@@ -48,7 +48,7 @@ vwlan_fixed: fixedregulator2 {
backlight {
compatible = "pwm-backlight";
- pwms = <&ecap0 0 50000 0>;
+ pwms = <&ecap0 0 50000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
@@ -115,7 +115,7 @@ switch10 {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&ecap0 0 50000 0>;
+ pwms = <&ecap0 0 50000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
@@ -144,7 +144,7 @@ bl: backlight {
pinctrl-names = "default";
power-supply = <&vdd_io_reg>;
pinctrl-0 = <&backlight_pins>;
- pwms = <&pwm11 0 5000000 0>;
+ pwms = <&pwm11 0 5000000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <7>;
enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
@@ -10,7 +10,7 @@
/ {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&hlcdc_pwm 0 50000 0>;
+ pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
@@ -63,21 +63,21 @@ pwm_leds {
blue {
label = "pwm:blue:user";
- pwms = <&pwm0 2 10000000 0>;
+ pwms = <&pwm0 2 10000000 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
linux,default-trigger = "none";
};
green {
label = "pwm:green:user";
- pwms = <&pwm0 1 10000000 0>;
+ pwms = <&pwm0 1 10000000 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
red {
label = "pwm:red:user";
- pwms = <&pwm0 0 10000000 0>;
+ pwms = <&pwm0 0 10000000 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
@@ -73,7 +73,7 @@ &pinctrl_pwm0_pwm_h2
red {
label = "pwm:red:user";
- pwms = <&pwm0 0 10000000 0>;
+ pwms = <&pwm0 0 10000000 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
linux,default-trigger = "default-on";
status = "disabled";
@@ -81,7 +81,7 @@ red {
green {
label = "pwm:green:user";
- pwms = <&pwm0 1 10000000 0>;
+ pwms = <&pwm0 1 10000000 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
linux,default-trigger = "default-on";
status = "disabled";
@@ -89,14 +89,14 @@ green {
blue {
label = "pwm:blue:user";
- pwms = <&pwm0 2 10000000 0>;
+ pwms = <&pwm0 2 10000000 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
status = "disabled";
};
white {
label = "pwm:white:user";
- pwms = <&pwm0 3 10000000 0>;
+ pwms = <&pwm0 3 10000000 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
status = "disabled";
};
@@ -59,7 +59,7 @@ leds: pwm_leds {
led_blue: pwm_blue {
label = "pwm:blue:user";
- pwms = <&pwm0 2 10000000 0>;
+ pwms = <&pwm0 2 10000000 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
linux,default-trigger = "none";
status = "disabled";
@@ -67,14 +67,14 @@ led_blue: pwm_blue {
led_green: pwm_green {
label = "pwm:green:user";
- pwms = <&pwm0 0 10000000 0>;
+ pwms = <&pwm0 0 10000000 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
led_red: pwm_red {
label = "pwm:red:user";
- pwms = <&pwm0 1 10000000 0>;
+ pwms = <&pwm0 1 10000000 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
@@ -42,7 +42,7 @@ bl_reg: backlight-regulator {
panel_bl: backlight {
compatible = "pwm-backlight";
- pwms = <&hlcdc_pwm 0 100000 0>;
+ pwms = <&hlcdc_pwm 0 100000 PWM_POLARITY_NORMAL>;
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
@@ -105,7 +105,7 @@ pinctrl_usba_vbus: usba_vbus {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&hlcdc_pwm 0 50000 0>;
+ pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
@@ -189,7 +189,7 @@ usb0: ohci@500000 {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&hlcdc_pwm 0 50000 0>;
+ pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&bl_reg>;
@@ -11,7 +11,7 @@
/ {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&hlcdc_pwm 0 50000 0>;
+ pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&bl_reg>;
@@ -41,14 +41,14 @@ leds {
white {
label = "white";
- pwms = <&pwm 0 600000 0>;
+ pwms = <&pwm 0 600000 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
red {
label = "red";
- pwms = <&pwm 1 600000 0>;
+ pwms = <&pwm 1 600000 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
};
};
@@ -34,7 +34,7 @@ backlight: backlight-pwm {
* schematic needs to be 1015171 (15 March 2010), Rev A
* or newer.
*/
- pwms = <&ecap2 0 50000 0>;
+ pwms = <&ecap2 0 50000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
default-brightness-level = <7>;
};
@@ -118,7 +118,7 @@ sound {
compatible = "pwm-beeper";
pinctrl-names = "default";
pinctrl-0 = <&ehrpwm0b_pins>;
- pwms = <&ehrpwm0 1 1000000 0>;
+ pwms = <&ehrpwm0 1 1000000 PWM_POLARITY_NORMAL>;
amp-supply = <&>;
};
@@ -185,7 +185,7 @@ bt_slow_clk: bt-clock {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&ecap2 0 30518 0>;
+ pwms = <&ecap2 0 30518 PWM_POLARITY_NORMAL>;
};
/* ARM local RAM */
@@ -171,7 +171,7 @@ charger_reg: CHARGER {
max77693_haptic {
compatible = "maxim,max77693-haptic";
haptic-supply = <&ldo26_reg>;
- pwms = <&pwm 0 38022 0>;
+ pwms = <&pwm 0 38022 PWM_POLARITY_NORMAL>;
};
charger {
@@ -33,7 +33,7 @@ led1 {
fan0: pwm-fan {
compatible = "pwm-fan";
- pwms = <&pwm 0 10000 0>;
+ pwms = <&pwm 0 10000 PWM_POLARITY_NORMAL>;
#cooling-cells = <2>;
cooling-levels = <0 102 170 230>;
};
@@ -196,7 +196,7 @@ xxti {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 1000000 0>;
+ pwms = <&pwm 0 1000000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
@@ -37,7 +37,7 @@ emmc_pwrseq: pwrseq {
fan0: pwm-fan {
compatible = "pwm-fan";
- pwms = <&pwm 0 20972 0>;
+ pwms = <&pwm 0 20972 PWM_POLARITY_NORMAL>;
#cooling-cells = <2>;
cooling-levels = <0 130 170 230>;
};
@@ -34,7 +34,7 @@ aliases {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 1000000 0>;
+ pwms = <&pwm 0 1000000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
power-supply = <&tps65090_fet1>;
@@ -20,7 +20,7 @@ pwmleds {
blueled {
label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
+ pwms = <&pwm 2 2000000 PWM_POLARITY_NORMAL>;
pwm-names = "pwm2";
max_brightness = <255>;
linux,default-trigger = "heartbeat";
@@ -43,7 +43,7 @@ emmc_pwrseq: pwrseq {
fan0: pwm-fan {
compatible = "pwm-fan";
- pwms = <&pwm 0 20972 0>;
+ pwms = <&pwm 0 20972 PWM_POLARITY_NORMAL>;
#cooling-cells = <2>;
cooling-levels = <0 130 170 230>;
};
@@ -22,7 +22,7 @@ pwmleds {
blueled {
label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
+ pwms = <&pwm 2 2000000 PWM_POLARITY_NORMAL>;
pwm-names = "pwm2";
max_brightness = <255>;
linux,default-trigger = "heartbeat";
@@ -16,7 +16,7 @@ pwmleds {
greenled {
label = "green:mmc0";
- pwms = <&pwm 1 2000000 0>;
+ pwms = <&pwm 1 2000000 PWM_POLARITY_NORMAL>;
pwm-names = "pwm1";
/*
* Green LED is much brighter than the others
@@ -28,7 +28,7 @@ greenled {
blueled {
label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
+ pwms = <&pwm 2 2000000 PWM_POLARITY_NORMAL>;
pwm-names = "pwm2";
max_brightness = <255>;
linux,default-trigger = "heartbeat";
@@ -32,7 +32,7 @@ aliases {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 1000000 0>;
+ pwms = <&pwm 0 1000000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
@@ -48,6 +48,7 @@
/dts-v1/;
#include "imx53-tx53.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "Ka-Ro electronics TX53 module (LVDS)";
@@ -61,7 +62,7 @@ aliases {
backlight0: backlight0 {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
+ pwms = <&pwm2 0 500000 PWM_POLARITY_NORMAL>;
power-supply = <®_3v3>;
brightness-levels = <
0 1 2 3 4 5 6 7 8 9
@@ -81,7 +82,7 @@ backlight0: backlight0 {
backlight1: backlight1 {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 500000 0>;
+ pwms = <&pwm1 0 500000 PWM_POLARITY_NORMAL>;
power-supply = <®_3v3>;
brightness-levels = <
0 1 2 3 4 5 6 7 8 9
@@ -50,7 +50,7 @@ / {
};
&backlight {
- pwms = <&pwm2 0 500000 0>;
+ pwms = <&pwm2 0 500000 PWM_POLARITY_NORMAL>;
/delete-property/ turn-on-delay-ms;
};
@@ -56,7 +56,7 @@ backlight_lvds: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
- pwms = <&pwm2 0 5000000 0>;
+ pwms = <&pwm2 0 5000000 PWM_POLARITY_NORMAL>;
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
@@ -50,7 +50,7 @@ / {
};
&backlight {
- pwms = <&pwm2 0 500000 0>;
+ pwms = <&pwm2 0 500000 PWM_POLARITY_NORMAL>;
/delete-property/ turn-on-delay-ms;
};
@@ -50,7 +50,7 @@ / {
};
&backlight {
- pwms = <&pwm2 0 500000 0>;
+ pwms = <&pwm2 0 500000 PWM_POLARITY_NORMAL>;
/delete-property/ turn-on-delay-ms;
};
@@ -48,7 +48,7 @@ aliases {
backlight0: backlight0 {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
+ pwms = <&pwm2 0 500000 PWM_POLARITY_NORMAL>;
power-supply = <®_lcd0_pwr>;
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
@@ -66,7 +66,7 @@ backlight0: backlight0 {
backlight1: backlight1 {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 500000 0>;
+ pwms = <&pwm1 0 500000 PWM_POLARITY_NORMAL>;
power-supply = <®_lcd1_pwr>;
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
@@ -4,12 +4,14 @@
*
*/
+#include <dt-bindings/pwm/pwm.h>
+
/ {
bl: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_bl_on>;
- pwms = <&pwm1 0 5000000 0>;
+ pwms = <&pwm1 0 5000000 PWM_POLARITY_NORMAL>;
enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
};
@@ -6,6 +6,7 @@
/dts-v1/;
#include "imx7d.dtsi"
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "Boundary Devices i.MX7 Nitrogen7 Board";
@@ -26,7 +27,7 @@ backlight-j9 {
backlight_lcd: backlight-j20 {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000 0>;
+ pwms = <&pwm1 0 5000000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
@@ -5,11 +5,12 @@
/dts-v1/;
#include "imx7d.dtsi"
+#include <dt-bindings/pwm/pwm.h>
/ {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 50000 0>;
+ pwms = <&pwm4 0 50000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 36 72 108 144 180 216 255>;
default-brightness-level = <6>;
};
@@ -5,6 +5,7 @@
/dts-v1/;
#include "imx7d.dtsi"
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "Freescale i.MX7 SabreSD Board";
@@ -129,7 +130,7 @@ reg_fec2_3v3: regulator-fec2-3v3 {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000 0>;
+ pwms = <&pwm1 0 5000000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
@@ -8,6 +8,7 @@
/dts-v1/;
#include "imx7ulp.dtsi"
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "NXP i.MX7ULP EVK";
@@ -24,7 +25,7 @@ memory@60000000 {
backlight {
compatible = "pwm-backlight";
- pwms = <&tpm4 1 50000 0>;
+ pwms = <&tpm4 1 50000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 20 25 30 35 40 100>;
default-brightness-level = <6>;
status = "okay";
@@ -49,7 +49,7 @@ audio_clock: audio_clock {
lcd_backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm3 0 5000000 0>;
+ pwms = <&pwm3 0 5000000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
@@ -149,7 +149,7 @@ bl: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&backlight_pins>;
- pwms = <&pwm10 0 5000000 0>;
+ pwms = <&pwm10 0 5000000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <7>;
enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
@@ -150,7 +150,7 @@ vcck: regulator-vcck {
vin-supply = <&vcc_5v>;
- pwms = <&pwm_cd 0 1148 0>;
+ pwms = <&pwm_cd 0 1148 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -234,7 +234,7 @@ vddee: regulator-vddee {
vin-supply = <&vcc_5v>;
- pwms = <&pwm_cd 1 1148 0>;
+ pwms = <&pwm_cd 1 1148 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -39,7 +39,7 @@ vcck: regulator-vcck {
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
- pwms = <&pwm_cd 0 1148 0>;
+ pwms = <&pwm_cd 0 1148 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -86,7 +86,7 @@ vddee: regulator-vddee {
vin-supply = <&vcc_5v>;
- pwms = <&pwm_cd 1 1148 0>;
+ pwms = <&pwm_cd 1 1148 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -132,7 +132,7 @@ vcck: regulator-vcck {
vin-supply = <&p5v0>;
- pwms = <&pwm_cd 0 12218 0>;
+ pwms = <&pwm_cd 0 12218 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <91 0>;
regulator-boot-on;
@@ -164,7 +164,7 @@ vddee: regulator-vddee {
vin-supply = <&p5v0>;
- pwms = <&pwm_cd 1 12218 0>;
+ pwms = <&pwm_cd 1 12218 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <91 0>;
regulator-boot-on;
@@ -178,7 +178,8 @@ pwm9: dmtimer-pwm-9 {
vibrator {
compatible = "pwm-vibrator";
- pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+ pwms = <&pwm9 0 10000000 PWM_POLARITY_NORMAL>,
+ <&pwm8 0 10000000 PWM_POLARITY_NORMAL>;
pwm-names = "enable", "direction";
direction-duty-cycle-ns = <10000000>;
};
@@ -138,7 +138,7 @@ lcd_in: endpoint {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm11 0 12000000 0>;
+ pwms = <&pwm11 0 12000000 PWM_POLARITY_NORMAL>;
pwm-names = "backlight";
brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <9>; /* => 90 */
@@ -152,7 +152,7 @@ pwm9: dmtimer-pwm {
ir: n900-ir {
compatible = "nokia,n900-ir";
- pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
+ pwms = <&pwm9 0 26316 PWM_POLARITY_NORMAL>; /* 38000 Hz */
};
rom_rng: rng {
@@ -47,7 +47,7 @@ backlight: backlight {
enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
- pwms = <&pwm0 0 1000000 0>;
+ pwms = <&pwm0 0 1000000 PWM_POLARITY_NORMAL>;
post-pwm-on-delay-ms = <10>;
pwm-off-delay-ms = <10>;
power-supply = <&backlight_regulator>;
@@ -101,7 +101,7 @@ vdd_logic: vdd-logic {
compatible = "pwm-regulator";
regulator-name = "vdd_logic";
- pwms = <&pwm1 0 1994 0>;
+ pwms = <&pwm1 0 1994 PWM_POLARITY_NORMAL>;
pwm-supply = <&vcc33_sys>;
pwm-dutycycle-range = <0x7b 0>;
@@ -53,7 +53,7 @@ backlight: backlight {
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <200>;
- pwms = <&pwm0 0 25000 0>;
+ pwms = <&pwm0 0 25000 PWM_POLARITY_NORMAL>;
};
vcc_sys: vsys-regulator {
@@ -159,7 +159,7 @@ led-4 {
buzzer {
compatible = "pwm-beeper";
- pwms = <&pwm 0 1000000 0>;
+ pwms = <&pwm 0 1000000 PWM_POLARITY_NORMAL>;
pinctrl-names = "default";
pinctrl-0 = <&pwm0_out>;
};
@@ -324,7 +324,7 @@ fuelgauge@36 {
vibrator: pwm-vibrator {
compatible = "pwm-vibrator";
- pwms = <&pwm 1 44642 0>;
+ pwms = <&pwm 1 44642 PWM_POLARITY_NORMAL>;
pwm-names = "enable";
vcc-supply = <&vibrator_pwr>;
pinctrl-names = "default";
@@ -42,7 +42,7 @@ ethernet@18000000 {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000 0>;
+ pwms = <&pwm 3 5000000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
pinctrl-names = "default";
@@ -69,7 +69,7 @@ chosen {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 10000 0>;
+ pwms = <&pwm 0 10000 PWM_POLARITY_NORMAL>;
enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
@@ -39,6 +39,8 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/pwm/pwm.h>
+
/ {
aliases {
ethernet0 = &fec1;
@@ -49,7 +51,7 @@ bl: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_bl_on>;
- pwms = <&pwm0 0 5000000 0>;
+ pwms = <&pwm0 0 5000000 PWM_POLARITY_NORMAL>;
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
There is the PWM_POLARITY_NORMAL defined and describled in <dt-bindings/pwm/pwm.h> and used by pwm drivers. This patch converts all '0' constant in pwms parameters into PWM_POLARITY_NORMAL. Replace with sed regexp: 's/(pwms = <&[a-zA-Z_0-9]+ [0-9]+ [0-9]+) 0>/\1 PWM_POLARITY_NORMAL>/' Then: - included pwm.h in some dts/dtsi to fix building errors about undefined symbols. - fixed the patman warnings about the code format; Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> --- arch/arm/boot/dts/am335x-cm-t335.dts | 2 +- arch/arm/boot/dts/am335x-evm.dts | 2 +- arch/arm/boot/dts/am3517-evm.dts | 2 +- arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi | 2 +- arch/arm/boot/dts/at91-kizbox2-common.dtsi | 6 +++--- arch/arm/boot/dts/at91-kizbox3_common.dtsi | 8 ++++---- arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 6 +++--- arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 2 +- arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts | 2 +- arch/arm/boot/dts/at91sam9n12ek.dts | 2 +- arch/arm/boot/dts/at91sam9x5dm.dtsi | 2 +- arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 4 ++-- arch/arm/boot/dts/da850-evm.dts | 2 +- arch/arm/boot/dts/da850-lego-ev3.dts | 4 ++-- arch/arm/boot/dts/exynos4412-midas.dtsi | 2 +- arch/arm/boot/dts/exynos4412-odroidu3.dts | 2 +- arch/arm/boot/dts/exynos5250-snow-common.dtsi | 2 +- arch/arm/boot/dts/exynos5410-odroidxu.dts | 2 +- arch/arm/boot/dts/exynos5420-peach-pit.dts | 2 +- arch/arm/boot/dts/exynos5422-odroidhc1.dts | 2 +- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +- arch/arm/boot/dts/exynos5422-odroidxu4.dts | 2 +- arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi | 4 ++-- arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 +- arch/arm/boot/dts/imx53-tx53-x13x.dts | 5 +++-- arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 2 +- arch/arm/boot/dts/imx6q-display5.dtsi | 2 +- arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts | 2 +- arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts | 2 +- arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi | 4 ++-- arch/arm/boot/dts/imx7-colibri.dtsi | 4 +++- arch/arm/boot/dts/imx7d-nitrogen7.dts | 3 ++- arch/arm/boot/dts/imx7d-pico.dtsi | 3 ++- arch/arm/boot/dts/imx7d-sdb.dts | 3 ++- arch/arm/boot/dts/imx7ulp-evk.dts | 3 ++- arch/arm/boot/dts/iwg20d-q7-common.dtsi | 2 +- arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 2 +- arch/arm/boot/dts/meson8b-ec100.dts | 4 ++-- arch/arm/boot/dts/meson8b-mxq.dts | 4 ++-- arch/arm/boot/dts/meson8b-odroidc1.dts | 4 ++-- arch/arm/boot/dts/motorola-mapphone-common.dtsi | 3 ++- arch/arm/boot/dts/omap3-gta04.dtsi | 2 +- arch/arm/boot/dts/omap3-n900.dts | 2 +- arch/arm/boot/dts/rk3288-veyron-edp.dtsi | 2 +- arch/arm/boot/dts/rk3288-veyron.dtsi | 2 +- arch/arm/boot/dts/rv1108-evb.dts | 2 +- arch/arm/boot/dts/s3c6410-mini6410.dts | 2 +- arch/arm/boot/dts/s5pv210-aries.dtsi | 2 +- arch/arm/boot/dts/s5pv210-smdkv210.dts | 2 +- arch/arm/boot/dts/sun5i-gr8-evb.dts | 2 +- arch/arm/boot/dts/vf-colibri.dtsi | 4 +++- 51 files changed, 76 insertions(+), 66 deletions(-)