diff mbox series

[V5,1/2] dt-bindings: firmware: imx: Move system control into dt-binding headfile

Message ID 1587888704-7158-1-git-send-email-Anson.Huang@nxp.com (mailing list archive)
State Not Applicable, archived
Headers show
Series [V5,1/2] dt-bindings: firmware: imx: Move system control into dt-binding headfile | expand

Commit Message

Anson Huang April 26, 2020, 8:11 a.m. UTC
From: Dong Aisheng <aisheng.dong@nxp.com>

i.MX8 SoCs DTS file needs system control macro definitions, so move them
into dt-binding headfile, then include/linux/firmware/imx/types.h can be
removed and those drivers using it should be changed accordingly.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V4:
	- Use another patch for new added system controls and PM clock types.
---
 drivers/firmware/imx/imx-scu.c          |  1 -
 drivers/thermal/imx_sc_thermal.c        |  2 +-
 include/dt-bindings/firmware/imx/rsrc.h | 51 ++++++++++++++++++++++++++
 include/linux/firmware/imx/sci.h        |  1 -
 include/linux/firmware/imx/types.h      | 65 ---------------------------------
 5 files changed, 52 insertions(+), 68 deletions(-)
 delete mode 100644 include/linux/firmware/imx/types.h

Comments

Marco Felsch April 27, 2020, 6:11 a.m. UTC | #1
Hi Anson,

sorry for jumping in..

On 20-04-26 16:11, Anson Huang wrote:
> From: Dong Aisheng <aisheng.dong@nxp.com>
> 
> i.MX8 SoCs DTS file needs system control macro definitions, so move them
> into dt-binding headfile, then include/linux/firmware/imx/types.h can be
> removed and those drivers using it should be changed accordingly.
> 
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> Signed-off-by: Jacky Bai <ping.bai@nxp.com>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> Changes since V4:
> 	- Use another patch for new added system controls and PM clock types.
> ---
>  drivers/firmware/imx/imx-scu.c          |  1 -
>  drivers/thermal/imx_sc_thermal.c        |  2 +-
>  include/dt-bindings/firmware/imx/rsrc.h | 51 ++++++++++++++++++++++++++
>  include/linux/firmware/imx/sci.h        |  1 -
>  include/linux/firmware/imx/types.h      | 65 ---------------------------------
>  5 files changed, 52 insertions(+), 68 deletions(-)
>  delete mode 100644 include/linux/firmware/imx/types.h
> 
> diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c
> index f71eaa5..f3340fa 100644
> --- a/drivers/firmware/imx/imx-scu.c
> +++ b/drivers/firmware/imx/imx-scu.c
> @@ -8,7 +8,6 @@
>   */
>  
>  #include <linux/err.h>
> -#include <linux/firmware/imx/types.h>
>  #include <linux/firmware/imx/ipc.h>
>  #include <linux/firmware/imx/sci.h>
>  #include <linux/interrupt.h>

You don't need this anymore here or was it a needless include?

Regards,
  Marco
Anson Huang April 27, 2020, 6:40 a.m. UTC | #2
Hi, Marco


> Subject: Re: [PATCH V5 1/2] dt-bindings: firmware: imx: Move system control
> into dt-binding headfile
> 
> Hi Anson,
> 
> sorry for jumping in..
> 
> On 20-04-26 16:11, Anson Huang wrote:
> > From: Dong Aisheng <aisheng.dong@nxp.com>
> >
> > i.MX8 SoCs DTS file needs system control macro definitions, so move
> > them into dt-binding headfile, then include/linux/firmware/imx/types.h
> > can be removed and those drivers using it should be changed accordingly.
> >
> > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> > Signed-off-by: Jacky Bai <ping.bai@nxp.com>
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > ---
> > Changes since V4:
> > 	- Use another patch for new added system controls and PM clock types.
> > ---
> >  drivers/firmware/imx/imx-scu.c          |  1 -
> >  drivers/thermal/imx_sc_thermal.c        |  2 +-
> >  include/dt-bindings/firmware/imx/rsrc.h | 51
> ++++++++++++++++++++++++++
> >  include/linux/firmware/imx/sci.h        |  1 -
> >  include/linux/firmware/imx/types.h      | 65 ---------------------------------
> >  5 files changed, 52 insertions(+), 68 deletions(-)  delete mode
> > 100644 include/linux/firmware/imx/types.h
> >
> > diff --git a/drivers/firmware/imx/imx-scu.c
> > b/drivers/firmware/imx/imx-scu.c index f71eaa5..f3340fa 100644
> > --- a/drivers/firmware/imx/imx-scu.c
> > +++ b/drivers/firmware/imx/imx-scu.c
> > @@ -8,7 +8,6 @@
> >   */
> >
> >  #include <linux/err.h>
> > -#include <linux/firmware/imx/types.h>  #include
> > <linux/firmware/imx/ipc.h>  #include <linux/firmware/imx/sci.h>
> > #include <linux/interrupt.h>
> 
> You don't need this anymore here or was it a needless include?

I don't need this anymore, and since it is going to be removed, so this include also needs to be removed.

Thanks,
Anson
Shawn Guo May 13, 2020, 8:20 a.m. UTC | #3
On Sun, Apr 26, 2020 at 04:11:43PM +0800, Anson Huang wrote:
> From: Dong Aisheng <aisheng.dong@nxp.com>
> 
> i.MX8 SoCs DTS file needs system control macro definitions, so move them
> into dt-binding headfile, then include/linux/firmware/imx/types.h can be
> removed and those drivers using it should be changed accordingly.
> 
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> Signed-off-by: Jacky Bai <ping.bai@nxp.com>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Applied both, thanks.
diff mbox series

Patch

diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c
index f71eaa5..f3340fa 100644
--- a/drivers/firmware/imx/imx-scu.c
+++ b/drivers/firmware/imx/imx-scu.c
@@ -8,7 +8,6 @@ 
  */
 
 #include <linux/err.h>
-#include <linux/firmware/imx/types.h>
 #include <linux/firmware/imx/ipc.h>
 #include <linux/firmware/imx/sci.h>
 #include <linux/interrupt.h>
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
index b2b68c9..b01d28e 100644
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -3,9 +3,9 @@ 
  * Copyright 2018-2020 NXP.
  */
 
+#include <dt-bindings/firmware/imx/rsrc.h>
 #include <linux/err.h>
 #include <linux/firmware/imx/sci.h>
-#include <linux/firmware/imx/types.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
diff --git a/include/dt-bindings/firmware/imx/rsrc.h b/include/dt-bindings/firmware/imx/rsrc.h
index 4e61f64..cdcda00 100644
--- a/include/dt-bindings/firmware/imx/rsrc.h
+++ b/include/dt-bindings/firmware/imx/rsrc.h
@@ -547,4 +547,55 @@ 
 #define IMX_SC_R_ATTESTATION		545
 #define IMX_SC_R_LAST			546
 
+/*
+ * Defines for SC CONTROL
+ */
+#define IMX_SC_C_TEMP				0
+#define IMX_SC_C_TEMP_HI			1
+#define IMX_SC_C_TEMP_LOW			2
+#define IMX_SC_C_PXL_LINK_MST1_ADDR		3
+#define IMX_SC_C_PXL_LINK_MST2_ADDR		4
+#define IMX_SC_C_PXL_LINK_MST_ENB		5
+#define IMX_SC_C_PXL_LINK_MST1_ENB		6
+#define IMX_SC_C_PXL_LINK_MST2_ENB		7
+#define IMX_SC_C_PXL_LINK_SLV1_ADDR		8
+#define IMX_SC_C_PXL_LINK_SLV2_ADDR		9
+#define IMX_SC_C_PXL_LINK_MST_VLD		10
+#define IMX_SC_C_PXL_LINK_MST1_VLD		11
+#define IMX_SC_C_PXL_LINK_MST2_VLD		12
+#define IMX_SC_C_SINGLE_MODE			13
+#define IMX_SC_C_ID				14
+#define IMX_SC_C_PXL_CLK_POLARITY		15
+#define IMX_SC_C_LINESTATE			16
+#define IMX_SC_C_PCIE_G_RST			17
+#define IMX_SC_C_PCIE_BUTTON_RST		18
+#define IMX_SC_C_PCIE_PERST			19
+#define IMX_SC_C_PHY_RESET			20
+#define IMX_SC_C_PXL_LINK_RATE_CORRECTION	21
+#define IMX_SC_C_PANIC				22
+#define IMX_SC_C_PRIORITY_GROUP			23
+#define IMX_SC_C_TXCLK				24
+#define IMX_SC_C_CLKDIV				25
+#define IMX_SC_C_DISABLE_50			26
+#define IMX_SC_C_DISABLE_125			27
+#define IMX_SC_C_SEL_125			28
+#define IMX_SC_C_MODE				29
+#define IMX_SC_C_SYNC_CTRL0			30
+#define IMX_SC_C_KACHUNK_CNT			31
+#define IMX_SC_C_KACHUNK_SEL			32
+#define IMX_SC_C_SYNC_CTRL1			33
+#define IMX_SC_C_DPI_RESET			34
+#define IMX_SC_C_MIPI_RESET			35
+#define IMX_SC_C_DUAL_MODE			36
+#define IMX_SC_C_VOLTAGE			37
+#define IMX_SC_C_PXL_LINK_SEL			38
+#define IMX_SC_C_OFS_SEL			39
+#define IMX_SC_C_OFS_AUDIO			40
+#define IMX_SC_C_OFS_PERIPH			41
+#define IMX_SC_C_OFS_IRQ			42
+#define IMX_SC_C_RST0				43
+#define IMX_SC_C_RST1				44
+#define IMX_SC_C_SEL0				45
+#define IMX_SC_C_LAST				46
+
 #endif /* __DT_BINDINGS_RSCRC_IMX_H */
diff --git a/include/linux/firmware/imx/sci.h b/include/linux/firmware/imx/sci.h
index 17ba4e4..3fa418a 100644
--- a/include/linux/firmware/imx/sci.h
+++ b/include/linux/firmware/imx/sci.h
@@ -11,7 +11,6 @@ 
 #define _SC_SCI_H
 
 #include <linux/firmware/imx/ipc.h>
-#include <linux/firmware/imx/types.h>
 
 #include <linux/firmware/imx/svc/misc.h>
 #include <linux/firmware/imx/svc/pm.h>
diff --git a/include/linux/firmware/imx/types.h b/include/linux/firmware/imx/types.h
deleted file mode 100644
index 8082110..0000000
--- a/include/linux/firmware/imx/types.h
+++ /dev/null
@@ -1,65 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2016 Freescale Semiconductor, Inc.
- * Copyright 2017~2018 NXP
- *
- * Header file containing types used across multiple service APIs.
- */
-
-#ifndef _SC_TYPES_H
-#define _SC_TYPES_H
-
-/*
- * This type is used to indicate a control.
- */
-enum imx_sc_ctrl {
-	IMX_SC_C_TEMP = 0,
-	IMX_SC_C_TEMP_HI = 1,
-	IMX_SC_C_TEMP_LOW = 2,
-	IMX_SC_C_PXL_LINK_MST1_ADDR = 3,
-	IMX_SC_C_PXL_LINK_MST2_ADDR = 4,
-	IMX_SC_C_PXL_LINK_MST_ENB = 5,
-	IMX_SC_C_PXL_LINK_MST1_ENB = 6,
-	IMX_SC_C_PXL_LINK_MST2_ENB = 7,
-	IMX_SC_C_PXL_LINK_SLV1_ADDR = 8,
-	IMX_SC_C_PXL_LINK_SLV2_ADDR = 9,
-	IMX_SC_C_PXL_LINK_MST_VLD = 10,
-	IMX_SC_C_PXL_LINK_MST1_VLD = 11,
-	IMX_SC_C_PXL_LINK_MST2_VLD = 12,
-	IMX_SC_C_SINGLE_MODE = 13,
-	IMX_SC_C_ID = 14,
-	IMX_SC_C_PXL_CLK_POLARITY = 15,
-	IMX_SC_C_LINESTATE = 16,
-	IMX_SC_C_PCIE_G_RST = 17,
-	IMX_SC_C_PCIE_BUTTON_RST = 18,
-	IMX_SC_C_PCIE_PERST = 19,
-	IMX_SC_C_PHY_RESET = 20,
-	IMX_SC_C_PXL_LINK_RATE_CORRECTION = 21,
-	IMX_SC_C_PANIC = 22,
-	IMX_SC_C_PRIORITY_GROUP = 23,
-	IMX_SC_C_TXCLK = 24,
-	IMX_SC_C_CLKDIV = 25,
-	IMX_SC_C_DISABLE_50 = 26,
-	IMX_SC_C_DISABLE_125 = 27,
-	IMX_SC_C_SEL_125 = 28,
-	IMX_SC_C_MODE = 29,
-	IMX_SC_C_SYNC_CTRL0 = 30,
-	IMX_SC_C_KACHUNK_CNT = 31,
-	IMX_SC_C_KACHUNK_SEL = 32,
-	IMX_SC_C_SYNC_CTRL1 = 33,
-	IMX_SC_C_DPI_RESET = 34,
-	IMX_SC_C_MIPI_RESET = 35,
-	IMX_SC_C_DUAL_MODE = 36,
-	IMX_SC_C_VOLTAGE = 37,
-	IMX_SC_C_PXL_LINK_SEL = 38,
-	IMX_SC_C_OFS_SEL = 39,
-	IMX_SC_C_OFS_AUDIO = 40,
-	IMX_SC_C_OFS_PERIPH = 41,
-	IMX_SC_C_OFS_IRQ = 42,
-	IMX_SC_C_RST0 = 43,
-	IMX_SC_C_RST1 = 44,
-	IMX_SC_C_SEL0 = 45,
-	IMX_SC_C_LAST
-};
-
-#endif /* _SC_TYPES_H */