| Message ID | 20200417061618.48032-1-andy.tang@nxp.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | ac082ea87d9d6489ee26579e3cdad8d128495213 |
| Headers | show |
| Series | arm64: dts: lx2160a: add more thermal zone support | expand |
PING. BR, Andy > -----Original Message----- > From: Yuantian Tang <andy.tang@nxp.com> > Sent: 2020年4月17日 14:16 > To: shawnguo@kernel.org; robh+dt@kernel.org; mark.rutland@arm.com; > catalin.marinas@arm.com; will.deacon@arm.com > Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > linux-kernel@vger.kernel.org; Andy Tang <andy.tang@nxp.com> > Subject: [PATCH] arm64: dts: lx2160a: add more thermal zone support > > There are 7 thermal zones in lx2160a soc. Add the rest thermal zone node to > enable them. > Also correct one of the values for tmu-calibration property. > > Signed-off-by: Yuantian Tang <andy.tang@nxp.com> > --- > .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 130 +++++++++++++++++- > 1 file changed, 125 insertions(+), 5 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > index ae1b113ab162..abaeb587de48 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > @@ -436,19 +436,19 @@ > }; > > thermal-zones { > - core_thermal1: core-thermal1 { > + cluster6-7 { > polling-delay-passive = <1000>; > polling-delay = <5000>; > thermal-sensors = <&tmu 0>; > > trips { > - core_cluster_alert: core-cluster-alert { > + cluster6_7_alert: cluster6-7-alert { > temperature = <85000>; > hysteresis = <2000>; > type = "passive"; > }; > > - core_cluster_crit: core-cluster-crit { > + cluster6_7_crit: cluster6-7-crit { > temperature = <95000>; > hysteresis = <2000>; > type = "critical"; > @@ -457,7 +457,7 @@ > > cooling-maps { > map0 { > - trip = <&core_cluster_alert>; > + trip = <&cluster6_7_alert>; > cooling-device = > <&cpu0 THERMAL_NO_LIMIT > THERMAL_NO_LIMIT>, > <&cpu1 THERMAL_NO_LIMIT > THERMAL_NO_LIMIT>, @@ -478,6 +478,126 @@ > }; > }; > }; > + > + ddr-cluster5 { > + polling-delay-passive = <1000>; > + polling-delay = <5000>; > + thermal-sensors = <&tmu 1>; > + > + trips { > + ddr-cluster5-alert { > + temperature = <85000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + ddr-cluster5-crit { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + wriop { > + polling-delay-passive = <1000>; > + polling-delay = <5000>; > + thermal-sensors = <&tmu 2>; > + > + trips { > + wriop-alert { > + temperature = <85000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + wriop-crit { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + dce-qbman-hsio2 { > + polling-delay-passive = <1000>; > + polling-delay = <5000>; > + thermal-sensors = <&tmu 3>; > + > + trips { > + dce-qbman-alert { > + temperature = <85000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + dce-qbman-crit { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + ccn-dpaa-tbu { > + polling-delay-passive = <1000>; > + polling-delay = <5000>; > + thermal-sensors = <&tmu 4>; > + > + trips { > + ccn-dpaa-alert { > + temperature = <85000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + ccn-dpaa-crit { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + cluster4-hsio3 { > + polling-delay-passive = <1000>; > + polling-delay = <5000>; > + thermal-sensors = <&tmu 5>; > + > + trips { > + clust4-hsio3-alert { > + temperature = <85000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + clust4-hsio3-crit { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + cluster2-3 { > + polling-delay-passive = <1000>; > + polling-delay = <5000>; > + thermal-sensors = <&tmu 6>; > + > + trips { > + cluster2-3-alert { > + temperature = <85000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cluster2-3-crit { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > }; > > soc { > @@ -549,7 +669,7 @@ > /* Calibration data group 1 */ > <0x00000000 0x00000035 > /* Calibration data group 2 */ > - 0x00010001 0x00000154>; > + 0x00000001 0x00000154>; > little-endian; > #thermal-sensor-cells = <1>; > }; > -- > 2.17.1
On Fri, Apr 17, 2020 at 02:16:18PM +0800, Yuantian Tang wrote: > There are 7 thermal zones in lx2160a soc. Add the > rest thermal zone node to enable them. > Also correct one of the values for tmu-calibration property. > > Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Applied, thanks.
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index ae1b113ab162..abaeb587de48 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -436,19 +436,19 @@ }; thermal-zones { - core_thermal1: core-thermal1 { + cluster6-7 { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 0>; trips { - core_cluster_alert: core-cluster-alert { + cluster6_7_alert: cluster6-7-alert { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - core_cluster_crit: core-cluster-crit { + cluster6_7_crit: cluster6-7-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -457,7 +457,7 @@ cooling-maps { map0 { - trip = <&core_cluster_alert>; + trip = <&cluster6_7_alert>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, @@ -478,6 +478,126 @@ }; }; }; + + ddr-cluster5 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + + trips { + ddr-cluster5-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr-cluster5-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + wriop { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 2>; + + trips { + wriop-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + wriop-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + dce-qbman-hsio2 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 3>; + + trips { + dce-qbman-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + dce-qbman-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + ccn-dpaa-tbu { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 4>; + + trips { + ccn-dpaa-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + ccn-dpaa-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster4-hsio3 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 5>; + + trips { + clust4-hsio3-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + clust4-hsio3-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster2-3 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 6>; + + trips { + cluster2-3-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster2-3-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; }; soc { @@ -549,7 +669,7 @@ /* Calibration data group 1 */ <0x00000000 0x00000035 /* Calibration data group 2 */ - 0x00010001 0x00000154>; + 0x00000001 0x00000154>; little-endian; #thermal-sensor-cells = <1>; };
There are 7 thermal zones in lx2160a soc. Add the rest thermal zone node to enable them. Also correct one of the values for tmu-calibration property. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> --- .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 130 +++++++++++++++++- 1 file changed, 125 insertions(+), 5 deletions(-)