| Message ID | 20200424130847.328584-4-jiaxun.yang@flygoat.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Lorenzo Pieralisi |
| Headers | show |
| Series | Loongson PCI Generic Driver | expand |
On Fri, Apr 24, 2020 at 8:10 AM Jiaxun Yang <jiaxun.yang@flygoat.com> wrote: > > This controller can be found on Loongson-2K SoC, Loongson-3 > systems with RS780E/LS7A PCH. > > The RS780E part of code was previously located at > arch/mips/pci/ops-loongson3.c and now it can use generic PCI > driver implementation. > > Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> > > -- > v2: > - Clean up according to rob's suggestions > - Claim that it can't work as a module > v3: > - Fix a typo > --- > drivers/pci/controller/Kconfig | 9 + > drivers/pci/controller/Makefile | 1 + > drivers/pci/controller/pci-loongson.c | 257 ++++++++++++++++++++++++++ > 3 files changed, 267 insertions(+) > create mode 100644 drivers/pci/controller/pci-loongson.c > > diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig > index 91bfdb784829..7d7e70402ebd 100644 > --- a/drivers/pci/controller/Kconfig > +++ b/drivers/pci/controller/Kconfig > @@ -258,6 +258,16 @@ config PCI_HYPERV_INTERFACE > The Hyper-V PCI Interface is a helper driver allows other drivers to > have a common interface with the Hyper-V PCI frontend driver. > > +config PCI_LOONGSON > + bool "LOONGSON PCI Controller" > + depends on MACH_LOONGSON64 || COMPILE_TEST > + depends on OF > + depends on PCI_QUIRKS > + default MACH_LOONGSON64 > + help > + Say Y here if you want to enable PCI controller support on > + Loongson systems. > + > source "drivers/pci/controller/dwc/Kconfig" > source "drivers/pci/controller/mobiveil/Kconfig" > source "drivers/pci/controller/cadence/Kconfig" > diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile > index 158c59771824..fbac4b0190a0 100644 > --- a/drivers/pci/controller/Makefile > +++ b/drivers/pci/controller/Makefile > @@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o > obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o > obj-$(CONFIG_VMD) += vmd.o > obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o > +obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o > # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW > obj-y += dwc/ > obj-y += mobiveil/ > diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c > new file mode 100644 > index 000000000000..0bd3b52c14fb > --- /dev/null > +++ b/drivers/pci/controller/pci-loongson.c > @@ -0,0 +1,257 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Loongson PCI Host Controller Driver > + * > + * Copyright (C) 2020 Jiaxun Yang <jiaxun.yang@flygoat.com> > + */ > + > +#include <linux/of_address.h> Don't think this is needed. > +#include <linux/of_pci.h> > +#include <linux/of_platform.h> This should be of_device.h instead. > +#include <linux/pci.h> > +#include <linux/pci_ids.h> > + > +#include "../pci.h" > + > +/* Device IDs */ > +#define DEV_PCIE_PORT_0 0x7a09 > +#define DEV_PCIE_PORT_1 0x7a19 > +#define DEV_PCIE_PORT_2 0x7a29 > + > +#define DEV_LS2K_APB 0x7a02 > +#define DEV_LS7A_CONF 0x7a10 > +#define DEV_LS7A_LPC 0x7a0c > + > +#define FLAG_CFG0 BIT(0) > +#define FLAG_CFG1 BIT(1) > +#define FLAG_DEV_FIX BIT(2) > + > +struct loongson_pci { > + void __iomem *cfg0_base; > + void __iomem *cfg1_base; > + struct platform_device *pdev; > + u32 flags; > +}; > + > +/* Fixup wrong class code in PCIe bridges */ > +static void bridge_class_quirk(struct pci_dev *dev) > +{ > + dev->class = PCI_CLASS_BRIDGE_PCI << 8; > +} > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, > + DEV_PCIE_PORT_0, bridge_class_quirk); > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, > + DEV_PCIE_PORT_1, bridge_class_quirk); > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, > + DEV_PCIE_PORT_2, bridge_class_quirk); > + > +static void system_bus_quirk(struct pci_dev *pdev) > +{ > + u16 tmp; > + > + pdev->mmio_always_on = 1; > + pdev->non_compliant_bars = 1; > + /* Enable MEM & IO Decoding */ > + pci_read_config_word(pdev, PCI_STATUS, &tmp); > + tmp |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY; > + pci_write_config_word(pdev, PCI_STATUS, tmp); > +} > + > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, > + DEV_LS2K_APB, system_bus_quirk); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, > + DEV_LS7A_CONF, system_bus_quirk); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, > + DEV_LS7A_LPC, system_bus_quirk); > + > +static void loongson_mrrs_quirk(struct pci_dev *dev) > +{ > + struct pci_bus *bus = dev->bus; > + struct pci_dev *bridge; > + static const struct pci_device_id bridge_devids[] = { > + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, > + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) }, > + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) }, > + { 0, }, > + }; > + > + > + /* look for the matching bridge */ > + while (!pci_is_root_bus(bus)) { > + bridge = bus->self; > + bus = bus->parent; > + /* > + * Some Loongson PCIE ports has a h/w limitation of > + * 256 bytes maximum read request size. It can't handle > + * anything higher than this. So force this limit on > + * any devices attached under these ports. > + */ > + if (pci_match_id(bridge_devids, bridge)) { > + if (pcie_get_readrq(dev) > 256) { > + dev_info(&dev->dev, "limiting MRRS to 256\n"); > + pcie_set_readrq(dev, 256); > + } > + break; > + } > + } > +} > +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); > + > +static void __iomem *cfg1_map(struct loongson_pci *priv, int bus, int dev, > + int func, int where) > +{ > + unsigned long addroff = 0x0; > + > + if (bus != 0) > + addroff |= BIT(28); /* Type 1 Access */ > + addroff |= (where & 0xff) | ((where & 0xf00) << 16); > + addroff |= (bus << 16) | (dev << 11) | (func << 8); You already had 'devfn', so just pass that in here and use it. > + return priv->cfg1_base + addroff; > +} > + > +static void __iomem *cfg0_map(struct loongson_pci *priv, int bus, int dev, > + int func, int where) > +{ > + unsigned long addroff = 0x0; > + > + if (bus != 0) > + addroff |= BIT(24); /* Type 1 Access */ > + addroff |= (bus << 16) | (dev << 11) | (func << 8) | where; And here. > + return priv->cfg0_base + addroff; > +} > + > +void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devfn, > + int where) > +{ > + unsigned char busnum = bus->number; > + int device = PCI_SLOT(devfn); > + int function = PCI_FUNC(devfn); > + struct pci_host_bridge *bridge = pci_find_host_bridge(bus); > + struct loongson_pci *priv = pci_host_bridge_priv(bridge); > + > + /* > + * Do not read more than one device on the bus other than > + * the host bridge. > + */ > + if (bus->primary != 0 && device > 0 && > + priv->flags & FLAG_DEV_FIX) > + return NULL; > + > + /* CFG0 can only access standard space */ > + if (where < PCI_CFG_SPACE_SIZE && priv->flags & FLAG_CFG0 && > + priv->cfg0_base) > + return cfg0_map(priv, busnum, device, function, where); > + > + /* CFG1 can access exp space */ > + if (where < PCI_CFG_SPACE_EXP_SIZE && priv->flags & FLAG_CFG1 && > + priv->cfg1_base) No need to check both priv->cfg1_base and FLAG_CFG1. I'd drop the flag. > + return cfg1_map(priv, busnum, device, function, where); > + > + return NULL; > +} > + > +static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) > +{ > + int irq; > + u8 val; > + > + irq = of_irq_parse_and_map_pci(dev, slot, pin); > + if (irq > 0) > + return irq; > + > + /* Care i8259 legacy systems */ > + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &val); > + /* 0xff is also invalid */ > + if (val == 0xff) > + return 0; > + > + return val; > +} > + > +/* H/w only accept 32-bit PCI operations */ > +static struct pci_ops loongson_pci_ops = { > + .map_bus = pci_loongson_map_bus, > + .read = pci_generic_config_read32, > + .write = pci_generic_config_write32, > +}; > + > +static const struct of_device_id loongson_pci_of_match[] = { > + { .compatible = "loongson,rs780e-pci", > + .data = (void *)(FLAG_CFG0), }, > + { .compatible = "loongson,ls2k-pci", > + .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, > + { .compatible = "loongson,ls7a-pci", > + .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, > + {} > +}; > + > +static int loongson_pci_probe(struct platform_device *pdev) > +{ > + struct loongson_pci *priv; > + struct device *dev = &pdev->dev; > + struct device_node *node = dev->of_node; > + struct pci_host_bridge *bridge; > + struct resource *regs; > + int err; > + > + if (!node) > + return -ENODEV; > + > + bridge = devm_pci_alloc_host_bridge(dev, sizeof(*priv)); > + if (!bridge) > + return -ENODEV; > + > + priv = pci_host_bridge_priv(bridge); > + priv->pdev = pdev; > + priv->flags = (unsigned long)of_device_get_match_data(dev); > + > + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!regs) { > + dev_err(dev, "missing mem resources for cfg0\n"); > + return -EINVAL; > + } > + > + priv->cfg0_base = devm_pci_remap_cfg_resource(dev, regs); > + if (IS_ERR(priv->cfg0_base)) > + return PTR_ERR(priv->cfg0_base); > + > + /* CFG1 is optional */ > + if (priv->flags & FLAG_CFG1) { > + regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); > + if (!regs) > + dev_info(dev, "missing mem resource for cfg1\n"); > + else { > + priv->cfg1_base = devm_pci_remap_cfg_resource(dev, regs); > + if (IS_ERR(priv->cfg1_base)) > + priv->cfg1_base = NULL; > + } > + } > + > + Drop the extra blank line. > + err = pci_parse_request_of_pci_ranges(dev, &bridge->windows, > + &bridge->dma_ranges, NULL); > + if (err) { > + dev_err(dev, "Failed to get bridge resources\n"); > + return err; > + } > + > + bridge->dev.parent = dev; > + bridge->sysdata = priv; > + bridge->ops = &loongson_pci_ops; > + bridge->map_irq = loongson_map_irq; > + > + err = pci_host_probe(bridge); > + if (err) > + return err; > + > + return 0; > +} > + > +static struct platform_driver loongson_pci_driver = { > + .driver = { > + .name = "loongson-pci", > + .of_match_table = loongson_pci_of_match, > + }, > + .probe = loongson_pci_probe, > +}; > +builtin_platform_driver(loongson_pci_driver); > -- > 2.26.0.rc2 >
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 91bfdb784829..7d7e70402ebd 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -258,6 +258,16 @@ config PCI_HYPERV_INTERFACE The Hyper-V PCI Interface is a helper driver allows other drivers to have a common interface with the Hyper-V PCI frontend driver. +config PCI_LOONGSON + bool "LOONGSON PCI Controller" + depends on MACH_LOONGSON64 || COMPILE_TEST + depends on OF + depends on PCI_QUIRKS + default MACH_LOONGSON64 + help + Say Y here if you want to enable PCI controller support on + Loongson systems. + source "drivers/pci/controller/dwc/Kconfig" source "drivers/pci/controller/mobiveil/Kconfig" source "drivers/pci/controller/cadence/Kconfig" diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile index 158c59771824..fbac4b0190a0 100644 --- a/drivers/pci/controller/Makefile +++ b/drivers/pci/controller/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o obj-$(CONFIG_VMD) += vmd.o obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o +obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW obj-y += dwc/ obj-y += mobiveil/ diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c new file mode 100644 index 000000000000..0bd3b52c14fb --- /dev/null +++ b/drivers/pci/controller/pci-loongson.c @@ -0,0 +1,257 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Loongson PCI Host Controller Driver + * + * Copyright (C) 2020 Jiaxun Yang <jiaxun.yang@flygoat.com> + */ + +#include <linux/of_address.h> +#include <linux/of_pci.h> +#include <linux/of_platform.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> + +#include "../pci.h" + +/* Device IDs */ +#define DEV_PCIE_PORT_0 0x7a09 +#define DEV_PCIE_PORT_1 0x7a19 +#define DEV_PCIE_PORT_2 0x7a29 + +#define DEV_LS2K_APB 0x7a02 +#define DEV_LS7A_CONF 0x7a10 +#define DEV_LS7A_LPC 0x7a0c + +#define FLAG_CFG0 BIT(0) +#define FLAG_CFG1 BIT(1) +#define FLAG_DEV_FIX BIT(2) + +struct loongson_pci { + void __iomem *cfg0_base; + void __iomem *cfg1_base; + struct platform_device *pdev; + u32 flags; +}; + +/* Fixup wrong class code in PCIe bridges */ +static void bridge_class_quirk(struct pci_dev *dev) +{ + dev->class = PCI_CLASS_BRIDGE_PCI << 8; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, bridge_class_quirk); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, bridge_class_quirk); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, bridge_class_quirk); + +static void system_bus_quirk(struct pci_dev *pdev) +{ + u16 tmp; + + pdev->mmio_always_on = 1; + pdev->non_compliant_bars = 1; + /* Enable MEM & IO Decoding */ + pci_read_config_word(pdev, PCI_STATUS, &tmp); + tmp |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY; + pci_write_config_word(pdev, PCI_STATUS, tmp); +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS2K_APB, system_bus_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_CONF, system_bus_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_LPC, system_bus_quirk); + +static void loongson_mrrs_quirk(struct pci_dev *dev) +{ + struct pci_bus *bus = dev->bus; + struct pci_dev *bridge; + static const struct pci_device_id bridge_devids[] = { + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) }, + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) }, + { 0, }, + }; + + + /* look for the matching bridge */ + while (!pci_is_root_bus(bus)) { + bridge = bus->self; + bus = bus->parent; + /* + * Some Loongson PCIE ports has a h/w limitation of + * 256 bytes maximum read request size. It can't handle + * anything higher than this. So force this limit on + * any devices attached under these ports. + */ + if (pci_match_id(bridge_devids, bridge)) { + if (pcie_get_readrq(dev) > 256) { + dev_info(&dev->dev, "limiting MRRS to 256\n"); + pcie_set_readrq(dev, 256); + } + break; + } + } +} +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); + +static void __iomem *cfg1_map(struct loongson_pci *priv, int bus, int dev, + int func, int where) +{ + unsigned long addroff = 0x0; + + if (bus != 0) + addroff |= BIT(28); /* Type 1 Access */ + addroff |= (where & 0xff) | ((where & 0xf00) << 16); + addroff |= (bus << 16) | (dev << 11) | (func << 8); + return priv->cfg1_base + addroff; +} + +static void __iomem *cfg0_map(struct loongson_pci *priv, int bus, int dev, + int func, int where) +{ + unsigned long addroff = 0x0; + + if (bus != 0) + addroff |= BIT(24); /* Type 1 Access */ + addroff |= (bus << 16) | (dev << 11) | (func << 8) | where; + return priv->cfg0_base + addroff; +} + +void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devfn, + int where) +{ + unsigned char busnum = bus->number; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + struct pci_host_bridge *bridge = pci_find_host_bridge(bus); + struct loongson_pci *priv = pci_host_bridge_priv(bridge); + + /* + * Do not read more than one device on the bus other than + * the host bridge. + */ + if (bus->primary != 0 && device > 0 && + priv->flags & FLAG_DEV_FIX) + return NULL; + + /* CFG0 can only access standard space */ + if (where < PCI_CFG_SPACE_SIZE && priv->flags & FLAG_CFG0 && + priv->cfg0_base) + return cfg0_map(priv, busnum, device, function, where); + + /* CFG1 can access exp space */ + if (where < PCI_CFG_SPACE_EXP_SIZE && priv->flags & FLAG_CFG1 && + priv->cfg1_base) + return cfg1_map(priv, busnum, device, function, where); + + return NULL; +} + +static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + u8 val; + + irq = of_irq_parse_and_map_pci(dev, slot, pin); + if (irq > 0) + return irq; + + /* Care i8259 legacy systems */ + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &val); + /* 0xff is also invalid */ + if (val == 0xff) + return 0; + + return val; +} + +/* H/w only accept 32-bit PCI operations */ +static struct pci_ops loongson_pci_ops = { + .map_bus = pci_loongson_map_bus, + .read = pci_generic_config_read32, + .write = pci_generic_config_write32, +}; + +static const struct of_device_id loongson_pci_of_match[] = { + { .compatible = "loongson,rs780e-pci", + .data = (void *)(FLAG_CFG0), }, + { .compatible = "loongson,ls2k-pci", + .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, + { .compatible = "loongson,ls7a-pci", + .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, + {} +}; + +static int loongson_pci_probe(struct platform_device *pdev) +{ + struct loongson_pci *priv; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct pci_host_bridge *bridge; + struct resource *regs; + int err; + + if (!node) + return -ENODEV; + + bridge = devm_pci_alloc_host_bridge(dev, sizeof(*priv)); + if (!bridge) + return -ENODEV; + + priv = pci_host_bridge_priv(bridge); + priv->pdev = pdev; + priv->flags = (unsigned long)of_device_get_match_data(dev); + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(dev, "missing mem resources for cfg0\n"); + return -EINVAL; + } + + priv->cfg0_base = devm_pci_remap_cfg_resource(dev, regs); + if (IS_ERR(priv->cfg0_base)) + return PTR_ERR(priv->cfg0_base); + + /* CFG1 is optional */ + if (priv->flags & FLAG_CFG1) { + regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!regs) + dev_info(dev, "missing mem resource for cfg1\n"); + else { + priv->cfg1_base = devm_pci_remap_cfg_resource(dev, regs); + if (IS_ERR(priv->cfg1_base)) + priv->cfg1_base = NULL; + } + } + + + err = pci_parse_request_of_pci_ranges(dev, &bridge->windows, + &bridge->dma_ranges, NULL); + if (err) { + dev_err(dev, "Failed to get bridge resources\n"); + return err; + } + + bridge->dev.parent = dev; + bridge->sysdata = priv; + bridge->ops = &loongson_pci_ops; + bridge->map_irq = loongson_map_irq; + + err = pci_host_probe(bridge); + if (err) + return err; + + return 0; +} + +static struct platform_driver loongson_pci_driver = { + .driver = { + .name = "loongson-pci", + .of_match_table = loongson_pci_of_match, + }, + .probe = loongson_pci_probe, +}; +builtin_platform_driver(loongson_pci_driver);
This controller can be found on Loongson-2K SoC, Loongson-3 systems with RS780E/LS7A PCH. The RS780E part of code was previously located at arch/mips/pci/ops-loongson3.c and now it can use generic PCI driver implementation. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> -- v2: - Clean up according to rob's suggestions - Claim that it can't work as a module v3: - Fix a typo --- drivers/pci/controller/Kconfig | 9 + drivers/pci/controller/Makefile | 1 + drivers/pci/controller/pci-loongson.c | 257 ++++++++++++++++++++++++++ 3 files changed, 267 insertions(+) create mode 100644 drivers/pci/controller/pci-loongson.c