diff mbox series

[v2,2/6] iio: imu: adis: Add irq mask variable

Message ID 20200316125312.39178-3-nuno.sa@analog.com (mailing list archive)
State New, archived
Headers show
Series Support ADIS16475 and similar IMUs | expand

Commit Message

Nuno Sa March 16, 2020, 12:53 p.m. UTC
There are some ADIS devices that can configure the data ready pin
polarity. Hence, we cannot hardcode our IRQ mask as IRQF_TRIGGER_RISING
since we might want to have it as IRQF_TRIGGER_FALLING.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
---
Changes in v2:
 * Add kernel doc-string for `irq-mask`.

 drivers/iio/imu/adis_trigger.c | 26 ++++++++++++++++++++++++--
 include/linux/iio/imu/adis.h   |  2 ++
 2 files changed, 26 insertions(+), 2 deletions(-)

Comments

Lars-Peter Clausen March 16, 2020, 1:31 p.m. UTC | #1
On 3/16/20 1:53 PM, Nuno Sá wrote:
> There are some ADIS devices that can configure the data ready pin
> polarity. Hence, we cannot hardcode our IRQ mask as IRQF_TRIGGER_RISING
> since we might want to have it as IRQF_TRIGGER_FALLING.
>
> Signed-off-by: Nuno Sá <nuno.sa@analog.com>
> ---
> Changes in v2:
>   * Add kernel doc-string for `irq-mask`.
>
>   drivers/iio/imu/adis_trigger.c | 26 ++++++++++++++++++++++++--
>   include/linux/iio/imu/adis.h   |  2 ++
>   2 files changed, 26 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/imu/adis_trigger.c b/drivers/iio/imu/adis_trigger.c
> index 9e393819d238..21eddffc50d3 100644
> --- a/drivers/iio/imu/adis_trigger.c
> +++ b/drivers/iio/imu/adis_trigger.c
> @@ -34,6 +34,20 @@ static inline void adis_trigger_setup(struct adis *adis)
>   	iio_trigger_set_drvdata(adis->trig, adis);
>   }
>   
> +static inline int __adis_validate_irq_mask(struct adis *adis)

Bit of a nitpick, I'd drop the __ prefix, so far we only used it if 
there is a locked and an unlocked version of a function and it is 
unlikely that we'll need an unlocked function here.

I'd also drop the inline the compiler is smart enough to figure this out 
on its own. I believe the recommendation at the moment for kernel code 
is to use inline only for functions defined in header files.

> +{
> +	if (!adis->irq_mask) {
> +		adis->irq_mask = IRQF_TRIGGER_RISING;
> +		return 0;
> +	} else if (adis->irq_mask != IRQF_TRIGGER_RISING &&
> +		   adis->irq_mask != IRQF_TRIGGER_FALLING) {
> +		dev_err(&adis->spi->dev, "Invalid IRQ mask:%08lx\n",

Another nitpick. Space behind the ":".

> +			adis->irq_mask);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
>   /**
>    * adis_probe_trigger() - Sets up trigger for a adis device
>    * @adis: The adis device
> @@ -54,9 +68,13 @@ int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
>   
>   	adis_trigger_setup(adis);
>   
> +	ret = __adis_validate_irq_mask(adis);
> +	if (ret)
> +		return ret;
> +
>   	ret = request_irq(adis->spi->irq,
>   			  &iio_trigger_generic_data_rdy_poll,
> -			  IRQF_TRIGGER_RISING,
> +			  adis->irq_mask,
>   			  indio_dev->name,
>   			  adis->trig);
>   	if (ret)
> @@ -96,9 +114,13 @@ int devm_adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
>   
>   	adis_trigger_setup(adis);
>   
> +	ret = __adis_validate_irq_mask(adis);
> +	if (ret)
> +		return ret;
> +
>   	ret = devm_request_irq(&adis->spi->dev, adis->spi->irq,
>   			       &iio_trigger_generic_data_rdy_poll,
> -			       IRQF_TRIGGER_RISING,
> +			       adis->irq_mask,
>   			       indio_dev->name,
>   			       adis->trig);
>   	if (ret)
> diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
> index ac94c483bf2b..ed41c6b96d14 100644
> --- a/include/linux/iio/imu/adis.h
> +++ b/include/linux/iio/imu/adis.h
> @@ -87,6 +87,7 @@ struct adis_data {
>    * @msg: SPI message object
>    * @xfer: SPI transfer objects to be used for a @msg
>    * @current_page: Some ADIS devices have registers, this selects current page
> + * @irq_mask: IRQ handling flags as passed to request_irq()
>    * @buffer: Data buffer for information read from the device
>    * @tx: DMA safe TX buffer for SPI transfers
>    * @rx: DMA safe RX buffer for SPI transfers
> @@ -113,6 +114,7 @@ struct adis {
>   	struct spi_message	msg;
>   	struct spi_transfer	*xfer;
>   	unsigned int		current_page;
> +	unsigned long		irq_mask;
>   	void			*buffer;
>   
>   	uint8_t			tx[10] ____cacheline_aligned;
diff mbox series

Patch

diff --git a/drivers/iio/imu/adis_trigger.c b/drivers/iio/imu/adis_trigger.c
index 9e393819d238..21eddffc50d3 100644
--- a/drivers/iio/imu/adis_trigger.c
+++ b/drivers/iio/imu/adis_trigger.c
@@ -34,6 +34,20 @@  static inline void adis_trigger_setup(struct adis *adis)
 	iio_trigger_set_drvdata(adis->trig, adis);
 }
 
+static inline int __adis_validate_irq_mask(struct adis *adis)
+{
+	if (!adis->irq_mask) {
+		adis->irq_mask = IRQF_TRIGGER_RISING;
+		return 0;
+	} else if (adis->irq_mask != IRQF_TRIGGER_RISING &&
+		   adis->irq_mask != IRQF_TRIGGER_FALLING) {
+		dev_err(&adis->spi->dev, "Invalid IRQ mask:%08lx\n",
+			adis->irq_mask);
+		return -EINVAL;
+	}
+
+	return 0;
+}
 /**
  * adis_probe_trigger() - Sets up trigger for a adis device
  * @adis: The adis device
@@ -54,9 +68,13 @@  int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
 
 	adis_trigger_setup(adis);
 
+	ret = __adis_validate_irq_mask(adis);
+	if (ret)
+		return ret;
+
 	ret = request_irq(adis->spi->irq,
 			  &iio_trigger_generic_data_rdy_poll,
-			  IRQF_TRIGGER_RISING,
+			  adis->irq_mask,
 			  indio_dev->name,
 			  adis->trig);
 	if (ret)
@@ -96,9 +114,13 @@  int devm_adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
 
 	adis_trigger_setup(adis);
 
+	ret = __adis_validate_irq_mask(adis);
+	if (ret)
+		return ret;
+
 	ret = devm_request_irq(&adis->spi->dev, adis->spi->irq,
 			       &iio_trigger_generic_data_rdy_poll,
-			       IRQF_TRIGGER_RISING,
+			       adis->irq_mask,
 			       indio_dev->name,
 			       adis->trig);
 	if (ret)
diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
index ac94c483bf2b..ed41c6b96d14 100644
--- a/include/linux/iio/imu/adis.h
+++ b/include/linux/iio/imu/adis.h
@@ -87,6 +87,7 @@  struct adis_data {
  * @msg: SPI message object
  * @xfer: SPI transfer objects to be used for a @msg
  * @current_page: Some ADIS devices have registers, this selects current page
+ * @irq_mask: IRQ handling flags as passed to request_irq()
  * @buffer: Data buffer for information read from the device
  * @tx: DMA safe TX buffer for SPI transfers
  * @rx: DMA safe RX buffer for SPI transfers
@@ -113,6 +114,7 @@  struct adis {
 	struct spi_message	msg;
 	struct spi_transfer	*xfer;
 	unsigned int		current_page;
+	unsigned long		irq_mask;
 	void			*buffer;
 
 	uint8_t			tx[10] ____cacheline_aligned;