diff mbox series

[1/8] dt-bindings: interconnect: Add bindings for imx8m noc

Message ID b7a93b75a3ea57aadeeda766a0b729a4bc97ccc9.1585188174.git.leonard.crestez@nxp.com (mailing list archive)
State Not Applicable, archived
Headers show
Series interconnect: Add imx support via devfreq | expand

Commit Message

Leonard Crestez March 26, 2020, 2:16 a.m. UTC
Add initial dt bindings for the interconnects inside i.MX chips.
Multiple external IPs are involved but SOC integration means the
software controllable interfaces are very similar.

Main NOC node acts as interconnect provider if #interconnect-cells is
present. Currently there is a single imx interconnect provider for the
whole SOC.

Other pieces of scalable interconnects can be present, each with their
own OPP table.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 .../bindings/interconnect/fsl,imx8m-noc.yaml  | 138 ++++++++++++++++++
 1 file changed, 138 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml

Comments

Rob Herring March 30, 2020, 3:39 p.m. UTC | #1
On Thu, 26 Mar 2020 04:16:13 +0200, Leonard Crestez wrote:
> Add initial dt bindings for the interconnects inside i.MX chips.
> Multiple external IPs are involved but SOC integration means the
> software controllable interfaces are very similar.
> 
> Main NOC node acts as interconnect provider if #interconnect-cells is
> present. Currently there is a single imx interconnect provider for the
> whole SOC.
> 
> Other pieces of scalable interconnects can be present, each with their
> own OPP table.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> ---
>  .../bindings/interconnect/fsl,imx8m-noc.yaml  | 138 ++++++++++++++++++
>  1 file changed, 138 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml:  while parsing a block mapping
  in "<unicode string>", line 4, column 1
did not find expected key
  in "<unicode string>", line 79, column 9
Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
Makefile:1262: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2

See https://patchwork.ozlabs.org/patch/1261720

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
new file mode 100644
index 000000000000..6c192f1c0edd
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
@@ -0,0 +1,138 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/fsl,imx8m-noc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic i.MX bus frequency device
+
+maintainers:
+  - Leonard Crestez <leonard.crestez@nxp.com>
+
+description: |
+  The i.MX SoC family has multiple buses for which clock frequency (and
+  sometimes voltage) can be adjusted.
+
+  Some of those buses expose register areas mentioned in the memory maps as GPV
+  ("Global Programmers View") but not all. Access to this area might be denied
+  for normal (non-secure) world.
+
+  The buses are based on externally licensed IPs such as ARM NIC-301 and
+  Arteris FlexNOC but DT bindings are specific to the integration of these bus
+  interconnect IPs into imx SOCs.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - fsl,imx8mn-nic
+          - fsl,imx8mm-nic
+          - fsl,imx8mq-nic
+        - const: fsl,imx8m-nic
+      - items:
+        - enum:
+          - fsl,imx8mn-noc
+          - fsl,imx8mm-noc
+          - fsl,imx8mq-noc
+        - const: fsl,imx8m-noc
+      - const: fsl, imx8m-nic
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table: true
+
+  fsl,ddrc:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description:
+      Phandle to DDR Controller.
+
+  '#interconnect-cells':
+    description:
+      If specified then also act as an interconnect provider. Should only be
+      set once per soc on the main noc.
+    const: 1
+
+required:
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/interconnect/imx8mm.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+noc: interconnect@32700000 {
+        compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
+        reg = <0x32700000 0x100000>;
+        clocks = <&clk IMX8MM_CLK_NOC>;
+        #interconnect-cells = <1>;
+
+        /* Used to make requests for DEV_PM_QOS_MIN_FREQUENCY: */
+        fsl,scalable-node-ids = <IMX8MM_ICN_NOC>,
+                                <IMX8MM_ICN_MIPI>,
+                                <IMX8MM_ICS_DRAM>;
+        fsl,scalable-nodes = <&noc>,
+                             <&pl301_mipi>,
+                             <&ddrc>;
+
+        /* For passive governor: */
+        devfreq = <&ddrc>;
+
+        operating-points-v2 = <&noc_opp_table>;
+        noc_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-133M {
+                        opp-hz = /bits/ 64 <133333333>;
+                };
+                opp-800M {
+                        opp-hz = /bits/ 64 <800000000>;
+                };
+        };
+};
+
+pl301_mipi: interconnect@32500000 {
+        compatible = "fsl,imx8m-nic";
+        reg = <0x32500000 0x100000>;
+        clocks = <&clk IMX8MM_CLK_DISP_AXI>;
+        operating-points-v2 = <&pl301_mipi_opp_table>;
+
+        pl301_mipi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200M {
+                        opp-hz = /bits/ 64 <200000000>;
+                };
+                opp-500M {
+                        opp-hz = /bits/ 64 <500000000>;
+                };
+        };
+};
+
+ddrc: memory-controller@3d400000 {
+        compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+        reg = <0x3d400000 0x400000>;
+        glock-names = "core", "pll", "alt", "apb";
+        clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+                 <&clk IMX8MM_DRAM_PLL>,
+                 <&clk IMX8MM_CLK_DRAM_ALT>,
+                 <&clk IMX8MM_CLK_DRAM_APB>;
+        /* For ondemand governor: */
+        devfreq-events = <&ddr_pmu>;
+};
+
+ddr_pmu: ddr-pmu@3d800000 {
+        compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
+        reg = <0x3d800000 0x400000>;
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+};