| Message ID | 1589418528-26410-1-git-send-email-Anson.Huang@nxp.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | d8a6511d988a80dc7b1a83bcc213c6340def3590 |
| Headers | show |
| Series | [1/2] ARM: dts: imx6qdl: Use nvmem interface to get fuse data | expand |
> From: Anson Huang <Anson.Huang@nxp.com> > Sent: Thursday, May 14, 2020 9:09 AM > > Although ocotp clock is always ON for i.MX6QDL, OCOTP can be accessed > directly, but since i.MX6QDL nvmem interface is supported, and > fsl,tempmon-data is deprecated, use it instead of getting fuse data by reading > ocotp directly, this makes all i.MX6 SoCs aligned. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Regards Aisheng
On Thu, May 14, 2020 at 09:08:47AM +0800, Anson Huang wrote: > Although ocotp clock is always ON for i.MX6QDL, OCOTP can be > accessed directly, but since i.MX6QDL nvmem interface is supported, > and fsl,tempmon-data is deprecated, use it instead of getting fuse > data by reading ocotp directly, this makes all i.MX6 SoCs aligned. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Applied both, thanks.
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 98da446..1763c2b 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -74,7 +74,8 @@ interrupt-parent = <&gpc>; interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; #thermal-sensor-cells = <0>; }; @@ -1171,6 +1172,14 @@ cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; }; tzasc@21d0000 { /* TZASC1 */
Although ocotp clock is always ON for i.MX6QDL, OCOTP can be accessed directly, but since i.MX6QDL nvmem interface is supported, and fsl,tempmon-data is deprecated, use it instead of getting fuse data by reading ocotp directly, this makes all i.MX6 SoCs aligned. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- arch/arm/boot/dts/imx6qdl.dtsi | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)