| Message ID | 20200405232318.26833-5-laurent.pinchart+renesas@ideasonboard.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | dt-bindings: display: bridge: Convert bindings used by R-Car DU to YAML | expand |
On Mon, Apr 06, 2020 at 02:23:18AM +0300, Laurent Pinchart wrote: > Convert the Renesas R-Car LVDS encoder text binding to YAML. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Maxime
Hi Laurent, On Mon, Apr 6, 2020 at 1:24 AM Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> wrote: > Convert the Renesas R-Car LVDS encoder text binding to YAML. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Thanks for your patch! > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml > @@ -0,0 +1,248 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/renesas,lvds.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Renesas R-Car LVDS Encoder > + > +maintainers: > + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > + > +description: | > + These DT bindings describe the LVDS encoder embedded in the Renesas R-Car > + Gen2, R-Car Gen3 and RZ/G SoCs. RZ/G1 and RZ/G2 (no idea what'll RZ/G3 will bring ;-) > + > +properties: > + compatible: > + enum: > + - renesas,r8a7743-lvds # for R8A7743 (RZ/G1M) compatible LVDS encoders > + - renesas,r8a7744-lvds # for R8A7744 (RZ/G1N) compatible LVDS encoders > + - renesas,r8a774a1-lvds # for R8A774A1 (RZ/G2M) compatible LVDS encoders > + - renesas,r8a774b1-lvds # for R8A774B1 (RZ/G2N) compatible LVDS encoders > + - renesas,r8a774c0-lvds # for R8A774C0 (RZ/G2E) compatible LVDS encoders > + - renesas,r8a7790-lvds # for R8A7790 (R-Car H2) compatible LVDS encoders > + - renesas,r8a7791-lvds # for R8A7791 (R-Car M2-W) compatible LVDS encoders > + - renesas,r8a7793-lvds # for R8A7793 (R-Car M2-N) compatible LVDS encoders > + - renesas,r8a7795-lvds # for R8A7795 (R-Car H3) compatible LVDS encoders > + - renesas,r8a7796-lvds # for R8A7796 (R-Car M3-W) compatible LVDS encoders R8A77960 (I know you don't have support for R8A77961 yet ;-) > + - renesas,r8a77965-lvds # for R8A77965 (R-Car M3-N) compatible LVDS encoders > + - renesas,r8a77970-lvds # for R8A77970 (R-Car V3M) compatible LVDS encoders > + - renesas,r8a77980-lvds # for R8A77980 (R-Car V3H) compatible LVDS encoders > + - renesas,r8a77990-lvds # for R8A77990 (R-Car E3) compatible LVDS encoders > + - renesas,r8a77995-lvds # for R8A77995 (R-Car D3) compatible LVDS encoders Wouldn't it be sufficient to just have the SoC name (e.g. "R-Car D3") in the comments? > +if: > + properties: > + compatible: > + enum: > + - renesas,r8a774c0-lvds > + - renesas,r8a77990-lvds > + - renesas,r8a77995-lvds > +then: > + properties: > + clocks: > + minItems: 1 > + maxItems: 4 > + items: > + - description: Functional clock > + - description: EXTAL input clock > + - description: DU_DOTCLKIN0 input clock > + - description: DU_DOTCLKIN1 input clock > + > + clock-names: > + minItems: 1 > + maxItems: 4 > + items: > + - const: fck > + # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. > + # These clocks are optional. > + - enum: > + - extal > + - dclkin.0 > + - dclkin.1 > + - enum: > + - extal > + - dclkin.0 > + - dclkin.1 > + - enum: > + - extal > + - dclkin.0 > + - dclkin.1 Can the duplication of the last 3 entries be avoided? Perhaps like in Documentation/devicetree/bindings/serial/renesas,scif.yaml? > +examples: > + - | > + #include <dt-bindings/clock/renesas-cpg-mssr.h> > + #include <dt-bindings/power/r8a7795-sysc.h> > + > + lvds@feb90000 { > + compatible = "renesas,r8a7795-lvds"; > + reg = <0 0xfeb90000 0 0x14>; Examples are built with #{address,size}-cells = <1>. > + lvds0: lvds@feb90000 { > + compatible = "renesas,r8a77990-lvds"; > + reg = <0 0xfeb90000 0 0x20>; Likewise. > + lvds1: lvds@feb90100 { > + compatible = "renesas,r8a77990-lvds"; > + reg = <0 0xfeb90100 0 0x20>; Likewise. Gr{oetje,eeting}s, Geert
Hi Geert, On Mon, Apr 06, 2020 at 10:47:37AM +0200, Geert Uytterhoeven wrote: > On Mon, Apr 6, 2020 at 1:24 AM Laurent Pinchart wrote: > > Convert the Renesas R-Car LVDS encoder text binding to YAML. > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > > Thanks for your patch! > > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml > > @@ -0,0 +1,248 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/bridge/renesas,lvds.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Renesas R-Car LVDS Encoder > > + > > +maintainers: > > + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > > + > > +description: | > > + These DT bindings describe the LVDS encoder embedded in the Renesas R-Car > > + Gen2, R-Car Gen3 and RZ/G SoCs. > > RZ/G1 and RZ/G2 (no idea what'll RZ/G3 will bring ;-) Fixed. > > + > > +properties: > > + compatible: > > + enum: > > + - renesas,r8a7743-lvds # for R8A7743 (RZ/G1M) compatible LVDS encoders > > + - renesas,r8a7744-lvds # for R8A7744 (RZ/G1N) compatible LVDS encoders > > + - renesas,r8a774a1-lvds # for R8A774A1 (RZ/G2M) compatible LVDS encoders > > + - renesas,r8a774b1-lvds # for R8A774B1 (RZ/G2N) compatible LVDS encoders > > + - renesas,r8a774c0-lvds # for R8A774C0 (RZ/G2E) compatible LVDS encoders > > + - renesas,r8a7790-lvds # for R8A7790 (R-Car H2) compatible LVDS encoders > > + - renesas,r8a7791-lvds # for R8A7791 (R-Car M2-W) compatible LVDS encoders > > + - renesas,r8a7793-lvds # for R8A7793 (R-Car M2-N) compatible LVDS encoders > > + - renesas,r8a7795-lvds # for R8A7795 (R-Car H3) compatible LVDS encoders > > + - renesas,r8a7796-lvds # for R8A7796 (R-Car M3-W) compatible LVDS encoders > > R8A77960 (I know you don't have support for R8A77961 yet ;-) > > > + - renesas,r8a77965-lvds # for R8A77965 (R-Car M3-N) compatible LVDS encoders > > + - renesas,r8a77970-lvds # for R8A77970 (R-Car V3M) compatible LVDS encoders > > + - renesas,r8a77980-lvds # for R8A77980 (R-Car V3H) compatible LVDS encoders > > + - renesas,r8a77990-lvds # for R8A77990 (R-Car E3) compatible LVDS encoders > > + - renesas,r8a77995-lvds # for R8A77995 (R-Car D3) compatible LVDS encoders > > Wouldn't it be sufficient to just have the SoC name (e.g. "R-Car D3") in > the comments? Good idea. I've thus dropped R8A7796(0) :-) > > +if: > > + properties: > > + compatible: > > + enum: > > + - renesas,r8a774c0-lvds > > + - renesas,r8a77990-lvds > > + - renesas,r8a77995-lvds > > +then: > > + properties: > > + clocks: > > + minItems: 1 > > + maxItems: 4 > > + items: > > + - description: Functional clock > > + - description: EXTAL input clock > > + - description: DU_DOTCLKIN0 input clock > > + - description: DU_DOTCLKIN1 input clock > > + > > + clock-names: > > + minItems: 1 > > + maxItems: 4 > > + items: > > + - const: fck > > + # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. > > + # These clocks are optional. > > + - enum: > > + - extal > > + - dclkin.0 > > + - dclkin.1 > > + - enum: > > + - extal > > + - dclkin.0 > > + - dclkin.1 > > + - enum: > > + - extal > > + - dclkin.0 > > + - dclkin.1 > > Can the duplication of the last 3 entries be avoided? > Perhaps like in > Documentation/devicetree/bindings/serial/renesas,scif.yaml? I'd love to, if you can tell me how to make sure the fck entry is mandatory. The following minItems: 1 maxItems: 4 items: enum: - fck - extal - dclkin.0 - dclkin.1 passes the checks, but would accept clock-names = "extal"; which is not valid. Your Documentation/devicetree/bindings/serial/renesas,scif.yaml bindings suffer from the same problem :-) > > +examples: > > + - | > > + #include <dt-bindings/clock/renesas-cpg-mssr.h> > > + #include <dt-bindings/power/r8a7795-sysc.h> > > + > > + lvds@feb90000 { > > + compatible = "renesas,r8a7795-lvds"; > > + reg = <0 0xfeb90000 0 0x14>; > > Examples are built with #{address,size}-cells = <1>. Are they ? I don't get any failure from make dt_binding_check. > > + lvds0: lvds@feb90000 { > > + compatible = "renesas,r8a77990-lvds"; > > + reg = <0 0xfeb90000 0 0x20>; > > Likewise. > > > + lvds1: lvds@feb90100 { > > + compatible = "renesas,r8a77990-lvds"; > > + reg = <0 0xfeb90100 0 0x20>; > > Likewise.
Hi Laurent, On Mon, Apr 6, 2020 at 1:09 PM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > On Mon, Apr 06, 2020 at 10:47:37AM +0200, Geert Uytterhoeven wrote: > > On Mon, Apr 6, 2020 at 1:24 AM Laurent Pinchart wrote: > > > Convert the Renesas R-Car LVDS encoder text binding to YAML. > > > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > > > +if: > > > + properties: > > > + compatible: > > > + enum: > > > + - renesas,r8a774c0-lvds > > > + - renesas,r8a77990-lvds > > > + - renesas,r8a77995-lvds > > > +then: > > > + properties: > > > + clocks: > > > + minItems: 1 > > > + maxItems: 4 > > > + items: > > > + - description: Functional clock > > > + - description: EXTAL input clock > > > + - description: DU_DOTCLKIN0 input clock > > > + - description: DU_DOTCLKIN1 input clock > > > + > > > + clock-names: > > > + minItems: 1 > > > + maxItems: 4 > > > + items: > > > + - const: fck > > > + # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. > > > + # These clocks are optional. > > > + - enum: > > > + - extal > > > + - dclkin.0 > > > + - dclkin.1 > > > + - enum: > > > + - extal > > > + - dclkin.0 > > > + - dclkin.1 > > > + - enum: > > > + - extal > > > + - dclkin.0 > > > + - dclkin.1 > > > > Can the duplication of the last 3 entries be avoided? > > Perhaps like in > > Documentation/devicetree/bindings/serial/renesas,scif.yaml? > > I'd love to, if you can tell me how to make sure the fck entry is > mandatory. The following > > minItems: 1 > maxItems: 4 > items: > enum: > - fck > - extal > - dclkin.0 > - dclkin.1 > > passes the checks, but would accept > > clock-names = "extal"; > > which is not valid. Your > Documentation/devicetree/bindings/serial/renesas,scif.yaml bindings > suffer from the same problem :-) Hmm.... > > > +examples: > > > + - | > > > + #include <dt-bindings/clock/renesas-cpg-mssr.h> > > > + #include <dt-bindings/power/r8a7795-sysc.h> > > > + > > > + lvds@feb90000 { > > > + compatible = "renesas,r8a7795-lvds"; > > > + reg = <0 0xfeb90000 0 0x14>; > > > > Examples are built with #{address,size}-cells = <1>. > > Are they ? I don't get any failure from make dt_binding_check. Hmm... And you do have "reg: maxItems: 1"... Gr{oetje,eeting}s, Geert
On Mon, Apr 6, 2020 at 5:40 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > Hi Laurent, > > On Mon, Apr 6, 2020 at 1:09 PM Laurent Pinchart > <laurent.pinchart@ideasonboard.com> wrote: > > On Mon, Apr 06, 2020 at 10:47:37AM +0200, Geert Uytterhoeven wrote: > > > On Mon, Apr 6, 2020 at 1:24 AM Laurent Pinchart wrote: > > > > Convert the Renesas R-Car LVDS encoder text binding to YAML. > > > > > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > > > > > +if: > > > > + properties: > > > > + compatible: > > > > + enum: > > > > + - renesas,r8a774c0-lvds > > > > + - renesas,r8a77990-lvds > > > > + - renesas,r8a77995-lvds > > > > +then: > > > > + properties: > > > > + clocks: > > > > + minItems: 1 > > > > + maxItems: 4 > > > > + items: > > > > + - description: Functional clock > > > > + - description: EXTAL input clock > > > > + - description: DU_DOTCLKIN0 input clock > > > > + - description: DU_DOTCLKIN1 input clock > > > > + > > > > + clock-names: > > > > + minItems: 1 > > > > + maxItems: 4 > > > > + items: > > > > + - const: fck > > > > + # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. > > > > + # These clocks are optional. > > > > + - enum: > > > > + - extal > > > > + - dclkin.0 > > > > + - dclkin.1 > > > > + - enum: > > > > + - extal > > > > + - dclkin.0 > > > > + - dclkin.1 > > > > + - enum: > > > > + - extal > > > > + - dclkin.0 > > > > + - dclkin.1 > > > > > > Can the duplication of the last 3 entries be avoided? > > > Perhaps like in > > > Documentation/devicetree/bindings/serial/renesas,scif.yaml? > > > > I'd love to, if you can tell me how to make sure the fck entry is > > mandatory. The following > > > > minItems: 1 > > maxItems: 4 > > items: > > enum: > > - fck > > - extal > > - dclkin.0 > > - dclkin.1 > > > > passes the checks, but would accept > > > > clock-names = "extal"; > > > > which is not valid. Your > > Documentation/devicetree/bindings/serial/renesas,scif.yaml bindings > > suffer from the same problem :-) > > Hmm.... > > > > > +examples: > > > > + - | > > > > + #include <dt-bindings/clock/renesas-cpg-mssr.h> > > > > + #include <dt-bindings/power/r8a7795-sysc.h> > > > > + > > > > + lvds@feb90000 { > > > > + compatible = "renesas,r8a7795-lvds"; > > > > + reg = <0 0xfeb90000 0 0x14>; > > > > > > Examples are built with #{address,size}-cells = <1>. > > > > Are they ? I don't get any failure from make dt_binding_check. > > Hmm... And you do have "reg: maxItems: 1"... At first glance I was expecting an error too, but there isn't. As far as the schema is concerned, it's valid because it's a single entry (i.e. one entry in <>). And then dtc can only check that reg is a multiple of 2. The size check does work where we have more constraints like I2C. If we enforce bracketing, then we should be able to check these. Otherwise, knowing both the cell sizes and number of entries is a problem. With bracketing, we can split those checks. I'd been thinking checking cell sizes would be easier in dtc (we're already doing that in lots of cases), but thinking about it some more there is a way to do this with schema: if: properties: '#address-cells': const: 2 '#size-cells': const: 2 required: - '#address-cells' - '#size-cells' then: patternProperties: '@': properties: reg: items: minItems: 4 maxItems: 4 required: - reg ...and copy-n-paste for each size combination. I imagine implementing this will result in another set of fixes. Rob
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt deleted file mode 100644 index c62ce2494ed9..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt +++ /dev/null @@ -1,85 +0,0 @@ -Renesas R-Car LVDS Encoder -========================== - -These DT bindings describe the LVDS encoder embedded in the Renesas R-Car -Gen2, R-Car Gen3 and RZ/G SoCs. - -Required properties: - -- compatible : Shall contain one of - - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders - - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders - - "renesas,r8a774a1-lvds" for R8A774A1 (RZ/G2M) compatible LVDS encoders - - "renesas,r8a774b1-lvds" for R8A774B1 (RZ/G2N) compatible LVDS encoders - - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders - - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders - - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders - - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders - - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders - - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders - - "renesas,r8a77965-lvds" for R8A77965 (R-Car M3-N) compatible LVDS encoders - - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders - - "renesas,r8a77980-lvds" for R8A77980 (R-Car V3H) compatible LVDS encoders - - "renesas,r8a77990-lvds" for R8A77990 (R-Car E3) compatible LVDS encoders - - "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders - -- reg: Base address and length for the memory-mapped registers -- clocks: A list of phandles + clock-specifier pairs, one for each entry in - the clock-names property. -- clock-names: Name of the clocks. This property is model-dependent. - - The functional clock, which mandatory for all models, shall be listed - first, and shall be named "fck". - - On R8A77990, R8A77995 and R8A774C0, the LVDS encoder can use the EXTAL or - DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be - named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN - numerical index. - - When the clocks property only contains the functional clock, the - clock-names property may be omitted. -- resets: A phandle + reset specifier for the module reset - -Required nodes: - -The LVDS encoder has two video ports. Their connections are modelled using the -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 corresponds to the parallel RGB input -- Video port 1 corresponds to the LVDS output - -Each port shall have a single endpoint. - -Optional properties: - -- renesas,companion : phandle to the companion LVDS encoder. This property is - mandatory for the first LVDS encoder on D3 and E3 SoCs, and shall point to - the second encoder to be used as a companion in dual-link mode. It shall not - be set for any other LVDS encoder. - - -Example: - - lvds0: lvds@feb90000 { - compatible = "renesas,r8a77990-lvds"; - reg = <0 0xfeb90000 0 0x20>; - clocks = <&cpg CPG_MOD 727>; - power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; - resets = <&cpg 727>; - - renesas,companion = <&lvds1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - lvds0_in: endpoint { - remote-endpoint = <&du_out_lvds0>; - }; - }; - port@1 { - reg = <1>; - lvds0_out: endpoint { - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml new file mode 100644 index 000000000000..47af3dea3075 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml @@ -0,0 +1,248 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car LVDS Encoder + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + These DT bindings describe the LVDS encoder embedded in the Renesas R-Car + Gen2, R-Car Gen3 and RZ/G SoCs. + +properties: + compatible: + enum: + - renesas,r8a7743-lvds # for R8A7743 (RZ/G1M) compatible LVDS encoders + - renesas,r8a7744-lvds # for R8A7744 (RZ/G1N) compatible LVDS encoders + - renesas,r8a774a1-lvds # for R8A774A1 (RZ/G2M) compatible LVDS encoders + - renesas,r8a774b1-lvds # for R8A774B1 (RZ/G2N) compatible LVDS encoders + - renesas,r8a774c0-lvds # for R8A774C0 (RZ/G2E) compatible LVDS encoders + - renesas,r8a7790-lvds # for R8A7790 (R-Car H2) compatible LVDS encoders + - renesas,r8a7791-lvds # for R8A7791 (R-Car M2-W) compatible LVDS encoders + - renesas,r8a7793-lvds # for R8A7793 (R-Car M2-N) compatible LVDS encoders + - renesas,r8a7795-lvds # for R8A7795 (R-Car H3) compatible LVDS encoders + - renesas,r8a7796-lvds # for R8A7796 (R-Car M3-W) compatible LVDS encoders + - renesas,r8a77965-lvds # for R8A77965 (R-Car M3-N) compatible LVDS encoders + - renesas,r8a77970-lvds # for R8A77970 (R-Car V3M) compatible LVDS encoders + - renesas,r8a77980-lvds # for R8A77980 (R-Car V3H) compatible LVDS encoders + - renesas,r8a77990-lvds # for R8A77990 (R-Car E3) compatible LVDS encoders + - renesas,r8a77995-lvds # for R8A77995 (R-Car D3) compatible LVDS encoders + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + resets: + maxItems: 1 + + ports: + type: object + description: | + This device has two video ports. Their connections are modelled using the + OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. + Each port shall have a single endpoint. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + type: object + description: Parallel RGB input port + + port@1: + type: object + description: LVDS output port + + required: + - port@0 + - port@1 + + additionalProperties: false + + power-domains: + maxItems: 1 + + renesas,companion: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the companion LVDS encoder. This property is mandatory + for the first LVDS encoder on D3 and E3 SoCs, and shall point to + the second encoder to be used as a companion in dual-link mode. It + shall not be set for any other LVDS encoder. + +required: + - compatible + - reg + - clocks + - power-domains + - resets + - ports + +if: + properties: + compatible: + enum: + - renesas,r8a774c0-lvds + - renesas,r8a77990-lvds + - renesas,r8a77995-lvds +then: + properties: + clocks: + minItems: 1 + maxItems: 4 + items: + - description: Functional clock + - description: EXTAL input clock + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 1 + maxItems: 4 + items: + - const: fck + # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. + # These clocks are optional. + - enum: + - extal + - dclkin.0 + - dclkin.1 + - enum: + - extal + - dclkin.0 + - dclkin.1 + - enum: + - extal + - dclkin.0 + - dclkin.1 + + required: + - clock-names + +else: + properties: + clocks: + maxItems: 1 + items: + - description: Functional clock + + clock-names: + maxItems: 1 + items: + - const: fck + + renesas,companion: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + lvds@feb90000 { + compatible = "renesas,r8a7795-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 727>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/power/r8a77990-sysc.h> + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a77990-lvds"; + reg = <0 0xfeb90000 0 0x20>; + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 727>; + + renesas,companion = <&lvds1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; + }; + + lvds1: lvds@feb90100 { + compatible = "renesas,r8a77990-lvds"; + reg = <0 0xfeb90100 0 0x20>; + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 726>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + port@1 { + reg = <1>; + lvds1_out: endpoint { + remote-endpoint = <&panel_in2>; + }; + }; + }; + }; + +...
Convert the Renesas R-Car LVDS encoder text binding to YAML. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- .../bindings/display/bridge/renesas,lvds.txt | 85 ------ .../bindings/display/bridge/renesas,lvds.yaml | 248 ++++++++++++++++++ 2 files changed, 248 insertions(+), 85 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml