| Message ID | 1583336650-25848-1-git-send-email-marian-cristian.rotariu.rb@bp.renesas.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 99ae78f1fc3a73c88fe726c676ae963ce722bf20 |
| Headers | show |
| Series | [v2] ARM: dts: iwg22d-sodimm: Enable touchscreen | expand |
Hi Marian, On Wed, Mar 4, 2020 at 4:44 PM Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> wrote: > In one of the iWave-G22D development board variants, called Generic SODIMM > Development Platform, we have an LCD with touchscreen. The resistive touch > controller, STMPE811 is on the development board and is connected through > the i2c5 of the RZ-G1E. > > Additionally, this controller should generate an interrupt to the CPU and > it is connected through GPIO4,4 to the GIC. > > Touch was tested with one of our iW-RainboW-G22D-SODIMM RZ/G1E development > platforms. > > More details on the iWave website: > https://www.iwavesystems.com/rz-g1e-sodimm-development-kit.html > > Changes from v1: > -remove redundant GPIO code > -remove obsolete and unused properties > -sync property values with the comments & the bindings Thanks for the update! > Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> i.e. will queue in renesas-devel for v5.7. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 872f8a6..ab38b39 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -172,6 +172,39 @@ status = "okay"; clock-frequency = <400000>; + stmpe811@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + interrupt-parent = <&gpio4>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; #sound-dai-cells = <0>;
In one of the iWave-G22D development board variants, called Generic SODIMM Development Platform, we have an LCD with touchscreen. The resistive touch controller, STMPE811 is on the development board and is connected through the i2c5 of the RZ-G1E. Additionally, this controller should generate an interrupt to the CPU and it is connected through GPIO4,4 to the GIC. Touch was tested with one of our iW-RainboW-G22D-SODIMM RZ/G1E development platforms. More details on the iWave website: https://www.iwavesystems.com/rz-g1e-sodimm-development-kit.html Changes from v1: -remove redundant GPIO code -remove obsolete and unused properties -sync property values with the comments & the bindings Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> --- arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 33 +++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)