diff mbox series

[v2,05/19] media: ti-vpe: cal: drop cal_runtime_get/put

Message ID 20200319075023.22151-6-tomi.valkeinen@ti.com (mailing list archive)
State New, archived
Headers show
Series CAL fixes and improvements | expand

Commit Message

Tomi Valkeinen March 19, 2020, 7:50 a.m. UTC
Now that cal_runtime_get and cal_runtime_put are only direct wrappers to
pm_runtime_get/put, we can drop cal_runtime_get and cal_runtime_put.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/media/platform/ti-vpe/cal.c | 24 +++++++-----------------
 1 file changed, 7 insertions(+), 17 deletions(-)

Comments

Benoit Parrot March 19, 2020, 10:29 p.m. UTC | #1
Tomi,

Thanks for the patch.

On 3/19/20 2:50 AM, Tomi Valkeinen wrote:
> Now that cal_runtime_get and cal_runtime_put are only direct wrappers to
> pm_runtime_get/put, we can drop cal_runtime_get and cal_runtime_put.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
>  drivers/media/platform/ti-vpe/cal.c | 24 +++++++-----------------
>  1 file changed, 7 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
> index 4fe37f284b54..4f9dee3474ba 100644
> --- a/drivers/media/platform/ti-vpe/cal.c
> +++ b/drivers/media/platform/ti-vpe/cal.c
> @@ -651,16 +651,6 @@ static void i913_errata(struct cal_dev *dev, unsigned int port)
>  	reg_write(dev->cc[port], CAL_CSI2_PHY_REG10, reg10);
>  }
>  
> -static int cal_runtime_get(struct cal_dev *dev)
> -{
> -	return pm_runtime_get_sync(&dev->pdev->dev);
> -}
> -
> -static inline void cal_runtime_put(struct cal_dev *dev)
> -{
> -	pm_runtime_put_sync(&dev->pdev->dev);
> -}
> -
>  static void cal_quickdump_regs(struct cal_dev *dev)
>  {
>  	cal_info(dev, "CAL Registers @ 0x%pa:\n", &dev->res->start);
> @@ -1666,7 +1656,7 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
>  		goto err;
>  	}
>  
> -	cal_runtime_get(ctx->dev);
> +	pm_runtime_get_sync(&ctx->dev->pdev->dev);
>  
>  	csi2_ctx_config(ctx);
>  	pix_proc_config(ctx);
> @@ -1681,7 +1671,7 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
>  	if (ret) {
>  		v4l2_subdev_call(ctx->sensor, core, s_power, 0);
>  		ctx_err(ctx, "stream on failed in subdev\n");
> -		cal_runtime_put(ctx->dev);
> +		pm_runtime_put_sync(&ctx->dev->pdev->dev);
>  		goto err;
>  	}
>  
> @@ -1761,7 +1751,7 @@ static void cal_stop_streaming(struct vb2_queue *vq)
>  	ctx->next_frm = NULL;
>  	spin_unlock_irqrestore(&ctx->slock, flags);
>  
> -	cal_runtime_put(ctx->dev);
> +	pm_runtime_put_sync(&ctx->dev->pdev->dev);
>  }
>  
>  static const struct vb2_ops cal_video_qops = {
> @@ -2316,14 +2306,14 @@ static int cal_probe(struct platform_device *pdev)
>  
>  	pm_runtime_enable(&pdev->dev);
>  
> -	ret = cal_runtime_get(dev);
> +	ret = pm_runtime_get_sync(&pdev->dev);
>  	if (ret)
>  		goto runtime_disable;
>  
>  	/* Just check we can actually access the module */
>  	cal_get_hwinfo(dev);
>  
> -	cal_runtime_put(dev);
> +	pm_runtime_put_sync(&pdev->dev);
>  
>  	return 0;
>  
> @@ -2351,7 +2341,7 @@ static int cal_remove(struct platform_device *pdev)
>  
>  	cal_dbg(1, dev, "Removing %s\n", CAL_MODULE_NAME);
>  
> -	cal_runtime_get(dev);
> +	pm_runtime_get_sync(&pdev->dev);
>  
>  	for (i = 0; i < CAL_NUM_CONTEXT; i++) {
>  		ctx = dev->ctx[i];
> @@ -2367,7 +2357,7 @@ static int cal_remove(struct platform_device *pdev)
>  		}
>  	}
>  
> -	cal_runtime_put(dev);
> +	pm_runtime_put_sync(&pdev->dev);
>  	pm_runtime_disable(&pdev->dev);
>  
>  	return 0;
> 

Reviewed-by: Benoit Parrot <bparrot@ti.com>
diff mbox series

Patch

diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 4fe37f284b54..4f9dee3474ba 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -651,16 +651,6 @@  static void i913_errata(struct cal_dev *dev, unsigned int port)
 	reg_write(dev->cc[port], CAL_CSI2_PHY_REG10, reg10);
 }
 
-static int cal_runtime_get(struct cal_dev *dev)
-{
-	return pm_runtime_get_sync(&dev->pdev->dev);
-}
-
-static inline void cal_runtime_put(struct cal_dev *dev)
-{
-	pm_runtime_put_sync(&dev->pdev->dev);
-}
-
 static void cal_quickdump_regs(struct cal_dev *dev)
 {
 	cal_info(dev, "CAL Registers @ 0x%pa:\n", &dev->res->start);
@@ -1666,7 +1656,7 @@  static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
 		goto err;
 	}
 
-	cal_runtime_get(ctx->dev);
+	pm_runtime_get_sync(&ctx->dev->pdev->dev);
 
 	csi2_ctx_config(ctx);
 	pix_proc_config(ctx);
@@ -1681,7 +1671,7 @@  static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
 	if (ret) {
 		v4l2_subdev_call(ctx->sensor, core, s_power, 0);
 		ctx_err(ctx, "stream on failed in subdev\n");
-		cal_runtime_put(ctx->dev);
+		pm_runtime_put_sync(&ctx->dev->pdev->dev);
 		goto err;
 	}
 
@@ -1761,7 +1751,7 @@  static void cal_stop_streaming(struct vb2_queue *vq)
 	ctx->next_frm = NULL;
 	spin_unlock_irqrestore(&ctx->slock, flags);
 
-	cal_runtime_put(ctx->dev);
+	pm_runtime_put_sync(&ctx->dev->pdev->dev);
 }
 
 static const struct vb2_ops cal_video_qops = {
@@ -2316,14 +2306,14 @@  static int cal_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(&pdev->dev);
 
-	ret = cal_runtime_get(dev);
+	ret = pm_runtime_get_sync(&pdev->dev);
 	if (ret)
 		goto runtime_disable;
 
 	/* Just check we can actually access the module */
 	cal_get_hwinfo(dev);
 
-	cal_runtime_put(dev);
+	pm_runtime_put_sync(&pdev->dev);
 
 	return 0;
 
@@ -2351,7 +2341,7 @@  static int cal_remove(struct platform_device *pdev)
 
 	cal_dbg(1, dev, "Removing %s\n", CAL_MODULE_NAME);
 
-	cal_runtime_get(dev);
+	pm_runtime_get_sync(&pdev->dev);
 
 	for (i = 0; i < CAL_NUM_CONTEXT; i++) {
 		ctx = dev->ctx[i];
@@ -2367,7 +2357,7 @@  static int cal_remove(struct platform_device *pdev)
 		}
 	}
 
-	cal_runtime_put(dev);
+	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	return 0;