| Message ID | 20200309134020.14935-1-jbx6244@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC] ARM: dts: rockchip: remove #dma-cells from dma client nodes for rv1108 | expand |
Am Montag, 9. März 2020, 14:40:20 CET schrieb Johan Jonker: > When we combine spi-rockchip.yaml and > spi-controller.yaml and add 'additionalProperties: false' > it gives for example this error: > > arch/arm/boot/dts/rv1108-evb.dt.yaml: spi@10270000: > '#dma-cells' does not match any of the regexes: > '^.*@[0-9a-f]+$', '^slave$' > > '#dma-cells' are not used for dma clients, so remove them all. > > make ARCH=arm dtbs_check > DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-rockchip.yaml > > Signed-off-by: Johan Jonker <jbx6244@gmail.com> applied for 5.7 Thanks Heiko
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 59295babd..fda16f976 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -120,7 +120,6 @@ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; clock-names = "baudclk", "apb_pclk"; dmas = <&pdma 6>, <&pdma 7>; - #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart2m0_xfer>; status = "disabled"; @@ -136,7 +135,6 @@ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; dmas = <&pdma 4>, <&pdma 5>; - #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; status = "disabled"; @@ -152,7 +150,6 @@ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; dmas = <&pdma 2>, <&pdma 3>; - #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "disabled"; @@ -208,7 +205,6 @@ clock-names = "spiclk", "apb_pclk"; dmas = <&pdma 8>, <&pdma 9>; dma-names = "tx", "rx"; - #dma-cells = <2>; #address-cells = <1>; #size-cells = <0>; status = "disabled";
When we combine spi-rockchip.yaml and spi-controller.yaml and add 'additionalProperties: false' it gives for example this error: arch/arm/boot/dts/rv1108-evb.dt.yaml: spi@10270000: '#dma-cells' does not match any of the regexes: '^.*@[0-9a-f]+$', '^slave$' '#dma-cells' are not used for dma clients, so remove them all. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-rockchip.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- arch/arm/boot/dts/rv1108.dtsi | 4 ---- 1 file changed, 4 deletions(-)