diff mbox series

[net-next,1/1] net: stmmac: Add option for VLAN filter fail queue enable

Message ID 20200423070026.26200-1-vee.khee.wong@intel.com (mailing list archive)
State New, archived
Headers show
Series [net-next,1/1] net: stmmac: Add option for VLAN filter fail queue enable | expand

Commit Message

Wong, Vee Khee April 23, 2020, 7 a.m. UTC
From: "Chuah, Kim Tatt" <kim.tatt.chuah@intel.com>

Add option in plat_stmmacenet_data struct to enable VLAN Filter Fail
Queuing. This option allows packets that fail VLAN filter to be routed
to a specific Rx queue when Receive All is also set.

When this option is enabled:
- Enable VFFQ only when entering promiscuous mode, because Receive All
  will pass up all rx packets that failed address filtering (similar to
  promiscuous mode).
- VLAN-promiscuous mode is never entered to allow rx packet to fail VLAN
  filters and get routed to selected VFFQ Rx queue.

Reviewed-by: Voon Weifeng <weifeng.voon@intel.com>
Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/common.h      |  2 ++
 drivers/net/ethernet/stmicro/stmmac/dwmac4.h      |  1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 15 +++++++++++++--
 drivers/net/ethernet/stmicro/stmmac/dwmac5.h      |  6 ++++++
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |  3 +++
 include/linux/stmmac.h                            |  2 ++
 6 files changed, 27 insertions(+), 2 deletions(-)

Comments

David Miller April 23, 2020, 10:53 p.m. UTC | #1
From: Wong Vee Khee <vee.khee.wong@intel.com>
Date: Thu, 23 Apr 2020 15:00:26 +0800

> From: "Chuah, Kim Tatt" <kim.tatt.chuah@intel.com>
> 
> Add option in plat_stmmacenet_data struct to enable VLAN Filter Fail
> Queuing. This option allows packets that fail VLAN filter to be routed
> to a specific Rx queue when Receive All is also set.
> 
> When this option is enabled:
> - Enable VFFQ only when entering promiscuous mode, because Receive All
>   will pass up all rx packets that failed address filtering (similar to
>   promiscuous mode).
> - VLAN-promiscuous mode is never entered to allow rx packet to fail VLAN
>   filters and get routed to selected VFFQ Rx queue.
> 
> Reviewed-by: Voon Weifeng <weifeng.voon@intel.com>
> Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com>
> Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com>
> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>

Why would you be setting this with a platform attribute?  Even if the
capability exists, wouldn't you want the user to be able to choose
to opt out?
Wong, Vee Khee May 6, 2020, 3:31 a.m. UTC | #2
> -----Original Message-----
> From: netdev-owner@vger.kernel.org <netdev-owner@vger.kernel.org> On
> Behalf Of David Miller
> Sent: Friday, April 24, 2020 6:53 AM
> To: Wong, Vee Khee <vee.khee.wong@intel.com>
> Cc: peppe.cavallaro@st.com; alexandre.torgue@st.com;
> joabreu@synopsys.com; mcoquelin.stm32@gmail.com;
> netdev@vger.kernel.org; linux-stm32@st-md-mailman.stormreply.com;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Ong,
> Boon Leong <boon.leong.ong@intel.com>; Voon, Weifeng
> <weifeng.voon@intel.com>
> Subject: Re: [PATCH net-next 1/1] net: stmmac: Add option for VLAN filter fail
> queue enable
> 
> From: Wong Vee Khee <vee.khee.wong@intel.com>
> Date: Thu, 23 Apr 2020 15:00:26 +0800
> 
> > From: "Chuah, Kim Tatt" <kim.tatt.chuah@intel.com>
> >
> > Add option in plat_stmmacenet_data struct to enable VLAN Filter Fail
> > Queuing. This option allows packets that fail VLAN filter to be routed
> > to a specific Rx queue when Receive All is also set.
> >
> > When this option is enabled:
> > - Enable VFFQ only when entering promiscuous mode, because Receive All
> >   will pass up all rx packets that failed address filtering (similar to
> >   promiscuous mode).
> > - VLAN-promiscuous mode is never entered to allow rx packet to fail VLAN
> >   filters and get routed to selected VFFQ Rx queue.
> >
> > Reviewed-by: Voon Weifeng <weifeng.voon@intel.com>
> > Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com>
> > Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com>
> > Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
> 
> Why would you be setting this with a platform attribute?  Even if the
> capability exists, wouldn't you want the user to be able to choose to opt out?

Hi Jose/David Miller,

1/ In current implementation, TSN uses VLAN filter that can either accept/reject VLAN-tagged network packets. In some situation, we do not want to drop failed packets, but instead steer the packet to a VLAN Failed Queue Channel.

2/ VLAN Fail Queue Channel will be set to use the RxQ with higheset index as per HW IP configuration because that is the least priority channel.

3/ The way user will enable this feature is through promiscuous mode settings using ifconfig. (e.g. ifconfig enp0s30f4 promisc)

4/ VLAN Filter Fail Packets Queue feature is IP version specific (only applicable to DWMAC5). I would propose we add this under platform data (e.g. dwmac-intel), so that it can be built in according to hardware on a separate patch.

Any thoughts?
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 127f75862962..52e6d1ef7176 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -474,6 +474,8 @@  struct mac_device_info {
 	unsigned int num_vlan;
 	u32 vlan_filter[32];
 	unsigned int promisc;
+	bool vlan_fail_q_en;
+	u8 vlan_fail_q;
 };
 
 struct stmmac_rx_routing {
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
index 61f3249bd724..592b043f9676 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
@@ -76,6 +76,7 @@ 
 #define GMAC_PACKET_FILTER_HPF		BIT(10)
 #define GMAC_PACKET_FILTER_VTFE		BIT(16)
 #define GMAC_PACKET_FILTER_IPFE		BIT(20)
+#define GMAC_PACKET_FILTER_RA		BIT(31)
 
 #define GMAC_MAX_PERFECT_ADDRESSES	128
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index ecd834e0e121..002791b77356 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -618,7 +618,18 @@  static void dwmac4_set_filter(struct mac_device_info *hw,
 	value &= ~GMAC_PACKET_FILTER_PM;
 	value &= ~GMAC_PACKET_FILTER_PR;
 	if (dev->flags & IFF_PROMISC) {
-		value = GMAC_PACKET_FILTER_PR | GMAC_PACKET_FILTER_PCF;
+		/* VLAN Tag Filter Fail Packets Queuing */
+		if (hw->vlan_fail_q_en) {
+			value = readl(ioaddr + GMAC_RXQ_CTRL4);
+			value &= ~GMAC_RXQCTRL_VFFQ_MASK;
+			value |= GMAC_RXQCTRL_VFFQE |
+				 (hw->vlan_fail_q << GMAC_RXQCTRL_VFFQ_SHIFT);
+			writel(value, ioaddr + GMAC_RXQ_CTRL4);
+			value = GMAC_PACKET_FILTER_PR | GMAC_PACKET_FILTER_RA;
+		} else {
+			value = GMAC_PACKET_FILTER_PR | GMAC_PACKET_FILTER_PCF;
+		}
+
 	} else if ((dev->flags & IFF_ALLMULTI) ||
 		   (netdev_mc_count(dev) > hw->multicast_filter_bins)) {
 		/* Pass all multi */
@@ -680,7 +691,7 @@  static void dwmac4_set_filter(struct mac_device_info *hw,
 
 	writel(value, ioaddr + GMAC_PACKET_FILTER);
 
-	if (dev->flags & IFF_PROMISC) {
+	if (dev->flags & IFF_PROMISC && !hw->vlan_fail_q_en) {
 		if (!hw->promisc) {
 			hw->promisc = 1;
 			dwmac4_vlan_promisc_enable(dev, hw);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
index 3e8faa96b4d4..64530deb55ba 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
@@ -92,6 +92,12 @@ 
 #define TCEIE				BIT(0)
 #define DMA_ECC_INT_STATUS		0x00001088
 
+/* EQoS version 5.xx VLAN Tag Filter Fail Packets Queuing */
+#define GMAC_RXQ_CTRL4                 0x00000094
+#define GMAC_RXQCTRL_VFFQ_MASK         GENMASK(19, 17)
+#define GMAC_RXQCTRL_VFFQ_SHIFT                17
+#define GMAC_RXQCTRL_VFFQE             BIT(16)
+
 int dwmac5_safety_feat_config(void __iomem *ioaddr, unsigned int asp);
 int dwmac5_safety_feat_irq_status(struct net_device *ndev,
 		void __iomem *ioaddr, unsigned int asp,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index e6898fd5223f..27d9bf98c908 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4723,6 +4723,9 @@  static int stmmac_hw_init(struct stmmac_priv *priv)
 	if (priv->dma_cap.tsoen)
 		dev_info(priv->device, "TSO supported\n");
 
+	priv->hw->vlan_fail_q_en = priv->plat->vlan_fail_q_en;
+	priv->hw->vlan_fail_q = priv->plat->vlan_fail_q;
+
 	/* Run HW quirks, if any */
 	if (priv->hwif_quirks) {
 		ret = priv->hwif_quirks(priv);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index fbafb353e9be..f4287f363031 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -196,5 +196,7 @@  struct plat_stmmacenet_data {
 	int mac_port_sel_speed;
 	bool en_tx_lpi_clockgating;
 	int has_xgmac;
+	bool vlan_fail_q_en;
+	u8 vlan_fail_q;
 };
 #endif