| Message ID | 20200520064816.3954-1-jbx6244@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC] arm64: dts: rockchip: fix dmas dma-names for rk3308 i2s node | expand |
On 2020-05-20 07:48, Johan Jonker wrote: > One of the current rk3308 'i2s' nodes has a different dma layout > with only 1 item. Table 9-2 DMAC1 Request Mapping Table shows that > there 2 dma sources available, so fix the dmas and dma-names > for the rk3308 'i2s' node. > > 10 I2S/PCM_2CH_1 tx High level > 11 I2S/PCM_2CH_1 rx High level ...however table 1-5 in the same manual (at least that I could find) says request 10 is reserved. Does that mean it was intended to be wired up for this, but ended up broken for some reason? Do you have hardware to confirm whether this works reliably or not? Robin. > Signed-off-by: Johan Jonker <jbx6244@gmail.com> > --- > arch/arm64/boot/dts/rockchip/rk3308.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi > index ac7f69407..79c1dd1fe 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi > +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi > @@ -564,8 +564,8 @@ > interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&cru SCLK_I2S1_2CH>, <&cru HCLK_I2S1_2CH>; > clock-names = "i2s_clk", "i2s_hclk"; > - dmas = <&dmac1 11>; > - dma-names = "rx"; > + dmas = <&dmac1 10>, <&dmac1 11>; > + dma-names = "tx", "rx"; > resets = <&cru SRST_I2S1_2CH_M>, <&cru SRST_I2S1_2CH_H>; > reset-names = "reset-m", "reset-h"; > status = "disabled"; >
Hi Robin, Kever, Caesar, On 5/21/20 1:48 PM, Robin Murphy wrote: > On 2020-05-20 07:48, Johan Jonker wrote: >> One of the current rk3308 'i2s' nodes has a different dma layout >> with only 1 item. Table 9-2 DMAC1 Request Mapping Table shows that >> there 2 dma sources available, so fix the dmas and dma-names >> for the rk3308 'i2s' node. >> >> 10 I2S/PCM_2CH_1 tx High level >> 11 I2S/PCM_2CH_1 rx High level > > ...however table 1-5 in the same manual (at least that I could find) > says request 10 is reserved. Does that mean it was intended to be wired > up for this, but ended up broken for some reason? > > Do you have hardware to confirm whether this works reliably or not? No, I don't. A description for 3308 was added to rockchip-i2s.yaml with only rx by myself. It would be nice if someone could test, confirm or give a hint. Could someone from Rockchip(Kever, Caesar) explain the 'Reserved' in Table 1-5 ? Table 1-5 RK3308 DMAC1 hardware request connection list 10 Reserved High level 11 I2S_2CH_1 rx High level > > Robin. > >> Signed-off-by: Johan Jonker <jbx6244@gmail.com> >> --- >> arch/arm64/boot/dts/rockchip/rk3308.dtsi | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi >> b/arch/arm64/boot/dts/rockchip/rk3308.dtsi >> index ac7f69407..79c1dd1fe 100644 >> --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi >> +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi >> @@ -564,8 +564,8 @@ >> interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; >> clocks = <&cru SCLK_I2S1_2CH>, <&cru HCLK_I2S1_2CH>; >> clock-names = "i2s_clk", "i2s_hclk"; >> - dmas = <&dmac1 11>; >> - dma-names = "rx"; >> + dmas = <&dmac1 10>, <&dmac1 11>; >> + dma-names = "tx", "rx"; >> resets = <&cru SRST_I2S1_2CH_M>, <&cru SRST_I2S1_2CH_H>; >> reset-names = "reset-m", "reset-h"; >> status = "disabled"; >>
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index ac7f69407..79c1dd1fe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -564,8 +564,8 @@ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_I2S1_2CH>, <&cru HCLK_I2S1_2CH>; clock-names = "i2s_clk", "i2s_hclk"; - dmas = <&dmac1 11>; - dma-names = "rx"; + dmas = <&dmac1 10>, <&dmac1 11>; + dma-names = "tx", "rx"; resets = <&cru SRST_I2S1_2CH_M>, <&cru SRST_I2S1_2CH_H>; reset-names = "reset-m", "reset-h"; status = "disabled";
One of the current rk3308 'i2s' nodes has a different dma layout with only 1 item. Table 9-2 DMAC1 Request Mapping Table shows that there 2 dma sources available, so fix the dmas and dma-names for the rk3308 'i2s' node. 10 I2S/PCM_2CH_1 tx High level 11 I2S/PCM_2CH_1 rx High level Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- arch/arm64/boot/dts/rockchip/rk3308.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)