| Message ID | 20200316065218.4103-1-mike.looijmans@topic.nl (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: iio: accel: Add bmi088 accelerometer bindings | expand |
On Mon, 16 Mar 2020 07:52:18 +0100 Mike Looijmans <mike.looijmans@topic.nl> wrote: > This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU, > the accelerometer part. > > Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> > --- > .../devicetree/bindings/iio/accel/bmi088.txt | 23 +++++++++++++++++++ Sorry. All new DT bindings need to be in yaml format. Please put this in the same series as the driver. Thanks, Jonathan > 1 file changed, 23 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/bmi088.txt > > diff --git a/Documentation/devicetree/bindings/iio/accel/bmi088.txt b/Documentation/devicetree/bindings/iio/accel/bmi088.txt > new file mode 100644 > index 000000000000..691a47726dbc > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/accel/bmi088.txt > @@ -0,0 +1,23 @@ > +* Bosch BMI088 IMU combining accelerometer and gyroscope > + > +https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf > + > +Required properties: > + > + - compatible : should be "bosch,bmi088_accel" > + - reg : the I2C address of the sensor or the SPI chip select number > + > +Optional properties: > + > + - interrupts : interrupt mapping for GPIO IRQ, it should be configured with > + IRQ_TYPE_EDGE_RISING > + > +Example: > + > +bmi088_accel@1 { > + compatible = "bosch,bmi088_accel"; > + reg = <1>; > + spi-max-frequency = <10000000>; > + interrupt-parent = <&gpio>; > + interrupts = <90 IRQ_TYPE_EDGE_RISING>; > +};
On 22-03-2020 18:37, Jonathan Cameron wrote: > On Mon, 16 Mar 2020 07:52:18 +0100 > Mike Looijmans <mike.looijmans@topic.nl> wrote: > >> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU, >> the accelerometer part. >> >> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> >> --- >> .../devicetree/bindings/iio/accel/bmi088.txt | 23 +++++++++++++++++++ > > Sorry. All new DT bindings need to be in yaml format. > > Please put this in the same series as the driver. sooy, I noticed this too late, patches are underway in separate mails now. Hope that isn't a blocking issue? > > Thanks, > > Jonathan > >> 1 file changed, 23 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/iio/accel/bmi088.txt >> >> diff --git a/Documentation/devicetree/bindings/iio/accel/bmi088.txt b/Documentation/devicetree/bindings/iio/accel/bmi088.txt >> new file mode 100644 >> index 000000000000..691a47726dbc >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iio/accel/bmi088.txt >> @@ -0,0 +1,23 @@ >> +* Bosch BMI088 IMU combining accelerometer and gyroscope >> + >> +https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf >> + >> +Required properties: >> + >> + - compatible : should be "bosch,bmi088_accel" >> + - reg : the I2C address of the sensor or the SPI chip select number >> + >> +Optional properties: >> + >> + - interrupts : interrupt mapping for GPIO IRQ, it should be configured with >> + IRQ_TYPE_EDGE_RISING >> + >> +Example: >> + >> +bmi088_accel@1 { >> + compatible = "bosch,bmi088_accel"; >> + reg = <1>; >> + spi-max-frequency = <10000000>; >> + interrupt-parent = <&gpio>; >> + interrupts = <90 IRQ_TYPE_EDGE_RISING>; >> +}; >
On Mon, 23 Mar 2020 10:56:41 +0100 Mike Looijmans <mike.looijmans@topic.nl> wrote: > On 22-03-2020 18:37, Jonathan Cameron wrote: > > On Mon, 16 Mar 2020 07:52:18 +0100 > > Mike Looijmans <mike.looijmans@topic.nl> wrote: > > > >> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU, > >> the accelerometer part. > >> > >> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> > >> --- > >> .../devicetree/bindings/iio/accel/bmi088.txt | 23 +++++++++++++++++++ > > > > Sorry. All new DT bindings need to be in yaml format. > > > > Please put this in the same series as the driver. > > sooy, I noticed this too late, patches are underway in separate mails > now. Hope that isn't a blocking issue? For next version of either pull them together. Jonathan > > > > > Thanks, > > > > Jonathan > > > >> 1 file changed, 23 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/iio/accel/bmi088.txt > >> > >> diff --git a/Documentation/devicetree/bindings/iio/accel/bmi088.txt b/Documentation/devicetree/bindings/iio/accel/bmi088.txt > >> new file mode 100644 > >> index 000000000000..691a47726dbc > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/iio/accel/bmi088.txt > >> @@ -0,0 +1,23 @@ > >> +* Bosch BMI088 IMU combining accelerometer and gyroscope > >> + > >> +https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf > >> + > >> +Required properties: > >> + > >> + - compatible : should be "bosch,bmi088_accel" > >> + - reg : the I2C address of the sensor or the SPI chip select number > >> + > >> +Optional properties: > >> + > >> + - interrupts : interrupt mapping for GPIO IRQ, it should be configured with > >> + IRQ_TYPE_EDGE_RISING > >> + > >> +Example: > >> + > >> +bmi088_accel@1 { > >> + compatible = "bosch,bmi088_accel"; > >> + reg = <1>; > >> + spi-max-frequency = <10000000>; > >> + interrupt-parent = <&gpio>; > >> + interrupts = <90 IRQ_TYPE_EDGE_RISING>; > >> +}; > > > >
diff --git a/Documentation/devicetree/bindings/iio/accel/bmi088.txt b/Documentation/devicetree/bindings/iio/accel/bmi088.txt new file mode 100644 index 000000000000..691a47726dbc --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bmi088.txt @@ -0,0 +1,23 @@ +* Bosch BMI088 IMU combining accelerometer and gyroscope + +https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf + +Required properties: + + - compatible : should be "bosch,bmi088_accel" + - reg : the I2C address of the sensor or the SPI chip select number + +Optional properties: + + - interrupts : interrupt mapping for GPIO IRQ, it should be configured with + IRQ_TYPE_EDGE_RISING + +Example: + +bmi088_accel@1 { + compatible = "bosch,bmi088_accel"; + reg = <1>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio>; + interrupts = <90 IRQ_TYPE_EDGE_RISING>; +};
This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU, the accelerometer part. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> --- .../devicetree/bindings/iio/accel/bmi088.txt | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/bmi088.txt