| Message ID | 20200324151931.449985-4-lkundrak@v3.sk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm: Add support for Chrontel CH7033 VGA/DVI Encoder | expand |
On Tue, Mar 24, 2020 at 04:19:31PM +0100, Lubomir Rintel wrote: > This is a driver for video encoder with VGA and DVI/HDMI outputs. > > There is no documentation for the chip -- the operation was guessed from > what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names > come from the ch7035 driver in Mediatek's GPL code dump. > > Only bare minimum is implemented -- no fancy stuff, such as scaling. That > would only worsen our misery. We don't load the firmware and we don't need > to even bother enabling the MCU. There are probably no distributable > firmware images anyway. > > Just like the tda998x driver, this one uses the component framework and > adds an encoder on component bind, so that it works with the Armada DRM > driver. Uh, can we instead pls land the patches for armada to switch over to of bridge helpers. Iirc the big hold-up was that with direct bridge usage instead of component framework, the drm driver wouldn't unload. But core pm maintainers fixed device links to include driver unloading, and there was a drm_bridge patch including armada patches to do all that. But somehow it didn't land. Iirc because Russell couldn't test them on upstream somehow. Adding more special cases and bridge drivers that we have to convert isn't going to make this any easier. This entire discussion happened in https://www.spinics.net/lists/dri-devel/msg201927.html Can't find the armada patches real quick, nor the drm_bridge patch. But the core infrastructure hides behind. The core pm change has been added in commit e7dd40105aac9ba051e44ad711123bc53a5e4c71 Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Date: Fri Feb 1 01:59:42 2019 +0100 driver core: Add device link flag DL_FLAG_AUTOPROBE_CONSUMER Thanks, Daniel > > Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60, > with VGA as well as DVI. > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> > > --- > Changes since v3: > - Cosmetic changes; drop ch7033_encoder_destroy() and use > drm_encoder_cleanup() for drm_encoder_funcs.destroy callback > directly. > > Changes since v1: > - Sort the includes > - Drop a useless model id read > - Chain to the bridge-connector instead of dealing with the HPD/EDID > readout machinery ourselves > - Utilize regmap to access the registers > > drivers/gpu/drm/bridge/Kconfig | 10 + > drivers/gpu/drm/bridge/Makefile | 1 + > drivers/gpu/drm/bridge/chrontel-ch7033.c | 669 +++++++++++++++++++++++ > 3 files changed, 680 insertions(+) > create mode 100644 drivers/gpu/drm/bridge/chrontel-ch7033.c > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > index aaed2347ace9d..0ebc72d62a5b2 100644 > --- a/drivers/gpu/drm/bridge/Kconfig > +++ b/drivers/gpu/drm/bridge/Kconfig > @@ -27,6 +27,16 @@ config DRM_CDNS_DSI > Support Cadence DPI to DSI bridge. This is an internal > bridge and is meant to be directly embedded in a SoC. > > +config DRM_CHRONTEL_CH7033 > + tristate "Chrontel CH7033 Video Encoder" > + depends on OF > + select DRM_KMS_HELPER > + help > + Enable support for the Chrontel CH7033 VGA/DVI/HDMI Encoder, as > + found in the Dell Wyse 3020 thin client. > + > + If in doubt, say "N". > + > config DRM_DISPLAY_CONNECTOR > tristate "Display connector support" > depends on OF > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > index 6fb062b5b0f04..a844315feddb4 100644 > --- a/drivers/gpu/drm/bridge/Makefile > +++ b/drivers/gpu/drm/bridge/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o > +obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o > obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o > diff --git a/drivers/gpu/drm/bridge/chrontel-ch7033.c b/drivers/gpu/drm/bridge/chrontel-ch7033.c > new file mode 100644 > index 0000000000000..f5cb2130684f7 > --- /dev/null > +++ b/drivers/gpu/drm/bridge/chrontel-ch7033.c > @@ -0,0 +1,669 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Chrontel CH7033 Video Encoder Driver > + * > + * Copyright (C) 2019,2020 Lubomir Rintel > + */ > + > +#include <linux/component.h> > +#include <linux/gpio/consumer.h> > +#include <linux/module.h> > +#include <linux/regmap.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_bridge.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_of.h> > +#include <drm/drm_print.h> > +#include <drm/drm_probe_helper.h> > + > +/* Page 0, Register 0x07 */ > +enum { > + DRI_PD = BIT(3), > + IO_PD = BIT(5), > +}; > + > +/* Page 0, Register 0x08 */ > +enum { > + DRI_PDDRI = GENMASK(7, 4), > + PDDAC = GENMASK(3, 1), > + PANEN = BIT(0), > +}; > + > +/* Page 0, Register 0x09 */ > +enum { > + DPD = BIT(7), > + GCKOFF = BIT(6), > + TV_BP = BIT(5), > + SCLPD = BIT(4), > + SDPD = BIT(3), > + VGA_PD = BIT(2), > + HDBKPD = BIT(1), > + HDMI_PD = BIT(0), > +}; > + > +/* Page 0, Register 0x0a */ > +enum { > + MEMINIT = BIT(7), > + MEMIDLE = BIT(6), > + MEMPD = BIT(5), > + STOP = BIT(4), > + LVDS_PD = BIT(3), > + HD_DVIB = BIT(2), > + HDCP_PD = BIT(1), > + MCU_PD = BIT(0), > +}; > + > +/* Page 0, Register 0x18 */ > +enum { > + IDF = GENMASK(7, 4), > + INTEN = BIT(3), > + SWAP = GENMASK(2, 0), > +}; > + > +enum { > + BYTE_SWAP_RGB = 0, > + BYTE_SWAP_RBG = 1, > + BYTE_SWAP_GRB = 2, > + BYTE_SWAP_GBR = 3, > + BYTE_SWAP_BRG = 4, > + BYTE_SWAP_BGR = 5, > +}; > + > +/* Page 0, Register 0x19 */ > +enum { > + HPO_I = BIT(5), > + VPO_I = BIT(4), > + DEPO_I = BIT(3), > + CRYS_EN = BIT(2), > + GCLKFREQ = GENMASK(2, 0), > +}; > + > +/* Page 0, Register 0x2e */ > +enum { > + HFLIP = BIT(7), > + VFLIP = BIT(6), > + DEPO_O = BIT(5), > + HPO_O = BIT(4), > + VPO_O = BIT(3), > + TE = GENMASK(2, 0), > +}; > + > +/* Page 0, Register 0x2b */ > +enum { > + SWAPS = GENMASK(7, 4), > + VFMT = GENMASK(3, 0), > +}; > + > +/* Page 0, Register 0x54 */ > +enum { > + COMP_BP = BIT(7), > + DAC_EN_T = BIT(6), > + HWO_HDMI_HI = GENMASK(5, 3), > + HOO_HDMI_HI = GENMASK(2, 0), > +}; > + > +/* Page 0, Register 0x57 */ > +enum { > + FLDSEN = BIT(7), > + VWO_HDMI_HI = GENMASK(5, 3), > + VOO_HDMI_HI = GENMASK(2, 0), > +}; > + > +/* Page 0, Register 0x7e */ > +enum { > + HDMI_LVDS_SEL = BIT(7), > + DE_GEN = BIT(6), > + PWM_INDEX_HI = BIT(5), > + USE_DE = BIT(4), > + R_INT = GENMASK(3, 0), > +}; > + > +/* Page 1, Register 0x07 */ > +enum { > + BPCKSEL = BIT(7), > + DRI_CMFB_EN = BIT(6), > + CEC_PUEN = BIT(5), > + CEC_T = BIT(3), > + CKINV = BIT(2), > + CK_TVINV = BIT(1), > + DRI_CKS2 = BIT(0), > +}; > + > +/* Page 1, Register 0x08 */ > +enum { > + DACG = BIT(6), > + DACKTST = BIT(5), > + DEDGEB = BIT(4), > + SYO = BIT(3), > + DRI_IT_LVDS = GENMASK(2, 1), > + DISPON = BIT(0), > +}; > + > +/* Page 1, Register 0x0c */ > +enum { > + DRI_PLL_CP = GENMASK(7, 6), > + DRI_PLL_DIVSEL = BIT(5), > + DRI_PLL_N1_1 = BIT(4), > + DRI_PLL_N1_0 = BIT(3), > + DRI_PLL_N3_1 = BIT(2), > + DRI_PLL_N3_0 = BIT(1), > + DRI_PLL_CKTSTEN = BIT(0), > +}; > + > +/* Page 1, Register 0x6b */ > +enum { > + VCO3CS = GENMASK(7, 6), > + ICPGBK2_0 = GENMASK(5, 3), > + DRI_VCO357SC = BIT(2), > + PDPLL2 = BIT(1), > + DRI_PD_SER = BIT(0), > +}; > + > +/* Page 1, Register 0x6c */ > +enum { > + PLL2N11 = GENMASK(7, 4), > + PLL2N5_4 = BIT(3), > + PLL2N5_TOP = BIT(2), > + DRI_PLL_PD = BIT(1), > + PD_I2CM = BIT(0), > +}; > + > +/* Page 3, Register 0x28 */ > +enum { > + DIFF_EN = GENMASK(7, 6), > + CORREC_EN = GENMASK(5, 4), > + VGACLK_BP = BIT(3), > + HM_LV_SEL = BIT(2), > + HD_VGA_SEL = BIT(1), > +}; > + > +/* Page 3, Register 0x2a */ > +enum { > + LVDSCLK_BP = BIT(7), > + HDTVCLK_BP = BIT(6), > + HDMICLK_BP = BIT(5), > + HDTV_BP = BIT(4), > + HDMI_BP = BIT(3), > + THRWL = GENMASK(2, 0), > +}; > + > +/* Page 4, Register 0x52 */ > +enum { > + PGM_ARSTB = BIT(7), > + MCU_ARSTB = BIT(6), > + MCU_RETB = BIT(2), > + RESETIB = BIT(1), > + RESETDB = BIT(0), > +}; > + > +struct ch7033_priv { > + struct regmap *regmap; > + struct drm_bridge *next_bridge; > + struct drm_encoder encoder; > + struct drm_bridge bridge; > + struct drm_connector connector; > +}; > + > +#define conn_to_ch7033_priv(x) \ > + container_of(x, struct ch7033_priv, connector) > +#define bridge_to_ch7033_priv(x) \ > + container_of(x, struct ch7033_priv, bridge) > + > + > +static enum drm_connector_status ch7033_connector_detect( > + struct drm_connector *connector, bool force) > +{ > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > + > + return drm_bridge_detect(priv->next_bridge); > +} > + > +static const struct drm_connector_funcs ch7033_connector_funcs = { > + .reset = drm_atomic_helper_connector_reset, > + .fill_modes = drm_helper_probe_single_connector_modes, > + .detect = ch7033_connector_detect, > + .destroy = drm_connector_cleanup, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static int ch7033_connector_get_modes(struct drm_connector *connector) > +{ > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > + struct edid *edid; > + int ret; > + > + edid = drm_bridge_get_edid(priv->next_bridge, connector); > + drm_connector_update_edid_property(connector, edid); > + if (edid) { > + ret = drm_add_edid_modes(connector, edid); > + kfree(edid); > + } else { > + ret = drm_add_modes_noedid(connector, 1920, 1080); > + drm_set_preferred_mode(connector, 1024, 768); > + } > + > + return ret; > +} > + > +static struct drm_encoder *ch7033_connector_best_encoder( > + struct drm_connector *connector) > +{ > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > + > + return priv->bridge.encoder; > +} > + > +static const struct drm_connector_helper_funcs ch7033_connector_helper_funcs = { > + .get_modes = ch7033_connector_get_modes, > + .best_encoder = ch7033_connector_best_encoder, > +}; > + > +static void ch7033_hpd_event(void *arg, enum drm_connector_status status) > +{ > + struct ch7033_priv *priv = arg; > + > + if (priv->bridge.dev) > + drm_helper_hpd_irq_event(priv->connector.dev); > +} > + > +static int ch7033_bridge_attach(struct drm_bridge *bridge, > + enum drm_bridge_attach_flags flags) > +{ > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > + struct drm_connector *connector = &priv->connector; > + int ret; > + > + ret = drm_bridge_attach(bridge->encoder, priv->next_bridge, bridge, > + DRM_BRIDGE_ATTACH_NO_CONNECTOR); > + if (ret) > + return ret; > + > + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > + return 0; > + > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_DETECT) { > + connector->polled = DRM_CONNECTOR_POLL_HPD; > + } else { > + connector->polled = DRM_CONNECTOR_POLL_CONNECT | > + DRM_CONNECTOR_POLL_DISCONNECT; > + } > + > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) { > + drm_bridge_hpd_enable(priv->next_bridge, ch7033_hpd_event, > + priv); > + } > + > + drm_connector_helper_add(connector, > + &ch7033_connector_helper_funcs); > + ret = drm_connector_init_with_ddc(bridge->dev, &priv->connector, > + &ch7033_connector_funcs, > + priv->next_bridge->type, > + priv->next_bridge->ddc); > + if (ret) { > + DRM_ERROR("Failed to initialize connector\n"); > + return ret; > + } > + > + return drm_connector_attach_encoder(&priv->connector, bridge->encoder); > +} > + > +static void ch7033_bridge_detach(struct drm_bridge *bridge) > +{ > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > + > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) > + drm_bridge_hpd_disable(priv->next_bridge); > + drm_connector_cleanup(&priv->connector); > +} > + > +static enum drm_mode_status ch7033_bridge_mode_valid(struct drm_bridge *bridge, > + const struct drm_display_mode *mode) > +{ > + if (mode->clock > 165000) > + return MODE_CLOCK_HIGH; > + if (mode->hdisplay >= 1920) > + return MODE_BAD_HVALUE; > + if (mode->vdisplay >= 1080) > + return MODE_BAD_VVALUE; > + return MODE_OK; > +} > + > +static void ch7033_bridge_disable(struct drm_bridge *bridge) > +{ > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > + > + regmap_write(priv->regmap, 0x03, 0x04); > + regmap_update_bits(priv->regmap, 0x52, RESETDB, 0x00); > +} > + > +static void ch7033_bridge_enable(struct drm_bridge *bridge) > +{ > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > + > + regmap_write(priv->regmap, 0x03, 0x04); > + regmap_update_bits(priv->regmap, 0x52, RESETDB, RESETDB); > +} > + > +static void ch7033_bridge_mode_set(struct drm_bridge *bridge, > + const struct drm_display_mode *mode, > + const struct drm_display_mode *adjusted_mode) > +{ > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > + int hbporch = mode->hsync_start - mode->hdisplay; > + int hsynclen = mode->hsync_end - mode->hsync_start; > + int vbporch = mode->vsync_start - mode->vdisplay; > + int vsynclen = mode->vsync_end - mode->vsync_start; > + > + /* > + * Page 4 > + */ > + regmap_write(priv->regmap, 0x03, 0x04); > + > + /* Turn everything off to set all the registers to their defaults. */ > + regmap_write(priv->regmap, 0x52, 0x00); > + /* Bring I/O block up. */ > + regmap_write(priv->regmap, 0x52, RESETIB); > + > + /* > + * Page 0 > + */ > + regmap_write(priv->regmap, 0x03, 0x00); > + > + /* Bring up parts we need from the power down. */ > + regmap_update_bits(priv->regmap, 0x07, DRI_PD | IO_PD, 0); > + regmap_update_bits(priv->regmap, 0x08, DRI_PDDRI | PDDAC | PANEN, 0); > + regmap_update_bits(priv->regmap, 0x09, DPD | GCKOFF | > + HDMI_PD | VGA_PD, 0); > + regmap_update_bits(priv->regmap, 0x0a, HD_DVIB, 0); > + > + /* Horizontal input timing. */ > + regmap_write(priv->regmap, 0x0b, (mode->htotal >> 8) << 3 | > + (mode->hdisplay >> 8)); > + regmap_write(priv->regmap, 0x0c, mode->hdisplay); > + regmap_write(priv->regmap, 0x0d, mode->htotal); > + regmap_write(priv->regmap, 0x0e, (hsynclen >> 8) << 3 | > + (hbporch >> 8)); > + regmap_write(priv->regmap, 0x0f, hbporch); > + regmap_write(priv->regmap, 0x10, hsynclen); > + > + /* Vertical input timing. */ > + regmap_write(priv->regmap, 0x11, (mode->vtotal >> 8) << 3 | > + (mode->vdisplay >> 8)); > + regmap_write(priv->regmap, 0x12, mode->vdisplay); > + regmap_write(priv->regmap, 0x13, mode->vtotal); > + regmap_write(priv->regmap, 0x14, ((vsynclen >> 8) << 3) | > + (vbporch >> 8)); > + regmap_write(priv->regmap, 0x15, vbporch); > + regmap_write(priv->regmap, 0x16, vsynclen); > + > + /* Input color swap. */ > + regmap_update_bits(priv->regmap, 0x18, SWAP, BYTE_SWAP_BGR); > + > + /* Input clock and sync polarity. */ > + regmap_update_bits(priv->regmap, 0x19, 0x1, mode->clock >> 16); > + regmap_update_bits(priv->regmap, 0x19, HPO_I | VPO_I | GCLKFREQ, > + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_I : 0 | > + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_I : 0 | > + mode->clock >> 16); > + regmap_write(priv->regmap, 0x1a, mode->clock >> 8); > + regmap_write(priv->regmap, 0x1b, mode->clock); > + > + /* Horizontal output timing. */ > + regmap_write(priv->regmap, 0x1f, (mode->htotal >> 8) << 3 | > + (mode->hdisplay >> 8)); > + regmap_write(priv->regmap, 0x20, mode->hdisplay); > + regmap_write(priv->regmap, 0x21, mode->htotal); > + > + /* Vertical output timing. */ > + regmap_write(priv->regmap, 0x25, (mode->vtotal >> 8) << 3 | > + (mode->vdisplay >> 8)); > + regmap_write(priv->regmap, 0x26, mode->vdisplay); > + regmap_write(priv->regmap, 0x27, mode->vtotal); > + > + /* VGA channel bypass */ > + regmap_update_bits(priv->regmap, 0x2b, VFMT, 9); > + > + /* Output sync polarity. */ > + regmap_update_bits(priv->regmap, 0x2e, HPO_O | VPO_O, > + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_O : 0 | > + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_O : 0); > + > + /* HDMI horizontal output timing. */ > + regmap_update_bits(priv->regmap, 0x54, HWO_HDMI_HI | HOO_HDMI_HI, > + (hsynclen >> 8) << 3 | > + (hbporch >> 8)); > + regmap_write(priv->regmap, 0x55, hbporch); > + regmap_write(priv->regmap, 0x56, hsynclen); > + > + /* HDMI vertical output timing. */ > + regmap_update_bits(priv->regmap, 0x57, VWO_HDMI_HI | VOO_HDMI_HI, > + (vsynclen >> 8) << 3 | > + (vbporch >> 8)); > + regmap_write(priv->regmap, 0x58, vbporch); > + regmap_write(priv->regmap, 0x59, vsynclen); > + > + /* Pick HDMI, not LVDS. */ > + regmap_update_bits(priv->regmap, 0x7e, HDMI_LVDS_SEL, HDMI_LVDS_SEL); > + > + /* > + * Page 1 > + */ > + regmap_write(priv->regmap, 0x03, 0x01); > + > + /* No idea what these do, but VGA is wobbly and blinky without them. */ > + regmap_update_bits(priv->regmap, 0x07, CKINV, CKINV); > + regmap_update_bits(priv->regmap, 0x08, DISPON, DISPON); > + > + /* DRI PLL */ > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_DIVSEL, DRI_PLL_DIVSEL); > + if (mode->clock <= 40000) { > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > + DRI_PLL_N1_0 | > + DRI_PLL_N3_1 | > + DRI_PLL_N3_0, > + 0); > + } else if (mode->clock < 80000) { > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > + DRI_PLL_N1_0 | > + DRI_PLL_N3_1 | > + DRI_PLL_N3_0, > + DRI_PLL_N3_0 | > + DRI_PLL_N1_0); > + } else { > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > + DRI_PLL_N1_0 | > + DRI_PLL_N3_1 | > + DRI_PLL_N3_0, > + DRI_PLL_N3_1 | > + DRI_PLL_N1_1); > + } > + > + /* This seems to be color calibration for VGA. */ > + regmap_write(priv->regmap, 0x64, 0x29); /* LSB Blue */ > + regmap_write(priv->regmap, 0x65, 0x29); /* LSB Green */ > + regmap_write(priv->regmap, 0x66, 0x29); /* LSB Red */ > + regmap_write(priv->regmap, 0x67, 0x00); /* MSB Blue */ > + regmap_write(priv->regmap, 0x68, 0x00); /* MSB Green */ > + regmap_write(priv->regmap, 0x69, 0x00); /* MSB Red */ > + > + regmap_update_bits(priv->regmap, 0x6b, DRI_PD_SER, 0x00); > + regmap_update_bits(priv->regmap, 0x6c, DRI_PLL_PD, 0x00); > + > + /* > + * Page 3 > + */ > + regmap_write(priv->regmap, 0x03, 0x03); > + > + /* More bypasses and apparently another HDMI/LVDS selector. */ > + regmap_update_bits(priv->regmap, 0x28, VGACLK_BP | HM_LV_SEL, > + VGACLK_BP | HM_LV_SEL); > + regmap_update_bits(priv->regmap, 0x2a, HDMICLK_BP | HDMI_BP, > + HDMICLK_BP | HDMI_BP); > + > + /* > + * Page 4 > + */ > + regmap_write(priv->regmap, 0x03, 0x04); > + > + /* Output clock. */ > + regmap_write(priv->regmap, 0x10, mode->clock >> 16); > + regmap_write(priv->regmap, 0x11, mode->clock >> 8); > + regmap_write(priv->regmap, 0x12, mode->clock); > +} > + > +static const struct drm_bridge_funcs ch7033_bridge_funcs = { > + .attach = ch7033_bridge_attach, > + .detach = ch7033_bridge_detach, > + .mode_valid = ch7033_bridge_mode_valid, > + .disable = ch7033_bridge_disable, > + .enable = ch7033_bridge_enable, > + .mode_set = ch7033_bridge_mode_set, > +}; > + > +static const struct drm_encoder_funcs ch7033_encoder_funcs = { > + .destroy = drm_encoder_cleanup, > +}; > + > +static int ch7033_bind(struct device *dev, struct device *master, > + void *data) > +{ > + struct drm_device *drm = data; > + struct ch7033_priv *priv = dev_get_drvdata(dev); > + uint32_t crtcs; > + int ret; > + > + crtcs = drm_of_find_possible_crtcs(drm, dev->of_node); > + priv->encoder.possible_crtcs = crtcs; > + > + ret = drm_encoder_init(drm, &priv->encoder, &ch7033_encoder_funcs, > + DRM_MODE_ENCODER_TMDS, NULL); > + if (ret) > + return ret; > + > + ret = drm_bridge_attach(&priv->encoder, &priv->bridge, NULL, 0); > + if (ret) > + drm_encoder_cleanup(&priv->encoder); > + > + return ret; > +} > + > +static void ch7033_unbind(struct device *dev, struct device *master, > + void *data) > +{ > + struct ch7033_priv *priv = dev_get_drvdata(dev); > + > + drm_encoder_cleanup(&priv->encoder); > +} > + > +static const struct regmap_config ch7033_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + .max_register = 0x7f, > +}; > + > +static const struct component_ops ch7033_ops = { > + .bind = ch7033_bind, > + .unbind = ch7033_unbind, > +}; > + > +static int ch7033_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct device *dev = &client->dev; > + struct ch7033_priv *priv; > + unsigned int val; > + int ret; > + > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + dev_set_drvdata(dev, priv); > + > + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, -1, NULL, > + &priv->next_bridge); > + if (ret) > + return ret; > + > + priv->regmap = devm_regmap_init_i2c(client, &ch7033_regmap_config); > + if (IS_ERR(priv->regmap)) { > + dev_err(&client->dev, "regmap init failed\n"); > + return PTR_ERR(priv->regmap); > + } > + > + ret = regmap_read(priv->regmap, 0x00, &val); > + if (ret < 0) { > + dev_err(&client->dev, "error reading the model id: %d\n", ret); > + return ret; > + } > + if ((val & 0xf7) != 0x56) { > + dev_err(&client->dev, "the device is not a ch7033\n"); > + return -ENODEV; > + } > + > + regmap_write(priv->regmap, 0x03, 0x04); > + ret = regmap_read(priv->regmap, 0x51, &val); > + if (ret < 0) { > + dev_err(&client->dev, "error reading the model id: %d\n", ret); > + return ret; > + } > + if ((val & 0x0f) != 3) { > + dev_err(&client->dev, "unknown revision %u\n", val); > + return -ENODEV; > + } > + > + INIT_LIST_HEAD(&priv->bridge.list); > + priv->bridge.funcs = &ch7033_bridge_funcs; > + priv->bridge.of_node = dev->of_node; > + drm_bridge_add(&priv->bridge); > + > + ret = component_add(dev, &ch7033_ops); > + if (ret) { > + drm_bridge_remove(&priv->bridge); > + return ret; > + } > + > + dev_info(dev, "Chrontel CH7033 Video Encoder\n"); > + return 0; > +} > + > +static int ch7033_remove(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + struct ch7033_priv *priv = dev_get_drvdata(dev); > + > + component_del(dev, &ch7033_ops); > + drm_bridge_remove(&priv->bridge); > + > + return 0; > +} > + > +static const struct of_device_id ch7033_dt_ids[] = { > + { .compatible = "chrontel,ch7033", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, ch7033_dt_ids); > + > +static const struct i2c_device_id ch7033_ids[] = { > + { "ch7033", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, ch7033_ids); > + > +static struct i2c_driver ch7033_driver = { > + .probe = ch7033_probe, > + .remove = ch7033_remove, > + .driver = { > + .name = "ch7033", > + .of_match_table = of_match_ptr(ch7033_dt_ids), > + }, > + .id_table = ch7033_ids, > +}; > + > +module_i2c_driver(ch7033_driver); > + > +MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); > +MODULE_DESCRIPTION("Chrontel CH7033 Video Encoder Driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.26.0.rc2 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
Also cc'ing a bunch of the usual suspects interested in bridges (and also panels, since same discussion there I think). -Daniel On Tue, Apr 21, 2020 at 2:54 PM Daniel Vetter <daniel@ffwll.ch> wrote: > > On Tue, Mar 24, 2020 at 04:19:31PM +0100, Lubomir Rintel wrote: > > This is a driver for video encoder with VGA and DVI/HDMI outputs. > > > > There is no documentation for the chip -- the operation was guessed from > > what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names > > come from the ch7035 driver in Mediatek's GPL code dump. > > > > Only bare minimum is implemented -- no fancy stuff, such as scaling. That > > would only worsen our misery. We don't load the firmware and we don't need > > to even bother enabling the MCU. There are probably no distributable > > firmware images anyway. > > > > Just like the tda998x driver, this one uses the component framework and > > adds an encoder on component bind, so that it works with the Armada DRM > > driver. > > Uh, can we instead pls land the patches for armada to switch over to of > bridge helpers. Iirc the big hold-up was that with direct bridge usage > instead of component framework, the drm driver wouldn't unload. But core > pm maintainers fixed device links to include driver unloading, and there > was a drm_bridge patch including armada patches to do all that. > > But somehow it didn't land. Iirc because Russell couldn't test them on > upstream somehow. > > Adding more special cases and bridge drivers that we have to convert isn't > going to make this any easier. > > This entire discussion happened in > > https://www.spinics.net/lists/dri-devel/msg201927.html > > Can't find the armada patches real quick, nor the drm_bridge patch. But > the core infrastructure hides behind. The core pm change has been added in > > commit e7dd40105aac9ba051e44ad711123bc53a5e4c71 > Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > Date: Fri Feb 1 01:59:42 2019 +0100 > > driver core: Add device link flag DL_FLAG_AUTOPROBE_CONSUMER > > Thanks, Daniel > > > > Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60, > > with VGA as well as DVI. > > > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> > > > > --- > > Changes since v3: > > - Cosmetic changes; drop ch7033_encoder_destroy() and use > > drm_encoder_cleanup() for drm_encoder_funcs.destroy callback > > directly. > > > > Changes since v1: > > - Sort the includes > > - Drop a useless model id read > > - Chain to the bridge-connector instead of dealing with the HPD/EDID > > readout machinery ourselves > > - Utilize regmap to access the registers > > > > drivers/gpu/drm/bridge/Kconfig | 10 + > > drivers/gpu/drm/bridge/Makefile | 1 + > > drivers/gpu/drm/bridge/chrontel-ch7033.c | 669 +++++++++++++++++++++++ > > 3 files changed, 680 insertions(+) > > create mode 100644 drivers/gpu/drm/bridge/chrontel-ch7033.c > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > > index aaed2347ace9d..0ebc72d62a5b2 100644 > > --- a/drivers/gpu/drm/bridge/Kconfig > > +++ b/drivers/gpu/drm/bridge/Kconfig > > @@ -27,6 +27,16 @@ config DRM_CDNS_DSI > > Support Cadence DPI to DSI bridge. This is an internal > > bridge and is meant to be directly embedded in a SoC. > > > > +config DRM_CHRONTEL_CH7033 > > + tristate "Chrontel CH7033 Video Encoder" > > + depends on OF > > + select DRM_KMS_HELPER > > + help > > + Enable support for the Chrontel CH7033 VGA/DVI/HDMI Encoder, as > > + found in the Dell Wyse 3020 thin client. > > + > > + If in doubt, say "N". > > + > > config DRM_DISPLAY_CONNECTOR > > tristate "Display connector support" > > depends on OF > > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > > index 6fb062b5b0f04..a844315feddb4 100644 > > --- a/drivers/gpu/drm/bridge/Makefile > > +++ b/drivers/gpu/drm/bridge/Makefile > > @@ -1,5 +1,6 @@ > > # SPDX-License-Identifier: GPL-2.0 > > obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o > > +obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > > obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > > obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o > > obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o > > diff --git a/drivers/gpu/drm/bridge/chrontel-ch7033.c b/drivers/gpu/drm/bridge/chrontel-ch7033.c > > new file mode 100644 > > index 0000000000000..f5cb2130684f7 > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/chrontel-ch7033.c > > @@ -0,0 +1,669 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Chrontel CH7033 Video Encoder Driver > > + * > > + * Copyright (C) 2019,2020 Lubomir Rintel > > + */ > > + > > +#include <linux/component.h> > > +#include <linux/gpio/consumer.h> > > +#include <linux/module.h> > > +#include <linux/regmap.h> > > + > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_bridge.h> > > +#include <drm/drm_edid.h> > > +#include <drm/drm_of.h> > > +#include <drm/drm_print.h> > > +#include <drm/drm_probe_helper.h> > > + > > +/* Page 0, Register 0x07 */ > > +enum { > > + DRI_PD = BIT(3), > > + IO_PD = BIT(5), > > +}; > > + > > +/* Page 0, Register 0x08 */ > > +enum { > > + DRI_PDDRI = GENMASK(7, 4), > > + PDDAC = GENMASK(3, 1), > > + PANEN = BIT(0), > > +}; > > + > > +/* Page 0, Register 0x09 */ > > +enum { > > + DPD = BIT(7), > > + GCKOFF = BIT(6), > > + TV_BP = BIT(5), > > + SCLPD = BIT(4), > > + SDPD = BIT(3), > > + VGA_PD = BIT(2), > > + HDBKPD = BIT(1), > > + HDMI_PD = BIT(0), > > +}; > > + > > +/* Page 0, Register 0x0a */ > > +enum { > > + MEMINIT = BIT(7), > > + MEMIDLE = BIT(6), > > + MEMPD = BIT(5), > > + STOP = BIT(4), > > + LVDS_PD = BIT(3), > > + HD_DVIB = BIT(2), > > + HDCP_PD = BIT(1), > > + MCU_PD = BIT(0), > > +}; > > + > > +/* Page 0, Register 0x18 */ > > +enum { > > + IDF = GENMASK(7, 4), > > + INTEN = BIT(3), > > + SWAP = GENMASK(2, 0), > > +}; > > + > > +enum { > > + BYTE_SWAP_RGB = 0, > > + BYTE_SWAP_RBG = 1, > > + BYTE_SWAP_GRB = 2, > > + BYTE_SWAP_GBR = 3, > > + BYTE_SWAP_BRG = 4, > > + BYTE_SWAP_BGR = 5, > > +}; > > + > > +/* Page 0, Register 0x19 */ > > +enum { > > + HPO_I = BIT(5), > > + VPO_I = BIT(4), > > + DEPO_I = BIT(3), > > + CRYS_EN = BIT(2), > > + GCLKFREQ = GENMASK(2, 0), > > +}; > > + > > +/* Page 0, Register 0x2e */ > > +enum { > > + HFLIP = BIT(7), > > + VFLIP = BIT(6), > > + DEPO_O = BIT(5), > > + HPO_O = BIT(4), > > + VPO_O = BIT(3), > > + TE = GENMASK(2, 0), > > +}; > > + > > +/* Page 0, Register 0x2b */ > > +enum { > > + SWAPS = GENMASK(7, 4), > > + VFMT = GENMASK(3, 0), > > +}; > > + > > +/* Page 0, Register 0x54 */ > > +enum { > > + COMP_BP = BIT(7), > > + DAC_EN_T = BIT(6), > > + HWO_HDMI_HI = GENMASK(5, 3), > > + HOO_HDMI_HI = GENMASK(2, 0), > > +}; > > + > > +/* Page 0, Register 0x57 */ > > +enum { > > + FLDSEN = BIT(7), > > + VWO_HDMI_HI = GENMASK(5, 3), > > + VOO_HDMI_HI = GENMASK(2, 0), > > +}; > > + > > +/* Page 0, Register 0x7e */ > > +enum { > > + HDMI_LVDS_SEL = BIT(7), > > + DE_GEN = BIT(6), > > + PWM_INDEX_HI = BIT(5), > > + USE_DE = BIT(4), > > + R_INT = GENMASK(3, 0), > > +}; > > + > > +/* Page 1, Register 0x07 */ > > +enum { > > + BPCKSEL = BIT(7), > > + DRI_CMFB_EN = BIT(6), > > + CEC_PUEN = BIT(5), > > + CEC_T = BIT(3), > > + CKINV = BIT(2), > > + CK_TVINV = BIT(1), > > + DRI_CKS2 = BIT(0), > > +}; > > + > > +/* Page 1, Register 0x08 */ > > +enum { > > + DACG = BIT(6), > > + DACKTST = BIT(5), > > + DEDGEB = BIT(4), > > + SYO = BIT(3), > > + DRI_IT_LVDS = GENMASK(2, 1), > > + DISPON = BIT(0), > > +}; > > + > > +/* Page 1, Register 0x0c */ > > +enum { > > + DRI_PLL_CP = GENMASK(7, 6), > > + DRI_PLL_DIVSEL = BIT(5), > > + DRI_PLL_N1_1 = BIT(4), > > + DRI_PLL_N1_0 = BIT(3), > > + DRI_PLL_N3_1 = BIT(2), > > + DRI_PLL_N3_0 = BIT(1), > > + DRI_PLL_CKTSTEN = BIT(0), > > +}; > > + > > +/* Page 1, Register 0x6b */ > > +enum { > > + VCO3CS = GENMASK(7, 6), > > + ICPGBK2_0 = GENMASK(5, 3), > > + DRI_VCO357SC = BIT(2), > > + PDPLL2 = BIT(1), > > + DRI_PD_SER = BIT(0), > > +}; > > + > > +/* Page 1, Register 0x6c */ > > +enum { > > + PLL2N11 = GENMASK(7, 4), > > + PLL2N5_4 = BIT(3), > > + PLL2N5_TOP = BIT(2), > > + DRI_PLL_PD = BIT(1), > > + PD_I2CM = BIT(0), > > +}; > > + > > +/* Page 3, Register 0x28 */ > > +enum { > > + DIFF_EN = GENMASK(7, 6), > > + CORREC_EN = GENMASK(5, 4), > > + VGACLK_BP = BIT(3), > > + HM_LV_SEL = BIT(2), > > + HD_VGA_SEL = BIT(1), > > +}; > > + > > +/* Page 3, Register 0x2a */ > > +enum { > > + LVDSCLK_BP = BIT(7), > > + HDTVCLK_BP = BIT(6), > > + HDMICLK_BP = BIT(5), > > + HDTV_BP = BIT(4), > > + HDMI_BP = BIT(3), > > + THRWL = GENMASK(2, 0), > > +}; > > + > > +/* Page 4, Register 0x52 */ > > +enum { > > + PGM_ARSTB = BIT(7), > > + MCU_ARSTB = BIT(6), > > + MCU_RETB = BIT(2), > > + RESETIB = BIT(1), > > + RESETDB = BIT(0), > > +}; > > + > > +struct ch7033_priv { > > + struct regmap *regmap; > > + struct drm_bridge *next_bridge; > > + struct drm_encoder encoder; > > + struct drm_bridge bridge; > > + struct drm_connector connector; > > +}; > > + > > +#define conn_to_ch7033_priv(x) \ > > + container_of(x, struct ch7033_priv, connector) > > +#define bridge_to_ch7033_priv(x) \ > > + container_of(x, struct ch7033_priv, bridge) > > + > > + > > +static enum drm_connector_status ch7033_connector_detect( > > + struct drm_connector *connector, bool force) > > +{ > > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > > + > > + return drm_bridge_detect(priv->next_bridge); > > +} > > + > > +static const struct drm_connector_funcs ch7033_connector_funcs = { > > + .reset = drm_atomic_helper_connector_reset, > > + .fill_modes = drm_helper_probe_single_connector_modes, > > + .detect = ch7033_connector_detect, > > + .destroy = drm_connector_cleanup, > > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > +}; > > + > > +static int ch7033_connector_get_modes(struct drm_connector *connector) > > +{ > > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > > + struct edid *edid; > > + int ret; > > + > > + edid = drm_bridge_get_edid(priv->next_bridge, connector); > > + drm_connector_update_edid_property(connector, edid); > > + if (edid) { > > + ret = drm_add_edid_modes(connector, edid); > > + kfree(edid); > > + } else { > > + ret = drm_add_modes_noedid(connector, 1920, 1080); > > + drm_set_preferred_mode(connector, 1024, 768); > > + } > > + > > + return ret; > > +} > > + > > +static struct drm_encoder *ch7033_connector_best_encoder( > > + struct drm_connector *connector) > > +{ > > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > > + > > + return priv->bridge.encoder; > > +} > > + > > +static const struct drm_connector_helper_funcs ch7033_connector_helper_funcs = { > > + .get_modes = ch7033_connector_get_modes, > > + .best_encoder = ch7033_connector_best_encoder, > > +}; > > + > > +static void ch7033_hpd_event(void *arg, enum drm_connector_status status) > > +{ > > + struct ch7033_priv *priv = arg; > > + > > + if (priv->bridge.dev) > > + drm_helper_hpd_irq_event(priv->connector.dev); > > +} > > + > > +static int ch7033_bridge_attach(struct drm_bridge *bridge, > > + enum drm_bridge_attach_flags flags) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + struct drm_connector *connector = &priv->connector; > > + int ret; > > + > > + ret = drm_bridge_attach(bridge->encoder, priv->next_bridge, bridge, > > + DRM_BRIDGE_ATTACH_NO_CONNECTOR); > > + if (ret) > > + return ret; > > + > > + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > > + return 0; > > + > > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_DETECT) { > > + connector->polled = DRM_CONNECTOR_POLL_HPD; > > + } else { > > + connector->polled = DRM_CONNECTOR_POLL_CONNECT | > > + DRM_CONNECTOR_POLL_DISCONNECT; > > + } > > + > > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) { > > + drm_bridge_hpd_enable(priv->next_bridge, ch7033_hpd_event, > > + priv); > > + } > > + > > + drm_connector_helper_add(connector, > > + &ch7033_connector_helper_funcs); > > + ret = drm_connector_init_with_ddc(bridge->dev, &priv->connector, > > + &ch7033_connector_funcs, > > + priv->next_bridge->type, > > + priv->next_bridge->ddc); > > + if (ret) { > > + DRM_ERROR("Failed to initialize connector\n"); > > + return ret; > > + } > > + > > + return drm_connector_attach_encoder(&priv->connector, bridge->encoder); > > +} > > + > > +static void ch7033_bridge_detach(struct drm_bridge *bridge) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + > > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) > > + drm_bridge_hpd_disable(priv->next_bridge); > > + drm_connector_cleanup(&priv->connector); > > +} > > + > > +static enum drm_mode_status ch7033_bridge_mode_valid(struct drm_bridge *bridge, > > + const struct drm_display_mode *mode) > > +{ > > + if (mode->clock > 165000) > > + return MODE_CLOCK_HIGH; > > + if (mode->hdisplay >= 1920) > > + return MODE_BAD_HVALUE; > > + if (mode->vdisplay >= 1080) > > + return MODE_BAD_VVALUE; > > + return MODE_OK; > > +} > > + > > +static void ch7033_bridge_disable(struct drm_bridge *bridge) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + > > + regmap_write(priv->regmap, 0x03, 0x04); > > + regmap_update_bits(priv->regmap, 0x52, RESETDB, 0x00); > > +} > > + > > +static void ch7033_bridge_enable(struct drm_bridge *bridge) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + > > + regmap_write(priv->regmap, 0x03, 0x04); > > + regmap_update_bits(priv->regmap, 0x52, RESETDB, RESETDB); > > +} > > + > > +static void ch7033_bridge_mode_set(struct drm_bridge *bridge, > > + const struct drm_display_mode *mode, > > + const struct drm_display_mode *adjusted_mode) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + int hbporch = mode->hsync_start - mode->hdisplay; > > + int hsynclen = mode->hsync_end - mode->hsync_start; > > + int vbporch = mode->vsync_start - mode->vdisplay; > > + int vsynclen = mode->vsync_end - mode->vsync_start; > > + > > + /* > > + * Page 4 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x04); > > + > > + /* Turn everything off to set all the registers to their defaults. */ > > + regmap_write(priv->regmap, 0x52, 0x00); > > + /* Bring I/O block up. */ > > + regmap_write(priv->regmap, 0x52, RESETIB); > > + > > + /* > > + * Page 0 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x00); > > + > > + /* Bring up parts we need from the power down. */ > > + regmap_update_bits(priv->regmap, 0x07, DRI_PD | IO_PD, 0); > > + regmap_update_bits(priv->regmap, 0x08, DRI_PDDRI | PDDAC | PANEN, 0); > > + regmap_update_bits(priv->regmap, 0x09, DPD | GCKOFF | > > + HDMI_PD | VGA_PD, 0); > > + regmap_update_bits(priv->regmap, 0x0a, HD_DVIB, 0); > > + > > + /* Horizontal input timing. */ > > + regmap_write(priv->regmap, 0x0b, (mode->htotal >> 8) << 3 | > > + (mode->hdisplay >> 8)); > > + regmap_write(priv->regmap, 0x0c, mode->hdisplay); > > + regmap_write(priv->regmap, 0x0d, mode->htotal); > > + regmap_write(priv->regmap, 0x0e, (hsynclen >> 8) << 3 | > > + (hbporch >> 8)); > > + regmap_write(priv->regmap, 0x0f, hbporch); > > + regmap_write(priv->regmap, 0x10, hsynclen); > > + > > + /* Vertical input timing. */ > > + regmap_write(priv->regmap, 0x11, (mode->vtotal >> 8) << 3 | > > + (mode->vdisplay >> 8)); > > + regmap_write(priv->regmap, 0x12, mode->vdisplay); > > + regmap_write(priv->regmap, 0x13, mode->vtotal); > > + regmap_write(priv->regmap, 0x14, ((vsynclen >> 8) << 3) | > > + (vbporch >> 8)); > > + regmap_write(priv->regmap, 0x15, vbporch); > > + regmap_write(priv->regmap, 0x16, vsynclen); > > + > > + /* Input color swap. */ > > + regmap_update_bits(priv->regmap, 0x18, SWAP, BYTE_SWAP_BGR); > > + > > + /* Input clock and sync polarity. */ > > + regmap_update_bits(priv->regmap, 0x19, 0x1, mode->clock >> 16); > > + regmap_update_bits(priv->regmap, 0x19, HPO_I | VPO_I | GCLKFREQ, > > + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_I : 0 | > > + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_I : 0 | > > + mode->clock >> 16); > > + regmap_write(priv->regmap, 0x1a, mode->clock >> 8); > > + regmap_write(priv->regmap, 0x1b, mode->clock); > > + > > + /* Horizontal output timing. */ > > + regmap_write(priv->regmap, 0x1f, (mode->htotal >> 8) << 3 | > > + (mode->hdisplay >> 8)); > > + regmap_write(priv->regmap, 0x20, mode->hdisplay); > > + regmap_write(priv->regmap, 0x21, mode->htotal); > > + > > + /* Vertical output timing. */ > > + regmap_write(priv->regmap, 0x25, (mode->vtotal >> 8) << 3 | > > + (mode->vdisplay >> 8)); > > + regmap_write(priv->regmap, 0x26, mode->vdisplay); > > + regmap_write(priv->regmap, 0x27, mode->vtotal); > > + > > + /* VGA channel bypass */ > > + regmap_update_bits(priv->regmap, 0x2b, VFMT, 9); > > + > > + /* Output sync polarity. */ > > + regmap_update_bits(priv->regmap, 0x2e, HPO_O | VPO_O, > > + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_O : 0 | > > + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_O : 0); > > + > > + /* HDMI horizontal output timing. */ > > + regmap_update_bits(priv->regmap, 0x54, HWO_HDMI_HI | HOO_HDMI_HI, > > + (hsynclen >> 8) << 3 | > > + (hbporch >> 8)); > > + regmap_write(priv->regmap, 0x55, hbporch); > > + regmap_write(priv->regmap, 0x56, hsynclen); > > + > > + /* HDMI vertical output timing. */ > > + regmap_update_bits(priv->regmap, 0x57, VWO_HDMI_HI | VOO_HDMI_HI, > > + (vsynclen >> 8) << 3 | > > + (vbporch >> 8)); > > + regmap_write(priv->regmap, 0x58, vbporch); > > + regmap_write(priv->regmap, 0x59, vsynclen); > > + > > + /* Pick HDMI, not LVDS. */ > > + regmap_update_bits(priv->regmap, 0x7e, HDMI_LVDS_SEL, HDMI_LVDS_SEL); > > + > > + /* > > + * Page 1 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x01); > > + > > + /* No idea what these do, but VGA is wobbly and blinky without them. */ > > + regmap_update_bits(priv->regmap, 0x07, CKINV, CKINV); > > + regmap_update_bits(priv->regmap, 0x08, DISPON, DISPON); > > + > > + /* DRI PLL */ > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_DIVSEL, DRI_PLL_DIVSEL); > > + if (mode->clock <= 40000) { > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > > + DRI_PLL_N1_0 | > > + DRI_PLL_N3_1 | > > + DRI_PLL_N3_0, > > + 0); > > + } else if (mode->clock < 80000) { > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > > + DRI_PLL_N1_0 | > > + DRI_PLL_N3_1 | > > + DRI_PLL_N3_0, > > + DRI_PLL_N3_0 | > > + DRI_PLL_N1_0); > > + } else { > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > > + DRI_PLL_N1_0 | > > + DRI_PLL_N3_1 | > > + DRI_PLL_N3_0, > > + DRI_PLL_N3_1 | > > + DRI_PLL_N1_1); > > + } > > + > > + /* This seems to be color calibration for VGA. */ > > + regmap_write(priv->regmap, 0x64, 0x29); /* LSB Blue */ > > + regmap_write(priv->regmap, 0x65, 0x29); /* LSB Green */ > > + regmap_write(priv->regmap, 0x66, 0x29); /* LSB Red */ > > + regmap_write(priv->regmap, 0x67, 0x00); /* MSB Blue */ > > + regmap_write(priv->regmap, 0x68, 0x00); /* MSB Green */ > > + regmap_write(priv->regmap, 0x69, 0x00); /* MSB Red */ > > + > > + regmap_update_bits(priv->regmap, 0x6b, DRI_PD_SER, 0x00); > > + regmap_update_bits(priv->regmap, 0x6c, DRI_PLL_PD, 0x00); > > + > > + /* > > + * Page 3 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x03); > > + > > + /* More bypasses and apparently another HDMI/LVDS selector. */ > > + regmap_update_bits(priv->regmap, 0x28, VGACLK_BP | HM_LV_SEL, > > + VGACLK_BP | HM_LV_SEL); > > + regmap_update_bits(priv->regmap, 0x2a, HDMICLK_BP | HDMI_BP, > > + HDMICLK_BP | HDMI_BP); > > + > > + /* > > + * Page 4 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x04); > > + > > + /* Output clock. */ > > + regmap_write(priv->regmap, 0x10, mode->clock >> 16); > > + regmap_write(priv->regmap, 0x11, mode->clock >> 8); > > + regmap_write(priv->regmap, 0x12, mode->clock); > > +} > > + > > +static const struct drm_bridge_funcs ch7033_bridge_funcs = { > > + .attach = ch7033_bridge_attach, > > + .detach = ch7033_bridge_detach, > > + .mode_valid = ch7033_bridge_mode_valid, > > + .disable = ch7033_bridge_disable, > > + .enable = ch7033_bridge_enable, > > + .mode_set = ch7033_bridge_mode_set, > > +}; > > + > > +static const struct drm_encoder_funcs ch7033_encoder_funcs = { > > + .destroy = drm_encoder_cleanup, > > +}; > > + > > +static int ch7033_bind(struct device *dev, struct device *master, > > + void *data) > > +{ > > + struct drm_device *drm = data; > > + struct ch7033_priv *priv = dev_get_drvdata(dev); > > + uint32_t crtcs; > > + int ret; > > + > > + crtcs = drm_of_find_possible_crtcs(drm, dev->of_node); > > + priv->encoder.possible_crtcs = crtcs; > > + > > + ret = drm_encoder_init(drm, &priv->encoder, &ch7033_encoder_funcs, > > + DRM_MODE_ENCODER_TMDS, NULL); > > + if (ret) > > + return ret; > > + > > + ret = drm_bridge_attach(&priv->encoder, &priv->bridge, NULL, 0); > > + if (ret) > > + drm_encoder_cleanup(&priv->encoder); > > + > > + return ret; > > +} > > + > > +static void ch7033_unbind(struct device *dev, struct device *master, > > + void *data) > > +{ > > + struct ch7033_priv *priv = dev_get_drvdata(dev); > > + > > + drm_encoder_cleanup(&priv->encoder); > > +} > > + > > +static const struct regmap_config ch7033_regmap_config = { > > + .reg_bits = 8, > > + .val_bits = 8, > > + .max_register = 0x7f, > > +}; > > + > > +static const struct component_ops ch7033_ops = { > > + .bind = ch7033_bind, > > + .unbind = ch7033_unbind, > > +}; > > + > > +static int ch7033_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + struct device *dev = &client->dev; > > + struct ch7033_priv *priv; > > + unsigned int val; > > + int ret; > > + > > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > > + if (!priv) > > + return -ENOMEM; > > + > > + dev_set_drvdata(dev, priv); > > + > > + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, -1, NULL, > > + &priv->next_bridge); > > + if (ret) > > + return ret; > > + > > + priv->regmap = devm_regmap_init_i2c(client, &ch7033_regmap_config); > > + if (IS_ERR(priv->regmap)) { > > + dev_err(&client->dev, "regmap init failed\n"); > > + return PTR_ERR(priv->regmap); > > + } > > + > > + ret = regmap_read(priv->regmap, 0x00, &val); > > + if (ret < 0) { > > + dev_err(&client->dev, "error reading the model id: %d\n", ret); > > + return ret; > > + } > > + if ((val & 0xf7) != 0x56) { > > + dev_err(&client->dev, "the device is not a ch7033\n"); > > + return -ENODEV; > > + } > > + > > + regmap_write(priv->regmap, 0x03, 0x04); > > + ret = regmap_read(priv->regmap, 0x51, &val); > > + if (ret < 0) { > > + dev_err(&client->dev, "error reading the model id: %d\n", ret); > > + return ret; > > + } > > + if ((val & 0x0f) != 3) { > > + dev_err(&client->dev, "unknown revision %u\n", val); > > + return -ENODEV; > > + } > > + > > + INIT_LIST_HEAD(&priv->bridge.list); > > + priv->bridge.funcs = &ch7033_bridge_funcs; > > + priv->bridge.of_node = dev->of_node; > > + drm_bridge_add(&priv->bridge); > > + > > + ret = component_add(dev, &ch7033_ops); > > + if (ret) { > > + drm_bridge_remove(&priv->bridge); > > + return ret; > > + } > > + > > + dev_info(dev, "Chrontel CH7033 Video Encoder\n"); > > + return 0; > > +} > > + > > +static int ch7033_remove(struct i2c_client *client) > > +{ > > + struct device *dev = &client->dev; > > + struct ch7033_priv *priv = dev_get_drvdata(dev); > > + > > + component_del(dev, &ch7033_ops); > > + drm_bridge_remove(&priv->bridge); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id ch7033_dt_ids[] = { > > + { .compatible = "chrontel,ch7033", }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(of, ch7033_dt_ids); > > + > > +static const struct i2c_device_id ch7033_ids[] = { > > + { "ch7033", 0 }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(i2c, ch7033_ids); > > + > > +static struct i2c_driver ch7033_driver = { > > + .probe = ch7033_probe, > > + .remove = ch7033_remove, > > + .driver = { > > + .name = "ch7033", > > + .of_match_table = of_match_ptr(ch7033_dt_ids), > > + }, > > + .id_table = ch7033_ids, > > +}; > > + > > +module_i2c_driver(ch7033_driver); > > + > > +MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); > > +MODULE_DESCRIPTION("Chrontel CH7033 Video Encoder Driver"); > > +MODULE_LICENSE("GPL v2"); > > -- > > 2.26.0.rc2 > > > > _______________________________________________ > > dri-devel mailing list > > dri-devel@lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > > -- > Daniel Vetter > Software Engineer, Intel Corporation > http://blog.ffwll.ch
On Tue, Apr 21, 2020 at 02:54:12PM +0200, Daniel Vetter wrote: > On Tue, Mar 24, 2020 at 04:19:31PM +0100, Lubomir Rintel wrote: > > This is a driver for video encoder with VGA and DVI/HDMI outputs. > > > > There is no documentation for the chip -- the operation was guessed from > > what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names > > come from the ch7035 driver in Mediatek's GPL code dump. > > > > Only bare minimum is implemented -- no fancy stuff, such as scaling. That > > would only worsen our misery. We don't load the firmware and we don't need > > to even bother enabling the MCU. There are probably no distributable > > firmware images anyway. > > > > Just like the tda998x driver, this one uses the component framework and > > adds an encoder on component bind, so that it works with the Armada DRM > > driver. Thank you for your response. > Uh, can we instead pls land the patches for armada to switch over to of > bridge helpers. I honestly don't know -- it's not something I can do anything about. I didn't have any luck getting responses to my other patches for the Armada driver. > Iirc the big hold-up was that with direct bridge usage > instead of component framework, the drm driver wouldn't unload. But core > pm maintainers fixed device links to include driver unloading, and there > was a drm_bridge patch including armada patches to do all that. > > But somehow it didn't land. Iirc because Russell couldn't test them on > upstream somehow. This is what I've found [1]. It seems to include the device links work and switches over the komeda driver, not armada, from components to drm_bridge: [1] https://patchwork.kernel.org/cover/11262351/ I'm wondering if this is the patch set you're referring to? > Adding more special cases and bridge drivers that we have to convert isn't > going to make this any easier. No conversion would be necessary -- merely stripping the component/encoder parts once they're no longer necessary. The driver would still work just fine with drivers that don't utilize the component framework, juts as tda998x does. > This entire discussion happened in > > https://www.spinics.net/lists/dri-devel/msg201927.html > > Can't find the armada patches real quick, nor the drm_bridge patch. But > the core infrastructure hides behind. The core pm change has been added in > > commit e7dd40105aac9ba051e44ad711123bc53a5e4c71 > Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > Date: Fri Feb 1 01:59:42 2019 +0100 > > driver core: Add device link flag DL_FLAG_AUTOPROBE_CONSUMER Thank you Lubo > > Thanks, Daniel > > > > Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60, > > with VGA as well as DVI. > > > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> > > > > --- > > Changes since v3: > > - Cosmetic changes; drop ch7033_encoder_destroy() and use > > drm_encoder_cleanup() for drm_encoder_funcs.destroy callback > > directly. > > > > Changes since v1: > > - Sort the includes > > - Drop a useless model id read > > - Chain to the bridge-connector instead of dealing with the HPD/EDID > > readout machinery ourselves > > - Utilize regmap to access the registers > > > > drivers/gpu/drm/bridge/Kconfig | 10 + > > drivers/gpu/drm/bridge/Makefile | 1 + > > drivers/gpu/drm/bridge/chrontel-ch7033.c | 669 +++++++++++++++++++++++ > > 3 files changed, 680 insertions(+) > > create mode 100644 drivers/gpu/drm/bridge/chrontel-ch7033.c > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > > index aaed2347ace9d..0ebc72d62a5b2 100644 > > --- a/drivers/gpu/drm/bridge/Kconfig > > +++ b/drivers/gpu/drm/bridge/Kconfig > > @@ -27,6 +27,16 @@ config DRM_CDNS_DSI > > Support Cadence DPI to DSI bridge. This is an internal > > bridge and is meant to be directly embedded in a SoC. > > > > +config DRM_CHRONTEL_CH7033 > > + tristate "Chrontel CH7033 Video Encoder" > > + depends on OF > > + select DRM_KMS_HELPER > > + help > > + Enable support for the Chrontel CH7033 VGA/DVI/HDMI Encoder, as > > + found in the Dell Wyse 3020 thin client. > > + > > + If in doubt, say "N". > > + > > config DRM_DISPLAY_CONNECTOR > > tristate "Display connector support" > > depends on OF > > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > > index 6fb062b5b0f04..a844315feddb4 100644 > > --- a/drivers/gpu/drm/bridge/Makefile > > +++ b/drivers/gpu/drm/bridge/Makefile > > @@ -1,5 +1,6 @@ > > # SPDX-License-Identifier: GPL-2.0 > > obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o > > +obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > > obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > > obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o > > obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o > > diff --git a/drivers/gpu/drm/bridge/chrontel-ch7033.c b/drivers/gpu/drm/bridge/chrontel-ch7033.c > > new file mode 100644 > > index 0000000000000..f5cb2130684f7 > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/chrontel-ch7033.c > > @@ -0,0 +1,669 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Chrontel CH7033 Video Encoder Driver > > + * > > + * Copyright (C) 2019,2020 Lubomir Rintel > > + */ > > + > > +#include <linux/component.h> > > +#include <linux/gpio/consumer.h> > > +#include <linux/module.h> > > +#include <linux/regmap.h> > > + > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_bridge.h> > > +#include <drm/drm_edid.h> > > +#include <drm/drm_of.h> > > +#include <drm/drm_print.h> > > +#include <drm/drm_probe_helper.h> > > + > > +/* Page 0, Register 0x07 */ > > +enum { > > + DRI_PD = BIT(3), > > + IO_PD = BIT(5), > > +}; > > + > > +/* Page 0, Register 0x08 */ > > +enum { > > + DRI_PDDRI = GENMASK(7, 4), > > + PDDAC = GENMASK(3, 1), > > + PANEN = BIT(0), > > +}; > > + > > +/* Page 0, Register 0x09 */ > > +enum { > > + DPD = BIT(7), > > + GCKOFF = BIT(6), > > + TV_BP = BIT(5), > > + SCLPD = BIT(4), > > + SDPD = BIT(3), > > + VGA_PD = BIT(2), > > + HDBKPD = BIT(1), > > + HDMI_PD = BIT(0), > > +}; > > + > > +/* Page 0, Register 0x0a */ > > +enum { > > + MEMINIT = BIT(7), > > + MEMIDLE = BIT(6), > > + MEMPD = BIT(5), > > + STOP = BIT(4), > > + LVDS_PD = BIT(3), > > + HD_DVIB = BIT(2), > > + HDCP_PD = BIT(1), > > + MCU_PD = BIT(0), > > +}; > > + > > +/* Page 0, Register 0x18 */ > > +enum { > > + IDF = GENMASK(7, 4), > > + INTEN = BIT(3), > > + SWAP = GENMASK(2, 0), > > +}; > > + > > +enum { > > + BYTE_SWAP_RGB = 0, > > + BYTE_SWAP_RBG = 1, > > + BYTE_SWAP_GRB = 2, > > + BYTE_SWAP_GBR = 3, > > + BYTE_SWAP_BRG = 4, > > + BYTE_SWAP_BGR = 5, > > +}; > > + > > +/* Page 0, Register 0x19 */ > > +enum { > > + HPO_I = BIT(5), > > + VPO_I = BIT(4), > > + DEPO_I = BIT(3), > > + CRYS_EN = BIT(2), > > + GCLKFREQ = GENMASK(2, 0), > > +}; > > + > > +/* Page 0, Register 0x2e */ > > +enum { > > + HFLIP = BIT(7), > > + VFLIP = BIT(6), > > + DEPO_O = BIT(5), > > + HPO_O = BIT(4), > > + VPO_O = BIT(3), > > + TE = GENMASK(2, 0), > > +}; > > + > > +/* Page 0, Register 0x2b */ > > +enum { > > + SWAPS = GENMASK(7, 4), > > + VFMT = GENMASK(3, 0), > > +}; > > + > > +/* Page 0, Register 0x54 */ > > +enum { > > + COMP_BP = BIT(7), > > + DAC_EN_T = BIT(6), > > + HWO_HDMI_HI = GENMASK(5, 3), > > + HOO_HDMI_HI = GENMASK(2, 0), > > +}; > > + > > +/* Page 0, Register 0x57 */ > > +enum { > > + FLDSEN = BIT(7), > > + VWO_HDMI_HI = GENMASK(5, 3), > > + VOO_HDMI_HI = GENMASK(2, 0), > > +}; > > + > > +/* Page 0, Register 0x7e */ > > +enum { > > + HDMI_LVDS_SEL = BIT(7), > > + DE_GEN = BIT(6), > > + PWM_INDEX_HI = BIT(5), > > + USE_DE = BIT(4), > > + R_INT = GENMASK(3, 0), > > +}; > > + > > +/* Page 1, Register 0x07 */ > > +enum { > > + BPCKSEL = BIT(7), > > + DRI_CMFB_EN = BIT(6), > > + CEC_PUEN = BIT(5), > > + CEC_T = BIT(3), > > + CKINV = BIT(2), > > + CK_TVINV = BIT(1), > > + DRI_CKS2 = BIT(0), > > +}; > > + > > +/* Page 1, Register 0x08 */ > > +enum { > > + DACG = BIT(6), > > + DACKTST = BIT(5), > > + DEDGEB = BIT(4), > > + SYO = BIT(3), > > + DRI_IT_LVDS = GENMASK(2, 1), > > + DISPON = BIT(0), > > +}; > > + > > +/* Page 1, Register 0x0c */ > > +enum { > > + DRI_PLL_CP = GENMASK(7, 6), > > + DRI_PLL_DIVSEL = BIT(5), > > + DRI_PLL_N1_1 = BIT(4), > > + DRI_PLL_N1_0 = BIT(3), > > + DRI_PLL_N3_1 = BIT(2), > > + DRI_PLL_N3_0 = BIT(1), > > + DRI_PLL_CKTSTEN = BIT(0), > > +}; > > + > > +/* Page 1, Register 0x6b */ > > +enum { > > + VCO3CS = GENMASK(7, 6), > > + ICPGBK2_0 = GENMASK(5, 3), > > + DRI_VCO357SC = BIT(2), > > + PDPLL2 = BIT(1), > > + DRI_PD_SER = BIT(0), > > +}; > > + > > +/* Page 1, Register 0x6c */ > > +enum { > > + PLL2N11 = GENMASK(7, 4), > > + PLL2N5_4 = BIT(3), > > + PLL2N5_TOP = BIT(2), > > + DRI_PLL_PD = BIT(1), > > + PD_I2CM = BIT(0), > > +}; > > + > > +/* Page 3, Register 0x28 */ > > +enum { > > + DIFF_EN = GENMASK(7, 6), > > + CORREC_EN = GENMASK(5, 4), > > + VGACLK_BP = BIT(3), > > + HM_LV_SEL = BIT(2), > > + HD_VGA_SEL = BIT(1), > > +}; > > + > > +/* Page 3, Register 0x2a */ > > +enum { > > + LVDSCLK_BP = BIT(7), > > + HDTVCLK_BP = BIT(6), > > + HDMICLK_BP = BIT(5), > > + HDTV_BP = BIT(4), > > + HDMI_BP = BIT(3), > > + THRWL = GENMASK(2, 0), > > +}; > > + > > +/* Page 4, Register 0x52 */ > > +enum { > > + PGM_ARSTB = BIT(7), > > + MCU_ARSTB = BIT(6), > > + MCU_RETB = BIT(2), > > + RESETIB = BIT(1), > > + RESETDB = BIT(0), > > +}; > > + > > +struct ch7033_priv { > > + struct regmap *regmap; > > + struct drm_bridge *next_bridge; > > + struct drm_encoder encoder; > > + struct drm_bridge bridge; > > + struct drm_connector connector; > > +}; > > + > > +#define conn_to_ch7033_priv(x) \ > > + container_of(x, struct ch7033_priv, connector) > > +#define bridge_to_ch7033_priv(x) \ > > + container_of(x, struct ch7033_priv, bridge) > > + > > + > > +static enum drm_connector_status ch7033_connector_detect( > > + struct drm_connector *connector, bool force) > > +{ > > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > > + > > + return drm_bridge_detect(priv->next_bridge); > > +} > > + > > +static const struct drm_connector_funcs ch7033_connector_funcs = { > > + .reset = drm_atomic_helper_connector_reset, > > + .fill_modes = drm_helper_probe_single_connector_modes, > > + .detect = ch7033_connector_detect, > > + .destroy = drm_connector_cleanup, > > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > +}; > > + > > +static int ch7033_connector_get_modes(struct drm_connector *connector) > > +{ > > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > > + struct edid *edid; > > + int ret; > > + > > + edid = drm_bridge_get_edid(priv->next_bridge, connector); > > + drm_connector_update_edid_property(connector, edid); > > + if (edid) { > > + ret = drm_add_edid_modes(connector, edid); > > + kfree(edid); > > + } else { > > + ret = drm_add_modes_noedid(connector, 1920, 1080); > > + drm_set_preferred_mode(connector, 1024, 768); > > + } > > + > > + return ret; > > +} > > + > > +static struct drm_encoder *ch7033_connector_best_encoder( > > + struct drm_connector *connector) > > +{ > > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > > + > > + return priv->bridge.encoder; > > +} > > + > > +static const struct drm_connector_helper_funcs ch7033_connector_helper_funcs = { > > + .get_modes = ch7033_connector_get_modes, > > + .best_encoder = ch7033_connector_best_encoder, > > +}; > > + > > +static void ch7033_hpd_event(void *arg, enum drm_connector_status status) > > +{ > > + struct ch7033_priv *priv = arg; > > + > > + if (priv->bridge.dev) > > + drm_helper_hpd_irq_event(priv->connector.dev); > > +} > > + > > +static int ch7033_bridge_attach(struct drm_bridge *bridge, > > + enum drm_bridge_attach_flags flags) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + struct drm_connector *connector = &priv->connector; > > + int ret; > > + > > + ret = drm_bridge_attach(bridge->encoder, priv->next_bridge, bridge, > > + DRM_BRIDGE_ATTACH_NO_CONNECTOR); > > + if (ret) > > + return ret; > > + > > + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > > + return 0; > > + > > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_DETECT) { > > + connector->polled = DRM_CONNECTOR_POLL_HPD; > > + } else { > > + connector->polled = DRM_CONNECTOR_POLL_CONNECT | > > + DRM_CONNECTOR_POLL_DISCONNECT; > > + } > > + > > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) { > > + drm_bridge_hpd_enable(priv->next_bridge, ch7033_hpd_event, > > + priv); > > + } > > + > > + drm_connector_helper_add(connector, > > + &ch7033_connector_helper_funcs); > > + ret = drm_connector_init_with_ddc(bridge->dev, &priv->connector, > > + &ch7033_connector_funcs, > > + priv->next_bridge->type, > > + priv->next_bridge->ddc); > > + if (ret) { > > + DRM_ERROR("Failed to initialize connector\n"); > > + return ret; > > + } > > + > > + return drm_connector_attach_encoder(&priv->connector, bridge->encoder); > > +} > > + > > +static void ch7033_bridge_detach(struct drm_bridge *bridge) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + > > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) > > + drm_bridge_hpd_disable(priv->next_bridge); > > + drm_connector_cleanup(&priv->connector); > > +} > > + > > +static enum drm_mode_status ch7033_bridge_mode_valid(struct drm_bridge *bridge, > > + const struct drm_display_mode *mode) > > +{ > > + if (mode->clock > 165000) > > + return MODE_CLOCK_HIGH; > > + if (mode->hdisplay >= 1920) > > + return MODE_BAD_HVALUE; > > + if (mode->vdisplay >= 1080) > > + return MODE_BAD_VVALUE; > > + return MODE_OK; > > +} > > + > > +static void ch7033_bridge_disable(struct drm_bridge *bridge) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + > > + regmap_write(priv->regmap, 0x03, 0x04); > > + regmap_update_bits(priv->regmap, 0x52, RESETDB, 0x00); > > +} > > + > > +static void ch7033_bridge_enable(struct drm_bridge *bridge) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + > > + regmap_write(priv->regmap, 0x03, 0x04); > > + regmap_update_bits(priv->regmap, 0x52, RESETDB, RESETDB); > > +} > > + > > +static void ch7033_bridge_mode_set(struct drm_bridge *bridge, > > + const struct drm_display_mode *mode, > > + const struct drm_display_mode *adjusted_mode) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + int hbporch = mode->hsync_start - mode->hdisplay; > > + int hsynclen = mode->hsync_end - mode->hsync_start; > > + int vbporch = mode->vsync_start - mode->vdisplay; > > + int vsynclen = mode->vsync_end - mode->vsync_start; > > + > > + /* > > + * Page 4 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x04); > > + > > + /* Turn everything off to set all the registers to their defaults. */ > > + regmap_write(priv->regmap, 0x52, 0x00); > > + /* Bring I/O block up. */ > > + regmap_write(priv->regmap, 0x52, RESETIB); > > + > > + /* > > + * Page 0 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x00); > > + > > + /* Bring up parts we need from the power down. */ > > + regmap_update_bits(priv->regmap, 0x07, DRI_PD | IO_PD, 0); > > + regmap_update_bits(priv->regmap, 0x08, DRI_PDDRI | PDDAC | PANEN, 0); > > + regmap_update_bits(priv->regmap, 0x09, DPD | GCKOFF | > > + HDMI_PD | VGA_PD, 0); > > + regmap_update_bits(priv->regmap, 0x0a, HD_DVIB, 0); > > + > > + /* Horizontal input timing. */ > > + regmap_write(priv->regmap, 0x0b, (mode->htotal >> 8) << 3 | > > + (mode->hdisplay >> 8)); > > + regmap_write(priv->regmap, 0x0c, mode->hdisplay); > > + regmap_write(priv->regmap, 0x0d, mode->htotal); > > + regmap_write(priv->regmap, 0x0e, (hsynclen >> 8) << 3 | > > + (hbporch >> 8)); > > + regmap_write(priv->regmap, 0x0f, hbporch); > > + regmap_write(priv->regmap, 0x10, hsynclen); > > + > > + /* Vertical input timing. */ > > + regmap_write(priv->regmap, 0x11, (mode->vtotal >> 8) << 3 | > > + (mode->vdisplay >> 8)); > > + regmap_write(priv->regmap, 0x12, mode->vdisplay); > > + regmap_write(priv->regmap, 0x13, mode->vtotal); > > + regmap_write(priv->regmap, 0x14, ((vsynclen >> 8) << 3) | > > + (vbporch >> 8)); > > + regmap_write(priv->regmap, 0x15, vbporch); > > + regmap_write(priv->regmap, 0x16, vsynclen); > > + > > + /* Input color swap. */ > > + regmap_update_bits(priv->regmap, 0x18, SWAP, BYTE_SWAP_BGR); > > + > > + /* Input clock and sync polarity. */ > > + regmap_update_bits(priv->regmap, 0x19, 0x1, mode->clock >> 16); > > + regmap_update_bits(priv->regmap, 0x19, HPO_I | VPO_I | GCLKFREQ, > > + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_I : 0 | > > + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_I : 0 | > > + mode->clock >> 16); > > + regmap_write(priv->regmap, 0x1a, mode->clock >> 8); > > + regmap_write(priv->regmap, 0x1b, mode->clock); > > + > > + /* Horizontal output timing. */ > > + regmap_write(priv->regmap, 0x1f, (mode->htotal >> 8) << 3 | > > + (mode->hdisplay >> 8)); > > + regmap_write(priv->regmap, 0x20, mode->hdisplay); > > + regmap_write(priv->regmap, 0x21, mode->htotal); > > + > > + /* Vertical output timing. */ > > + regmap_write(priv->regmap, 0x25, (mode->vtotal >> 8) << 3 | > > + (mode->vdisplay >> 8)); > > + regmap_write(priv->regmap, 0x26, mode->vdisplay); > > + regmap_write(priv->regmap, 0x27, mode->vtotal); > > + > > + /* VGA channel bypass */ > > + regmap_update_bits(priv->regmap, 0x2b, VFMT, 9); > > + > > + /* Output sync polarity. */ > > + regmap_update_bits(priv->regmap, 0x2e, HPO_O | VPO_O, > > + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_O : 0 | > > + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_O : 0); > > + > > + /* HDMI horizontal output timing. */ > > + regmap_update_bits(priv->regmap, 0x54, HWO_HDMI_HI | HOO_HDMI_HI, > > + (hsynclen >> 8) << 3 | > > + (hbporch >> 8)); > > + regmap_write(priv->regmap, 0x55, hbporch); > > + regmap_write(priv->regmap, 0x56, hsynclen); > > + > > + /* HDMI vertical output timing. */ > > + regmap_update_bits(priv->regmap, 0x57, VWO_HDMI_HI | VOO_HDMI_HI, > > + (vsynclen >> 8) << 3 | > > + (vbporch >> 8)); > > + regmap_write(priv->regmap, 0x58, vbporch); > > + regmap_write(priv->regmap, 0x59, vsynclen); > > + > > + /* Pick HDMI, not LVDS. */ > > + regmap_update_bits(priv->regmap, 0x7e, HDMI_LVDS_SEL, HDMI_LVDS_SEL); > > + > > + /* > > + * Page 1 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x01); > > + > > + /* No idea what these do, but VGA is wobbly and blinky without them. */ > > + regmap_update_bits(priv->regmap, 0x07, CKINV, CKINV); > > + regmap_update_bits(priv->regmap, 0x08, DISPON, DISPON); > > + > > + /* DRI PLL */ > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_DIVSEL, DRI_PLL_DIVSEL); > > + if (mode->clock <= 40000) { > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > > + DRI_PLL_N1_0 | > > + DRI_PLL_N3_1 | > > + DRI_PLL_N3_0, > > + 0); > > + } else if (mode->clock < 80000) { > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > > + DRI_PLL_N1_0 | > > + DRI_PLL_N3_1 | > > + DRI_PLL_N3_0, > > + DRI_PLL_N3_0 | > > + DRI_PLL_N1_0); > > + } else { > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > > + DRI_PLL_N1_0 | > > + DRI_PLL_N3_1 | > > + DRI_PLL_N3_0, > > + DRI_PLL_N3_1 | > > + DRI_PLL_N1_1); > > + } > > + > > + /* This seems to be color calibration for VGA. */ > > + regmap_write(priv->regmap, 0x64, 0x29); /* LSB Blue */ > > + regmap_write(priv->regmap, 0x65, 0x29); /* LSB Green */ > > + regmap_write(priv->regmap, 0x66, 0x29); /* LSB Red */ > > + regmap_write(priv->regmap, 0x67, 0x00); /* MSB Blue */ > > + regmap_write(priv->regmap, 0x68, 0x00); /* MSB Green */ > > + regmap_write(priv->regmap, 0x69, 0x00); /* MSB Red */ > > + > > + regmap_update_bits(priv->regmap, 0x6b, DRI_PD_SER, 0x00); > > + regmap_update_bits(priv->regmap, 0x6c, DRI_PLL_PD, 0x00); > > + > > + /* > > + * Page 3 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x03); > > + > > + /* More bypasses and apparently another HDMI/LVDS selector. */ > > + regmap_update_bits(priv->regmap, 0x28, VGACLK_BP | HM_LV_SEL, > > + VGACLK_BP | HM_LV_SEL); > > + regmap_update_bits(priv->regmap, 0x2a, HDMICLK_BP | HDMI_BP, > > + HDMICLK_BP | HDMI_BP); > > + > > + /* > > + * Page 4 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x04); > > + > > + /* Output clock. */ > > + regmap_write(priv->regmap, 0x10, mode->clock >> 16); > > + regmap_write(priv->regmap, 0x11, mode->clock >> 8); > > + regmap_write(priv->regmap, 0x12, mode->clock); > > +} > > + > > +static const struct drm_bridge_funcs ch7033_bridge_funcs = { > > + .attach = ch7033_bridge_attach, > > + .detach = ch7033_bridge_detach, > > + .mode_valid = ch7033_bridge_mode_valid, > > + .disable = ch7033_bridge_disable, > > + .enable = ch7033_bridge_enable, > > + .mode_set = ch7033_bridge_mode_set, > > +}; > > + > > +static const struct drm_encoder_funcs ch7033_encoder_funcs = { > > + .destroy = drm_encoder_cleanup, > > +}; > > + > > +static int ch7033_bind(struct device *dev, struct device *master, > > + void *data) > > +{ > > + struct drm_device *drm = data; > > + struct ch7033_priv *priv = dev_get_drvdata(dev); > > + uint32_t crtcs; > > + int ret; > > + > > + crtcs = drm_of_find_possible_crtcs(drm, dev->of_node); > > + priv->encoder.possible_crtcs = crtcs; > > + > > + ret = drm_encoder_init(drm, &priv->encoder, &ch7033_encoder_funcs, > > + DRM_MODE_ENCODER_TMDS, NULL); > > + if (ret) > > + return ret; > > + > > + ret = drm_bridge_attach(&priv->encoder, &priv->bridge, NULL, 0); > > + if (ret) > > + drm_encoder_cleanup(&priv->encoder); > > + > > + return ret; > > +} > > + > > +static void ch7033_unbind(struct device *dev, struct device *master, > > + void *data) > > +{ > > + struct ch7033_priv *priv = dev_get_drvdata(dev); > > + > > + drm_encoder_cleanup(&priv->encoder); > > +} > > + > > +static const struct regmap_config ch7033_regmap_config = { > > + .reg_bits = 8, > > + .val_bits = 8, > > + .max_register = 0x7f, > > +}; > > + > > +static const struct component_ops ch7033_ops = { > > + .bind = ch7033_bind, > > + .unbind = ch7033_unbind, > > +}; > > + > > +static int ch7033_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + struct device *dev = &client->dev; > > + struct ch7033_priv *priv; > > + unsigned int val; > > + int ret; > > + > > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > > + if (!priv) > > + return -ENOMEM; > > + > > + dev_set_drvdata(dev, priv); > > + > > + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, -1, NULL, > > + &priv->next_bridge); > > + if (ret) > > + return ret; > > + > > + priv->regmap = devm_regmap_init_i2c(client, &ch7033_regmap_config); > > + if (IS_ERR(priv->regmap)) { > > + dev_err(&client->dev, "regmap init failed\n"); > > + return PTR_ERR(priv->regmap); > > + } > > + > > + ret = regmap_read(priv->regmap, 0x00, &val); > > + if (ret < 0) { > > + dev_err(&client->dev, "error reading the model id: %d\n", ret); > > + return ret; > > + } > > + if ((val & 0xf7) != 0x56) { > > + dev_err(&client->dev, "the device is not a ch7033\n"); > > + return -ENODEV; > > + } > > + > > + regmap_write(priv->regmap, 0x03, 0x04); > > + ret = regmap_read(priv->regmap, 0x51, &val); > > + if (ret < 0) { > > + dev_err(&client->dev, "error reading the model id: %d\n", ret); > > + return ret; > > + } > > + if ((val & 0x0f) != 3) { > > + dev_err(&client->dev, "unknown revision %u\n", val); > > + return -ENODEV; > > + } > > + > > + INIT_LIST_HEAD(&priv->bridge.list); > > + priv->bridge.funcs = &ch7033_bridge_funcs; > > + priv->bridge.of_node = dev->of_node; > > + drm_bridge_add(&priv->bridge); > > + > > + ret = component_add(dev, &ch7033_ops); > > + if (ret) { > > + drm_bridge_remove(&priv->bridge); > > + return ret; > > + } > > + > > + dev_info(dev, "Chrontel CH7033 Video Encoder\n"); > > + return 0; > > +} > > + > > +static int ch7033_remove(struct i2c_client *client) > > +{ > > + struct device *dev = &client->dev; > > + struct ch7033_priv *priv = dev_get_drvdata(dev); > > + > > + component_del(dev, &ch7033_ops); > > + drm_bridge_remove(&priv->bridge); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id ch7033_dt_ids[] = { > > + { .compatible = "chrontel,ch7033", }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(of, ch7033_dt_ids); > > + > > +static const struct i2c_device_id ch7033_ids[] = { > > + { "ch7033", 0 }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(i2c, ch7033_ids); > > + > > +static struct i2c_driver ch7033_driver = { > > + .probe = ch7033_probe, > > + .remove = ch7033_remove, > > + .driver = { > > + .name = "ch7033", > > + .of_match_table = of_match_ptr(ch7033_dt_ids), > > + }, > > + .id_table = ch7033_ids, > > +}; > > + > > +module_i2c_driver(ch7033_driver); > > + > > +MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); > > +MODULE_DESCRIPTION("Chrontel CH7033 Video Encoder Driver"); > > +MODULE_LICENSE("GPL v2"); > > -- > > 2.26.0.rc2 > > > > _______________________________________________ > > dri-devel mailing list > > dri-devel@lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > > -- > Daniel Vetter > Software Engineer, Intel Corporation > http://blog.ffwll.ch
On Thu, Apr 23, 2020 at 11:18:45PM +0200, Lubomir Rintel wrote: > On Tue, Apr 21, 2020 at 02:54:12PM +0200, Daniel Vetter wrote: > > On Tue, Mar 24, 2020 at 04:19:31PM +0100, Lubomir Rintel wrote: > > > This is a driver for video encoder with VGA and DVI/HDMI outputs. > > > > > > There is no documentation for the chip -- the operation was guessed from > > > what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names > > > come from the ch7035 driver in Mediatek's GPL code dump. > > > > > > Only bare minimum is implemented -- no fancy stuff, such as scaling. That > > > would only worsen our misery. We don't load the firmware and we don't need > > > to even bother enabling the MCU. There are probably no distributable > > > firmware images anyway. > > > > > > Just like the tda998x driver, this one uses the component framework and > > > adds an encoder on component bind, so that it works with the Armada DRM > > > driver. > > Thank you for your response. > > > Uh, can we instead pls land the patches for armada to switch over to of > > bridge helpers. > > I honestly don't know -- it's not something I can do anything about. > > I didn't have any luck getting responses to my other patches for the > Armada driver. If it's just a case of unresponsive maintainer, we can take over with the drm-misc group maintained fallback in drm. Still need someone to review/ack patches ofc, but usually there's room for that in the drm-misc group. > > Iirc the big hold-up was that with direct bridge usage > > instead of component framework, the drm driver wouldn't unload. But core > > pm maintainers fixed device links to include driver unloading, and there > > was a drm_bridge patch including armada patches to do all that. > > > > But somehow it didn't land. Iirc because Russell couldn't test them on > > upstream somehow. > > This is what I've found [1]. It seems to include the device links work and > switches over the komeda driver, not armada, from components to drm_bridge: > > [1] https://patchwork.kernel.org/cover/11262351/ > > I'm wondering if this is the patch set you're referring to? Yup that was one part. Maybe ping on that thread, if Mihail still is interested in this you could cross-review each another's stuff and then land it in drm-misc. > > Adding more special cases and bridge drivers that we have to convert isn't > > going to make this any easier. > > No conversion would be necessary -- merely stripping the > component/encoder parts once they're no longer necessary. The driver > would still work just fine with drivers that don't utilize the component > framework, juts as tda998x does. Hm I was pretty sure it (series to convert to armada) existed by someone, but I can't find it anymore. Anyway if all we need is to remove a bunch of stuff, then even better. -Daniel > > This entire discussion happened in > > > > https://www.spinics.net/lists/dri-devel/msg201927.html > > > > Can't find the armada patches real quick, nor the drm_bridge patch. But > > the core infrastructure hides behind. The core pm change has been added in > > > > commit e7dd40105aac9ba051e44ad711123bc53a5e4c71 > > Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > Date: Fri Feb 1 01:59:42 2019 +0100 > > > > driver core: Add device link flag DL_FLAG_AUTOPROBE_CONSUMER > > Thank you > Lubo > > > > > Thanks, Daniel > > > > > > Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60, > > > with VGA as well as DVI. > > > > > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> > > > > > > --- > > > Changes since v3: > > > - Cosmetic changes; drop ch7033_encoder_destroy() and use > > > drm_encoder_cleanup() for drm_encoder_funcs.destroy callback > > > directly. > > > > > > Changes since v1: > > > - Sort the includes > > > - Drop a useless model id read > > > - Chain to the bridge-connector instead of dealing with the HPD/EDID > > > readout machinery ourselves > > > - Utilize regmap to access the registers > > > > > > drivers/gpu/drm/bridge/Kconfig | 10 + > > > drivers/gpu/drm/bridge/Makefile | 1 + > > > drivers/gpu/drm/bridge/chrontel-ch7033.c | 669 +++++++++++++++++++++++ > > > 3 files changed, 680 insertions(+) > > > create mode 100644 drivers/gpu/drm/bridge/chrontel-ch7033.c > > > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > > > index aaed2347ace9d..0ebc72d62a5b2 100644 > > > --- a/drivers/gpu/drm/bridge/Kconfig > > > +++ b/drivers/gpu/drm/bridge/Kconfig > > > @@ -27,6 +27,16 @@ config DRM_CDNS_DSI > > > Support Cadence DPI to DSI bridge. This is an internal > > > bridge and is meant to be directly embedded in a SoC. > > > > > > +config DRM_CHRONTEL_CH7033 > > > + tristate "Chrontel CH7033 Video Encoder" > > > + depends on OF > > > + select DRM_KMS_HELPER > > > + help > > > + Enable support for the Chrontel CH7033 VGA/DVI/HDMI Encoder, as > > > + found in the Dell Wyse 3020 thin client. > > > + > > > + If in doubt, say "N". > > > + > > > config DRM_DISPLAY_CONNECTOR > > > tristate "Display connector support" > > > depends on OF > > > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > > > index 6fb062b5b0f04..a844315feddb4 100644 > > > --- a/drivers/gpu/drm/bridge/Makefile > > > +++ b/drivers/gpu/drm/bridge/Makefile > > > @@ -1,5 +1,6 @@ > > > # SPDX-License-Identifier: GPL-2.0 > > > obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o > > > +obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > > > obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > > > obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o > > > obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o > > > diff --git a/drivers/gpu/drm/bridge/chrontel-ch7033.c b/drivers/gpu/drm/bridge/chrontel-ch7033.c > > > new file mode 100644 > > > index 0000000000000..f5cb2130684f7 > > > --- /dev/null > > > +++ b/drivers/gpu/drm/bridge/chrontel-ch7033.c > > > @@ -0,0 +1,669 @@ > > > +// SPDX-License-Identifier: GPL-2.0-only > > > +/* > > > + * Chrontel CH7033 Video Encoder Driver > > > + * > > > + * Copyright (C) 2019,2020 Lubomir Rintel > > > + */ > > > + > > > +#include <linux/component.h> > > > +#include <linux/gpio/consumer.h> > > > +#include <linux/module.h> > > > +#include <linux/regmap.h> > > > + > > > +#include <drm/drm_atomic_helper.h> > > > +#include <drm/drm_bridge.h> > > > +#include <drm/drm_edid.h> > > > +#include <drm/drm_of.h> > > > +#include <drm/drm_print.h> > > > +#include <drm/drm_probe_helper.h> > > > + > > > +/* Page 0, Register 0x07 */ > > > +enum { > > > + DRI_PD = BIT(3), > > > + IO_PD = BIT(5), > > > +}; > > > + > > > +/* Page 0, Register 0x08 */ > > > +enum { > > > + DRI_PDDRI = GENMASK(7, 4), > > > + PDDAC = GENMASK(3, 1), > > > + PANEN = BIT(0), > > > +}; > > > + > > > +/* Page 0, Register 0x09 */ > > > +enum { > > > + DPD = BIT(7), > > > + GCKOFF = BIT(6), > > > + TV_BP = BIT(5), > > > + SCLPD = BIT(4), > > > + SDPD = BIT(3), > > > + VGA_PD = BIT(2), > > > + HDBKPD = BIT(1), > > > + HDMI_PD = BIT(0), > > > +}; > > > + > > > +/* Page 0, Register 0x0a */ > > > +enum { > > > + MEMINIT = BIT(7), > > > + MEMIDLE = BIT(6), > > > + MEMPD = BIT(5), > > > + STOP = BIT(4), > > > + LVDS_PD = BIT(3), > > > + HD_DVIB = BIT(2), > > > + HDCP_PD = BIT(1), > > > + MCU_PD = BIT(0), > > > +}; > > > + > > > +/* Page 0, Register 0x18 */ > > > +enum { > > > + IDF = GENMASK(7, 4), > > > + INTEN = BIT(3), > > > + SWAP = GENMASK(2, 0), > > > +}; > > > + > > > +enum { > > > + BYTE_SWAP_RGB = 0, > > > + BYTE_SWAP_RBG = 1, > > > + BYTE_SWAP_GRB = 2, > > > + BYTE_SWAP_GBR = 3, > > > + BYTE_SWAP_BRG = 4, > > > + BYTE_SWAP_BGR = 5, > > > +}; > > > + > > > +/* Page 0, Register 0x19 */ > > > +enum { > > > + HPO_I = BIT(5), > > > + VPO_I = BIT(4), > > > + DEPO_I = BIT(3), > > > + CRYS_EN = BIT(2), > > > + GCLKFREQ = GENMASK(2, 0), > > > +}; > > > + > > > +/* Page 0, Register 0x2e */ > > > +enum { > > > + HFLIP = BIT(7), > > > + VFLIP = BIT(6), > > > + DEPO_O = BIT(5), > > > + HPO_O = BIT(4), > > > + VPO_O = BIT(3), > > > + TE = GENMASK(2, 0), > > > +}; > > > + > > > +/* Page 0, Register 0x2b */ > > > +enum { > > > + SWAPS = GENMASK(7, 4), > > > + VFMT = GENMASK(3, 0), > > > +}; > > > + > > > +/* Page 0, Register 0x54 */ > > > +enum { > > > + COMP_BP = BIT(7), > > > + DAC_EN_T = BIT(6), > > > + HWO_HDMI_HI = GENMASK(5, 3), > > > + HOO_HDMI_HI = GENMASK(2, 0), > > > +}; > > > + > > > +/* Page 0, Register 0x57 */ > > > +enum { > > > + FLDSEN = BIT(7), > > > + VWO_HDMI_HI = GENMASK(5, 3), > > > + VOO_HDMI_HI = GENMASK(2, 0), > > > +}; > > > + > > > +/* Page 0, Register 0x7e */ > > > +enum { > > > + HDMI_LVDS_SEL = BIT(7), > > > + DE_GEN = BIT(6), > > > + PWM_INDEX_HI = BIT(5), > > > + USE_DE = BIT(4), > > > + R_INT = GENMASK(3, 0), > > > +}; > > > + > > > +/* Page 1, Register 0x07 */ > > > +enum { > > > + BPCKSEL = BIT(7), > > > + DRI_CMFB_EN = BIT(6), > > > + CEC_PUEN = BIT(5), > > > + CEC_T = BIT(3), > > > + CKINV = BIT(2), > > > + CK_TVINV = BIT(1), > > > + DRI_CKS2 = BIT(0), > > > +}; > > > + > > > +/* Page 1, Register 0x08 */ > > > +enum { > > > + DACG = BIT(6), > > > + DACKTST = BIT(5), > > > + DEDGEB = BIT(4), > > > + SYO = BIT(3), > > > + DRI_IT_LVDS = GENMASK(2, 1), > > > + DISPON = BIT(0), > > > +}; > > > + > > > +/* Page 1, Register 0x0c */ > > > +enum { > > > + DRI_PLL_CP = GENMASK(7, 6), > > > + DRI_PLL_DIVSEL = BIT(5), > > > + DRI_PLL_N1_1 = BIT(4), > > > + DRI_PLL_N1_0 = BIT(3), > > > + DRI_PLL_N3_1 = BIT(2), > > > + DRI_PLL_N3_0 = BIT(1), > > > + DRI_PLL_CKTSTEN = BIT(0), > > > +}; > > > + > > > +/* Page 1, Register 0x6b */ > > > +enum { > > > + VCO3CS = GENMASK(7, 6), > > > + ICPGBK2_0 = GENMASK(5, 3), > > > + DRI_VCO357SC = BIT(2), > > > + PDPLL2 = BIT(1), > > > + DRI_PD_SER = BIT(0), > > > +}; > > > + > > > +/* Page 1, Register 0x6c */ > > > +enum { > > > + PLL2N11 = GENMASK(7, 4), > > > + PLL2N5_4 = BIT(3), > > > + PLL2N5_TOP = BIT(2), > > > + DRI_PLL_PD = BIT(1), > > > + PD_I2CM = BIT(0), > > > +}; > > > + > > > +/* Page 3, Register 0x28 */ > > > +enum { > > > + DIFF_EN = GENMASK(7, 6), > > > + CORREC_EN = GENMASK(5, 4), > > > + VGACLK_BP = BIT(3), > > > + HM_LV_SEL = BIT(2), > > > + HD_VGA_SEL = BIT(1), > > > +}; > > > + > > > +/* Page 3, Register 0x2a */ > > > +enum { > > > + LVDSCLK_BP = BIT(7), > > > + HDTVCLK_BP = BIT(6), > > > + HDMICLK_BP = BIT(5), > > > + HDTV_BP = BIT(4), > > > + HDMI_BP = BIT(3), > > > + THRWL = GENMASK(2, 0), > > > +}; > > > + > > > +/* Page 4, Register 0x52 */ > > > +enum { > > > + PGM_ARSTB = BIT(7), > > > + MCU_ARSTB = BIT(6), > > > + MCU_RETB = BIT(2), > > > + RESETIB = BIT(1), > > > + RESETDB = BIT(0), > > > +}; > > > + > > > +struct ch7033_priv { > > > + struct regmap *regmap; > > > + struct drm_bridge *next_bridge; > > > + struct drm_encoder encoder; > > > + struct drm_bridge bridge; > > > + struct drm_connector connector; > > > +}; > > > + > > > +#define conn_to_ch7033_priv(x) \ > > > + container_of(x, struct ch7033_priv, connector) > > > +#define bridge_to_ch7033_priv(x) \ > > > + container_of(x, struct ch7033_priv, bridge) > > > + > > > + > > > +static enum drm_connector_status ch7033_connector_detect( > > > + struct drm_connector *connector, bool force) > > > +{ > > > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > > > + > > > + return drm_bridge_detect(priv->next_bridge); > > > +} > > > + > > > +static const struct drm_connector_funcs ch7033_connector_funcs = { > > > + .reset = drm_atomic_helper_connector_reset, > > > + .fill_modes = drm_helper_probe_single_connector_modes, > > > + .detect = ch7033_connector_detect, > > > + .destroy = drm_connector_cleanup, > > > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > > > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > > +}; > > > + > > > +static int ch7033_connector_get_modes(struct drm_connector *connector) > > > +{ > > > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > > > + struct edid *edid; > > > + int ret; > > > + > > > + edid = drm_bridge_get_edid(priv->next_bridge, connector); > > > + drm_connector_update_edid_property(connector, edid); > > > + if (edid) { > > > + ret = drm_add_edid_modes(connector, edid); > > > + kfree(edid); > > > + } else { > > > + ret = drm_add_modes_noedid(connector, 1920, 1080); > > > + drm_set_preferred_mode(connector, 1024, 768); > > > + } > > > + > > > + return ret; > > > +} > > > + > > > +static struct drm_encoder *ch7033_connector_best_encoder( > > > + struct drm_connector *connector) > > > +{ > > > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > > > + > > > + return priv->bridge.encoder; > > > +} > > > + > > > +static const struct drm_connector_helper_funcs ch7033_connector_helper_funcs = { > > > + .get_modes = ch7033_connector_get_modes, > > > + .best_encoder = ch7033_connector_best_encoder, > > > +}; > > > + > > > +static void ch7033_hpd_event(void *arg, enum drm_connector_status status) > > > +{ > > > + struct ch7033_priv *priv = arg; > > > + > > > + if (priv->bridge.dev) > > > + drm_helper_hpd_irq_event(priv->connector.dev); > > > +} > > > + > > > +static int ch7033_bridge_attach(struct drm_bridge *bridge, > > > + enum drm_bridge_attach_flags flags) > > > +{ > > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > > + struct drm_connector *connector = &priv->connector; > > > + int ret; > > > + > > > + ret = drm_bridge_attach(bridge->encoder, priv->next_bridge, bridge, > > > + DRM_BRIDGE_ATTACH_NO_CONNECTOR); > > > + if (ret) > > > + return ret; > > > + > > > + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > > > + return 0; > > > + > > > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_DETECT) { > > > + connector->polled = DRM_CONNECTOR_POLL_HPD; > > > + } else { > > > + connector->polled = DRM_CONNECTOR_POLL_CONNECT | > > > + DRM_CONNECTOR_POLL_DISCONNECT; > > > + } > > > + > > > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) { > > > + drm_bridge_hpd_enable(priv->next_bridge, ch7033_hpd_event, > > > + priv); > > > + } > > > + > > > + drm_connector_helper_add(connector, > > > + &ch7033_connector_helper_funcs); > > > + ret = drm_connector_init_with_ddc(bridge->dev, &priv->connector, > > > + &ch7033_connector_funcs, > > > + priv->next_bridge->type, > > > + priv->next_bridge->ddc); > > > + if (ret) { > > > + DRM_ERROR("Failed to initialize connector\n"); > > > + return ret; > > > + } > > > + > > > + return drm_connector_attach_encoder(&priv->connector, bridge->encoder); > > > +} > > > + > > > +static void ch7033_bridge_detach(struct drm_bridge *bridge) > > > +{ > > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > > + > > > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) > > > + drm_bridge_hpd_disable(priv->next_bridge); > > > + drm_connector_cleanup(&priv->connector); > > > +} > > > + > > > +static enum drm_mode_status ch7033_bridge_mode_valid(struct drm_bridge *bridge, > > > + const struct drm_display_mode *mode) > > > +{ > > > + if (mode->clock > 165000) > > > + return MODE_CLOCK_HIGH; > > > + if (mode->hdisplay >= 1920) > > > + return MODE_BAD_HVALUE; > > > + if (mode->vdisplay >= 1080) > > > + return MODE_BAD_VVALUE; > > > + return MODE_OK; > > > +} > > > + > > > +static void ch7033_bridge_disable(struct drm_bridge *bridge) > > > +{ > > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > > + > > > + regmap_write(priv->regmap, 0x03, 0x04); > > > + regmap_update_bits(priv->regmap, 0x52, RESETDB, 0x00); > > > +} > > > + > > > +static void ch7033_bridge_enable(struct drm_bridge *bridge) > > > +{ > > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > > + > > > + regmap_write(priv->regmap, 0x03, 0x04); > > > + regmap_update_bits(priv->regmap, 0x52, RESETDB, RESETDB); > > > +} > > > + > > > +static void ch7033_bridge_mode_set(struct drm_bridge *bridge, > > > + const struct drm_display_mode *mode, > > > + const struct drm_display_mode *adjusted_mode) > > > +{ > > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > > + int hbporch = mode->hsync_start - mode->hdisplay; > > > + int hsynclen = mode->hsync_end - mode->hsync_start; > > > + int vbporch = mode->vsync_start - mode->vdisplay; > > > + int vsynclen = mode->vsync_end - mode->vsync_start; > > > + > > > + /* > > > + * Page 4 > > > + */ > > > + regmap_write(priv->regmap, 0x03, 0x04); > > > + > > > + /* Turn everything off to set all the registers to their defaults. */ > > > + regmap_write(priv->regmap, 0x52, 0x00); > > > + /* Bring I/O block up. */ > > > + regmap_write(priv->regmap, 0x52, RESETIB); > > > + > > > + /* > > > + * Page 0 > > > + */ > > > + regmap_write(priv->regmap, 0x03, 0x00); > > > + > > > + /* Bring up parts we need from the power down. */ > > > + regmap_update_bits(priv->regmap, 0x07, DRI_PD | IO_PD, 0); > > > + regmap_update_bits(priv->regmap, 0x08, DRI_PDDRI | PDDAC | PANEN, 0); > > > + regmap_update_bits(priv->regmap, 0x09, DPD | GCKOFF | > > > + HDMI_PD | VGA_PD, 0); > > > + regmap_update_bits(priv->regmap, 0x0a, HD_DVIB, 0); > > > + > > > + /* Horizontal input timing. */ > > > + regmap_write(priv->regmap, 0x0b, (mode->htotal >> 8) << 3 | > > > + (mode->hdisplay >> 8)); > > > + regmap_write(priv->regmap, 0x0c, mode->hdisplay); > > > + regmap_write(priv->regmap, 0x0d, mode->htotal); > > > + regmap_write(priv->regmap, 0x0e, (hsynclen >> 8) << 3 | > > > + (hbporch >> 8)); > > > + regmap_write(priv->regmap, 0x0f, hbporch); > > > + regmap_write(priv->regmap, 0x10, hsynclen); > > > + > > > + /* Vertical input timing. */ > > > + regmap_write(priv->regmap, 0x11, (mode->vtotal >> 8) << 3 | > > > + (mode->vdisplay >> 8)); > > > + regmap_write(priv->regmap, 0x12, mode->vdisplay); > > > + regmap_write(priv->regmap, 0x13, mode->vtotal); > > > + regmap_write(priv->regmap, 0x14, ((vsynclen >> 8) << 3) | > > > + (vbporch >> 8)); > > > + regmap_write(priv->regmap, 0x15, vbporch); > > > + regmap_write(priv->regmap, 0x16, vsynclen); > > > + > > > + /* Input color swap. */ > > > + regmap_update_bits(priv->regmap, 0x18, SWAP, BYTE_SWAP_BGR); > > > + > > > + /* Input clock and sync polarity. */ > > > + regmap_update_bits(priv->regmap, 0x19, 0x1, mode->clock >> 16); > > > + regmap_update_bits(priv->regmap, 0x19, HPO_I | VPO_I | GCLKFREQ, > > > + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_I : 0 | > > > + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_I : 0 | > > > + mode->clock >> 16); > > > + regmap_write(priv->regmap, 0x1a, mode->clock >> 8); > > > + regmap_write(priv->regmap, 0x1b, mode->clock); > > > + > > > + /* Horizontal output timing. */ > > > + regmap_write(priv->regmap, 0x1f, (mode->htotal >> 8) << 3 | > > > + (mode->hdisplay >> 8)); > > > + regmap_write(priv->regmap, 0x20, mode->hdisplay); > > > + regmap_write(priv->regmap, 0x21, mode->htotal); > > > + > > > + /* Vertical output timing. */ > > > + regmap_write(priv->regmap, 0x25, (mode->vtotal >> 8) << 3 | > > > + (mode->vdisplay >> 8)); > > > + regmap_write(priv->regmap, 0x26, mode->vdisplay); > > > + regmap_write(priv->regmap, 0x27, mode->vtotal); > > > + > > > + /* VGA channel bypass */ > > > + regmap_update_bits(priv->regmap, 0x2b, VFMT, 9); > > > + > > > + /* Output sync polarity. */ > > > + regmap_update_bits(priv->regmap, 0x2e, HPO_O | VPO_O, > > > + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_O : 0 | > > > + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_O : 0); > > > + > > > + /* HDMI horizontal output timing. */ > > > + regmap_update_bits(priv->regmap, 0x54, HWO_HDMI_HI | HOO_HDMI_HI, > > > + (hsynclen >> 8) << 3 | > > > + (hbporch >> 8)); > > > + regmap_write(priv->regmap, 0x55, hbporch); > > > + regmap_write(priv->regmap, 0x56, hsynclen); > > > + > > > + /* HDMI vertical output timing. */ > > > + regmap_update_bits(priv->regmap, 0x57, VWO_HDMI_HI | VOO_HDMI_HI, > > > + (vsynclen >> 8) << 3 | > > > + (vbporch >> 8)); > > > + regmap_write(priv->regmap, 0x58, vbporch); > > > + regmap_write(priv->regmap, 0x59, vsynclen); > > > + > > > + /* Pick HDMI, not LVDS. */ > > > + regmap_update_bits(priv->regmap, 0x7e, HDMI_LVDS_SEL, HDMI_LVDS_SEL); > > > + > > > + /* > > > + * Page 1 > > > + */ > > > + regmap_write(priv->regmap, 0x03, 0x01); > > > + > > > + /* No idea what these do, but VGA is wobbly and blinky without them. */ > > > + regmap_update_bits(priv->regmap, 0x07, CKINV, CKINV); > > > + regmap_update_bits(priv->regmap, 0x08, DISPON, DISPON); > > > + > > > + /* DRI PLL */ > > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_DIVSEL, DRI_PLL_DIVSEL); > > > + if (mode->clock <= 40000) { > > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > > > + DRI_PLL_N1_0 | > > > + DRI_PLL_N3_1 | > > > + DRI_PLL_N3_0, > > > + 0); > > > + } else if (mode->clock < 80000) { > > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > > > + DRI_PLL_N1_0 | > > > + DRI_PLL_N3_1 | > > > + DRI_PLL_N3_0, > > > + DRI_PLL_N3_0 | > > > + DRI_PLL_N1_0); > > > + } else { > > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > > > + DRI_PLL_N1_0 | > > > + DRI_PLL_N3_1 | > > > + DRI_PLL_N3_0, > > > + DRI_PLL_N3_1 | > > > + DRI_PLL_N1_1); > > > + } > > > + > > > + /* This seems to be color calibration for VGA. */ > > > + regmap_write(priv->regmap, 0x64, 0x29); /* LSB Blue */ > > > + regmap_write(priv->regmap, 0x65, 0x29); /* LSB Green */ > > > + regmap_write(priv->regmap, 0x66, 0x29); /* LSB Red */ > > > + regmap_write(priv->regmap, 0x67, 0x00); /* MSB Blue */ > > > + regmap_write(priv->regmap, 0x68, 0x00); /* MSB Green */ > > > + regmap_write(priv->regmap, 0x69, 0x00); /* MSB Red */ > > > + > > > + regmap_update_bits(priv->regmap, 0x6b, DRI_PD_SER, 0x00); > > > + regmap_update_bits(priv->regmap, 0x6c, DRI_PLL_PD, 0x00); > > > + > > > + /* > > > + * Page 3 > > > + */ > > > + regmap_write(priv->regmap, 0x03, 0x03); > > > + > > > + /* More bypasses and apparently another HDMI/LVDS selector. */ > > > + regmap_update_bits(priv->regmap, 0x28, VGACLK_BP | HM_LV_SEL, > > > + VGACLK_BP | HM_LV_SEL); > > > + regmap_update_bits(priv->regmap, 0x2a, HDMICLK_BP | HDMI_BP, > > > + HDMICLK_BP | HDMI_BP); > > > + > > > + /* > > > + * Page 4 > > > + */ > > > + regmap_write(priv->regmap, 0x03, 0x04); > > > + > > > + /* Output clock. */ > > > + regmap_write(priv->regmap, 0x10, mode->clock >> 16); > > > + regmap_write(priv->regmap, 0x11, mode->clock >> 8); > > > + regmap_write(priv->regmap, 0x12, mode->clock); > > > +} > > > + > > > +static const struct drm_bridge_funcs ch7033_bridge_funcs = { > > > + .attach = ch7033_bridge_attach, > > > + .detach = ch7033_bridge_detach, > > > + .mode_valid = ch7033_bridge_mode_valid, > > > + .disable = ch7033_bridge_disable, > > > + .enable = ch7033_bridge_enable, > > > + .mode_set = ch7033_bridge_mode_set, > > > +}; > > > + > > > +static const struct drm_encoder_funcs ch7033_encoder_funcs = { > > > + .destroy = drm_encoder_cleanup, > > > +}; > > > + > > > +static int ch7033_bind(struct device *dev, struct device *master, > > > + void *data) > > > +{ > > > + struct drm_device *drm = data; > > > + struct ch7033_priv *priv = dev_get_drvdata(dev); > > > + uint32_t crtcs; > > > + int ret; > > > + > > > + crtcs = drm_of_find_possible_crtcs(drm, dev->of_node); > > > + priv->encoder.possible_crtcs = crtcs; > > > + > > > + ret = drm_encoder_init(drm, &priv->encoder, &ch7033_encoder_funcs, > > > + DRM_MODE_ENCODER_TMDS, NULL); > > > + if (ret) > > > + return ret; > > > + > > > + ret = drm_bridge_attach(&priv->encoder, &priv->bridge, NULL, 0); > > > + if (ret) > > > + drm_encoder_cleanup(&priv->encoder); > > > + > > > + return ret; > > > +} > > > + > > > +static void ch7033_unbind(struct device *dev, struct device *master, > > > + void *data) > > > +{ > > > + struct ch7033_priv *priv = dev_get_drvdata(dev); > > > + > > > + drm_encoder_cleanup(&priv->encoder); > > > +} > > > + > > > +static const struct regmap_config ch7033_regmap_config = { > > > + .reg_bits = 8, > > > + .val_bits = 8, > > > + .max_register = 0x7f, > > > +}; > > > + > > > +static const struct component_ops ch7033_ops = { > > > + .bind = ch7033_bind, > > > + .unbind = ch7033_unbind, > > > +}; > > > + > > > +static int ch7033_probe(struct i2c_client *client, > > > + const struct i2c_device_id *id) > > > +{ > > > + struct device *dev = &client->dev; > > > + struct ch7033_priv *priv; > > > + unsigned int val; > > > + int ret; > > > + > > > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > > > + if (!priv) > > > + return -ENOMEM; > > > + > > > + dev_set_drvdata(dev, priv); > > > + > > > + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, -1, NULL, > > > + &priv->next_bridge); > > > + if (ret) > > > + return ret; > > > + > > > + priv->regmap = devm_regmap_init_i2c(client, &ch7033_regmap_config); > > > + if (IS_ERR(priv->regmap)) { > > > + dev_err(&client->dev, "regmap init failed\n"); > > > + return PTR_ERR(priv->regmap); > > > + } > > > + > > > + ret = regmap_read(priv->regmap, 0x00, &val); > > > + if (ret < 0) { > > > + dev_err(&client->dev, "error reading the model id: %d\n", ret); > > > + return ret; > > > + } > > > + if ((val & 0xf7) != 0x56) { > > > + dev_err(&client->dev, "the device is not a ch7033\n"); > > > + return -ENODEV; > > > + } > > > + > > > + regmap_write(priv->regmap, 0x03, 0x04); > > > + ret = regmap_read(priv->regmap, 0x51, &val); > > > + if (ret < 0) { > > > + dev_err(&client->dev, "error reading the model id: %d\n", ret); > > > + return ret; > > > + } > > > + if ((val & 0x0f) != 3) { > > > + dev_err(&client->dev, "unknown revision %u\n", val); > > > + return -ENODEV; > > > + } > > > + > > > + INIT_LIST_HEAD(&priv->bridge.list); > > > + priv->bridge.funcs = &ch7033_bridge_funcs; > > > + priv->bridge.of_node = dev->of_node; > > > + drm_bridge_add(&priv->bridge); > > > + > > > + ret = component_add(dev, &ch7033_ops); > > > + if (ret) { > > > + drm_bridge_remove(&priv->bridge); > > > + return ret; > > > + } > > > + > > > + dev_info(dev, "Chrontel CH7033 Video Encoder\n"); > > > + return 0; > > > +} > > > + > > > +static int ch7033_remove(struct i2c_client *client) > > > +{ > > > + struct device *dev = &client->dev; > > > + struct ch7033_priv *priv = dev_get_drvdata(dev); > > > + > > > + component_del(dev, &ch7033_ops); > > > + drm_bridge_remove(&priv->bridge); > > > + > > > + return 0; > > > +} > > > + > > > +static const struct of_device_id ch7033_dt_ids[] = { > > > + { .compatible = "chrontel,ch7033", }, > > > + { } > > > +}; > > > +MODULE_DEVICE_TABLE(of, ch7033_dt_ids); > > > + > > > +static const struct i2c_device_id ch7033_ids[] = { > > > + { "ch7033", 0 }, > > > + { } > > > +}; > > > +MODULE_DEVICE_TABLE(i2c, ch7033_ids); > > > + > > > +static struct i2c_driver ch7033_driver = { > > > + .probe = ch7033_probe, > > > + .remove = ch7033_remove, > > > + .driver = { > > > + .name = "ch7033", > > > + .of_match_table = of_match_ptr(ch7033_dt_ids), > > > + }, > > > + .id_table = ch7033_ids, > > > +}; > > > + > > > +module_i2c_driver(ch7033_driver); > > > + > > > +MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); > > > +MODULE_DESCRIPTION("Chrontel CH7033 Video Encoder Driver"); > > > +MODULE_LICENSE("GPL v2"); > > > -- > > > 2.26.0.rc2 > > > > > > _______________________________________________ > > > dri-devel mailing list > > > dri-devel@lists.freedesktop.org > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > > > > -- > > Daniel Vetter > > Software Engineer, Intel Corporation > > http://blog.ffwll.ch > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index aaed2347ace9d..0ebc72d62a5b2 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -27,6 +27,16 @@ config DRM_CDNS_DSI Support Cadence DPI to DSI bridge. This is an internal bridge and is meant to be directly embedded in a SoC. +config DRM_CHRONTEL_CH7033 + tristate "Chrontel CH7033 Video Encoder" + depends on OF + select DRM_KMS_HELPER + help + Enable support for the Chrontel CH7033 VGA/DVI/HDMI Encoder, as + found in the Dell Wyse 3020 thin client. + + If in doubt, say "N". + config DRM_DISPLAY_CONNECTOR tristate "Display connector support" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index 6fb062b5b0f04..a844315feddb4 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o +obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o diff --git a/drivers/gpu/drm/bridge/chrontel-ch7033.c b/drivers/gpu/drm/bridge/chrontel-ch7033.c new file mode 100644 index 0000000000000..f5cb2130684f7 --- /dev/null +++ b/drivers/gpu/drm/bridge/chrontel-ch7033.c @@ -0,0 +1,669 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Chrontel CH7033 Video Encoder Driver + * + * Copyright (C) 2019,2020 Lubomir Rintel + */ + +#include <linux/component.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/regmap.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_bridge.h> +#include <drm/drm_edid.h> +#include <drm/drm_of.h> +#include <drm/drm_print.h> +#include <drm/drm_probe_helper.h> + +/* Page 0, Register 0x07 */ +enum { + DRI_PD = BIT(3), + IO_PD = BIT(5), +}; + +/* Page 0, Register 0x08 */ +enum { + DRI_PDDRI = GENMASK(7, 4), + PDDAC = GENMASK(3, 1), + PANEN = BIT(0), +}; + +/* Page 0, Register 0x09 */ +enum { + DPD = BIT(7), + GCKOFF = BIT(6), + TV_BP = BIT(5), + SCLPD = BIT(4), + SDPD = BIT(3), + VGA_PD = BIT(2), + HDBKPD = BIT(1), + HDMI_PD = BIT(0), +}; + +/* Page 0, Register 0x0a */ +enum { + MEMINIT = BIT(7), + MEMIDLE = BIT(6), + MEMPD = BIT(5), + STOP = BIT(4), + LVDS_PD = BIT(3), + HD_DVIB = BIT(2), + HDCP_PD = BIT(1), + MCU_PD = BIT(0), +}; + +/* Page 0, Register 0x18 */ +enum { + IDF = GENMASK(7, 4), + INTEN = BIT(3), + SWAP = GENMASK(2, 0), +}; + +enum { + BYTE_SWAP_RGB = 0, + BYTE_SWAP_RBG = 1, + BYTE_SWAP_GRB = 2, + BYTE_SWAP_GBR = 3, + BYTE_SWAP_BRG = 4, + BYTE_SWAP_BGR = 5, +}; + +/* Page 0, Register 0x19 */ +enum { + HPO_I = BIT(5), + VPO_I = BIT(4), + DEPO_I = BIT(3), + CRYS_EN = BIT(2), + GCLKFREQ = GENMASK(2, 0), +}; + +/* Page 0, Register 0x2e */ +enum { + HFLIP = BIT(7), + VFLIP = BIT(6), + DEPO_O = BIT(5), + HPO_O = BIT(4), + VPO_O = BIT(3), + TE = GENMASK(2, 0), +}; + +/* Page 0, Register 0x2b */ +enum { + SWAPS = GENMASK(7, 4), + VFMT = GENMASK(3, 0), +}; + +/* Page 0, Register 0x54 */ +enum { + COMP_BP = BIT(7), + DAC_EN_T = BIT(6), + HWO_HDMI_HI = GENMASK(5, 3), + HOO_HDMI_HI = GENMASK(2, 0), +}; + +/* Page 0, Register 0x57 */ +enum { + FLDSEN = BIT(7), + VWO_HDMI_HI = GENMASK(5, 3), + VOO_HDMI_HI = GENMASK(2, 0), +}; + +/* Page 0, Register 0x7e */ +enum { + HDMI_LVDS_SEL = BIT(7), + DE_GEN = BIT(6), + PWM_INDEX_HI = BIT(5), + USE_DE = BIT(4), + R_INT = GENMASK(3, 0), +}; + +/* Page 1, Register 0x07 */ +enum { + BPCKSEL = BIT(7), + DRI_CMFB_EN = BIT(6), + CEC_PUEN = BIT(5), + CEC_T = BIT(3), + CKINV = BIT(2), + CK_TVINV = BIT(1), + DRI_CKS2 = BIT(0), +}; + +/* Page 1, Register 0x08 */ +enum { + DACG = BIT(6), + DACKTST = BIT(5), + DEDGEB = BIT(4), + SYO = BIT(3), + DRI_IT_LVDS = GENMASK(2, 1), + DISPON = BIT(0), +}; + +/* Page 1, Register 0x0c */ +enum { + DRI_PLL_CP = GENMASK(7, 6), + DRI_PLL_DIVSEL = BIT(5), + DRI_PLL_N1_1 = BIT(4), + DRI_PLL_N1_0 = BIT(3), + DRI_PLL_N3_1 = BIT(2), + DRI_PLL_N3_0 = BIT(1), + DRI_PLL_CKTSTEN = BIT(0), +}; + +/* Page 1, Register 0x6b */ +enum { + VCO3CS = GENMASK(7, 6), + ICPGBK2_0 = GENMASK(5, 3), + DRI_VCO357SC = BIT(2), + PDPLL2 = BIT(1), + DRI_PD_SER = BIT(0), +}; + +/* Page 1, Register 0x6c */ +enum { + PLL2N11 = GENMASK(7, 4), + PLL2N5_4 = BIT(3), + PLL2N5_TOP = BIT(2), + DRI_PLL_PD = BIT(1), + PD_I2CM = BIT(0), +}; + +/* Page 3, Register 0x28 */ +enum { + DIFF_EN = GENMASK(7, 6), + CORREC_EN = GENMASK(5, 4), + VGACLK_BP = BIT(3), + HM_LV_SEL = BIT(2), + HD_VGA_SEL = BIT(1), +}; + +/* Page 3, Register 0x2a */ +enum { + LVDSCLK_BP = BIT(7), + HDTVCLK_BP = BIT(6), + HDMICLK_BP = BIT(5), + HDTV_BP = BIT(4), + HDMI_BP = BIT(3), + THRWL = GENMASK(2, 0), +}; + +/* Page 4, Register 0x52 */ +enum { + PGM_ARSTB = BIT(7), + MCU_ARSTB = BIT(6), + MCU_RETB = BIT(2), + RESETIB = BIT(1), + RESETDB = BIT(0), +}; + +struct ch7033_priv { + struct regmap *regmap; + struct drm_bridge *next_bridge; + struct drm_encoder encoder; + struct drm_bridge bridge; + struct drm_connector connector; +}; + +#define conn_to_ch7033_priv(x) \ + container_of(x, struct ch7033_priv, connector) +#define bridge_to_ch7033_priv(x) \ + container_of(x, struct ch7033_priv, bridge) + + +static enum drm_connector_status ch7033_connector_detect( + struct drm_connector *connector, bool force) +{ + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); + + return drm_bridge_detect(priv->next_bridge); +} + +static const struct drm_connector_funcs ch7033_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .detect = ch7033_connector_detect, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int ch7033_connector_get_modes(struct drm_connector *connector) +{ + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); + struct edid *edid; + int ret; + + edid = drm_bridge_get_edid(priv->next_bridge, connector); + drm_connector_update_edid_property(connector, edid); + if (edid) { + ret = drm_add_edid_modes(connector, edid); + kfree(edid); + } else { + ret = drm_add_modes_noedid(connector, 1920, 1080); + drm_set_preferred_mode(connector, 1024, 768); + } + + return ret; +} + +static struct drm_encoder *ch7033_connector_best_encoder( + struct drm_connector *connector) +{ + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); + + return priv->bridge.encoder; +} + +static const struct drm_connector_helper_funcs ch7033_connector_helper_funcs = { + .get_modes = ch7033_connector_get_modes, + .best_encoder = ch7033_connector_best_encoder, +}; + +static void ch7033_hpd_event(void *arg, enum drm_connector_status status) +{ + struct ch7033_priv *priv = arg; + + if (priv->bridge.dev) + drm_helper_hpd_irq_event(priv->connector.dev); +} + +static int ch7033_bridge_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); + struct drm_connector *connector = &priv->connector; + int ret; + + ret = drm_bridge_attach(bridge->encoder, priv->next_bridge, bridge, + DRM_BRIDGE_ATTACH_NO_CONNECTOR); + if (ret) + return ret; + + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) + return 0; + + if (priv->next_bridge->ops & DRM_BRIDGE_OP_DETECT) { + connector->polled = DRM_CONNECTOR_POLL_HPD; + } else { + connector->polled = DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT; + } + + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) { + drm_bridge_hpd_enable(priv->next_bridge, ch7033_hpd_event, + priv); + } + + drm_connector_helper_add(connector, + &ch7033_connector_helper_funcs); + ret = drm_connector_init_with_ddc(bridge->dev, &priv->connector, + &ch7033_connector_funcs, + priv->next_bridge->type, + priv->next_bridge->ddc); + if (ret) { + DRM_ERROR("Failed to initialize connector\n"); + return ret; + } + + return drm_connector_attach_encoder(&priv->connector, bridge->encoder); +} + +static void ch7033_bridge_detach(struct drm_bridge *bridge) +{ + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); + + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) + drm_bridge_hpd_disable(priv->next_bridge); + drm_connector_cleanup(&priv->connector); +} + +static enum drm_mode_status ch7033_bridge_mode_valid(struct drm_bridge *bridge, + const struct drm_display_mode *mode) +{ + if (mode->clock > 165000) + return MODE_CLOCK_HIGH; + if (mode->hdisplay >= 1920) + return MODE_BAD_HVALUE; + if (mode->vdisplay >= 1080) + return MODE_BAD_VVALUE; + return MODE_OK; +} + +static void ch7033_bridge_disable(struct drm_bridge *bridge) +{ + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); + + regmap_write(priv->regmap, 0x03, 0x04); + regmap_update_bits(priv->regmap, 0x52, RESETDB, 0x00); +} + +static void ch7033_bridge_enable(struct drm_bridge *bridge) +{ + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); + + regmap_write(priv->regmap, 0x03, 0x04); + regmap_update_bits(priv->regmap, 0x52, RESETDB, RESETDB); +} + +static void ch7033_bridge_mode_set(struct drm_bridge *bridge, + const struct drm_display_mode *mode, + const struct drm_display_mode *adjusted_mode) +{ + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); + int hbporch = mode->hsync_start - mode->hdisplay; + int hsynclen = mode->hsync_end - mode->hsync_start; + int vbporch = mode->vsync_start - mode->vdisplay; + int vsynclen = mode->vsync_end - mode->vsync_start; + + /* + * Page 4 + */ + regmap_write(priv->regmap, 0x03, 0x04); + + /* Turn everything off to set all the registers to their defaults. */ + regmap_write(priv->regmap, 0x52, 0x00); + /* Bring I/O block up. */ + regmap_write(priv->regmap, 0x52, RESETIB); + + /* + * Page 0 + */ + regmap_write(priv->regmap, 0x03, 0x00); + + /* Bring up parts we need from the power down. */ + regmap_update_bits(priv->regmap, 0x07, DRI_PD | IO_PD, 0); + regmap_update_bits(priv->regmap, 0x08, DRI_PDDRI | PDDAC | PANEN, 0); + regmap_update_bits(priv->regmap, 0x09, DPD | GCKOFF | + HDMI_PD | VGA_PD, 0); + regmap_update_bits(priv->regmap, 0x0a, HD_DVIB, 0); + + /* Horizontal input timing. */ + regmap_write(priv->regmap, 0x0b, (mode->htotal >> 8) << 3 | + (mode->hdisplay >> 8)); + regmap_write(priv->regmap, 0x0c, mode->hdisplay); + regmap_write(priv->regmap, 0x0d, mode->htotal); + regmap_write(priv->regmap, 0x0e, (hsynclen >> 8) << 3 | + (hbporch >> 8)); + regmap_write(priv->regmap, 0x0f, hbporch); + regmap_write(priv->regmap, 0x10, hsynclen); + + /* Vertical input timing. */ + regmap_write(priv->regmap, 0x11, (mode->vtotal >> 8) << 3 | + (mode->vdisplay >> 8)); + regmap_write(priv->regmap, 0x12, mode->vdisplay); + regmap_write(priv->regmap, 0x13, mode->vtotal); + regmap_write(priv->regmap, 0x14, ((vsynclen >> 8) << 3) | + (vbporch >> 8)); + regmap_write(priv->regmap, 0x15, vbporch); + regmap_write(priv->regmap, 0x16, vsynclen); + + /* Input color swap. */ + regmap_update_bits(priv->regmap, 0x18, SWAP, BYTE_SWAP_BGR); + + /* Input clock and sync polarity. */ + regmap_update_bits(priv->regmap, 0x19, 0x1, mode->clock >> 16); + regmap_update_bits(priv->regmap, 0x19, HPO_I | VPO_I | GCLKFREQ, + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_I : 0 | + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_I : 0 | + mode->clock >> 16); + regmap_write(priv->regmap, 0x1a, mode->clock >> 8); + regmap_write(priv->regmap, 0x1b, mode->clock); + + /* Horizontal output timing. */ + regmap_write(priv->regmap, 0x1f, (mode->htotal >> 8) << 3 | + (mode->hdisplay >> 8)); + regmap_write(priv->regmap, 0x20, mode->hdisplay); + regmap_write(priv->regmap, 0x21, mode->htotal); + + /* Vertical output timing. */ + regmap_write(priv->regmap, 0x25, (mode->vtotal >> 8) << 3 | + (mode->vdisplay >> 8)); + regmap_write(priv->regmap, 0x26, mode->vdisplay); + regmap_write(priv->regmap, 0x27, mode->vtotal); + + /* VGA channel bypass */ + regmap_update_bits(priv->regmap, 0x2b, VFMT, 9); + + /* Output sync polarity. */ + regmap_update_bits(priv->regmap, 0x2e, HPO_O | VPO_O, + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_O : 0 | + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_O : 0); + + /* HDMI horizontal output timing. */ + regmap_update_bits(priv->regmap, 0x54, HWO_HDMI_HI | HOO_HDMI_HI, + (hsynclen >> 8) << 3 | + (hbporch >> 8)); + regmap_write(priv->regmap, 0x55, hbporch); + regmap_write(priv->regmap, 0x56, hsynclen); + + /* HDMI vertical output timing. */ + regmap_update_bits(priv->regmap, 0x57, VWO_HDMI_HI | VOO_HDMI_HI, + (vsynclen >> 8) << 3 | + (vbporch >> 8)); + regmap_write(priv->regmap, 0x58, vbporch); + regmap_write(priv->regmap, 0x59, vsynclen); + + /* Pick HDMI, not LVDS. */ + regmap_update_bits(priv->regmap, 0x7e, HDMI_LVDS_SEL, HDMI_LVDS_SEL); + + /* + * Page 1 + */ + regmap_write(priv->regmap, 0x03, 0x01); + + /* No idea what these do, but VGA is wobbly and blinky without them. */ + regmap_update_bits(priv->regmap, 0x07, CKINV, CKINV); + regmap_update_bits(priv->regmap, 0x08, DISPON, DISPON); + + /* DRI PLL */ + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_DIVSEL, DRI_PLL_DIVSEL); + if (mode->clock <= 40000) { + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | + DRI_PLL_N1_0 | + DRI_PLL_N3_1 | + DRI_PLL_N3_0, + 0); + } else if (mode->clock < 80000) { + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | + DRI_PLL_N1_0 | + DRI_PLL_N3_1 | + DRI_PLL_N3_0, + DRI_PLL_N3_0 | + DRI_PLL_N1_0); + } else { + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | + DRI_PLL_N1_0 | + DRI_PLL_N3_1 | + DRI_PLL_N3_0, + DRI_PLL_N3_1 | + DRI_PLL_N1_1); + } + + /* This seems to be color calibration for VGA. */ + regmap_write(priv->regmap, 0x64, 0x29); /* LSB Blue */ + regmap_write(priv->regmap, 0x65, 0x29); /* LSB Green */ + regmap_write(priv->regmap, 0x66, 0x29); /* LSB Red */ + regmap_write(priv->regmap, 0x67, 0x00); /* MSB Blue */ + regmap_write(priv->regmap, 0x68, 0x00); /* MSB Green */ + regmap_write(priv->regmap, 0x69, 0x00); /* MSB Red */ + + regmap_update_bits(priv->regmap, 0x6b, DRI_PD_SER, 0x00); + regmap_update_bits(priv->regmap, 0x6c, DRI_PLL_PD, 0x00); + + /* + * Page 3 + */ + regmap_write(priv->regmap, 0x03, 0x03); + + /* More bypasses and apparently another HDMI/LVDS selector. */ + regmap_update_bits(priv->regmap, 0x28, VGACLK_BP | HM_LV_SEL, + VGACLK_BP | HM_LV_SEL); + regmap_update_bits(priv->regmap, 0x2a, HDMICLK_BP | HDMI_BP, + HDMICLK_BP | HDMI_BP); + + /* + * Page 4 + */ + regmap_write(priv->regmap, 0x03, 0x04); + + /* Output clock. */ + regmap_write(priv->regmap, 0x10, mode->clock >> 16); + regmap_write(priv->regmap, 0x11, mode->clock >> 8); + regmap_write(priv->regmap, 0x12, mode->clock); +} + +static const struct drm_bridge_funcs ch7033_bridge_funcs = { + .attach = ch7033_bridge_attach, + .detach = ch7033_bridge_detach, + .mode_valid = ch7033_bridge_mode_valid, + .disable = ch7033_bridge_disable, + .enable = ch7033_bridge_enable, + .mode_set = ch7033_bridge_mode_set, +}; + +static const struct drm_encoder_funcs ch7033_encoder_funcs = { + .destroy = drm_encoder_cleanup, +}; + +static int ch7033_bind(struct device *dev, struct device *master, + void *data) +{ + struct drm_device *drm = data; + struct ch7033_priv *priv = dev_get_drvdata(dev); + uint32_t crtcs; + int ret; + + crtcs = drm_of_find_possible_crtcs(drm, dev->of_node); + priv->encoder.possible_crtcs = crtcs; + + ret = drm_encoder_init(drm, &priv->encoder, &ch7033_encoder_funcs, + DRM_MODE_ENCODER_TMDS, NULL); + if (ret) + return ret; + + ret = drm_bridge_attach(&priv->encoder, &priv->bridge, NULL, 0); + if (ret) + drm_encoder_cleanup(&priv->encoder); + + return ret; +} + +static void ch7033_unbind(struct device *dev, struct device *master, + void *data) +{ + struct ch7033_priv *priv = dev_get_drvdata(dev); + + drm_encoder_cleanup(&priv->encoder); +} + +static const struct regmap_config ch7033_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x7f, +}; + +static const struct component_ops ch7033_ops = { + .bind = ch7033_bind, + .unbind = ch7033_unbind, +}; + +static int ch7033_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct ch7033_priv *priv; + unsigned int val; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + dev_set_drvdata(dev, priv); + + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, -1, NULL, + &priv->next_bridge); + if (ret) + return ret; + + priv->regmap = devm_regmap_init_i2c(client, &ch7033_regmap_config); + if (IS_ERR(priv->regmap)) { + dev_err(&client->dev, "regmap init failed\n"); + return PTR_ERR(priv->regmap); + } + + ret = regmap_read(priv->regmap, 0x00, &val); + if (ret < 0) { + dev_err(&client->dev, "error reading the model id: %d\n", ret); + return ret; + } + if ((val & 0xf7) != 0x56) { + dev_err(&client->dev, "the device is not a ch7033\n"); + return -ENODEV; + } + + regmap_write(priv->regmap, 0x03, 0x04); + ret = regmap_read(priv->regmap, 0x51, &val); + if (ret < 0) { + dev_err(&client->dev, "error reading the model id: %d\n", ret); + return ret; + } + if ((val & 0x0f) != 3) { + dev_err(&client->dev, "unknown revision %u\n", val); + return -ENODEV; + } + + INIT_LIST_HEAD(&priv->bridge.list); + priv->bridge.funcs = &ch7033_bridge_funcs; + priv->bridge.of_node = dev->of_node; + drm_bridge_add(&priv->bridge); + + ret = component_add(dev, &ch7033_ops); + if (ret) { + drm_bridge_remove(&priv->bridge); + return ret; + } + + dev_info(dev, "Chrontel CH7033 Video Encoder\n"); + return 0; +} + +static int ch7033_remove(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct ch7033_priv *priv = dev_get_drvdata(dev); + + component_del(dev, &ch7033_ops); + drm_bridge_remove(&priv->bridge); + + return 0; +} + +static const struct of_device_id ch7033_dt_ids[] = { + { .compatible = "chrontel,ch7033", }, + { } +}; +MODULE_DEVICE_TABLE(of, ch7033_dt_ids); + +static const struct i2c_device_id ch7033_ids[] = { + { "ch7033", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ch7033_ids); + +static struct i2c_driver ch7033_driver = { + .probe = ch7033_probe, + .remove = ch7033_remove, + .driver = { + .name = "ch7033", + .of_match_table = of_match_ptr(ch7033_dt_ids), + }, + .id_table = ch7033_ids, +}; + +module_i2c_driver(ch7033_driver); + +MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); +MODULE_DESCRIPTION("Chrontel CH7033 Video Encoder Driver"); +MODULE_LICENSE("GPL v2");
This is a driver for video encoder with VGA and DVI/HDMI outputs. There is no documentation for the chip -- the operation was guessed from what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names come from the ch7035 driver in Mediatek's GPL code dump. Only bare minimum is implemented -- no fancy stuff, such as scaling. That would only worsen our misery. We don't load the firmware and we don't need to even bother enabling the MCU. There are probably no distributable firmware images anyway. Just like the tda998x driver, this one uses the component framework and adds an encoder on component bind, so that it works with the Armada DRM driver. Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60, with VGA as well as DVI. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- Changes since v3: - Cosmetic changes; drop ch7033_encoder_destroy() and use drm_encoder_cleanup() for drm_encoder_funcs.destroy callback directly. Changes since v1: - Sort the includes - Drop a useless model id read - Chain to the bridge-connector instead of dealing with the HPD/EDID readout machinery ourselves - Utilize regmap to access the registers drivers/gpu/drm/bridge/Kconfig | 10 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/chrontel-ch7033.c | 669 +++++++++++++++++++++++ 3 files changed, 680 insertions(+) create mode 100644 drivers/gpu/drm/bridge/chrontel-ch7033.c