diff mbox series

[v7,08/10] dt-bindings: ufs: Add DT binding documentation for ufs

Message ID 20200426173024.63069-9-alim.akhtar@samsung.com (mailing list archive)
State Not Applicable
Headers show
Series [v7,01/10] scsi: ufs: add quirk to fix mishandling utrlclr/utmrlclr | expand

Commit Message

Alim Akhtar April 26, 2020, 5:30 p.m. UTC 
This patch adds DT binding for samsung ufs hci

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 .../bindings/ufs/samsung,exynos-ufs.yaml      | 93 +++++++++++++++++++
 1 file changed, 93 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml

Comments

Rob Herring (Arm) May 5, 2020, 3:58 p.m. UTC | #1 
On Sun, Apr 26, 2020 at 11:00:22PM +0530, Alim Akhtar wrote:
> This patch adds DT binding for samsung ufs hci
> 
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
>  .../bindings/ufs/samsung,exynos-ufs.yaml      | 93 +++++++++++++++++++
>  1 file changed, 93 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
> 
> diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
> new file mode 100644
> index 000000000000..954338b7f37d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/ufs/samsung,exynos-ufs.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung SoC series UFS host controller Device Tree Bindings
> +
> +maintainers:
> +  - Alim Akhtar <alim.akhtar@samsung.com>
> +
> +description: |
> +  Each Samsung UFS host controller instance should have its own node.
> +  This binding define Samsung specific binding other then what is used
> +  in the common ufshcd bindings
> +  [1] Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> +
> +properties:
> +
> +  compatible:
> +    enum:
> +      - samsung,exynos7-ufs
> +
> +  reg:
> +    items:
> +     - description: HCI register
> +     - description: vendor specific register
> +     - description: unipro register
> +     - description: UFS protector register
> +
> +  reg-names:
> +    items:
> +      - const: hci
> +      - const: vs_hci
> +      - const: unipro
> +      - const: ufsp
> +
> +  clocks:
> +    maxItems: 2
> +    items:
> +      - description: ufs link core clock
> +      - description: unipro main clock
> +
> +  clock-names:
> +    maxItems: 2
> +    items:
> +      - const: core_clk
> +      - const: sclk_unipro_main
> +
> +  interrupts:
> +    items:
> +      - description: interrupt signal for various ufshc status

Just 'maxItems: 1' is fine for single item cases.

> +
> +  phys:
> +    maxItems: 1
> +    description:
> +      phandle of the ufs phy node

Can drop description.

> +
> +  phy-names:
> +      const: ufs-phy

Not much point to a name when only 1 entry.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - phys
> +  - phy-names
> +  - clocks
> +  - clock-names

additionalProperties: false

> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/exynos7-clk.h>
> +
> +    ufs: ufs@15570000 {
> +       compatible = "samsung,exynos7-ufs";
> +       reg = <0x15570000 0x100>,
> +             <0x15570100 0x100>,
> +             <0x15571000 0x200>,
> +             <0x15572000 0x300>;
> +       reg-names = "hci", "vs_hci", "unipro", "ufsp";
> +       interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
> +       clocks = <&clock_fsys1 ACLK_UFS20_LINK>,
> +                <&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
> +       clock-names = "core_clk", "sclk_unipro_main";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
> +       pclk-freq-avail-range = <70000000 133000000>;
> +       phys = <&ufs_phy>;
> +       phy-names = "ufs-phy";
> +    };
> +...
> -- 
> 2.17.1
>
Alim Akhtar May 9, 2020, 12:38 a.m. UTC | #2 
Hi Rob,

> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: 05 May 2020 21:29
> To: Alim Akhtar <alim.akhtar@samsung.com>
> Cc: devicetree@vger.kernel.org; linux-scsi@vger.kernel.org;
krzk@kernel.org;
> avri.altman@wdc.com; martin.petersen@oracle.com;
> kwmad.kim@samsung.com; stanley.chu@mediatek.com;
> cang@codeaurora.org; linux-samsung-soc@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v7 08/10] dt-bindings: ufs: Add DT binding
documentation
> for ufs
> 
> On Sun, Apr 26, 2020 at 11:00:22PM +0530, Alim Akhtar wrote:
> > This patch adds DT binding for samsung ufs hci
> >
> > Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> > ---
> >  .../bindings/ufs/samsung,exynos-ufs.yaml      | 93 +++++++++++++++++++
> >  1 file changed, 93 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
> > b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
> > new file mode 100644
> > index 000000000000..954338b7f37d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
> > @@ -0,0 +1,93 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2
> > +---
> > +$id:
> > +https://protect2.fireeye.com/url?k=0b9d9296-560b2be1-0b9c19d9-0cc47a3
> > +12ab0-
> 58b0bd73926e9ff6&q=1&u=http%3A%2F%2Fdevicetree.org%2Fschemas%2F
> > +ufs%2Fsamsung%2Cexynos-ufs.yaml%23
> > +$schema:
> > +https://protect2.fireeye.com/url?k=1fa0a694-42361fe3-1fa12ddb-0cc47a3
> > +12ab0-6911bcc836debe4d&q=1&u=http%3A%2F%2Fdevicetree.org%2Fmeta-
> schem
> > +as%2Fcore.yaml%23
> > +
> > +title: Samsung SoC series UFS host controller Device Tree Bindings
> > +
> > +maintainers:
> > +  - Alim Akhtar <alim.akhtar@samsung.com>
> > +
> > +description: |
> > +  Each Samsung UFS host controller instance should have its own node.
> > +  This binding define Samsung specific binding other then what is
> > +used
> > +  in the common ufshcd bindings
> > +  [1] Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> > +
> > +properties:
> > +
> > +  compatible:
> > +    enum:
> > +      - samsung,exynos7-ufs
> > +
> > +  reg:
> > +    items:
> > +     - description: HCI register
> > +     - description: vendor specific register
> > +     - description: unipro register
> > +     - description: UFS protector register
> > +
> > +  reg-names:
> > +    items:
> > +      - const: hci
> > +      - const: vs_hci
> > +      - const: unipro
> > +      - const: ufsp
> > +
> > +  clocks:
> > +    maxItems: 2
> > +    items:
> > +      - description: ufs link core clock
> > +      - description: unipro main clock
> > +
> > +  clock-names:
> > +    maxItems: 2
> > +    items:
> > +      - const: core_clk
> > +      - const: sclk_unipro_main
> > +
> > +  interrupts:
> > +    items:
> > +      - description: interrupt signal for various ufshc status
> 
> Just 'maxItems: 1' is fine for single item cases.
> 
Sure will update
> > +
> > +  phys:
> > +    maxItems: 1
> > +    description:
> > +      phandle of the ufs phy node
> 
> Can drop description.
> 
Ack

> > +
> > +  phy-names:
> > +      const: ufs-phy
> 
> Not much point to a name when only 1 entry.
> 
You mean drop the phy-names property itself or just const: ufs-phy? And add
maxItems: 1

> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - phys
> > +  - phy-names
> > +  - clocks
> > +  - clock-names
> 
> additionalProperties: false
> 
Sure will add
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/exynos7-clk.h>
> > +
> > +    ufs: ufs@15570000 {
> > +       compatible = "samsung,exynos7-ufs";
> > +       reg = <0x15570000 0x100>,
> > +             <0x15570100 0x100>,
> > +             <0x15571000 0x200>,
> > +             <0x15572000 0x300>;
> > +       reg-names = "hci", "vs_hci", "unipro", "ufsp";
> > +       interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
> > +       clocks = <&clock_fsys1 ACLK_UFS20_LINK>,
> > +                <&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
> > +       clock-names = "core_clk", "sclk_unipro_main";
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
> > +       pclk-freq-avail-range = <70000000 133000000>;
> > +       phys = <&ufs_phy>;
> > +       phy-names = "ufs-phy";
> > +    };
> > +...
> > --
> > 2.17.1
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
new file mode 100644
index 000000000000..954338b7f37d
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
@@ -0,0 +1,93 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/samsung,exynos-ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series UFS host controller Device Tree Bindings
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+
+description: |
+  Each Samsung UFS host controller instance should have its own node.
+  This binding define Samsung specific binding other then what is used
+  in the common ufshcd bindings
+  [1] Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+
+properties:
+
+  compatible:
+    enum:
+      - samsung,exynos7-ufs
+
+  reg:
+    items:
+     - description: HCI register
+     - description: vendor specific register
+     - description: unipro register
+     - description: UFS protector register
+
+  reg-names:
+    items:
+      - const: hci
+      - const: vs_hci
+      - const: unipro
+      - const: ufsp
+
+  clocks:
+    maxItems: 2
+    items:
+      - description: ufs link core clock
+      - description: unipro main clock
+
+  clock-names:
+    maxItems: 2
+    items:
+      - const: core_clk
+      - const: sclk_unipro_main
+
+  interrupts:
+    items:
+      - description: interrupt signal for various ufshc status
+
+  phys:
+    maxItems: 1
+    description:
+      phandle of the ufs phy node
+
+  phy-names:
+      const: ufs-phy
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phys
+  - phy-names
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    ufs: ufs@15570000 {
+       compatible = "samsung,exynos7-ufs";
+       reg = <0x15570000 0x100>,
+             <0x15570100 0x100>,
+             <0x15571000 0x200>,
+             <0x15572000 0x300>;
+       reg-names = "hci", "vs_hci", "unipro", "ufsp";
+       interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+       clocks = <&clock_fsys1 ACLK_UFS20_LINK>,
+                <&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
+       clock-names = "core_clk", "sclk_unipro_main";
+       pinctrl-names = "default";
+       pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+       pclk-freq-avail-range = <70000000 133000000>;
+       phys = <&ufs_phy>;
+       phy-names = "ufs-phy";
+    };
+...