| Message ID | 20200505161318.26200-3-nsaenzjulienne@suse.de (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Commit | fbbc5ff3f7f9f4cad562e530ae2cf5d8964fe6d3 |
| Delegated to: | Lorenzo Pieralisi |
| Headers | show |
| Series | USB: pci-quirks: Add Raspberry Pi 4 quirk | expand |
On Tue, 5 May 2020 18:13:15 +0200, Nicolas Saenz Julienne wrote: > The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip > that implements xHCI. After a PCI reset, VL805's firmware may either be > loaded directly from an EEPROM or, if not present, by the SoC's > co-processor, VideoCore. RPi4's VideoCore OS contains both the non public > firmware load logic and the VL805 firmware blob. The function this patch > introduces triggers the aforementioned process. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > --- > > Change since v7: > - Use usleep_delay() > - Add comment about PCI errors > - Don't wait on error > - Typos > > Change since v6: > - Add test to avoid loading the firmware when not needed > - Since we have it around, print VL805's firmware version, it'll make > debugging easier in the future > - Correct typos > - Add a clearer view of HW topology in patch description > > Changes since v4: > - Inline function definition when RASPBERRYPI_FIRMWARE is not defined > > Changes since v1: > - Move include into .c file and add forward declaration to .h > > drivers/firmware/raspberrypi.c | 61 ++++++++++++++++++++++ > include/soc/bcm2835/raspberrypi-firmware.h | 7 +++ > 2 files changed, 68 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
Hi Nicolas, Am 07.05.20 um 23:48 schrieb Rob Herring: > On Tue, 5 May 2020 18:13:15 +0200, Nicolas Saenz Julienne wrote: >> The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip >> that implements xHCI. After a PCI reset, VL805's firmware may either be >> loaded directly from an EEPROM or, if not present, by the SoC's >> co-processor, VideoCore. RPi4's VideoCore OS contains both the non public >> firmware load logic and the VL805 firmware blob. The function this patch >> introduces triggers the aforementioned process. >> >> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >> >> --- >> >> Change since v7: >> - Use usleep_delay() >> - Add comment about PCI errors >> - Don't wait on error >> - Typos >> >> Change since v6: >> - Add test to avoid loading the firmware when not needed >> - Since we have it around, print VL805's firmware version, it'll make >> debugging easier in the future >> - Correct typos >> - Add a clearer view of HW topology in patch description >> >> Changes since v4: >> - Inline function definition when RASPBERRYPI_FIRMWARE is not defined >> >> Changes since v1: >> - Move include into .c file and add forward declaration to .h >> >> drivers/firmware/raspberrypi.c | 61 ++++++++++++++++++++++ >> include/soc/bcm2835/raspberrypi-firmware.h | 7 +++ >> 2 files changed, 68 insertions(+) >> > Reviewed-by: Rob Herring <robh@kernel.org> i modified the code a little bit for testing, but also successfully tested it without my modifications: diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index 0d1422b..f3f4c2d 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -337,8 +337,10 @@ int rpi_firmware_init_vl805(struct pci_dev *pdev) * further down the line. */ pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, &version); - if (version) - goto exit; + if (version) { + pci_info(pdev, "VL805 EEPROM firmware version %08x\n", version); + return 0; + } dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 | PCI_FUNC(pdev->devfn) << 12; @@ -353,9 +355,8 @@ int rpi_firmware_init_vl805(struct pci_dev *pdev) pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, &version); -exit: - pci_info(pdev, "VL805 firmware version %08x\n", version); + pci_info(pdev, "VL805 RAM firmware version %08x\n", version); return 0; } EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805); Here are the my results with 3x Raspberry Pi 4: VL805 EEPROM firmware version 000137ad VL805 EEPROM firmware version 00013701 VL805 RAM firmware version 000137ad So the whole patch series is: Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Am 09.05.20 um 12:02 schrieb Stefan Wahren: > Hi Nicolas, > > Am 07.05.20 um 23:48 schrieb Rob Herring: >> On Tue, 5 May 2020 18:13:15 +0200, Nicolas Saenz Julienne wrote: >>> The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip >>> that implements xHCI. After a PCI reset, VL805's firmware may either be >>> loaded directly from an EEPROM or, if not present, by the SoC's >>> co-processor, VideoCore. RPi4's VideoCore OS contains both the non public >>> firmware load logic and the VL805 firmware blob. The function this patch >>> introduces triggers the aforementioned process. >>> >>> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >>> >>> --- >>> >>> Change since v7: >>> - Use usleep_delay() >>> - Add comment about PCI errors >>> - Don't wait on error >>> - Typos >>> >>> Change since v6: >>> - Add test to avoid loading the firmware when not needed >>> - Since we have it around, print VL805's firmware version, it'll make >>> debugging easier in the future >>> - Correct typos >>> - Add a clearer view of HW topology in patch description >>> >>> Changes since v4: >>> - Inline function definition when RASPBERRYPI_FIRMWARE is not defined >>> >>> Changes since v1: >>> - Move include into .c file and add forward declaration to .h >>> >>> drivers/firmware/raspberrypi.c | 61 ++++++++++++++++++++++ >>> include/soc/bcm2835/raspberrypi-firmware.h | 7 +++ >>> 2 files changed, 68 insertions(+) >>> >> Reviewed-by: Rob Herring <robh@kernel.org> > i modified the code a little bit for testing, but also successfully > tested it without my modifications: > > diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c > index 0d1422b..f3f4c2d 100644 > --- a/drivers/firmware/raspberrypi.c > +++ b/drivers/firmware/raspberrypi.c > @@ -337,8 +337,10 @@ int rpi_firmware_init_vl805(struct pci_dev *pdev) > * further down the line. > */ > pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, > &version); > - if (version) > - goto exit; > + if (version) { > + pci_info(pdev, "VL805 EEPROM firmware version %08x\n", > version); > + return 0; > + } > > dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 | > PCI_FUNC(pdev->devfn) << 12; > @@ -353,9 +355,8 @@ int rpi_firmware_init_vl805(struct pci_dev *pdev) > > pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, > &version); > -exit: > - pci_info(pdev, "VL805 firmware version %08x\n", version); > > + pci_info(pdev, "VL805 RAM firmware version %08x\n", version); > return 0; > } > EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805); > > Here are the my results with 3x Raspberry Pi 4: > > VL805 EEPROM firmware version 000137ad > VL805 EEPROM firmware version 00013701 > VL805 RAM firmware version 000137ad > > So the whole patch series is: > > Tested-by: Stefan Wahren <stefan.wahren@i2se.com> > Sorry, for sending from the wrong address: Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
On Sat, 2020-05-09 at 12:02 +0200, Stefan Wahren wrote: > Hi Nicolas, > > Am 07.05.20 um 23:48 schrieb Rob Herring: > > On Tue, 5 May 2020 18:13:15 +0200, Nicolas Saenz Julienne wrote: > > > The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip > > > that implements xHCI. After a PCI reset, VL805's firmware may either be > > > loaded directly from an EEPROM or, if not present, by the SoC's > > > co-processor, VideoCore. RPi4's VideoCore OS contains both the non public > > > firmware load logic and the VL805 firmware blob. The function this patch > > > introduces triggers the aforementioned process. > > > > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > > > > > --- > > > > > > Change since v7: > > > - Use usleep_delay() > > > - Add comment about PCI errors > > > - Don't wait on error > > > - Typos > > > > > > Change since v6: > > > - Add test to avoid loading the firmware when not needed > > > - Since we have it around, print VL805's firmware version, it'll make > > > debugging easier in the future > > > - Correct typos > > > - Add a clearer view of HW topology in patch description > > > > > > Changes since v4: > > > - Inline function definition when RASPBERRYPI_FIRMWARE is not defined > > > > > > Changes since v1: > > > - Move include into .c file and add forward declaration to .h > > > > > > drivers/firmware/raspberrypi.c | 61 ++++++++++++++++++++++ > > > include/soc/bcm2835/raspberrypi-firmware.h | 7 +++ > > > 2 files changed, 68 insertions(+) > > > > > Reviewed-by: Rob Herring <robh@kernel.org> > > i modified the code a little bit for testing, but also successfully > tested it without my modifications: > > diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c > index 0d1422b..f3f4c2d 100644 > --- a/drivers/firmware/raspberrypi.c > +++ b/drivers/firmware/raspberrypi.c > @@ -337,8 +337,10 @@ int rpi_firmware_init_vl805(struct pci_dev *pdev) > * further down the line. > */ > pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, > &version); > - if (version) > - goto exit; > + if (version) { > + pci_info(pdev, "VL805 EEPROM firmware version %08x\n", > version); > + return 0; > + } > > dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 | > PCI_FUNC(pdev->devfn) << 12; > @@ -353,9 +355,8 @@ int rpi_firmware_init_vl805(struct pci_dev *pdev) > > pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, > &version); > -exit: > - pci_info(pdev, "VL805 firmware version %08x\n", version); > > + pci_info(pdev, "VL805 RAM firmware version %08x\n", version); > return 0; > } > EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805); > > Here are the my results with 3x Raspberry Pi 4: > > VL805 EEPROM firmware version 000137ad > VL805 EEPROM firmware version 00013701 > VL805 RAM firmware version 000137ad > > So the whole patch series is: > > Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Thanks for taking the time! Regards, Nicolas
diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index da26a584dca0..a166ad0cec2c 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -12,6 +12,8 @@ #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/pci.h> +#include <linux/delay.h> #include <soc/bcm2835/raspberrypi-firmware.h> #define MBOX_MSG(chan, data28) (((data28) & ~0xf) | ((chan) & 0xf)) @@ -19,6 +21,8 @@ #define MBOX_DATA28(msg) ((msg) & ~0xf) #define MBOX_CHAN_PROPERTY 8 +#define VL805_PCI_CONFIG_VERSION_OFFSET 0x50 + static struct platform_device *rpi_hwmon; static struct platform_device *rpi_clk; @@ -286,6 +290,63 @@ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node) } EXPORT_SYMBOL_GPL(rpi_firmware_get); +/* + * The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that + * implements xHCI. After a PCI reset, VL805's firmware may either be loaded + * directly from an EEPROM or, if not present, by the SoC's co-processor, + * VideoCore. RPi4's VideoCore OS contains both the non public firmware load + * logic and the VL805 firmware blob. This function triggers the aforementioned + * process. + */ +int rpi_firmware_init_vl805(struct pci_dev *pdev) +{ + struct device_node *fw_np; + struct rpi_firmware *fw; + u32 dev_addr, version; + int ret; + + fw_np = of_find_compatible_node(NULL, NULL, + "raspberrypi,bcm2835-firmware"); + if (!fw_np) + return 0; + + fw = rpi_firmware_get(fw_np); + of_node_put(fw_np); + if (!fw) + return -ENODEV; + + /* + * Make sure we don't trigger a firmware load unnecessarily. + * + * If something went wrong with PCI, this whole exercise would be + * futile as VideoCore expects from us a configured PCI bus. Just take + * the faulty version (likely ~0) and let xHCI's registration fail + * further down the line. + */ + pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, &version); + if (version) + goto exit; + + dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 | + PCI_FUNC(pdev->devfn) << 12; + + ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET, + &dev_addr, sizeof(dev_addr)); + if (ret) + return ret; + + /* Wait for vl805 to startup */ + usleep_range(200, 1000); + + pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, + &version); +exit: + pci_info(pdev, "VL805 firmware version %08x\n", version); + + return 0; +} +EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805); + static const struct of_device_id rpi_firmware_of_match[] = { { .compatible = "raspberrypi,bcm2835-firmware", }, {}, diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h index cc9cdbc66403..3025aca3c358 100644 --- a/include/soc/bcm2835/raspberrypi-firmware.h +++ b/include/soc/bcm2835/raspberrypi-firmware.h @@ -10,6 +10,7 @@ #include <linux/of_device.h> struct rpi_firmware; +struct pci_dev; enum rpi_firmware_property_status { RPI_FIRMWARE_STATUS_REQUEST = 0, @@ -141,6 +142,7 @@ int rpi_firmware_property(struct rpi_firmware *fw, int rpi_firmware_property_list(struct rpi_firmware *fw, void *data, size_t tag_size); struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node); +int rpi_firmware_init_vl805(struct pci_dev *pdev); #else static inline int rpi_firmware_property(struct rpi_firmware *fw, u32 tag, void *data, size_t len) @@ -158,6 +160,11 @@ static inline struct rpi_firmware *rpi_firmware_get(struct device_node *firmware { return NULL; } + +static inline int rpi_firmware_init_vl805(struct pci_dev *pdev) +{ + return 0; +} #endif #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */
The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that implements xHCI. After a PCI reset, VL805's firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's co-processor, VideoCore. RPi4's VideoCore OS contains both the non public firmware load logic and the VL805 firmware blob. The function this patch introduces triggers the aforementioned process. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> --- Change since v7: - Use usleep_delay() - Add comment about PCI errors - Don't wait on error - Typos Change since v6: - Add test to avoid loading the firmware when not needed - Since we have it around, print VL805's firmware version, it'll make debugging easier in the future - Correct typos - Add a clearer view of HW topology in patch description Changes since v4: - Inline function definition when RASPBERRYPI_FIRMWARE is not defined Changes since v1: - Move include into .c file and add forward declaration to .h drivers/firmware/raspberrypi.c | 61 ++++++++++++++++++++++ include/soc/bcm2835/raspberrypi-firmware.h | 7 +++ 2 files changed, 68 insertions(+)