| Message ID | 20200325000332.v2.2.I4e01733fa5b818028dc9188ca91438fc54aa5028@changeid (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Marcel Holtmann |
| Headers | show |
| Series | btusb: Introduce the use of vendor extension(s) | expand |
Hi Miao-chen, > This adds a new header to facilitate the opcode and packet structures of > vendor extension(s). For now, we add only the > HCI_VS_MSFT_Read_Supported_Features command from Microsoft vendor > extension. See https://docs.microsoft.com/en-us/windows-hardware/drivers/ > bluetooth/microsoft-defined-bluetooth-hci-commands-and-events# > microsoft-defined-bluetooth-hci-events for more details. > Upon initialization of a hci_dev, we issue a > HCI_VS_MSFT_Read_Supported_Features command to read the supported features > of Microsoft vendor extension if the opcode of Microsoft vendor extension > is valid. See https://docs.microsoft.com/en-us/windows-hardware/drivers/ > bluetooth/microsoft-defined-bluetooth-hci-commands-and-events# > hci_vs_msft_read_supported_features for more details. > This was verified on a device with Intel ThhunderPeak BT controller where > the Microsoft vendor extension features are 0x000000000000003f. > > Signed-off-by: Miao-chen Chou <mcchou@chromium.org> > --- > > Changes in v2: > - Issue a HCI_VS_MSFT_Read_Supported_Features command with > __hci_cmd_sync() instead of constructing a request. > > drivers/bluetooth/btusb.c | 3 ++ > include/net/bluetooth/hci_core.h | 4 ++ > include/net/bluetooth/vendor_hci.h | 51 +++++++++++++++++++ > net/bluetooth/hci_core.c | 78 ++++++++++++++++++++++++++++++ > 4 files changed, 136 insertions(+) > create mode 100644 include/net/bluetooth/vendor_hci.h > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index 4c49f394f174..410d50dbd4e2 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -3738,6 +3738,9 @@ static int btusb_probe(struct usb_interface *intf, > hdev->notify = btusb_notify; > > hdev->msft_ext.opcode = HCI_OP_NOP; > + hdev->msft_ext.features = 0; > + hdev->msft_ext.evt_prefix_len = 0; > + hdev->msft_ext.evt_prefix = NULL; as noted in the other review, let hci_alloc_dev and hci_free_dev deal with this. > > #ifdef CONFIG_PM > err = btusb_config_oob_wake(hdev); > diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h > index 0ec3d9b41d81..f2876c5067a4 100644 > --- a/include/net/bluetooth/hci_core.h > +++ b/include/net/bluetooth/hci_core.h > @@ -30,6 +30,7 @@ > > #include <net/bluetooth/hci.h> > #include <net/bluetooth/hci_sock.h> > +#include <net/bluetooth/vendor_hci.h> > > /* HCI priority */ > #define HCI_PRIO_MAX 7 > @@ -246,6 +247,9 @@ struct amp_assoc { > > struct msft_vnd_ext { > __u16 opcode; > + __u64 features; > + __u8 evt_prefix_len; > + void *evt_prefix; > }; > > struct hci_dev { > diff --git a/include/net/bluetooth/vendor_hci.h b/include/net/bluetooth/vendor_hci.h > new file mode 100644 > index 000000000000..89a6795e672c > --- /dev/null > +++ b/include/net/bluetooth/vendor_hci.h > @@ -0,0 +1,51 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * BlueZ - Bluetooth protocol stack for Linux > + * Copyright (C) 2020 Google Corporation > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation; > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS > + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. > + * IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY > + * CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES > + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN > + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF > + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. > + * > + * ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, > + * COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS > + * SOFTWARE IS DISCLAIMED. > + */ > + > +#ifndef __VENDOR_HCI_H > +#define __VENDOR_HCI_H > + > +#define MSFT_EVT_PREFIX_MAX_LEN 255 > + > +struct msft_cmd_cmp_info { > + __u8 status; > + __u8 sub_opcode; > +} __packed; > + > +/* Microsoft Vendor HCI subcommands */ > +#define MSFT_OP_READ_SUPPORTED_FEATURES 0x00 > +#define MSFT_FEATURE_MASK_RSSI_MONITOR_BREDR_CONN 0x0000000000000001 > +#define MSFT_FEATURE_MASK_RSSI_MONITOR_LE_CONN 0x0000000000000002 > +#define MSFT_FEATURE_MASK_RSSI_MONITOR_LE_ADV 0x0000000000000004 > +#define MSFT_FEATURE_MASK_ADV_MONITOR_LE_ADV 0x0000000000000008 > +#define MSFT_FEATURE_MASK_VERIFY_CURVE 0x0000000000000010 > +#define MSFT_FEATURE_MASK_CONCURRENT_ADV_MONITOR 0x0000000000000020 > +struct msft_cp_read_supported_features { > + __u8 sub_opcode; > +} __packed; > +struct msft_rp_read_supported_features { > + __u64 features; > + __u8 evt_prefix_len; > + __u8 evt_prefix[0]; > +} __packed; > + > +#endif /* __VENDOR_HCI_H */ Lets put this all in net/bluetooth/msft.c for now. > diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c > index dbd2ad3a26ed..1ea32d10ed08 100644 > --- a/net/bluetooth/hci_core.c > +++ b/net/bluetooth/hci_core.c > @@ -1407,6 +1407,76 @@ static void hci_dev_get_bd_addr_from_property(struct hci_dev *hdev) > bacpy(&hdev->public_addr, &ba); > } > > +static void process_msft_vnd_ext_cmd_complete(struct hci_dev *hdev, > + struct sk_buff *skb) > +{ > + struct msft_cmd_cmp_info *info = (void *)skb->data; > + const u8 status = info->status; > + const u16 sub_opcode = __le16_to_cpu(info->sub_opcode); > + > + skb_pull(skb, sizeof(*info)); > + > + if (IS_ERR(skb)) { > + BT_WARN("%s: Microsoft extension response packet invalid", > + hdev->name); > + return; > + } > + > + if (status) { > + BT_WARN("%s: Microsoft extension sub command 0x%2.2x failed", > + hdev->name, sub_opcode); > + return; > + } > + > + BT_DBG("%s: status 0x%2.2x sub opcode 0x%2.2x", hdev->name, status, > + sub_opcode); > + > + switch (sub_opcode) { > + case MSFT_OP_READ_SUPPORTED_FEATURES: { > + struct msft_rp_read_supported_features *rp = (void *)skb->data; > + u8 prefix_len = rp->evt_prefix_len; > + > + hdev->msft_ext.features = __le64_to_cpu(rp->features); > + hdev->msft_ext.evt_prefix_len = prefix_len; > + hdev->msft_ext.evt_prefix = kmalloc(prefix_len, GFP_ATOMIC); Are we really in interrupt context here? I don’t think there is a need for GFP_ATOMIC. > + if (!hdev->msft_ext.evt_prefix) { > + BT_WARN("%s: Microsoft extension invalid event prefix", > + hdev->name); Please start using bt_dev_warn etc. > + return; > + } > + > + memcpy(hdev->msft_ext.evt_prefix, rp->evt_prefix, prefix_len); > + BT_INFO("%s: Microsoft extension features 0x%016llx", > + hdev->name, hdev->msft_ext.features); > + break; > + } > + default: > + BT_WARN("%s: Microsoft extension unknown sub opcode 0x%2.2x", > + hdev->name, sub_opcode); > + break; > + } > +} > + > +static void read_vendor_extension_features(struct hci_dev *hdev) > +{ > + struct sk_buff *skb; > + const u16 msft_opcode = hdev->msft_ext.opcode; > + > + if (msft_opcode != HCI_OP_NOP) { I really prefer it this way if (!something_supported) return; > + struct msft_cp_read_supported_features cp; > + > + cp.sub_opcode = MSFT_OP_READ_SUPPORTED_FEATURES; > + skb = __hci_cmd_sync(hdev, msft_opcode, sizeof(cp), &cp, > + HCI_CMD_TIMEOUT); > + > + process_msft_vnd_ext_cmd_complete(hdev, skb); > + if (skb) { > + kfree_skb(skb); > + skb = NULL; > + } > + } > +} > + > static int hci_dev_do_open(struct hci_dev *hdev) > { > int ret = 0; > @@ -1554,6 +1624,11 @@ static int hci_dev_do_open(struct hci_dev *hdev) > } > } > > + /* Check features supported by HCI extensions after the init procedure > + * completed. > + */ > + read_vendor_extension_features(hdev); > + msft_do_open(hdev); > /* If the HCI Reset command is clearing all diagnostic settings, > * then they need to be reprogrammed after the init procedure > * completed. > @@ -1733,6 +1808,9 @@ int hci_dev_do_close(struct hci_dev *hdev) > cancel_delayed_work_sync(&adv_instance->rpa_expired_cb); > } > > + kfree(hdev->msft_ext.evt_prefix); > + hdev->msft_ext.evt_prefix = NULL; > + msft_do_close(hdev); And let these two function clear, init, free etc. everything except hdev->msft_ext.opcode That said, I would actually also introduce a wrapper msft_set_opcode(hdev, opcode); so that the driver doesn’t have to know the internal on how that opcode is stored. We can also keep the struct msft_ext internal to msft.c and don’t have to expose the internal details. So all stay confined in net/bluetooth/msft.c. > /* Avoid potential lockdep warnings from the *_flush() calls by > * ensuring the workqueue is empty up front. > */ Regards Marcel
On Wed, Mar 25, 2020 at 1:25 AM Marcel Holtmann <marcel@holtmann.org> wrote: > > Hi Miao-chen, > > > This adds a new header to facilitate the opcode and packet structures of > > vendor extension(s). For now, we add only the > > HCI_VS_MSFT_Read_Supported_Features command from Microsoft vendor > > extension. See https://docs.microsoft.com/en-us/windows-hardware/drivers/ > > bluetooth/microsoft-defined-bluetooth-hci-commands-and-events# > > microsoft-defined-bluetooth-hci-events for more details. > > Upon initialization of a hci_dev, we issue a > > HCI_VS_MSFT_Read_Supported_Features command to read the supported features > > of Microsoft vendor extension if the opcode of Microsoft vendor extension > > is valid. See https://docs.microsoft.com/en-us/windows-hardware/drivers/ > > bluetooth/microsoft-defined-bluetooth-hci-commands-and-events# > > hci_vs_msft_read_supported_features for more details. > > This was verified on a device with Intel ThhunderPeak BT controller where > > the Microsoft vendor extension features are 0x000000000000003f. > > > > Signed-off-by: Miao-chen Chou <mcchou@chromium.org> > > --- > > > > Changes in v2: > > - Issue a HCI_VS_MSFT_Read_Supported_Features command with > > __hci_cmd_sync() instead of constructing a request. > > > > drivers/bluetooth/btusb.c | 3 ++ > > include/net/bluetooth/hci_core.h | 4 ++ > > include/net/bluetooth/vendor_hci.h | 51 +++++++++++++++++++ > > net/bluetooth/hci_core.c | 78 ++++++++++++++++++++++++++++++ > > 4 files changed, 136 insertions(+) > > create mode 100644 include/net/bluetooth/vendor_hci.h > > > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > > index 4c49f394f174..410d50dbd4e2 100644 > > --- a/drivers/bluetooth/btusb.c > > +++ b/drivers/bluetooth/btusb.c > > @@ -3738,6 +3738,9 @@ static int btusb_probe(struct usb_interface *intf, > > hdev->notify = btusb_notify; > > > > hdev->msft_ext.opcode = HCI_OP_NOP; > > + hdev->msft_ext.features = 0; > > + hdev->msft_ext.evt_prefix_len = 0; > > + hdev->msft_ext.evt_prefix = NULL; > > as noted in the other review, let hci_alloc_dev and hci_free_dev deal with this. Will address this in v3. > > > > > #ifdef CONFIG_PM > > err = btusb_config_oob_wake(hdev); > > diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h > > index 0ec3d9b41d81..f2876c5067a4 100644 > > --- a/include/net/bluetooth/hci_core.h > > +++ b/include/net/bluetooth/hci_core.h > > @@ -30,6 +30,7 @@ > > > > #include <net/bluetooth/hci.h> > > #include <net/bluetooth/hci_sock.h> > > +#include <net/bluetooth/vendor_hci.h> > > > > /* HCI priority */ > > #define HCI_PRIO_MAX 7 > > @@ -246,6 +247,9 @@ struct amp_assoc { > > > > struct msft_vnd_ext { > > __u16 opcode; > > + __u64 features; > > + __u8 evt_prefix_len; > > + void *evt_prefix; > > }; > > > > struct hci_dev { > > diff --git a/include/net/bluetooth/vendor_hci.h b/include/net/bluetooth/vendor_hci.h > > new file mode 100644 > > index 000000000000..89a6795e672c > > --- /dev/null > > +++ b/include/net/bluetooth/vendor_hci.h > > @@ -0,0 +1,51 @@ > > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > > +/* > > + * BlueZ - Bluetooth protocol stack for Linux > > + * Copyright (C) 2020 Google Corporation > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation; > > + * > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS > > + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. > > + * IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY > > + * CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES > > + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN > > + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF > > + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. > > + * > > + * ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, > > + * COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS > > + * SOFTWARE IS DISCLAIMED. > > + */ > > + > > +#ifndef __VENDOR_HCI_H > > +#define __VENDOR_HCI_H > > + > > +#define MSFT_EVT_PREFIX_MAX_LEN 255 > > + > > +struct msft_cmd_cmp_info { > > + __u8 status; > > + __u8 sub_opcode; > > +} __packed; > > + > > +/* Microsoft Vendor HCI subcommands */ > > +#define MSFT_OP_READ_SUPPORTED_FEATURES 0x00 > > +#define MSFT_FEATURE_MASK_RSSI_MONITOR_BREDR_CONN 0x0000000000000001 > > +#define MSFT_FEATURE_MASK_RSSI_MONITOR_LE_CONN 0x0000000000000002 > > +#define MSFT_FEATURE_MASK_RSSI_MONITOR_LE_ADV 0x0000000000000004 > > +#define MSFT_FEATURE_MASK_ADV_MONITOR_LE_ADV 0x0000000000000008 > > +#define MSFT_FEATURE_MASK_VERIFY_CURVE 0x0000000000000010 > > +#define MSFT_FEATURE_MASK_CONCURRENT_ADV_MONITOR 0x0000000000000020 > > +struct msft_cp_read_supported_features { > > + __u8 sub_opcode; > > +} __packed; > > +struct msft_rp_read_supported_features { > > + __u64 features; > > + __u8 evt_prefix_len; > > + __u8 evt_prefix[0]; > > +} __packed; > > + > > +#endif /* __VENDOR_HCI_H */ > > Lets put this all in net/bluetooth/msft.c for now. Will address in v3. > > > diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c > > index dbd2ad3a26ed..1ea32d10ed08 100644 > > --- a/net/bluetooth/hci_core.c > > +++ b/net/bluetooth/hci_core.c > > @@ -1407,6 +1407,76 @@ static void hci_dev_get_bd_addr_from_property(struct hci_dev *hdev) > > bacpy(&hdev->public_addr, &ba); > > } > > > > +static void process_msft_vnd_ext_cmd_complete(struct hci_dev *hdev, > > + struct sk_buff *skb) > > +{ > > + struct msft_cmd_cmp_info *info = (void *)skb->data; > > + const u8 status = info->status; > > + const u16 sub_opcode = __le16_to_cpu(info->sub_opcode); > > + > > + skb_pull(skb, sizeof(*info)); > > + > > + if (IS_ERR(skb)) { > > + BT_WARN("%s: Microsoft extension response packet invalid", > > + hdev->name); > > + return; > > + } > > + > > + if (status) { > > + BT_WARN("%s: Microsoft extension sub command 0x%2.2x failed", > > + hdev->name, sub_opcode); > > + return; > > + } > > + > > + BT_DBG("%s: status 0x%2.2x sub opcode 0x%2.2x", hdev->name, status, > > + sub_opcode); > > + > > + switch (sub_opcode) { > > + case MSFT_OP_READ_SUPPORTED_FEATURES: { > > + struct msft_rp_read_supported_features *rp = (void *)skb->data; > > + u8 prefix_len = rp->evt_prefix_len; > > + > > + hdev->msft_ext.features = __le64_to_cpu(rp->features); > > + hdev->msft_ext.evt_prefix_len = prefix_len; > > + hdev->msft_ext.evt_prefix = kmalloc(prefix_len, GFP_ATOMIC); > > Are we really in interrupt context here? I don’t think there is a need for GFP_ATOMIC. Not really, will change this to GFP_KERNEL. > > > + if (!hdev->msft_ext.evt_prefix) { > > + BT_WARN("%s: Microsoft extension invalid event prefix", > > + hdev->name); > > Please start using bt_dev_warn etc. Will address in v3. > > > + return; > > + } > > + > > + memcpy(hdev->msft_ext.evt_prefix, rp->evt_prefix, prefix_len); > > + BT_INFO("%s: Microsoft extension features 0x%016llx", > > + hdev->name, hdev->msft_ext.features); > > + break; > > + } > > + default: > > + BT_WARN("%s: Microsoft extension unknown sub opcode 0x%2.2x", > > + hdev->name, sub_opcode); > > + break; > > + } > > +} > > + > > +static void read_vendor_extension_features(struct hci_dev *hdev) > > +{ > > + struct sk_buff *skb; > > + const u16 msft_opcode = hdev->msft_ext.opcode; > > + > > + if (msft_opcode != HCI_OP_NOP) { > > I really prefer it this way > > if (!something_supported) > return; Will address in v3. > > > + struct msft_cp_read_supported_features cp; > > + > > + cp.sub_opcode = MSFT_OP_READ_SUPPORTED_FEATURES; > > + skb = __hci_cmd_sync(hdev, msft_opcode, sizeof(cp), &cp, > > + HCI_CMD_TIMEOUT); > > + > > + process_msft_vnd_ext_cmd_complete(hdev, skb); > > + if (skb) { > > + kfree_skb(skb); > > + skb = NULL; > > + } > > + } > > +} > > + > > static int hci_dev_do_open(struct hci_dev *hdev) > > { > > int ret = 0; > > @@ -1554,6 +1624,11 @@ static int hci_dev_do_open(struct hci_dev *hdev) > > } > > } > > > > + /* Check features supported by HCI extensions after the init procedure > > + * completed. > > + */ > > + read_vendor_extension_features(hdev); > > + > > msft_do_open(hdev); > > > > /* If the HCI Reset command is clearing all diagnostic settings, > > * then they need to be reprogrammed after the init procedure > > * completed. > > @@ -1733,6 +1808,9 @@ int hci_dev_do_close(struct hci_dev *hdev) > > cancel_delayed_work_sync(&adv_instance->rpa_expired_cb); > > } > > > > + kfree(hdev->msft_ext.evt_prefix); > > + hdev->msft_ext.evt_prefix = NULL; > > + > > msft_do_close(hdev); > > > And let these two function clear, init, free etc. everything except hdev->msft_ext.opcode > > That said, I would actually also introduce a wrapper msft_set_opcode(hdev, opcode); so that the driver doesn’t have to know the internal on how that opcode is stored. > > We can also keep the struct msft_ext internal to msft.c and don’t have to expose the internal details. So all stay confined in net/bluetooth/msft.c. Good point. Will add net/bluetooth/msft.c in v3. > > > /* Avoid potential lockdep warnings from the *_flush() calls by > > * ensuring the workqueue is empty up front. > > */ Regards, Miao
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 4c49f394f174..410d50dbd4e2 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -3738,6 +3738,9 @@ static int btusb_probe(struct usb_interface *intf, hdev->notify = btusb_notify; hdev->msft_ext.opcode = HCI_OP_NOP; + hdev->msft_ext.features = 0; + hdev->msft_ext.evt_prefix_len = 0; + hdev->msft_ext.evt_prefix = NULL; #ifdef CONFIG_PM err = btusb_config_oob_wake(hdev); diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 0ec3d9b41d81..f2876c5067a4 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -30,6 +30,7 @@ #include <net/bluetooth/hci.h> #include <net/bluetooth/hci_sock.h> +#include <net/bluetooth/vendor_hci.h> /* HCI priority */ #define HCI_PRIO_MAX 7 @@ -246,6 +247,9 @@ struct amp_assoc { struct msft_vnd_ext { __u16 opcode; + __u64 features; + __u8 evt_prefix_len; + void *evt_prefix; }; struct hci_dev { diff --git a/include/net/bluetooth/vendor_hci.h b/include/net/bluetooth/vendor_hci.h new file mode 100644 index 000000000000..89a6795e672c --- /dev/null +++ b/include/net/bluetooth/vendor_hci.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * BlueZ - Bluetooth protocol stack for Linux + * Copyright (C) 2020 Google Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. + * IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY + * CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + * ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, + * COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS + * SOFTWARE IS DISCLAIMED. + */ + +#ifndef __VENDOR_HCI_H +#define __VENDOR_HCI_H + +#define MSFT_EVT_PREFIX_MAX_LEN 255 + +struct msft_cmd_cmp_info { + __u8 status; + __u8 sub_opcode; +} __packed; + +/* Microsoft Vendor HCI subcommands */ +#define MSFT_OP_READ_SUPPORTED_FEATURES 0x00 +#define MSFT_FEATURE_MASK_RSSI_MONITOR_BREDR_CONN 0x0000000000000001 +#define MSFT_FEATURE_MASK_RSSI_MONITOR_LE_CONN 0x0000000000000002 +#define MSFT_FEATURE_MASK_RSSI_MONITOR_LE_ADV 0x0000000000000004 +#define MSFT_FEATURE_MASK_ADV_MONITOR_LE_ADV 0x0000000000000008 +#define MSFT_FEATURE_MASK_VERIFY_CURVE 0x0000000000000010 +#define MSFT_FEATURE_MASK_CONCURRENT_ADV_MONITOR 0x0000000000000020 +struct msft_cp_read_supported_features { + __u8 sub_opcode; +} __packed; +struct msft_rp_read_supported_features { + __u64 features; + __u8 evt_prefix_len; + __u8 evt_prefix[0]; +} __packed; + +#endif /* __VENDOR_HCI_H */ diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index dbd2ad3a26ed..1ea32d10ed08 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1407,6 +1407,76 @@ static void hci_dev_get_bd_addr_from_property(struct hci_dev *hdev) bacpy(&hdev->public_addr, &ba); } +static void process_msft_vnd_ext_cmd_complete(struct hci_dev *hdev, + struct sk_buff *skb) +{ + struct msft_cmd_cmp_info *info = (void *)skb->data; + const u8 status = info->status; + const u16 sub_opcode = __le16_to_cpu(info->sub_opcode); + + skb_pull(skb, sizeof(*info)); + + if (IS_ERR(skb)) { + BT_WARN("%s: Microsoft extension response packet invalid", + hdev->name); + return; + } + + if (status) { + BT_WARN("%s: Microsoft extension sub command 0x%2.2x failed", + hdev->name, sub_opcode); + return; + } + + BT_DBG("%s: status 0x%2.2x sub opcode 0x%2.2x", hdev->name, status, + sub_opcode); + + switch (sub_opcode) { + case MSFT_OP_READ_SUPPORTED_FEATURES: { + struct msft_rp_read_supported_features *rp = (void *)skb->data; + u8 prefix_len = rp->evt_prefix_len; + + hdev->msft_ext.features = __le64_to_cpu(rp->features); + hdev->msft_ext.evt_prefix_len = prefix_len; + hdev->msft_ext.evt_prefix = kmalloc(prefix_len, GFP_ATOMIC); + if (!hdev->msft_ext.evt_prefix) { + BT_WARN("%s: Microsoft extension invalid event prefix", + hdev->name); + return; + } + + memcpy(hdev->msft_ext.evt_prefix, rp->evt_prefix, prefix_len); + BT_INFO("%s: Microsoft extension features 0x%016llx", + hdev->name, hdev->msft_ext.features); + break; + } + default: + BT_WARN("%s: Microsoft extension unknown sub opcode 0x%2.2x", + hdev->name, sub_opcode); + break; + } +} + +static void read_vendor_extension_features(struct hci_dev *hdev) +{ + struct sk_buff *skb; + const u16 msft_opcode = hdev->msft_ext.opcode; + + if (msft_opcode != HCI_OP_NOP) { + struct msft_cp_read_supported_features cp; + + cp.sub_opcode = MSFT_OP_READ_SUPPORTED_FEATURES; + skb = __hci_cmd_sync(hdev, msft_opcode, sizeof(cp), &cp, + HCI_CMD_TIMEOUT); + + process_msft_vnd_ext_cmd_complete(hdev, skb); + if (skb) { + kfree_skb(skb); + skb = NULL; + } + } +} + static int hci_dev_do_open(struct hci_dev *hdev) { int ret = 0; @@ -1554,6 +1624,11 @@ static int hci_dev_do_open(struct hci_dev *hdev) } } + /* Check features supported by HCI extensions after the init procedure + * completed. + */ + read_vendor_extension_features(hdev); + /* If the HCI Reset command is clearing all diagnostic settings, * then they need to be reprogrammed after the init procedure * completed. @@ -1733,6 +1808,9 @@ int hci_dev_do_close(struct hci_dev *hdev) cancel_delayed_work_sync(&adv_instance->rpa_expired_cb); } + kfree(hdev->msft_ext.evt_prefix); + hdev->msft_ext.evt_prefix = NULL; + /* Avoid potential lockdep warnings from the *_flush() calls by * ensuring the workqueue is empty up front. */
This adds a new header to facilitate the opcode and packet structures of vendor extension(s). For now, we add only the HCI_VS_MSFT_Read_Supported_Features command from Microsoft vendor extension. See https://docs.microsoft.com/en-us/windows-hardware/drivers/ bluetooth/microsoft-defined-bluetooth-hci-commands-and-events# microsoft-defined-bluetooth-hci-events for more details. Upon initialization of a hci_dev, we issue a HCI_VS_MSFT_Read_Supported_Features command to read the supported features of Microsoft vendor extension if the opcode of Microsoft vendor extension is valid. See https://docs.microsoft.com/en-us/windows-hardware/drivers/ bluetooth/microsoft-defined-bluetooth-hci-commands-and-events# hci_vs_msft_read_supported_features for more details. This was verified on a device with Intel ThhunderPeak BT controller where the Microsoft vendor extension features are 0x000000000000003f. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> --- Changes in v2: - Issue a HCI_VS_MSFT_Read_Supported_Features command with __hci_cmd_sync() instead of constructing a request. drivers/bluetooth/btusb.c | 3 ++ include/net/bluetooth/hci_core.h | 4 ++ include/net/bluetooth/vendor_hci.h | 51 +++++++++++++++++++ net/bluetooth/hci_core.c | 78 ++++++++++++++++++++++++++++++ 4 files changed, 136 insertions(+) create mode 100644 include/net/bluetooth/vendor_hci.h