| Message ID | 20200317093922.20785-24-lkundrak@v3.sk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | DT: Improve validation for Marvell SoCs | expand |
On Tue, Mar 17, 2020 at 10:39:17AM +0100, Lubomir Rintel wrote: > Convert the mrvl,intc binding to DT schema format using json-schema. > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> > --- > .../interrupt-controller/mrvl,intc.txt | 64 -------- > .../interrupt-controller/mrvl,intc.yaml | 144 ++++++++++++++++++ > 2 files changed, 144 insertions(+), 64 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt > deleted file mode 100644 > index a0ed02725a9d7..0000000000000 > --- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt > +++ /dev/null > @@ -1,64 +0,0 @@ > -* Marvell MMP Interrupt controller > - > -Required properties: > -- compatible : Should be > - "mrvl,mmp-intc" on Marvel MMP, > - "mrvl,mmp2-intc" along with "mrvl,mmp2-mux-intc" on MMP2 or > - "marvell,mmp3-intc" with "mrvl,mmp2-mux-intc" on MMP3 > -- reg : Address and length of the register set of the interrupt controller. > - If the interrupt controller is intc, address and length means the range > - of the whole interrupt controller. The "marvell,mmp3-intc" controller > - also has a secondary range for the second CPU core. If the interrupt > - controller is mux-intc, address and length means one register. Since > - address of mux-intc is in the range of intc. mux-intc is secondary > - interrupt controller. > -- reg-names : Name of the register set of the interrupt controller. It's > - only required in mux-intc interrupt controller. > -- interrupts : Should be the port interrupt shared by mux interrupts. It's > - only required in mux-intc interrupt controller. > -- interrupt-controller : Identifies the node as an interrupt controller. > -- #interrupt-cells : Specifies the number of cells needed to encode an > - interrupt source. > -- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt > - controller. > -- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge > - detection first. > - > -Example: > - intc: interrupt-controller@d4282000 { > - compatible = "mrvl,mmp2-intc"; > - interrupt-controller; > - #interrupt-cells = <1>; > - reg = <0xd4282000 0x1000>; > - mrvl,intc-nr-irqs = <64>; > - }; > - > - intcmux4@d4282150 { > - compatible = "mrvl,mmp2-mux-intc"; > - interrupts = <4>; > - interrupt-controller; > - #interrupt-cells = <1>; > - reg = <0x150 0x4>, <0x168 0x4>; > - reg-names = "mux status", "mux mask"; > - mrvl,intc-nr-irqs = <2>; > - }; > - > -* Marvell Orion Interrupt controller > - > -Required properties > -- compatible : Should be "marvell,orion-intc". > -- #interrupt-cells: Specifies the number of cells needed to encode an > - interrupt source. Supported value is <1>. > -- interrupt-controller : Declare this node to be an interrupt controller. > -- reg : Interrupt mask address. A list of 4 byte ranges, one per controller. > - One entry in the list represents 32 interrupts. > - > -Example: > - > - intc: interrupt-controller { > - compatible = "marvell,orion-intc", "marvell,intc"; > - interrupt-controller; > - #interrupt-cells = <1>; > - reg = <0xfed20204 0x04>, > - <0xfed20214 0x04>; > - }; > diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml > new file mode 100644 > index 0000000000000..f0644f7d7e1d2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml > @@ -0,0 +1,144 @@ > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Marvell MMP/Orion Interrupt controller bindings > + > +maintainers: > + - devicetree@vger.kernel.org > + > +allOf: > + - $ref: /schemas/interrupt-controller.yaml# Drop this. It is already applied based on matching on the node name. > + - if: > + properties: > + compatible: > + not: > + contains: > + const: marvell,orion-intc > + then: > + required: > + - mrvl,intc-nr-irqs > + - if: > + properties: > + compatible: > + contains: > + enum: > + - mrvl,mmp-intc > + - mrvl,mmp2-intc > + then: > + properties: > + reg: > + minItems: 1 > + maxItems: 1 Drop minItems, as just 'maxItems: 1' is enough. > + - if: > + properties: > + compatible: > + contains: > + enum: > + - marvell,mmp3-intc > + - mrvl,mmp2-mux-intc > + then: > + properties: > + reg: > + minItems: 2 > + maxItems: 2 Just 'minItems: 2'. > + - if: > + properties: > + compatible: > + contains: > + const: marvell,orion-intc > + then: > + properties: > + reg: > + minItems: 1 > + maxItems: 2 Normally, for a compatible this would not vary... In any case, move this to the main section and drop this if. > + - if: > + properties: > + compatible: > + contains: > + const: mrvl,mmp2-mux-intc > + then: > + properties: > + interrupts: > + minItems: 1 > + maxItems: 1 Just 'maxItems' > + reg-names: > + minItems: 2 > + maxItems: 2 These are redundant as 'items' size implies this. > + items: > + - const: 'mux status' > + - const: 'mux mask' Move this to the main section. > + required: > + - interrupts > + else: > + properties: > + interrupts: false > + > +properties: > + '#interrupt-cells': > + const: 1 > + > + compatible: > + enum: > + - mrvl,mmp-intc > + - mrvl,mmp2-intc > + - marvell,mmp3-intc > + - marvell,orion-intc > + - mrvl,mmp2-mux-intc > + > + reg: true > + > + reg-names: true > + > + interrupts: true > + > + interrupt-controller: true > + > + mrvl,intc-nr-irqs: > + description: | > + Specifies the number of interrupts in the interrupt controller. > + $ref: /schemas/types.yaml#/definitions/uint32 Is there a max number? > + > + mrvl,clr-mfp-irq: > + description: | > + Specifies the interrupt that needs to clear MFP edge detection first. > + $ref: /schemas/types.yaml#/definitions/uint32 Constraints? > + > +required: > + - '#interrupt-cells' > + - compatible > + - reg > + - interrupt-controller > + > +additionalProperties: false > + > +examples: > + - | > + interrupt-controller@d4282000 { > + compatible = "mrvl,mmp2-intc"; > + interrupt-controller; > + #interrupt-cells = <1>; > + reg = <0xd4282000 0x1000>; > + mrvl,intc-nr-irqs = <64>; > + }; > + > + interrupt-controller@d4282150 { > + compatible = "mrvl,mmp2-mux-intc"; > + interrupts = <4>; > + interrupt-controller; > + #interrupt-cells = <1>; > + reg = <0x150 0x4>, <0x168 0x4>; > + reg-names = "mux status", "mux mask"; > + mrvl,intc-nr-irqs = <2>; > + }; > + - | > + interrupt-controller@fed20204 { > + compatible = "marvell,orion-intc"; > + interrupt-controller; > + #interrupt-cells = <1>; > + reg = <0xfed20204 0x04>, > + <0xfed20214 0x04>; > + }; > + > +... > -- > 2.25.1 >
On Fri, Mar 27, 2020 at 01:42:07PM -0600, Rob Herring wrote: > On Tue, Mar 17, 2020 at 10:39:17AM +0100, Lubomir Rintel wrote: > > Convert the mrvl,intc binding to DT schema format using json-schema. > > > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> > > --- > > .../interrupt-controller/mrvl,intc.txt | 64 -------- > > .../interrupt-controller/mrvl,intc.yaml | 144 ++++++++++++++++++ > > 2 files changed, 144 insertions(+), 64 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt > > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml > > > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt > > deleted file mode 100644 > > index a0ed02725a9d7..0000000000000 > > --- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt > > +++ /dev/null > > @@ -1,64 +0,0 @@ > > -* Marvell MMP Interrupt controller > > - > > -Required properties: > > -- compatible : Should be > > - "mrvl,mmp-intc" on Marvel MMP, > > - "mrvl,mmp2-intc" along with "mrvl,mmp2-mux-intc" on MMP2 or > > - "marvell,mmp3-intc" with "mrvl,mmp2-mux-intc" on MMP3 > > -- reg : Address and length of the register set of the interrupt controller. > > - If the interrupt controller is intc, address and length means the range > > - of the whole interrupt controller. The "marvell,mmp3-intc" controller > > - also has a secondary range for the second CPU core. If the interrupt > > - controller is mux-intc, address and length means one register. Since > > - address of mux-intc is in the range of intc. mux-intc is secondary > > - interrupt controller. > > -- reg-names : Name of the register set of the interrupt controller. It's > > - only required in mux-intc interrupt controller. > > -- interrupts : Should be the port interrupt shared by mux interrupts. It's > > - only required in mux-intc interrupt controller. > > -- interrupt-controller : Identifies the node as an interrupt controller. > > -- #interrupt-cells : Specifies the number of cells needed to encode an > > - interrupt source. > > -- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt > > - controller. > > -- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge > > - detection first. > > - > > -Example: > > - intc: interrupt-controller@d4282000 { > > - compatible = "mrvl,mmp2-intc"; > > - interrupt-controller; > > - #interrupt-cells = <1>; > > - reg = <0xd4282000 0x1000>; > > - mrvl,intc-nr-irqs = <64>; > > - }; > > - > > - intcmux4@d4282150 { > > - compatible = "mrvl,mmp2-mux-intc"; > > - interrupts = <4>; > > - interrupt-controller; > > - #interrupt-cells = <1>; > > - reg = <0x150 0x4>, <0x168 0x4>; > > - reg-names = "mux status", "mux mask"; > > - mrvl,intc-nr-irqs = <2>; > > - }; > > - > > -* Marvell Orion Interrupt controller > > - > > -Required properties > > -- compatible : Should be "marvell,orion-intc". > > -- #interrupt-cells: Specifies the number of cells needed to encode an > > - interrupt source. Supported value is <1>. > > -- interrupt-controller : Declare this node to be an interrupt controller. > > -- reg : Interrupt mask address. A list of 4 byte ranges, one per controller. > > - One entry in the list represents 32 interrupts. > > - > > -Example: > > - > > - intc: interrupt-controller { > > - compatible = "marvell,orion-intc", "marvell,intc"; > > - interrupt-controller; > > - #interrupt-cells = <1>; > > - reg = <0xfed20204 0x04>, > > - <0xfed20214 0x04>; > > - }; > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml > > new file mode 100644 > > index 0000000000000..f0644f7d7e1d2 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml > > @@ -0,0 +1,144 @@ > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Marvell MMP/Orion Interrupt controller bindings > > + > > +maintainers: > > + - devicetree@vger.kernel.org > > + > > +allOf: > > + - $ref: /schemas/interrupt-controller.yaml# > > Drop this. It is already applied based on matching on the node name. > > > + - if: > > + properties: > > + compatible: > > + not: > > + contains: > > + const: marvell,orion-intc > > + then: > > + required: > > + - mrvl,intc-nr-irqs > > + - if: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - mrvl,mmp-intc > > + - mrvl,mmp2-intc > > + then: > > + properties: > > + reg: > > + minItems: 1 > > + maxItems: 1 > > Drop minItems, as just 'maxItems: 1' is enough. > > > + - if: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - marvell,mmp3-intc > > + - mrvl,mmp2-mux-intc > > + then: > > + properties: > > + reg: > > + minItems: 2 > > + maxItems: 2 > > Just 'minItems: 2'. > > > + - if: > > + properties: > > + compatible: > > + contains: > > + const: marvell,orion-intc > > + then: > > + properties: > > + reg: > > + minItems: 1 > > + maxItems: 2 > > Normally, for a compatible this would not vary... > > In any case, move this to the main section and drop this if. > > > + - if: > > + properties: > > + compatible: > > + contains: > > + const: mrvl,mmp2-mux-intc > > + then: > > + properties: > > + interrupts: > > + minItems: 1 > > + maxItems: 1 > > Just 'maxItems' > > > + reg-names: > > + minItems: 2 > > + maxItems: 2 > > These are redundant as 'items' size implies this. > > > + items: > > + - const: 'mux status' > > + - const: 'mux mask' > > Move this to the main section. > > > + required: > > + - interrupts > > + else: > > + properties: > > + interrupts: false > > + > > +properties: > > + '#interrupt-cells': > > + const: 1 > > + > > + compatible: > > + enum: > > + - mrvl,mmp-intc > > + - mrvl,mmp2-intc > > + - marvell,mmp3-intc > > + - marvell,orion-intc > > + - mrvl,mmp2-mux-intc > > + > > + reg: true > > + > > + reg-names: true > > + > > + interrupts: true > > + > > + interrupt-controller: true > > + > > + mrvl,intc-nr-irqs: > > + description: | > > + Specifies the number of interrupts in the interrupt controller. > > + $ref: /schemas/types.yaml#/definitions/uint32 > > Is there a max number? There's none in the original bindings document or enforced by the driver. > > + > > + mrvl,clr-mfp-irq: > > + description: | > > + Specifies the interrupt that needs to clear MFP edge detection first. > > + $ref: /schemas/types.yaml#/definitions/uint32 > > Constraints? I don't know how should this be constrained and the original bindings document is not helpful. > > + > > +required: > > + - '#interrupt-cells' > > + - compatible > > + - reg > > + - interrupt-controller > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + interrupt-controller@d4282000 { > > + compatible = "mrvl,mmp2-intc"; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + reg = <0xd4282000 0x1000>; > > + mrvl,intc-nr-irqs = <64>; > > + }; > > + > > + interrupt-controller@d4282150 { > > + compatible = "mrvl,mmp2-mux-intc"; > > + interrupts = <4>; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + reg = <0x150 0x4>, <0x168 0x4>; > > + reg-names = "mux status", "mux mask"; > > + mrvl,intc-nr-irqs = <2>; > > + }; > > + - | > > + interrupt-controller@fed20204 { > > + compatible = "marvell,orion-intc"; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + reg = <0xfed20204 0x04>, > > + <0xfed20214 0x04>; > > + }; > > + > > +... > > -- > > 2.25.1 > >
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt deleted file mode 100644 index a0ed02725a9d7..0000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Marvell MMP Interrupt controller - -Required properties: -- compatible : Should be - "mrvl,mmp-intc" on Marvel MMP, - "mrvl,mmp2-intc" along with "mrvl,mmp2-mux-intc" on MMP2 or - "marvell,mmp3-intc" with "mrvl,mmp2-mux-intc" on MMP3 -- reg : Address and length of the register set of the interrupt controller. - If the interrupt controller is intc, address and length means the range - of the whole interrupt controller. The "marvell,mmp3-intc" controller - also has a secondary range for the second CPU core. If the interrupt - controller is mux-intc, address and length means one register. Since - address of mux-intc is in the range of intc. mux-intc is secondary - interrupt controller. -- reg-names : Name of the register set of the interrupt controller. It's - only required in mux-intc interrupt controller. -- interrupts : Should be the port interrupt shared by mux interrupts. It's - only required in mux-intc interrupt controller. -- interrupt-controller : Identifies the node as an interrupt controller. -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. -- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt - controller. -- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge - detection first. - -Example: - intc: interrupt-controller@d4282000 { - compatible = "mrvl,mmp2-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xd4282000 0x1000>; - mrvl,intc-nr-irqs = <64>; - }; - - intcmux4@d4282150 { - compatible = "mrvl,mmp2-mux-intc"; - interrupts = <4>; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x150 0x4>, <0x168 0x4>; - reg-names = "mux status", "mux mask"; - mrvl,intc-nr-irqs = <2>; - }; - -* Marvell Orion Interrupt controller - -Required properties -- compatible : Should be "marvell,orion-intc". -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. Supported value is <1>. -- interrupt-controller : Declare this node to be an interrupt controller. -- reg : Interrupt mask address. A list of 4 byte ranges, one per controller. - One entry in the list represents 32 interrupts. - -Example: - - intc: interrupt-controller { - compatible = "marvell,orion-intc", "marvell,intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xfed20204 0x04>, - <0xfed20214 0x04>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml new file mode 100644 index 0000000000000..f0644f7d7e1d2 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml @@ -0,0 +1,144 @@ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP/Orion Interrupt controller bindings + +maintainers: + - devicetree@vger.kernel.org + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + - if: + properties: + compatible: + not: + contains: + const: marvell,orion-intc + then: + required: + - mrvl,intc-nr-irqs + - if: + properties: + compatible: + contains: + enum: + - mrvl,mmp-intc + - mrvl,mmp2-intc + then: + properties: + reg: + minItems: 1 + maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - marvell,mmp3-intc + - mrvl,mmp2-mux-intc + then: + properties: + reg: + minItems: 2 + maxItems: 2 + - if: + properties: + compatible: + contains: + const: marvell,orion-intc + then: + properties: + reg: + minItems: 1 + maxItems: 2 + - if: + properties: + compatible: + contains: + const: mrvl,mmp2-mux-intc + then: + properties: + interrupts: + minItems: 1 + maxItems: 1 + reg-names: + minItems: 2 + maxItems: 2 + items: + - const: 'mux status' + - const: 'mux mask' + required: + - interrupts + else: + properties: + interrupts: false + +properties: + '#interrupt-cells': + const: 1 + + compatible: + enum: + - mrvl,mmp-intc + - mrvl,mmp2-intc + - marvell,mmp3-intc + - marvell,orion-intc + - mrvl,mmp2-mux-intc + + reg: true + + reg-names: true + + interrupts: true + + interrupt-controller: true + + mrvl,intc-nr-irqs: + description: | + Specifies the number of interrupts in the interrupt controller. + $ref: /schemas/types.yaml#/definitions/uint32 + + mrvl,clr-mfp-irq: + description: | + Specifies the interrupt that needs to clear MFP edge detection first. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - '#interrupt-cells' + - compatible + - reg + - interrupt-controller + +additionalProperties: false + +examples: + - | + interrupt-controller@d4282000 { + compatible = "mrvl,mmp2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>; + mrvl,intc-nr-irqs = <64>; + }; + + interrupt-controller@d4282150 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <4>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x150 0x4>, <0x168 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + - | + interrupt-controller@fed20204 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xfed20204 0x04>, + <0xfed20214 0x04>; + }; + +...
Convert the mrvl,intc binding to DT schema format using json-schema. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- .../interrupt-controller/mrvl,intc.txt | 64 -------- .../interrupt-controller/mrvl,intc.yaml | 144 ++++++++++++++++++ 2 files changed, 144 insertions(+), 64 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml