by user */ > + unsigned int parent_d3cold:1; /* power manage the parent instead */ Just to be consistent with the other comments, start with a capital letter: unsigned int parent_d3cold:1; /* Power manage the parent instead */
On Wed, Mar 4, 2020 at 10:33 AM Mika Westerberg <mika.westerberg@intel.com> wrote: > > Hi, > > On Tue, Mar 03, 2020 at 11:10:52AM +0100, Karol Herbst wrote: > > Fixes state transitions of Nvidia Pascal GPUs from D3cold into higher device > > states. > > I think it is good to explain bit more here why this fix is needed. > is something like this fine? Fixes the infamous 'runpm' bug many users are facing on Laptops with Nvidia Pascal GPUs by skipping PCI power state changes on the GPU. It's still unknown why this issue exists, but this is a reliable workaround and solves a very annoying issue for user having to choose between a crashing kernel or higher power consumption of their Laptops. > > v2: convert to pci_dev quirk > > put a proper technical explanation of the issue as a in-code comment > > v3: disable it only for certain combinations of intel and nvidia hardware > > v4: simplify quirk by setting flag on the GPU itself > > v5: restructure quirk to make it easier to add new IDs > > fix whitespace issues > > fix potential NULL pointer access > > update the quirk documentation > > v6: move quirk into nouveau > > This information typically goes under the '---' line. > > > Signed-off-by: Karol Herbst <kherbst@redhat.com> > > Cc: Bjorn Helgaas <bhelgaas@google.com> > > Cc: Lyude Paul <lyude@redhat.com> > > Cc: Rafael J. Wysocki <rjw@rjwysocki.net> > > Cc: Mika Westerberg <mika.westerberg@intel.com> > > I have few minor comments but regardless, > > Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> > > > Cc: linux-pci@vger.kernel.org > > Cc: linux-pm@vger.kernel.org > > Cc: dri-devel@lists.freedesktop.org > > Cc: nouveau@lists.freedesktop.org > > Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205623 > > --- > > drivers/gpu/drm/nouveau/nouveau_drm.c | 56 +++++++++++++++++++++++++++ > > drivers/pci/pci.c | 8 ++++ > > include/linux/pci.h | 1 + > > 3 files changed, 65 insertions(+) > > > > diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c > > index 2cd83849600f..51d3a7ba7731 100644 > > --- a/drivers/gpu/drm/nouveau/nouveau_drm.c > > +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c > > @@ -618,6 +618,59 @@ nouveau_drm_device_fini(struct drm_device *dev) > > kfree(drm); > > } > > > > +/* > > + * On some Intel PCIe bridge controllers doing a > > + * D0 -> D3hot -> D3cold -> D0 sequence causes Nvidia GPUs to not reappear. > > + * Skipping the intermediate D3hot step seems to make it work again. Thise is > ^^^^^ > Thise -> This > > > + * probably caused by not meeting the expectation the involved AML code has > > + * when the GPU is put into D3hot state before invoking it. > > + * > > + * This leads to various manifestations of this issue: > > + * - AML code execution to power on the GPU hits an infinite loop (as the > > + * code waits on device memory to change). > > + * - kernel crashes, as all PCI reads return -1, which most code isn't able > > + * to handle well enough. > > + * > > + * In all cases dmesg will contain at least one line like this: > > + * 'nouveau 0000:01:00.0: Refused to change power state, currently in D3' > > + * followed by a lot of nouveau timeouts. > > + * > > + * In the \_SB.PCI0.PEG0.PG00._OFF code deeper down writes bit 0x80 to the not > > + * documented PCI config space register 0x248 of the Intel PCIe bridge > > + * controller (0x1901) in order to change the state of the PCIe link between > > + * the PCIe port and the GPU. There are alternative code paths using other > > + * registers, which seem to work fine (executed pre Windows 8): > > + * - 0xbc bit 0x20 (publicly available documentation claims 'reserved') > > + * - 0xb0 bit 0x10 (link disable) > > + * Changing the conditions inside the firmware by poking into the relevant > > + * addresses does resolve the issue, but it seemed to be ACPI private memory > > + * and not any device accessible memory at all, so there is no portable way of > > + * changing the conditions. > > + * On a XPS 9560 that means bits [0,3] on \CPEX need to be cleared. > > + * > > + * The only systems where this behavior can be seen are hybrid graphics laptops > > + * with a secondary Nvidia Maxwell, Pascal or Turing GPU. Its unclear wheather > ^^^ ^^^^^^^^ > Its -> It's > wheather -> whether > > > + * this issue only occurs in combination with listed Intel PCIe bridge > > + * controllers and the mentioned GPUs or other devices as well. > > + * > > + * documentation on the PCIe bridge controller can be found in the > > + * "7th Generation Intel® Processor Families for H Platforms Datasheet Volume 2" > > + * Section "12 PCI Express* Controller (x16) Registers" > > + */ > > + > > +static void quirk_broken_nv_runpm(struct pci_dev *dev) > > +{ > > + struct pci_dev *bridge = pci_upstream_bridge(dev); > > + > > + if (!bridge || bridge->vendor != PCI_VENDOR_ID_INTEL) > > + return; > > + > > + switch (bridge->device) { > > + case 0x1901: > > + dev->parent_d3cold = 1; > > I think it is better to add > > break; > > here. > > > + } > > +} > > + > > static int nouveau_drm_probe(struct pci_dev *pdev, > > const struct pci_device_id *pent) > > { > > @@ -699,6 +752,7 @@ static int nouveau_drm_probe(struct pci_dev *pdev, > > if (ret) > > goto fail_drm_dev_init; > > > > + quirk_broken_nv_runpm(pdev); > > return 0; > > > > fail_drm_dev_init: > > @@ -737,6 +791,8 @@ nouveau_drm_remove(struct pci_dev *pdev) > > { > > struct drm_device *dev = pci_get_drvdata(pdev); > > > > + /* revert our workaround */ > > + pdev->parent_d3cold = false; > > nouveau_drm_device_remove(dev); > > } > > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > index 951099279192..6ece05723fa2 100644 > > --- a/drivers/pci/pci.c > > +++ b/drivers/pci/pci.c > > @@ -860,6 +860,14 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) > > || (state == PCI_D2 && !dev->d2_support)) > > return -EIO; > > > > + /* > > + * Power management can be disabled for certain devices as they don't > > + * come back up later on runtime_resume. We rely on platform means to > > + * cut power consumption instead (e.g. ACPI). > > + */ > > + if (state != PCI_D0 && dev->parent_d3cold) > > + return 0; > > + > > pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); > > if (pmcsr == (u16) ~0) { > > pci_err(dev, "can't change power state from %s to %s (config space inaccessible)\n", > > diff --git a/include/linux/pci.h b/include/linux/pci.h > > index 930fab293073..3e5938b91966 100644 > > --- a/include/linux/pci.h > > +++ b/include/linux/pci.h > > @@ -340,6 +340,7 @@ struct pci_dev { > > unsigned int no_d3cold:1; /* D3cold is forbidden */ > > unsigned int bridge_d3:1; /* Allow D3 for bridge */ > > unsigned int d3cold_allowed:1; /* D3cold is allowed by user */ > > + unsigned int parent_d3cold:1; /* power manage the parent instead */ > > Just to be consistent with the other comments, start with a capital > letter: > > unsigned int parent_d3cold:1; /* Power manage the parent instead */ >
On Thu, Mar 05, 2020 at 05:11:57PM +0100, Karol Herbst wrote: > On Wed, Mar 4, 2020 at 10:33 AM Mika Westerberg > <mika.westerberg@intel.com> wrote: > > > > Hi, > > > > On Tue, Mar 03, 2020 at 11:10:52AM +0100, Karol Herbst wrote: > > > Fixes state transitions of Nvidia Pascal GPUs from D3cold into higher device > > > states. > > > > I think it is good to explain bit more here why this fix is needed. > > > > is something like this fine? > > Fixes the infamous 'runpm' bug many users are facing on Laptops with Nvidia > Pascal GPUs by skipping PCI power state changes on the GPU. I would open up 'runpm' -> runtime PM. > It's still unknown why this issue exists, but this is a reliable workaround > and solves a very annoying issue for user having to choose between a > crashing kernel or higher power consumption of their Laptops. Also I think it would be good to include a short log snippet how this manifests and in what kind of scenario it happens.
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 2cd83849600f..51d3a7ba7731 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -618,6 +618,59 @@ nouveau_drm_device_fini(struct drm_device *dev) kfree(drm); } +/* + * On some Intel PCIe bridge controllers doing a + * D0 -> D3hot -> D3cold -> D0 sequence causes Nvidia GPUs to not reappear. + * Skipping the intermediate D3hot step seems to make it work again. Thise is + * probably caused by not meeting the expectation the involved AML code has + * when the GPU is put into D3hot state before invoking it. + * + * This leads to various manifestations of this issue: + * - AML code execution to power on the GPU hits an infinite loop (as the + * code waits on device memory to change). + * - kernel crashes, as all PCI reads return -1, which most code isn't able + * to handle well enough. + * + * In all cases dmesg will contain at least one line like this: + * 'nouveau 0000:01:00.0: Refused to change power state, currently in D3' + * followed by a lot of nouveau timeouts. + * + * In the \_SB.PCI0.PEG0.PG00._OFF code deeper down writes bit 0x80 to the not + * documented PCI config space register 0x248 of the Intel PCIe bridge + * controller (0x1901) in order to change the state of the PCIe link between + * the PCIe port and the GPU. There are alternative code paths using other + * registers, which seem to work fine (executed pre Windows 8): + * - 0xbc bit 0x20 (publicly available documentation claims 'reserved') + * - 0xb0 bit 0x10 (link disable) + * Changing the conditions inside the firmware by poking into the relevant + * addresses does resolve the issue, but it seemed to be ACPI private memory + * and not any device accessible memory at all, so there is no portable way of + * changing the conditions. + * On a XPS 9560 that means bits [0,3] on \CPEX need to be cleared. + * + * The only systems where this behavior can be seen are hybrid graphics laptops + * with a secondary Nvidia Maxwell, Pascal or Turing GPU. Its unclear wheather + * this issue only occurs in combination with listed Intel PCIe bridge + * controllers and the mentioned GPUs or other devices as well. + * + * documentation on the PCIe bridge controller can be found in the + * "7th Generation Intel® Processor Families for H Platforms Datasheet Volume 2" + * Section "12 PCI Express* Controller (x16) Registers" + */ + +static void quirk_broken_nv_runpm(struct pci_dev *dev) +{ + struct pci_dev *bridge = pci_upstream_bridge(dev); + + if (!bridge || bridge->vendor != PCI_VENDOR_ID_INTEL) + return; + + switch (bridge->device) { + case 0x1901: + dev->parent_d3cold = 1; + } +} + static int nouveau_drm_probe(struct pci_dev *pdev, const struct pci_device_id *pent) { @@ -699,6 +752,7 @@ static int nouveau_drm_probe(struct pci_dev *pdev, if (ret) goto fail_drm_dev_init; + quirk_broken_nv_runpm(pdev); return 0; fail_drm_dev_init: @@ -737,6 +791,8 @@ nouveau_drm_remove(struct pci_dev *pdev) { struct drm_device *dev = pci_get_drvdata(pdev); + /* revert our workaround */ + pdev->parent_d3cold = false; nouveau_drm_device_remove(dev); } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 951099279192..6ece05723fa2 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -860,6 +860,14 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) || (state == PCI_D2 && !dev->d2_support)) return -EIO; + /* + * Power management can be disabled for certain devices as they don't + * come back up later on runtime_resume. We rely on platform means to + * cut power consumption instead (e.g. ACPI). + */ + if (state != PCI_D0 && dev->parent_d3cold) + return 0; + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); if (pmcsr == (u16) ~0) { pci_err(dev, "can't change power state from %s to %s (config space inaccessible)\n", diff --git a/include/linux/pci.h b/include/linux/pci.h index 930fab293073..3e5938b91966 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -340,6 +340,7 @@ struct pci_dev { unsigned int no_d3cold:1; /* D3cold is forbidden */ unsigned int bridge_d3:1; /* Allow D3 for bridge */ unsigned int d3cold_allowed:1; /* D3cold is allowed by user */ + unsigned int parent_d3cold:1; /* power manage the parent instead */ unsigned int mmio_always_on:1; /* Disallow turning off io/mem decoding during BAR sizing */ unsigned int wakeup_prepared:1;
Fixes state transitions of Nvidia Pascal GPUs from D3cold into higher device states. v2: convert to pci_dev quirk put a proper technical explanation of the issue as a in-code comment v3: disable it only for certain combinations of intel and nvidia hardware v4: simplify quirk by setting flag on the GPU itself v5: restructure quirk to make it easier to add new IDs fix whitespace issues fix potential NULL pointer access update the quirk documentation v6: move quirk into nouveau Signed-off-by: Karol Herbst <kherbst@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Mika Westerberg <mika.westerberg@intel.com> Cc: linux-pci@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205623 --- drivers/gpu/drm/nouveau/nouveau_drm.c | 56 +++++++++++++++++++++++++++ drivers/pci/pci.c | 8 ++++ include/linux/pci.h | 1 + 3 files changed, 65 insertions(+)