| Message ID | 20200310194854.831-6-linux.amoon@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Add support for FSYS power domain and enable suspend clk for Exynos542x SoC | expand |
On Tue, Mar 10, 2020 at 07:48:54PM +0000, Anand Moon wrote: > FSYS power domain support usbdrd3, pdma and usb2 power gaiting, > hence move FSYS clk setting to sub-CMU block to support power domain > on/off sequences for device nodes. > > Signed-off-by: Anand Moon <linux.amoon@gmail.com> > --- > New patch in the series > --- > drivers/clk/samsung/clk-exynos5420.c | 45 +++++++++++++++++++++------- > 1 file changed, 34 insertions(+), 11 deletions(-) > > diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c > index c9e5a1fb6653..6c4c47dfcdce 100644 > --- a/drivers/clk/samsung/clk-exynos5420.c > +++ b/drivers/clk/samsung/clk-exynos5420.c > @@ -859,12 +859,6 @@ static const struct samsung_div_clock exynos5x_div_clks[] __initconst = { > DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4), > DIV(0, "dout_maupcm0", "dout_maudio0", DIV_MAU, 24, 8), > > - /* USB3.0 */ > - DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), > - DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), > - DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), > - DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), According to clock diagram these are still in CMU TOP, not FSYS. > - > /* MMC */ > DIV(0, "dout_mmc0", "mout_mmc0", DIV_FSYS1, 0, 10), > DIV(0, "dout_mmc1", "mout_mmc1", DIV_FSYS1, 10, 10), > @@ -1031,8 +1025,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { /> > /* FSYS Block */ > GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0), > - GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), > - GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), > GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0), > GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0), > GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0), > @@ -1040,9 +1032,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { > GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0), > GATE(CLK_SROMC, "sromc", "aclk200_fsys2", > GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0), > - GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), > - GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), > - GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), > GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro", > SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), > > @@ -1258,6 +1247,28 @@ static struct exynos5_subcmu_reg_dump exynos5x_gsc_suspend_regs[] = { > { DIV2_RATIO0, 0, 0x30 }, /* DIV dout_gscl_blk_300 */ > }; > > +/* USB3.0 */ > +static const struct samsung_div_clock exynos5x_fsys_div_clks[] __initconst = { > + DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), > + DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), > + DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), > + DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), > +}; > + > +static const struct samsung_gate_clock exynos5x_fsys_gate_clks[] __initconst = { > + GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), > + GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), > + GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), > + GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), > + GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), > +}; > + > +static struct exynos5_subcmu_reg_dump exynos5x_fsys_suspend_regs[] = { > + { GATE_IP_FSYS, 0xffffffff, 0xffffffff }, /* FSYS gates */ This looks wrong. GATE_IP_FSYS has fields also for FSYS2 clocks which you are not suspending. They do not belong to this CMU. Don't you need to save also parts of GATE_BUS_FSYS0? > + { SRC_TOP3, 0, BIT(24) }, /* SW_MUX_PCLK_200_FSYS_SEL */ > + { SRC_TOP3, 0, BIT(28) }, /* SW_MUX_ACLK_200_FSYS_SEL */ Name of clocks from the driver please, not from datasheet. Look at other examples. Best regards, Krzysztof > +}; > + > static const struct samsung_gate_clock exynos5x_g3d_gate_clks[] __initconst = { > GATE(CLK_G3D, "g3d", "mout_user_aclk_g3d", GATE_IP_G3D, 9, > CLK_SET_RATE_PARENT, 0), > @@ -1376,12 +1387,23 @@ static const struct exynos5_subcmu_info exynos5800_mau_subcmu = { > .pd_name = "MAU", > }; > > +static const struct exynos5_subcmu_info exynos5x_fsys_subcmu = { > + .div_clks = exynos5x_fsys_div_clks, > + .nr_div_clks = ARRAY_SIZE(exynos5x_fsys_div_clks), > + .gate_clks = exynos5x_fsys_gate_clks, > + .nr_gate_clks = ARRAY_SIZE(exynos5x_fsys_gate_clks), > + .suspend_regs = exynos5x_fsys_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(exynos5x_fsys_suspend_regs), > + .pd_name = "FSYS", > +}; > + > static const struct exynos5_subcmu_info *exynos5x_subcmus[] = { > &exynos5x_disp_subcmu, > &exynos5x_gsc_subcmu, > &exynos5x_g3d_subcmu, > &exynos5x_mfc_subcmu, > &exynos5x_mscl_subcmu, > + &exynos5x_fsys_subcmu, > }; > > static const struct exynos5_subcmu_info *exynos5800_subcmus[] = { > @@ -1391,6 +1413,7 @@ static const struct exynos5_subcmu_info *exynos5800_subcmus[] = { > &exynos5x_mfc_subcmu, > &exynos5x_mscl_subcmu, > &exynos5800_mau_subcmu, > + &exynos5x_fsys_subcmu, > }; > > static const struct samsung_pll_rate_table exynos5420_pll2550x_24mhz_tbl[] __initconst = { > -- > 2.25.1 >
Hi Krzysztof, Thanks for your review comments. On Wed, 11 Mar 2020 at 20:12, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > On Tue, Mar 10, 2020 at 07:48:54PM +0000, Anand Moon wrote: > > FSYS power domain support usbdrd3, pdma and usb2 power gaiting, > > hence move FSYS clk setting to sub-CMU block to support power domain > > on/off sequences for device nodes. > > > > Signed-off-by: Anand Moon <linux.amoon@gmail.com> > > --- > > New patch in the series > > --- > > drivers/clk/samsung/clk-exynos5420.c | 45 +++++++++++++++++++++------- > > 1 file changed, 34 insertions(+), 11 deletions(-) > > > > diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c > > index c9e5a1fb6653..6c4c47dfcdce 100644 > > --- a/drivers/clk/samsung/clk-exynos5420.c > > +++ b/drivers/clk/samsung/clk-exynos5420.c > > @@ -859,12 +859,6 @@ static const struct samsung_div_clock exynos5x_div_clks[] __initconst = { > > DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4), > > DIV(0, "dout_maupcm0", "dout_maudio0", DIV_MAU, 24, 8), > > > > - /* USB3.0 */ > > - DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), > > - DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), > > - DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), > > - DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), > > According to clock diagram these are still in CMU TOP, not FSYS. > > > - > > /* MMC */ > > DIV(0, "dout_mmc0", "mout_mmc0", DIV_FSYS1, 0, 10), > > DIV(0, "dout_mmc1", "mout_mmc1", DIV_FSYS1, 10, 10), > > @@ -1031,8 +1025,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { > /> > > /* FSYS Block */ > > GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0), > > - GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), > > - GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), > > GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0), > > GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0), > > GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0), > > @@ -1040,9 +1032,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { > > GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0), > > GATE(CLK_SROMC, "sromc", "aclk200_fsys2", > > GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0), > > - GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), > > - GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), > > - GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), > > GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro", > > SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), > > > > @@ -1258,6 +1247,28 @@ static struct exynos5_subcmu_reg_dump exynos5x_gsc_suspend_regs[] = { > > { DIV2_RATIO0, 0, 0x30 }, /* DIV dout_gscl_blk_300 */ > > }; > > > > +/* USB3.0 */ > > +static const struct samsung_div_clock exynos5x_fsys_div_clks[] __initconst = { > > + DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), > > + DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), > > + DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), > > + DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), > > +}; > > + > > +static const struct samsung_gate_clock exynos5x_fsys_gate_clks[] __initconst = { > > + GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), > > + GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), > > + GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), > > + GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), > > + GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), > > +}; > > + > > +static struct exynos5_subcmu_reg_dump exynos5x_fsys_suspend_regs[] = { > > + { GATE_IP_FSYS, 0xffffffff, 0xffffffff }, /* FSYS gates */ > > This looks wrong. GATE_IP_FSYS has fields also for FSYS2 clocks which > you are not suspending. They do not belong to this CMU. > Ok. I change the from GATE_IP_FSYS to GATE_BUS_FSYS0 in the above exynos5x_fsys_gate_clks to make this consistent to used GATE_BUS_FSYS0 for CMU, with this change it works as per previously. > Don't you need to save also parts of GATE_BUS_FSYS0? GATE_BUS_FSYS0 and GATE_IP_FSYS are already part of list of control register which are saved and restored during suspend and resume so no point in adding this here, I should drop the GATE_IP_FSYS reg dump over here. > > > + { SRC_TOP3, 0, BIT(24) }, /* SW_MUX_PCLK_200_FSYS_SEL */ > > + { SRC_TOP3, 0, BIT(28) }, /* SW_MUX_ACLK_200_FSYS_SEL */ > > Name of clocks from the driver please, not from datasheet. Look at other > examples. > Ok I will update this as per the examples. > Best regards, > Krzysztof > > -Anand > > +}; > > + > > static const struct samsung_gate_clock exynos5x_g3d_gate_clks[] __initconst = { > > GATE(CLK_G3D, "g3d", "mout_user_aclk_g3d", GATE_IP_G3D, 9, > > CLK_SET_RATE_PARENT, 0), > > @@ -1376,12 +1387,23 @@ static const struct exynos5_subcmu_info exynos5800_mau_subcmu = { > > .pd_name = "MAU", > > }; > > > > +static const struct exynos5_subcmu_info exynos5x_fsys_subcmu = { > > + .div_clks = exynos5x_fsys_div_clks, > > + .nr_div_clks = ARRAY_SIZE(exynos5x_fsys_div_clks), > > + .gate_clks = exynos5x_fsys_gate_clks, > > + .nr_gate_clks = ARRAY_SIZE(exynos5x_fsys_gate_clks), > > + .suspend_regs = exynos5x_fsys_suspend_regs, > > + .nr_suspend_regs = ARRAY_SIZE(exynos5x_fsys_suspend_regs), > > + .pd_name = "FSYS", > > +}; > > + > > static const struct exynos5_subcmu_info *exynos5x_subcmus[] = { > > &exynos5x_disp_subcmu, > > &exynos5x_gsc_subcmu, > > &exynos5x_g3d_subcmu, > > &exynos5x_mfc_subcmu, > > &exynos5x_mscl_subcmu, > > + &exynos5x_fsys_subcmu, > > }; > > > > static const struct exynos5_subcmu_info *exynos5800_subcmus[] = { > > @@ -1391,6 +1413,7 @@ static const struct exynos5_subcmu_info *exynos5800_subcmus[] = { > > &exynos5x_mfc_subcmu, > > &exynos5x_mscl_subcmu, > > &exynos5800_mau_subcmu, > > + &exynos5x_fsys_subcmu, > > }; > > > > static const struct samsung_pll_rate_table exynos5420_pll2550x_24mhz_tbl[] __initconst = { > > -- > > 2.25.1 > >
On Thu, Mar 12, 2020 at 04:04:57PM +0530, Anand Moon wrote: > Hi Krzysztof, > > Thanks for your review comments. > > On Wed, 11 Mar 2020 at 20:12, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > > > On Tue, Mar 10, 2020 at 07:48:54PM +0000, Anand Moon wrote: > > > FSYS power domain support usbdrd3, pdma and usb2 power gaiting, > > > hence move FSYS clk setting to sub-CMU block to support power domain > > > on/off sequences for device nodes. > > > > > > Signed-off-by: Anand Moon <linux.amoon@gmail.com> > > > --- > > > New patch in the series > > > --- > > > drivers/clk/samsung/clk-exynos5420.c | 45 +++++++++++++++++++++------- > > > 1 file changed, 34 insertions(+), 11 deletions(-) > > > > > > diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c > > > index c9e5a1fb6653..6c4c47dfcdce 100644 > > > --- a/drivers/clk/samsung/clk-exynos5420.c > > > +++ b/drivers/clk/samsung/clk-exynos5420.c > > > @@ -859,12 +859,6 @@ static const struct samsung_div_clock exynos5x_div_clks[] __initconst = { > > > DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4), > > > DIV(0, "dout_maupcm0", "dout_maudio0", DIV_MAU, 24, 8), > > > > > > - /* USB3.0 */ > > > - DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), > > > - DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), > > > - DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), > > > - DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), > > > > According to clock diagram these are still in CMU TOP, not FSYS. > > > > > - > > > /* MMC */ > > > DIV(0, "dout_mmc0", "mout_mmc0", DIV_FSYS1, 0, 10), > > > DIV(0, "dout_mmc1", "mout_mmc1", DIV_FSYS1, 10, 10), > > > @@ -1031,8 +1025,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { > > /> > > > /* FSYS Block */ > > > GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0), > > > - GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), > > > - GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), > > > GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0), > > > GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0), > > > GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0), > > > @@ -1040,9 +1032,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { > > > GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0), > > > GATE(CLK_SROMC, "sromc", "aclk200_fsys2", > > > GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0), > > > - GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), > > > - GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), > > > - GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), > > > GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro", > > > SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), > > > > > > @@ -1258,6 +1247,28 @@ static struct exynos5_subcmu_reg_dump exynos5x_gsc_suspend_regs[] = { > > > { DIV2_RATIO0, 0, 0x30 }, /* DIV dout_gscl_blk_300 */ > > > }; > > > > > > +/* USB3.0 */ > > > +static const struct samsung_div_clock exynos5x_fsys_div_clks[] __initconst = { > > > + DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), > > > + DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), > > > + DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), > > > + DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), > > > +}; > > > + > > > +static const struct samsung_gate_clock exynos5x_fsys_gate_clks[] __initconst = { > > > + GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), > > > + GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), > > > + GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), > > > + GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), > > > + GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), > > > +}; > > > + > > > +static struct exynos5_subcmu_reg_dump exynos5x_fsys_suspend_regs[] = { > > > + { GATE_IP_FSYS, 0xffffffff, 0xffffffff }, /* FSYS gates */ > > > > This looks wrong. GATE_IP_FSYS has fields also for FSYS2 clocks which > > you are not suspending. They do not belong to this CMU. > > > > Ok. I change the from GATE_IP_FSYS to GATE_BUS_FSYS0 in the above > exynos5x_fsys_gate_clks to make this consistent to used GATE_BUS_FSYS0 for CMU, > with this change it works as per previously. Wait, you should set here proper registers with proper mask. > > > Don't you need to save also parts of GATE_BUS_FSYS0? > > GATE_BUS_FSYS0 and GATE_IP_FSYS are already part of list > of control register which are saved and restored during suspend and resume > so no point in adding this here, I should drop the GATE_IP_FSYS reg > dump over here. Since registers are used in separate sub CMU devices, each should save/restore its part. Best regards, Krzysztof
Hi Krzysztof, On Thu, 12 Mar 2020 at 17:06, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > On Thu, Mar 12, 2020 at 04:04:57PM +0530, Anand Moon wrote: > > Hi Krzysztof, > > > > Thanks for your review comments. > > > > On Wed, 11 Mar 2020 at 20:12, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > > > > > On Tue, Mar 10, 2020 at 07:48:54PM +0000, Anand Moon wrote: > > > > FSYS power domain support usbdrd3, pdma and usb2 power gaiting, > > > > hence move FSYS clk setting to sub-CMU block to support power domain > > > > on/off sequences for device nodes. > > > > > > > > Signed-off-by: Anand Moon <linux.amoon@gmail.com> > > > > --- > > > > New patch in the series > > > > --- > > > > drivers/clk/samsung/clk-exynos5420.c | 45 +++++++++++++++++++++------- > > > > 1 file changed, 34 insertions(+), 11 deletions(-) > > > > > > > > diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c > > > > index c9e5a1fb6653..6c4c47dfcdce 100644 > > > > --- a/drivers/clk/samsung/clk-exynos5420.c > > > > +++ b/drivers/clk/samsung/clk-exynos5420.c > > > > @@ -859,12 +859,6 @@ static const struct samsung_div_clock exynos5x_div_clks[] __initconst = { > > > > DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4), > > > > DIV(0, "dout_maupcm0", "dout_maudio0", DIV_MAU, 24, 8), > > > > > > > > - /* USB3.0 */ > > > > - DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), > > > > - DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), > > > > - DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), > > > > - DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), > > > > > > According to clock diagram these are still in CMU TOP, not FSYS. > > > > > > > - > > > > /* MMC */ > > > > DIV(0, "dout_mmc0", "mout_mmc0", DIV_FSYS1, 0, 10), > > > > DIV(0, "dout_mmc1", "mout_mmc1", DIV_FSYS1, 10, 10), > > > > @@ -1031,8 +1025,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { > > > /> > > > > /* FSYS Block */ > > > > GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0), > > > > - GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), > > > > - GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), > > > > GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0), > > > > GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0), > > > > GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0), > > > > @@ -1040,9 +1032,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { > > > > GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0), > > > > GATE(CLK_SROMC, "sromc", "aclk200_fsys2", > > > > GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0), > > > > - GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), > > > > - GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), > > > > - GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), > > > > GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro", > > > > SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), > > > > > > > > @@ -1258,6 +1247,28 @@ static struct exynos5_subcmu_reg_dump exynos5x_gsc_suspend_regs[] = { > > > > { DIV2_RATIO0, 0, 0x30 }, /* DIV dout_gscl_blk_300 */ > > > > }; > > > > > > > > +/* USB3.0 */ > > > > +static const struct samsung_div_clock exynos5x_fsys_div_clks[] __initconst = { > > > > + DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), > > > > + DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), > > > > + DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), > > > > + DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), > > > > +}; > > > > + > > > > +static const struct samsung_gate_clock exynos5x_fsys_gate_clks[] __initconst = { > > > > + GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), > > > > + GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), > > > > + GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), > > > > + GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), > > > > + GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), > > > > +}; > > > > + > > > > +static struct exynos5_subcmu_reg_dump exynos5x_fsys_suspend_regs[] = { > > > > + { GATE_IP_FSYS, 0xffffffff, 0xffffffff }, /* FSYS gates */ > > > > > > This looks wrong. GATE_IP_FSYS has fields also for FSYS2 clocks which > > > you are not suspending. They do not belong to this CMU. > > > > > > > Ok. I change the from GATE_IP_FSYS to GATE_BUS_FSYS0 in the above > > exynos5x_fsys_gate_clks to make this consistent to used GATE_BUS_FSYS0 for CMU, > > with this change it works as per previously. > > Wait, you should set here proper registers with proper mask. Yes I will set the proper mask for each as per the Exynos 5422 User Manual. Here is what I feel CLK_GATE_BUS_FSYS0 controls the PHY clock CLK_GATE_IP_FSYS controls the IP clock. So both these field should be part of this FSYS CMU. > > > > > Don't you need to save also parts of GATE_BUS_FSYS0? > > > > GATE_BUS_FSYS0 and GATE_IP_FSYS are already part of list > > of control register which are saved and restored during suspend and resume > > so no point in adding this here, I should drop the GATE_IP_FSYS reg > > dump over here. > > Since registers are used in separate sub CMU devices, each should > save/restore its part. Ok I will add both GATE_BUS_FSYS0 and GATE_IP_FSYS reset value over here. > > Best regards, > Krzysztof > -Anand
Hi Krzysztof, On Thu, 12 Mar 2020 at 18:24, Anand Moon <linux.amoon@gmail.com> wrote: > > Hi Krzysztof, > > On Thu, 12 Mar 2020 at 17:06, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > > > On Thu, Mar 12, 2020 at 04:04:57PM +0530, Anand Moon wrote: > > > Hi Krzysztof, > > > > > > Thanks for your review comments. > > > > > > On Wed, 11 Mar 2020 at 20:12, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > > > > > > > On Tue, Mar 10, 2020 at 07:48:54PM +0000, Anand Moon wrote: > > > > > FSYS power domain support usbdrd3, pdma and usb2 power gaiting, > > > > > hence move FSYS clk setting to sub-CMU block to support power domain > > > > > on/off sequences for device nodes. > > > > > > > > > > Signed-off-by: Anand Moon <linux.amoon@gmail.com> > > > > > --- > > > > > New patch in the series > > > > > --- > > > > > drivers/clk/samsung/clk-exynos5420.c | 45 +++++++++++++++++++++------- > > > > > 1 file changed, 34 insertions(+), 11 deletions(-) > > > > > > > > > > diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c > > > > > index c9e5a1fb6653..6c4c47dfcdce 100644 > > > > > --- a/drivers/clk/samsung/clk-exynos5420.c > > > > > +++ b/drivers/clk/samsung/clk-exynos5420.c > > > > > @@ -859,12 +859,6 @@ static const struct samsung_div_clock exynos5x_div_clks[] __initconst = { > > > > > DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4), > > > > > DIV(0, "dout_maupcm0", "dout_maudio0", DIV_MAU, 24, 8), > > > > > > > > > > - /* USB3.0 */ > > > > > - DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), > > > > > - DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), > > > > > - DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), > > > > > - DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), > > > > > > > > According to clock diagram these are still in CMU TOP, not FSYS. > > > > > > > > > - > > > > > /* MMC */ > > > > > DIV(0, "dout_mmc0", "mout_mmc0", DIV_FSYS1, 0, 10), > > > > > DIV(0, "dout_mmc1", "mout_mmc1", DIV_FSYS1, 10, 10), > > > > > @@ -1031,8 +1025,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { > > > > /> > > > > > /* FSYS Block */ > > > > > GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0), > > > > > - GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), > > > > > - GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), > > > > > GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0), > > > > > GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0), > > > > > GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0), > > > > > @@ -1040,9 +1032,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { > > > > > GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0), > > > > > GATE(CLK_SROMC, "sromc", "aclk200_fsys2", > > > > > GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0), > > > > > - GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), > > > > > - GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), > > > > > - GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), > > > > > GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro", > > > > > SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), > > > > > > > > > > @@ -1258,6 +1247,28 @@ static struct exynos5_subcmu_reg_dump exynos5x_gsc_suspend_regs[] = { > > > > > { DIV2_RATIO0, 0, 0x30 }, /* DIV dout_gscl_blk_300 */ > > > > > }; > > > > > > > > > > +/* USB3.0 */ > > > > > +static const struct samsung_div_clock exynos5x_fsys_div_clks[] __initconst = { > > > > > + DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), > > > > > + DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), > > > > > + DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), > > > > > + DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), > > > > > +}; > > > > > + > > > > > +static const struct samsung_gate_clock exynos5x_fsys_gate_clks[] __initconst = { > > > > > + GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), > > > > > + GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), > > > > > + GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), > > > > > + GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), > > > > > + GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), > > > > > +}; > > > > > + > > > > > +static struct exynos5_subcmu_reg_dump exynos5x_fsys_suspend_regs[] = { > > > > > + { GATE_IP_FSYS, 0xffffffff, 0xffffffff }, /* FSYS gates */ > > > > > > > > This looks wrong. GATE_IP_FSYS has fields also for FSYS2 clocks which > > > > you are not suspending. They do not belong to this CMU. > > > > > > > > > > Ok. I change the from GATE_IP_FSYS to GATE_BUS_FSYS0 in the above > > > exynos5x_fsys_gate_clks to make this consistent to used GATE_BUS_FSYS0 for CMU, > > > with this change it works as per previously. > > > > Wait, you should set here proper registers with proper mask. > > Yes I will set the proper mask for each as per the Exynos 5422 User Manual. > > Here is what I feel > CLK_GATE_BUS_FSYS0 controls the PHY clock > CLK_GATE_IP_FSYS controls the IP clock. > Sorry I cannot register both CLK_GATE_BUS_FSYS0 and CLK_GATE_IP_FSYS to aclk200_fsys, so I got some error like below. [ 0.922693] samsung_clk_register_gate: failed to register clock usbh20 [ 0.922857] samsung_clk_register_gate: failed to register clock usbd300 [ 0.923000] samsung_clk_register_gate: failed to register clock usbd301 > So both these field should be part of this FSYS CMU. > > > > > > > > Don't you need to save also parts of GATE_BUS_FSYS0? > > > > > > GATE_BUS_FSYS0 and GATE_IP_FSYS are already part of list > > > of control register which are saved and restored during suspend and resume > > > so no point in adding this here, I should drop the GATE_IP_FSYS reg > > > dump over here. > > > > Since registers are used in separate sub CMU devices, each should > > save/restore its part. > > Ok I will add both GATE_BUS_FSYS0 and GATE_IP_FSYS > reset value over here. > So only changes to this patch is to set the above correctly. -Anand
On Thu, Mar 12, 2020 at 07:38:30PM +0530, Anand Moon wrote: > Hi Krzysztof, > > On Thu, 12 Mar 2020 at 18:24, Anand Moon <linux.amoon@gmail.com> wrote: > > > > Hi Krzysztof, > > > > On Thu, 12 Mar 2020 at 17:06, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > > > > > On Thu, Mar 12, 2020 at 04:04:57PM +0530, Anand Moon wrote: > > > > Hi Krzysztof, > > > > > > > > Thanks for your review comments. > > > > > > > > On Wed, 11 Mar 2020 at 20:12, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > > > > > > > > > On Tue, Mar 10, 2020 at 07:48:54PM +0000, Anand Moon wrote: > > > > > > FSYS power domain support usbdrd3, pdma and usb2 power gaiting, > > > > > > hence move FSYS clk setting to sub-CMU block to support power domain > > > > > > on/off sequences for device nodes. > > > > > > > > > > > > Signed-off-by: Anand Moon <linux.amoon@gmail.com> > > > > > > --- > > > > > > New patch in the series > > > > > > --- > > > > > > drivers/clk/samsung/clk-exynos5420.c | 45 +++++++++++++++++++++------- > > > > > > 1 file changed, 34 insertions(+), 11 deletions(-) > > > > > > > > > > > > diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c > > > > > > index c9e5a1fb6653..6c4c47dfcdce 100644 > > > > > > --- a/drivers/clk/samsung/clk-exynos5420.c > > > > > > +++ b/drivers/clk/samsung/clk-exynos5420.c > > > > > > @@ -859,12 +859,6 @@ static const struct samsung_div_clock exynos5x_div_clks[] __initconst = { > > > > > > DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4), > > > > > > DIV(0, "dout_maupcm0", "dout_maudio0", DIV_MAU, 24, 8), > > > > > > > > > > > > - /* USB3.0 */ > > > > > > - DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), > > > > > > - DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), > > > > > > - DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), > > > > > > - DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), > > > > > > > > > > According to clock diagram these are still in CMU TOP, not FSYS. > > > > > > > > > > > - > > > > > > /* MMC */ > > > > > > DIV(0, "dout_mmc0", "mout_mmc0", DIV_FSYS1, 0, 10), > > > > > > DIV(0, "dout_mmc1", "mout_mmc1", DIV_FSYS1, 10, 10), > > > > > > @@ -1031,8 +1025,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { > > > > > /> > > > > > > /* FSYS Block */ > > > > > > GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0), > > > > > > - GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), > > > > > > - GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), > > > > > > GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0), > > > > > > GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0), > > > > > > GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0), > > > > > > @@ -1040,9 +1032,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { > > > > > > GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0), > > > > > > GATE(CLK_SROMC, "sromc", "aclk200_fsys2", > > > > > > GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0), > > > > > > - GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), > > > > > > - GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), > > > > > > - GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), > > > > > > GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro", > > > > > > SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), > > > > > > > > > > > > @@ -1258,6 +1247,28 @@ static struct exynos5_subcmu_reg_dump exynos5x_gsc_suspend_regs[] = { > > > > > > { DIV2_RATIO0, 0, 0x30 }, /* DIV dout_gscl_blk_300 */ > > > > > > }; > > > > > > > > > > > > +/* USB3.0 */ > > > > > > +static const struct samsung_div_clock exynos5x_fsys_div_clks[] __initconst = { > > > > > > + DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), > > > > > > + DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), > > > > > > + DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), > > > > > > + DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), > > > > > > +}; > > > > > > + > > > > > > +static const struct samsung_gate_clock exynos5x_fsys_gate_clks[] __initconst = { > > > > > > + GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), > > > > > > + GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), > > > > > > + GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), > > > > > > + GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), > > > > > > + GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), > > > > > > +}; > > > > > > + > > > > > > +static struct exynos5_subcmu_reg_dump exynos5x_fsys_suspend_regs[] = { > > > > > > + { GATE_IP_FSYS, 0xffffffff, 0xffffffff }, /* FSYS gates */ > > > > > > > > > > This looks wrong. GATE_IP_FSYS has fields also for FSYS2 clocks which > > > > > you are not suspending. They do not belong to this CMU. > > > > > > > > > > > > > Ok. I change the from GATE_IP_FSYS to GATE_BUS_FSYS0 in the above > > > > exynos5x_fsys_gate_clks to make this consistent to used GATE_BUS_FSYS0 for CMU, > > > > with this change it works as per previously. > > > > > > Wait, you should set here proper registers with proper mask. > > > > Yes I will set the proper mask for each as per the Exynos 5422 User Manual. > > > > Here is what I feel > > CLK_GATE_BUS_FSYS0 controls the PHY clock > > CLK_GATE_IP_FSYS controls the IP clock. > > > > Sorry I cannot register both CLK_GATE_BUS_FSYS0 and CLK_GATE_IP_FSYS > to aclk200_fsys, so I got some error like below. > > [ 0.922693] samsung_clk_register_gate: failed to register clock usbh20 > [ 0.922857] samsung_clk_register_gate: failed to register clock usbd300 > [ 0.923000] samsung_clk_register_gate: failed to register clock usbd301 > > > So both these field should be part of this FSYS CMU. I am not sure if I understand your problem. I mentioned that you need to put proper registers with proper masks into the exynos5_subcmu_reg_dump. I don't know what have you changed to produce such error logs. Best regards, Krzysztof
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index c9e5a1fb6653..6c4c47dfcdce 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -859,12 +859,6 @@ static const struct samsung_div_clock exynos5x_div_clks[] __initconst = { DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4), DIV(0, "dout_maupcm0", "dout_maudio0", DIV_MAU, 24, 8), - /* USB3.0 */ - DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), - DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), - DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), - DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), - /* MMC */ DIV(0, "dout_mmc0", "mout_mmc0", DIV_FSYS1, 0, 10), DIV(0, "dout_mmc1", "mout_mmc1", DIV_FSYS1, 10, 10), @@ -1031,8 +1025,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { /* FSYS Block */ GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0), - GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), - GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0), GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0), GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0), @@ -1040,9 +1032,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0), GATE(CLK_SROMC, "sromc", "aclk200_fsys2", GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0), - GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), - GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), - GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro", SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), @@ -1258,6 +1247,28 @@ static struct exynos5_subcmu_reg_dump exynos5x_gsc_suspend_regs[] = { { DIV2_RATIO0, 0, 0x30 }, /* DIV dout_gscl_blk_300 */ }; +/* USB3.0 */ +static const struct samsung_div_clock exynos5x_fsys_div_clks[] __initconst = { + DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4), + DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4), + DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4), + DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4), +}; + +static const struct samsung_gate_clock exynos5x_fsys_gate_clks[] __initconst = { + GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0), + GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0), + GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0), + GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0), + GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0), +}; + +static struct exynos5_subcmu_reg_dump exynos5x_fsys_suspend_regs[] = { + { GATE_IP_FSYS, 0xffffffff, 0xffffffff }, /* FSYS gates */ + { SRC_TOP3, 0, BIT(24) }, /* SW_MUX_PCLK_200_FSYS_SEL */ + { SRC_TOP3, 0, BIT(28) }, /* SW_MUX_ACLK_200_FSYS_SEL */ +}; + static const struct samsung_gate_clock exynos5x_g3d_gate_clks[] __initconst = { GATE(CLK_G3D, "g3d", "mout_user_aclk_g3d", GATE_IP_G3D, 9, CLK_SET_RATE_PARENT, 0), @@ -1376,12 +1387,23 @@ static const struct exynos5_subcmu_info exynos5800_mau_subcmu = { .pd_name = "MAU", }; +static const struct exynos5_subcmu_info exynos5x_fsys_subcmu = { + .div_clks = exynos5x_fsys_div_clks, + .nr_div_clks = ARRAY_SIZE(exynos5x_fsys_div_clks), + .gate_clks = exynos5x_fsys_gate_clks, + .nr_gate_clks = ARRAY_SIZE(exynos5x_fsys_gate_clks), + .suspend_regs = exynos5x_fsys_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(exynos5x_fsys_suspend_regs), + .pd_name = "FSYS", +}; + static const struct exynos5_subcmu_info *exynos5x_subcmus[] = { &exynos5x_disp_subcmu, &exynos5x_gsc_subcmu, &exynos5x_g3d_subcmu, &exynos5x_mfc_subcmu, &exynos5x_mscl_subcmu, + &exynos5x_fsys_subcmu, }; static const struct exynos5_subcmu_info *exynos5800_subcmus[] = { @@ -1391,6 +1413,7 @@ static const struct exynos5_subcmu_info *exynos5800_subcmus[] = { &exynos5x_mfc_subcmu, &exynos5x_mscl_subcmu, &exynos5800_mau_subcmu, + &exynos5x_fsys_subcmu, }; static const struct samsung_pll_rate_table exynos5420_pll2550x_24mhz_tbl[] __initconst = {
FSYS power domain support usbdrd3, pdma and usb2 power gaiting, hence move FSYS clk setting to sub-CMU block to support power domain on/off sequences for device nodes. Signed-off-by: Anand Moon <linux.amoon@gmail.com> --- New patch in the series --- drivers/clk/samsung/clk-exynos5420.c | 45 +++++++++++++++++++++------- 1 file changed, 34 insertions(+), 11 deletions(-)