diff mbox series

[v2,3/7] dt-bindings: watchdog: dw-wdt: Add watchdog TOPs array property

Message ID 20200510105807.880-4-Sergey.Semin@baikalelectronics.ru (mailing list archive)
State Not Applicable
Headers show
Series [v2,1/7] dt-bindings: watchdog: Convert DW WDT binding to DT schema | expand

Commit Message

Serge Semin May 10, 2020, 10:58 a.m. UTC
In case if DW Watchdog IP core is built with WDT_USE_FIX_TOP == false,
a custom timeout periods are used to preset the timer counter. In
this case that periods should be specified in a new "snps,watchdog-tops"
property of the DW watchdog dts node.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-mips@vger.kernel.org

---

Rob, I had to remove your Reviewed-by tag, since the patch needed
to be updated a bit (see changelog).

Changelog v2:
- Rearrange SoBs.
- Move $ref to the root level of the "snps,watchdog-tops" property
  so does the constraints.
- Add default TOP values array.
- Discard the label definition from the new bindings example.
---
 .../bindings/watchdog/snps,dw-wdt.yaml        | 33 +++++++++++++++++++
 1 file changed, 33 insertions(+)

Comments

Rob Herring May 18, 2020, 8:40 p.m. UTC | #1
On Sun, May 10, 2020 at 01:58:03PM +0300, Serge Semin wrote:
> In case if DW Watchdog IP core is built with WDT_USE_FIX_TOP == false,
> a custom timeout periods are used to preset the timer counter. In
> this case that periods should be specified in a new "snps,watchdog-tops"
> property of the DW watchdog dts node.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Cc: Paul Burton <paulburton@kernel.org>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: linux-mips@vger.kernel.org
> 
> ---
> 
> Rob, I had to remove your Reviewed-by tag, since the patch needed
> to be updated a bit (see changelog).
> 
> Changelog v2:
> - Rearrange SoBs.
> - Move $ref to the root level of the "snps,watchdog-tops" property
>   so does the constraints.
> - Add default TOP values array.
> - Discard the label definition from the new bindings example.
> ---
>  .../bindings/watchdog/snps,dw-wdt.yaml        | 33 +++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
> index 5bf6dc6377f3..cc741fb5a685 100644
> --- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
> @@ -39,6 +39,24 @@ properties:
>      description: Phandle to the DW Watchdog reset lane
>      maxItems: 1
>  
> +  snps,watchdog-tops:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: |
> +      DW APB Watchdog custom timer intervals - Timeout Period ranges (TOPs).
> +      Each TOP is a number loaded into the watchdog counter at the moment of
> +      the timer restart. The counter decrementing happens each tick of the
> +      reference clock. Therefore the TOPs array is equivalent to an array of
> +      the timer expiration intervals supported by the DW APB Watchdog. Note
> +      DW APB Watchdog IP-core might be synthesized with fixed TOP values,
> +      in which case this property is unnecessary with default TOPs utilized.
> +    default: [0x0001000 0x0002000 0x0004000 0x0008000
> +      0x0010000 0x0020000 0x0040000 0x0080000
> +      0x0100000 0x0200000 0x0400000 0x0800000
> +      0x1000000 0x2000000 0x4000000 0x8000000]
> +    items:
> +      minItems: 16
> +      maxItems: 16

Drop 'items' and move these up a level. That may have given you some 
issues, but I made some fixes recently.

With that,

Reviewed-by: Rob Herring <robh@kernel.org>

Rob
Serge Semin May 18, 2020, 9:42 p.m. UTC | #2
On Mon, May 18, 2020 at 02:40:37PM -0600, Rob Herring wrote:
> On Sun, May 10, 2020 at 01:58:03PM +0300, Serge Semin wrote:
> > In case if DW Watchdog IP core is built with WDT_USE_FIX_TOP == false,
> > a custom timeout periods are used to preset the timer counter. In
> > this case that periods should be specified in a new "snps,watchdog-tops"
> > property of the DW watchdog dts node.
> > 
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> > Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> > Cc: Paul Burton <paulburton@kernel.org>
> > Cc: Ralf Baechle <ralf@linux-mips.org>
> > Cc: Arnd Bergmann <arnd@arndb.de>
> > Cc: Philipp Zabel <p.zabel@pengutronix.de>
> > Cc: linux-mips@vger.kernel.org
> > 
> > ---
> > 
> > Rob, I had to remove your Reviewed-by tag, since the patch needed
> > to be updated a bit (see changelog).
> > 
> > Changelog v2:
> > - Rearrange SoBs.
> > - Move $ref to the root level of the "snps,watchdog-tops" property
> >   so does the constraints.
> > - Add default TOP values array.
> > - Discard the label definition from the new bindings example.
> > ---
> >  .../bindings/watchdog/snps,dw-wdt.yaml        | 33 +++++++++++++++++++
> >  1 file changed, 33 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
> > index 5bf6dc6377f3..cc741fb5a685 100644
> > --- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
> > +++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
> > @@ -39,6 +39,24 @@ properties:
> >      description: Phandle to the DW Watchdog reset lane
> >      maxItems: 1
> >  
> > +  snps,watchdog-tops:
> > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > +    description: |
> > +      DW APB Watchdog custom timer intervals - Timeout Period ranges (TOPs).
> > +      Each TOP is a number loaded into the watchdog counter at the moment of
> > +      the timer restart. The counter decrementing happens each tick of the
> > +      reference clock. Therefore the TOPs array is equivalent to an array of
> > +      the timer expiration intervals supported by the DW APB Watchdog. Note
> > +      DW APB Watchdog IP-core might be synthesized with fixed TOP values,
> > +      in which case this property is unnecessary with default TOPs utilized.
> > +    default: [0x0001000 0x0002000 0x0004000 0x0008000
> > +      0x0010000 0x0020000 0x0040000 0x0080000
> > +      0x0100000 0x0200000 0x0400000 0x0800000
> > +      0x1000000 0x2000000 0x4000000 0x8000000]
> > +    items:
> > +      minItems: 16
> > +      maxItems: 16
> 
> Drop 'items' and move these up a level. That may have given you some 
> issues, but I made some fixes recently.

Ok. Thanks.

-Sergey

> 
> With that,
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> 
> Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
index 5bf6dc6377f3..cc741fb5a685 100644
--- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
@@ -39,6 +39,24 @@  properties:
     description: Phandle to the DW Watchdog reset lane
     maxItems: 1
 
+  snps,watchdog-tops:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      DW APB Watchdog custom timer intervals - Timeout Period ranges (TOPs).
+      Each TOP is a number loaded into the watchdog counter at the moment of
+      the timer restart. The counter decrementing happens each tick of the
+      reference clock. Therefore the TOPs array is equivalent to an array of
+      the timer expiration intervals supported by the DW APB Watchdog. Note
+      DW APB Watchdog IP-core might be synthesized with fixed TOP values,
+      in which case this property is unnecessary with default TOPs utilized.
+    default: [0x0001000 0x0002000 0x0004000 0x0008000
+      0x0010000 0x0020000 0x0040000 0x0080000
+      0x0100000 0x0200000 0x0400000 0x0800000
+      0x1000000 0x2000000 0x4000000 0x8000000]
+    items:
+      minItems: 16
+      maxItems: 16
+
 unevaluatedProperties: false
 
 required:
@@ -55,4 +73,19 @@  examples:
       clocks = <&per_base_clk>;
       resets = <&wdt_rst>;
     };
+
+  - |
+    watchdog@ffd02000 {
+      compatible = "snps,dw-wdt";
+      reg = <0xffd02000 0x1000>;
+      interrupts = <0 171 4>;
+      clocks = <&per_base_clk>;
+      clock-names = "tclk";
+      snps,watchdog-tops = <0x000000FF 0x000001FF 0x000003FF
+                            0x000007FF 0x0000FFFF 0x0001FFFF
+                            0x0003FFFF 0x0007FFFF 0x000FFFFF
+                            0x001FFFFF 0x003FFFFF 0x007FFFFF
+                            0x00FFFFFF 0x01FFFFFF 0x03FFFFFF
+                            0x07FFFFFF>;
+    };
 ...