mbox series

[RESENDING,RFC,0/4] Add logic to consolidate TRBs for Synopsys xHC

Message ID cover.1585297723.git.joglekar@synopsys.com (mailing list archive)
Headers show
Series Add logic to consolidate TRBs for Synopsys xHC | expand

Message

Tejas Joglekar March 27, 2020, 8:52 a.m. UTC
The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for
each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8
for HS. The controller loads and updates the TRB cache from the
transfer ring in system memory whenever the driver issues a start
transfer or update transfer command.

For chained TRBs, the Synopsys xHC requires that the total amount of
bytes for all TRBs loaded in the TRB cache be greater than or equal to
1 MPS. Or the chain ends within the TRB cache (with a last TRB).

If this requirement is not met, the controller will not be able to
send or receive a packet and it will hang causing a driver timeout and
error.

This patch set adds logic to the XHCI driver to detect and prevent this
from happening along with the quirk to enable this logic for Synopsys
HAPS platform.

Based on Mathias's feedback on previous implementation where consolidation
was done in TRB cache, with this patch series the implementation is done
during mapping of the URB by consolidating the SG list into a temporary
buffer if the SG list buffer sizes within TRB_CACHE_SIZE is less than MPS.


Tejas Joglekar (4):
  dt-bindings: usb: Add snps,consolidate-sgl & consolidate-sgl
  usb: xhci: Set quirk for XHCI_CONSOLIDATE_SG_LIST
  usb: dwc3: Add device property consolidate-sgl
  usb: xhci: Use temporary buffer to consolidate SG

Resending as 'umlaut' is not accepted by some servers in email.

 Documentation/devicetree/bindings/usb/dwc3.txt     |   3 +
 Documentation/devicetree/bindings/usb/usb-xhci.txt |   3 +
 drivers/usb/core/hcd.c                             |   8 ++
 drivers/usb/dwc3/core.c                            |   2 +
 drivers/usb/dwc3/core.h                            |   2 +
 drivers/usb/dwc3/dwc3-haps.c                       |   1 +
 drivers/usb/dwc3/host.c                            |   5 +-
 drivers/usb/host/xhci-pci.c                        |   3 +
 drivers/usb/host/xhci-plat.c                       |   3 +
 drivers/usb/host/xhci-ring.c                       |   2 +-
 drivers/usb/host/xhci.c                            | 128 +++++++++++++++++++++
 drivers/usb/host/xhci.h                            |   5 +
 12 files changed, 163 insertions(+), 2 deletions(-)

Comments

Greg KH March 27, 2020, 9:28 a.m. UTC | #1
On Fri, Mar 27, 2020 at 02:22:23PM +0530, Tejas Joglekar wrote:
> The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for
> each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8
> for HS. The controller loads and updates the TRB cache from the
> transfer ring in system memory whenever the driver issues a start
> transfer or update transfer command.
> 
> For chained TRBs, the Synopsys xHC requires that the total amount of
> bytes for all TRBs loaded in the TRB cache be greater than or equal to
> 1 MPS. Or the chain ends within the TRB cache (with a last TRB).
> 
> If this requirement is not met, the controller will not be able to
> send or receive a packet and it will hang causing a driver timeout and
> error.
> 
> This patch set adds logic to the XHCI driver to detect and prevent this
> from happening along with the quirk to enable this logic for Synopsys
> HAPS platform.
> 
> Based on Mathias's feedback on previous implementation where consolidation
> was done in TRB cache, with this patch series the implementation is done
> during mapping of the URB by consolidating the SG list into a temporary
> buffer if the SG list buffer sizes within TRB_CACHE_SIZE is less than MPS.
> 
> 
> Tejas Joglekar (4):
>   dt-bindings: usb: Add snps,consolidate-sgl & consolidate-sgl
>   usb: xhci: Set quirk for XHCI_CONSOLIDATE_SG_LIST
>   usb: dwc3: Add device property consolidate-sgl
>   usb: xhci: Use temporary buffer to consolidate SG
> 
> Resending as 'umlaut' is not accepted by some servers in email.

Only patch 4/4 seems to have gone through :(
Tejas Joglekar March 27, 2020, 9:43 a.m. UTC | #2
On 3/27/2020 2:58 PM, Greg KH wrote:
> On Fri, Mar 27, 2020 at 02:22:23PM +0530, Tejas Joglekar wrote:
>> The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for
>> each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8
>> for HS. The controller loads and updates the TRB cache from the
>> transfer ring in system memory whenever the driver issues a start
>> transfer or update transfer command.
>>
>> For chained TRBs, the Synopsys xHC requires that the total amount of
>> bytes for all TRBs loaded in the TRB cache be greater than or equal to
>> 1 MPS. Or the chain ends within the TRB cache (with a last TRB).
>>
>> If this requirement is not met, the controller will not be able to
>> send or receive a packet and it will hang causing a driver timeout and
>> error.
>>
>> This patch set adds logic to the XHCI driver to detect and prevent this
>> from happening along with the quirk to enable this logic for Synopsys
>> HAPS platform.
>>
>> Based on Mathias's feedback on previous implementation where consolidation
>> was done in TRB cache, with this patch series the implementation is done
>> during mapping of the URB by consolidating the SG list into a temporary
>> buffer if the SG list buffer sizes within TRB_CACHE_SIZE is less than MPS.
>>
>>
>> Tejas Joglekar (4):
>>   dt-bindings: usb: Add snps,consolidate-sgl & consolidate-sgl
>>   usb: xhci: Set quirk for XHCI_CONSOLIDATE_SG_LIST
>>   usb: dwc3: Add device property consolidate-sgl
>>   usb: xhci: Use temporary buffer to consolidate SG
>>
>> Resending as 'umlaut' is not accepted by some servers in email.
> 
> Only patch 4/4 seems to have gone through :(
> 

Resent the missing patches