diff mbox series

[07/15] arm64: defconfig: Enable QorIQ cpufreq driver

Message ID 1582585690-463-8-git-send-email-leoyang.li@nxp.com (mailing list archive)
State Mainlined
Commit 3c77543d9bd7af910dd8e9aa9f6b4ac320b3e4d9
Headers show
Series Enable drivers for NXP/FSL QorIQ arm64 boards | expand

Commit Message

Leo Li Feb. 24, 2020, 11:08 p.m. UTC 
Enables the generic QorIQ cpufreq driver to support frequency scaling
for various QorIQ SoCs.  Enabled as built-in as it is a core feature.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm64/configs/defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Shawn Guo March 11, 2020, 6:12 a.m. UTC | #1 
On Mon, Feb 24, 2020 at 05:08:02PM -0600, Li Yang wrote:
> Enables the generic QorIQ cpufreq driver to support frequency scaling
> for various QorIQ SoCs.  Enabled as built-in as it is a core feature.
> 
> Signed-off-by: Li Yang <leoyang.li@nxp.com>
> ---
>  arch/arm64/configs/defconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index e97ef8b944b8..996dc749ea5c 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -90,6 +90,7 @@ CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
>  CONFIG_ARM_QCOM_CPUFREQ_HW=y
>  CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
>  CONFIG_ARM_TEGRA186_CPUFREQ=y
> +CONFIG_QORIQ_CPUFREQ=y
>  CONFIG_ARM_SCPI_PROTOCOL=y
>  CONFIG_RASPBERRYPI_FIRMWARE=y
>  CONFIG_INTEL_STRATIX10_SERVICE=y
> @@ -722,7 +723,6 @@ CONFIG_COMMON_CLK_RK808=y
>  CONFIG_COMMON_CLK_SCPI=y
>  CONFIG_COMMON_CLK_CS2000_CP=y
>  CONFIG_COMMON_CLK_S2MPS11=y
> -CONFIG_CLK_QORIQ=y

Why is this getting removed?

Shawn

>  CONFIG_COMMON_CLK_PWM=y
>  CONFIG_CLK_RASPBERRYPI=m
>  CONFIG_CLK_IMX8MM=y
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Leo Li March 11, 2020, 6:54 p.m. UTC | #2 
> -----Original Message-----
> From: Shawn Guo <shawnguo@kernel.org>
> Sent: Wednesday, March 11, 2020 1:12 AM
> To: Leo Li <leoyang.li@nxp.com>
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq driver
> 
> On Mon, Feb 24, 2020 at 05:08:02PM -0600, Li Yang wrote:
> > Enables the generic QorIQ cpufreq driver to support frequency scaling
> > for various QorIQ SoCs.  Enabled as built-in as it is a core feature.
> >
> > Signed-off-by: Li Yang <leoyang.li@nxp.com>
> > ---
> >  arch/arm64/configs/defconfig | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> > index e97ef8b944b8..996dc749ea5c 100644
> > --- a/arch/arm64/configs/defconfig
> > +++ b/arch/arm64/configs/defconfig
> > @@ -90,6 +90,7 @@ CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
> >  CONFIG_ARM_QCOM_CPUFREQ_HW=y
> >  CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
> >  CONFIG_ARM_TEGRA186_CPUFREQ=y
> > +CONFIG_QORIQ_CPUFREQ=y
> >  CONFIG_ARM_SCPI_PROTOCOL=y
> >  CONFIG_RASPBERRYPI_FIRMWARE=y
> >  CONFIG_INTEL_STRATIX10_SERVICE=y
> > @@ -722,7 +723,6 @@ CONFIG_COMMON_CLK_RK808=y
> >  CONFIG_COMMON_CLK_SCPI=y
> >  CONFIG_COMMON_CLK_CS2000_CP=y
> >  CONFIG_COMMON_CLK_S2MPS11=y
> > -CONFIG_CLK_QORIQ=y
> 
> Why is this getting removed?

Newly added QORIQ_CPUFREQ selects CLK_QORIQ, so it is removed by savedefconfig.

Regards,
Leo

> 
> Shawn
> 
> >  CONFIG_COMMON_CLK_PWM=y
> >  CONFIG_CLK_RASPBERRYPI=m
> >  CONFIG_CLK_IMX8MM=y
> > --
> > 2.17.1
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> >
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.inf
> radead.org%2Fmailman%2Flistinfo%2Flinux-arm-
> kernel&amp;data=02%7C01%7Cleoyang.li%40nxp.com%7C9fc5f6a95bf74523
> 717708d7c5832d15%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C
> 637195039498757892&amp;sdata=nsR%2F3bVYD61W2%2BE393dhJNgKCp%2
> FfvH9cYSdRLckOxns%3D&amp;reserved=0
Shawn Guo March 12, 2020, 2:22 p.m. UTC | #3 
On Wed, Mar 11, 2020 at 06:54:00PM +0000, Leo Li wrote:
> 
> 
> > -----Original Message-----
> > From: Shawn Guo <shawnguo@kernel.org>
> > Sent: Wednesday, March 11, 2020 1:12 AM
> > To: Leo Li <leoyang.li@nxp.com>
> > Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> > Subject: Re: [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq driver
> > 
> > On Mon, Feb 24, 2020 at 05:08:02PM -0600, Li Yang wrote:
> > > Enables the generic QorIQ cpufreq driver to support frequency scaling
> > > for various QorIQ SoCs.  Enabled as built-in as it is a core feature.
> > >
> > > Signed-off-by: Li Yang <leoyang.li@nxp.com>
> > > ---
> > >  arch/arm64/configs/defconfig | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> > > index e97ef8b944b8..996dc749ea5c 100644
> > > --- a/arch/arm64/configs/defconfig
> > > +++ b/arch/arm64/configs/defconfig
> > > @@ -90,6 +90,7 @@ CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
> > >  CONFIG_ARM_QCOM_CPUFREQ_HW=y
> > >  CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
> > >  CONFIG_ARM_TEGRA186_CPUFREQ=y
> > > +CONFIG_QORIQ_CPUFREQ=y
> > >  CONFIG_ARM_SCPI_PROTOCOL=y
> > >  CONFIG_RASPBERRYPI_FIRMWARE=y
> > >  CONFIG_INTEL_STRATIX10_SERVICE=y
> > > @@ -722,7 +723,6 @@ CONFIG_COMMON_CLK_RK808=y
> > >  CONFIG_COMMON_CLK_SCPI=y
> > >  CONFIG_COMMON_CLK_CS2000_CP=y
> > >  CONFIG_COMMON_CLK_S2MPS11=y
> > > -CONFIG_CLK_QORIQ=y
> > 
> > Why is this getting removed?
> 
> Newly added QORIQ_CPUFREQ selects CLK_QORIQ, so it is removed by savedefconfig.

Note it in the commit log please.

Shawn
Leo Li March 12, 2020, 4:31 p.m. UTC | #4 
> -----Original Message-----
> From: Shawn Guo <shawnguo@kernel.org>
> Sent: Thursday, March 12, 2020 9:23 AM
> To: Leo Li <leoyang.li@nxp.com>
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq driver
> 
> On Wed, Mar 11, 2020 at 06:54:00PM +0000, Leo Li wrote:
> >
> >
> > > -----Original Message-----
> > > From: Shawn Guo <shawnguo@kernel.org>
> > > Sent: Wednesday, March 11, 2020 1:12 AM
> > > To: Leo Li <leoyang.li@nxp.com>
> > > Cc: linux-arm-kernel@lists.infradead.org;
> > > linux-kernel@vger.kernel.org
> > > Subject: Re: [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq
> > > driver
> > >
> > > On Mon, Feb 24, 2020 at 05:08:02PM -0600, Li Yang wrote:
> > > > Enables the generic QorIQ cpufreq driver to support frequency
> > > > scaling for various QorIQ SoCs.  Enabled as built-in as it is a core feature.
> > > >
> > > > Signed-off-by: Li Yang <leoyang.li@nxp.com>
> > > > ---
> > > >  arch/arm64/configs/defconfig | 2 +-
> > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > diff --git a/arch/arm64/configs/defconfig
> > > > b/arch/arm64/configs/defconfig index e97ef8b944b8..996dc749ea5c
> > > > 100644
> > > > --- a/arch/arm64/configs/defconfig
> > > > +++ b/arch/arm64/configs/defconfig
> > > > @@ -90,6 +90,7 @@ CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
> > > > CONFIG_ARM_QCOM_CPUFREQ_HW=y
> CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
> > > > CONFIG_ARM_TEGRA186_CPUFREQ=y
> > > > +CONFIG_QORIQ_CPUFREQ=y
> > > >  CONFIG_ARM_SCPI_PROTOCOL=y
> > > >  CONFIG_RASPBERRYPI_FIRMWARE=y
> > > >  CONFIG_INTEL_STRATIX10_SERVICE=y
> > > > @@ -722,7 +723,6 @@ CONFIG_COMMON_CLK_RK808=y
> > > > CONFIG_COMMON_CLK_SCPI=y
> CONFIG_COMMON_CLK_CS2000_CP=y
> > > > CONFIG_COMMON_CLK_S2MPS11=y -CONFIG_CLK_QORIQ=y
> > >
> > > Why is this getting removed?
> >
> > Newly added QORIQ_CPUFREQ selects CLK_QORIQ, so it is removed by
> savedefconfig.
> 
> Note it in the commit log please.

Sure.  Already in v2.

Regards,
Leo
diff mbox series

Patch

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index e97ef8b944b8..996dc749ea5c 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -90,6 +90,7 @@  CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
 CONFIG_ARM_QCOM_CPUFREQ_HW=y
 CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
 CONFIG_ARM_TEGRA186_CPUFREQ=y
+CONFIG_QORIQ_CPUFREQ=y
 CONFIG_ARM_SCPI_PROTOCOL=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_INTEL_STRATIX10_SERVICE=y
@@ -722,7 +723,6 @@  CONFIG_COMMON_CLK_RK808=y
 CONFIG_COMMON_CLK_SCPI=y
 CONFIG_COMMON_CLK_CS2000_CP=y
 CONFIG_COMMON_CLK_S2MPS11=y
-CONFIG_CLK_QORIQ=y
 CONFIG_COMMON_CLK_PWM=y
 CONFIG_CLK_RASPBERRYPI=m
 CONFIG_CLK_IMX8MM=y