| Message ID | 20200415141017.384017-1-matthias.blankertz@cetitec.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | ASoC: rsnd: Fixes for multichannel HDMI audio output | expand |
Hi > This fixes two issues in the snd-soc-rcar driver blocking multichannel > HDMI audio out: The parent SSI in a multi-SSI configuration is not > correctly set up and started, and the SSI->HDMI channel mapping is > wrong. > > With these patches, the following device tree snippet can be used on an > r8a7795-based platform (Salvator-X) to enable multichannel HDMI audio on > HDMI0: > > rsnd_port1: port@1 { > rsnd_endpoint1: endpoint { > remote-endpoint = <&dw_hdmi0_snd_in>; > > dai-format = "i2s"; > bitclock-master = <&rsnd_endpoint1>; > frame-master = <&rsnd_endpoint1>; > > playback = <&ssi0 &ssi1 &ssi2 &ssi9>; > }; > }; > > With a capable receiver attached, all of 2ch (stereo), 6ch (e.g. 5.1) > and 8ch audio output should work. > > > Matthias Blankertz (2): > ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode > ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode > > sound/soc/sh/rcar/ssi.c | 8 ++++---- > sound/soc/sh/rcar/ssiu.c | 2 +- > 2 files changed, 5 insertions(+), 5 deletions(-) For all patches Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Thank you for your help !! Best regards --- Kuninori Morimoto
On Wed, 15 Apr 2020 16:10:15 +0200, Matthias Blankertz wrote: > This fixes two issues in the snd-soc-rcar driver blocking multichannel > HDMI audio out: The parent SSI in a multi-SSI configuration is not > correctly set up and started, and the SSI->HDMI channel mapping is > wrong. > > With these patches, the following device tree snippet can be used on an > r8a7795-based platform (Salvator-X) to enable multichannel HDMI audio on > HDMI0: > > [...] Applied, thanks! [1/2] ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode commit: a09fb3f28a60ba3e928a1fa94b0456780800299d [2/2] ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode commit: b94e164759b82d0c1c80d4b1c8f12c9bee83f11d All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
This fixes two issues in the snd-soc-rcar driver blocking multichannel HDMI audio out: The parent SSI in a multi-SSI configuration is not correctly set up and started, and the SSI->HDMI channel mapping is wrong. With these patches, the following device tree snippet can be used on an r8a7795-based platform (Salvator-X) to enable multichannel HDMI audio on HDMI0: rsnd_port1: port@1 { rsnd_endpoint1: endpoint { remote-endpoint = <&dw_hdmi0_snd_in>; dai-format = "i2s"; bitclock-master = <&rsnd_endpoint1>; frame-master = <&rsnd_endpoint1>; playback = <&ssi0 &ssi1 &ssi2 &ssi9>; }; }; With a capable receiver attached, all of 2ch (stereo), 6ch (e.g. 5.1) and 8ch audio output should work. Matthias Blankertz (2): ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode sound/soc/sh/rcar/ssi.c | 8 ++++---- sound/soc/sh/rcar/ssiu.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) base-commit: 7111951b8d4973bda27ff663f2cf18b663d15b48