| Message ID | 20200521145757.245774-1-alainm@chromium.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Marcel Holtmann |
| Headers | show |
| Series | [BlueZ,v3] doc:adding definitions for load default params mgmt op | expand |
Hi Alain, On Thu, May 21, 2020 at 8:05 AM Alain Michaud <alainm@chromium.org> wrote: > > This change adds the definition for the load default parameter command. > In particular, this command is used to load default parameters for > various operations in the kernel. This mechanism is also expandable to > future values that may be necessary. > > This will allow bluetoothd to load parameters from a conf file that may > be customized for the specific requirements of each platforms. > > --- > rebase against current master > > doc/mgmt-api.txt | 62 ++++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 62 insertions(+) > > diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt > index 6ee01fed8..c6575e654 100644 > --- a/doc/mgmt-api.txt > +++ b/doc/mgmt-api.txt > @@ -3223,6 +3223,68 @@ Set Experimental Feature Command > Invalid Index > > > +Load Default Controller Parameter Command > +============================= > + > + Command Code: 0x004b > + Controller Index: <controller id> > + Command Parameters: Parameter_Count (2 Octets) > + Parameter1 { > + Parameter_Type (2 Octet) > + Value_Length (1 Octet) > + Value (0-255 Octets) > + } > + Parameter2 { } > + ... > + Return Parameters: > + > + This command is used to feed the kernel a list of default controller > + parameters. > + > + Currently defined Parameter_Type values are: > + > + 0x0000 BR/EDR Page Scan Type > + 0x0001 BR/EDR Page Scan Interval > + 0x0002 BR/EDR Page Scan Window > + 0x0003 BR/EDR Inquiry Scan Type > + 0x0004 BR/EDR Inquiry Scan Interval > + 0x0005 BR/EDR Inquiry Scan Window > + 0x0006 BR/EDR Link Supervision Timeout > + 0x0007 BR/EDR Page Timeout > + 0x0008 BR/EDR Min Sniff Interval > + 0x0009 BR/EDR Max Sniff Interval > + 0x000a LE Advertisement Min Interval > + 0x000b LE Advertisement Max Interval > + 0x000c LE Multi Advertisement Rotation Interval > + 0x000d LE Scanning Interval for auto connect > + 0x000e LE Scanning Window for auto connect > + 0x000f LE Scanning Interval for HID only > + 0x0010 LE Scanning Window for HID only I remember commenting that we don't have profile information on the kernel so Im not sure how you are planning to detect the when the device is HID or not? > + 0x0012 LE Scanning Interval for wake scenarios > + 0x0013 LE Scanning Window for wake scenarios > + 0x0014 LE Scanning Interval for discovery > + 0x0015 LE Scanning Window for discovery > + 0x0016 LE Scanning Interval for adv monitoring > + 0x0017 LE Scanning Window for adv monitoring > + 0x0018 LE Scanning Interval for connect > + 0x0019 LE Scanning Window for connect > + 0x001a LE Min Connection Interval > + 0x001b LE Max Connection Interval > + 0x001c LE Connection Connection Latency > + 0x001d LE Connection Supervision Timeout > + > + This command can be used when the controller is not powered and > + all settings will be programmed once powered. Note that these only > + control the default parameters. Higher level Apis may influence the > + effective value used. > + > + This command generates a Command Complete event on success or > + a Command Status event on failure. > + > + Possible errors: Invalid Parameters > + Invalid Index > + > + > Command Complete Event > ====================== > > -- > 2.26.2.761.g0e0b3e54be-goog >
Hi Alain, On Thu, May 21, 2020 at 1:12 PM Alain Michaud <alainmichaud@google.com> wrote: > > Hi Luiz, > > > On Thu, May 21, 2020 at 12:26 PM Luiz Augusto von Dentz <luiz.dentz@gmail.com> wrote: >> >> Hi Alain, >> >> On Thu, May 21, 2020 at 8:05 AM Alain Michaud <alainm@chromium.org> wrote: >> > >> > This change adds the definition for the load default parameter command. >> > In particular, this command is used to load default parameters for >> > various operations in the kernel. This mechanism is also expandable to >> > future values that may be necessary. >> > >> > This will allow bluetoothd to load parameters from a conf file that may >> > be customized for the specific requirements of each platforms. >> > >> > --- >> > rebase against current master >> > >> > doc/mgmt-api.txt | 62 ++++++++++++++++++++++++++++++++++++++++++++++++ >> > 1 file changed, 62 insertions(+) >> > >> > diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt >> > index 6ee01fed8..c6575e654 100644 >> > --- a/doc/mgmt-api.txt >> > +++ b/doc/mgmt-api.txt >> > @@ -3223,6 +3223,68 @@ Set Experimental Feature Command >> > Invalid Index >> > >> > >> > +Load Default Controller Parameter Command >> > +============================= >> > + >> > + Command Code: 0x004b >> > + Controller Index: <controller id> >> > + Command Parameters: Parameter_Count (2 Octets) >> > + Parameter1 { >> > + Parameter_Type (2 Octet) >> > + Value_Length (1 Octet) >> > + Value (0-255 Octets) >> > + } >> > + Parameter2 { } >> > + ... >> > + Return Parameters: >> > + >> > + This command is used to feed the kernel a list of default controller >> > + parameters. >> > + >> > + Currently defined Parameter_Type values are: >> > + >> > + 0x0000 BR/EDR Page Scan Type >> > + 0x0001 BR/EDR Page Scan Interval >> > + 0x0002 BR/EDR Page Scan Window >> > + 0x0003 BR/EDR Inquiry Scan Type >> > + 0x0004 BR/EDR Inquiry Scan Interval >> > + 0x0005 BR/EDR Inquiry Scan Window >> > + 0x0006 BR/EDR Link Supervision Timeout >> > + 0x0007 BR/EDR Page Timeout >> > + 0x0008 BR/EDR Min Sniff Interval >> > + 0x0009 BR/EDR Max Sniff Interval >> > + 0x000a LE Advertisement Min Interval >> > + 0x000b LE Advertisement Max Interval >> > + 0x000c LE Multi Advertisement Rotation Interval >> > + 0x000d LE Scanning Interval for auto connect >> > + 0x000e LE Scanning Window for auto connect >> > + 0x000f LE Scanning Interval for HID only >> > + 0x0010 LE Scanning Window for HID only >> >> I remember commenting that we don't have profile information on the >> kernel so Im not sure how you are planning to detect the when the >> device is HID or not? > > I expect we'll need to add an Add Device flag to carry that information down into the kernel. The hid profile already sends an op, so it's relatively trivial to carry that information in so we can apply specific scanning requirements for that case (which are less aggressive and therefore have less of an impact to Wifi and BT performance). Well if we will need to feed that information of the profile type we might as well just feed the intervals directly, that way any profile that needs some different parameters than the default can all use the same command and we don't have to grow this list when a new profile want to use different parameters. >> >> >> > + 0x0012 LE Scanning Interval for wake scenarios >> > + 0x0013 LE Scanning Window for wake scenarios >> > + 0x0014 LE Scanning Interval for discovery >> > + 0x0015 LE Scanning Window for discovery >> > + 0x0016 LE Scanning Interval for adv monitoring >> > + 0x0017 LE Scanning Window for adv monitoring >> > + 0x0018 LE Scanning Interval for connect >> > + 0x0019 LE Scanning Window for connect >> > + 0x001a LE Min Connection Interval >> > + 0x001b LE Max Connection Interval >> > + 0x001c LE Connection Connection Latency >> > + 0x001d LE Connection Supervision Timeout >> > + >> > + This command can be used when the controller is not powered and >> > + all settings will be programmed once powered. Note that these only >> > + control the default parameters. Higher level Apis may influence the >> > + effective value used. >> > + >> > + This command generates a Command Complete event on success or >> > + a Command Status event on failure. >> > + >> > + Possible errors: Invalid Parameters >> > + Invalid Index >> > + >> > + >> > Command Complete Event >> > ====================== >> > >> > -- >> > 2.26.2.761.g0e0b3e54be-goog >> > >> >> >> -- >> Luiz Augusto von Dentz
Hi Luiz On Thu, May 21, 2020 at 6:05 PM Luiz Augusto von Dentz <luiz.dentz@gmail.com> wrote: > > Hi Alain, > > On Thu, May 21, 2020 at 1:12 PM Alain Michaud <alainmichaud@google.com> wrote: > > > > Hi Luiz, > > > > > > On Thu, May 21, 2020 at 12:26 PM Luiz Augusto von Dentz <luiz.dentz@gmail.com> wrote: > >> > >> Hi Alain, > >> > >> On Thu, May 21, 2020 at 8:05 AM Alain Michaud <alainm@chromium.org> wrote: > >> > > >> > This change adds the definition for the load default parameter command. > >> > In particular, this command is used to load default parameters for > >> > various operations in the kernel. This mechanism is also expandable to > >> > future values that may be necessary. > >> > > >> > This will allow bluetoothd to load parameters from a conf file that may > >> > be customized for the specific requirements of each platforms. > >> > > >> > --- > >> > rebase against current master > >> > > >> > doc/mgmt-api.txt | 62 ++++++++++++++++++++++++++++++++++++++++++++++++ > >> > 1 file changed, 62 insertions(+) > >> > > >> > diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt > >> > index 6ee01fed8..c6575e654 100644 > >> > --- a/doc/mgmt-api.txt > >> > +++ b/doc/mgmt-api.txt > >> > @@ -3223,6 +3223,68 @@ Set Experimental Feature Command > >> > Invalid Index > >> > > >> > > >> > +Load Default Controller Parameter Command > >> > +============================= > >> > + > >> > + Command Code: 0x004b > >> > + Controller Index: <controller id> > >> > + Command Parameters: Parameter_Count (2 Octets) > >> > + Parameter1 { > >> > + Parameter_Type (2 Octet) > >> > + Value_Length (1 Octet) > >> > + Value (0-255 Octets) > >> > + } > >> > + Parameter2 { } > >> > + ... > >> > + Return Parameters: > >> > + > >> > + This command is used to feed the kernel a list of default controller > >> > + parameters. > >> > + > >> > + Currently defined Parameter_Type values are: > >> > + > >> > + 0x0000 BR/EDR Page Scan Type > >> > + 0x0001 BR/EDR Page Scan Interval > >> > + 0x0002 BR/EDR Page Scan Window > >> > + 0x0003 BR/EDR Inquiry Scan Type > >> > + 0x0004 BR/EDR Inquiry Scan Interval > >> > + 0x0005 BR/EDR Inquiry Scan Window > >> > + 0x0006 BR/EDR Link Supervision Timeout > >> > + 0x0007 BR/EDR Page Timeout > >> > + 0x0008 BR/EDR Min Sniff Interval > >> > + 0x0009 BR/EDR Max Sniff Interval > >> > + 0x000a LE Advertisement Min Interval > >> > + 0x000b LE Advertisement Max Interval > >> > + 0x000c LE Multi Advertisement Rotation Interval > >> > + 0x000d LE Scanning Interval for auto connect > >> > + 0x000e LE Scanning Window for auto connect > >> > + 0x000f LE Scanning Interval for HID only > >> > + 0x0010 LE Scanning Window for HID only > >> > >> I remember commenting that we don't have profile information on the > >> kernel so Im not sure how you are planning to detect the when the > >> device is HID or not? > > > > I expect we'll need to add an Add Device flag to carry that information down into the kernel. The hid profile already sends an op, so it's relatively trivial to carry that information in so we can apply specific scanning requirements for that case (which are less aggressive and therefore have less of an impact to Wifi and BT performance). > > Well if we will need to feed that information of the profile type we > might as well just feed the intervals directly, that way any profile > that needs some different parameters than the default can all use the > same command and we don't have to grow this list when a new profile > want to use different parameters. > That might be another option indeed. I wonder how far you'd want to take this to have the profile provide all the values. At some point, you'd need some logic that would pick the value that meets all the profile requirements so if one wants w:100, i:200 and another wants w:200: i400, you may need to scan at 100% to meet the requirements of all profiles... I think that with the current proposal, while less flexible, may avoid this complexity/condition.. > >> > >> > >> > + 0x0012 LE Scanning Interval for wake scenarios > >> > + 0x0013 LE Scanning Window for wake scenarios > >> > + 0x0014 LE Scanning Interval for discovery > >> > + 0x0015 LE Scanning Window for discovery > >> > + 0x0016 LE Scanning Interval for adv monitoring > >> > + 0x0017 LE Scanning Window for adv monitoring > >> > + 0x0018 LE Scanning Interval for connect > >> > + 0x0019 LE Scanning Window for connect > >> > + 0x001a LE Min Connection Interval > >> > + 0x001b LE Max Connection Interval > >> > + 0x001c LE Connection Connection Latency > >> > + 0x001d LE Connection Supervision Timeout > >> > + > >> > + This command can be used when the controller is not powered and > >> > + all settings will be programmed once powered. Note that these only > >> > + control the default parameters. Higher level Apis may influence the > >> > + effective value used. > >> > + > >> > + This command generates a Command Complete event on success or > >> > + a Command Status event on failure. > >> > + > >> > + Possible errors: Invalid Parameters > >> > + Invalid Index > >> > + > >> > + > >> > Command Complete Event > >> > ====================== > >> > > >> > -- > >> > 2.26.2.761.g0e0b3e54be-goog > >> > > >> > >> > >> -- > >> Luiz Augusto von Dentz > > > > -- > Luiz Augusto von Dentz
Hi Alain, On Thu, May 21, 2020 at 3:28 PM Alain Michaud <alainmichaud@google.com> wrote: > > Hi Luiz > > > On Thu, May 21, 2020 at 6:05 PM Luiz Augusto von Dentz > <luiz.dentz@gmail.com> wrote: > > > > Hi Alain, > > > > On Thu, May 21, 2020 at 1:12 PM Alain Michaud <alainmichaud@google.com> wrote: > > > > > > Hi Luiz, > > > > > > > > > On Thu, May 21, 2020 at 12:26 PM Luiz Augusto von Dentz <luiz.dentz@gmail.com> wrote: > > >> > > >> Hi Alain, > > >> > > >> On Thu, May 21, 2020 at 8:05 AM Alain Michaud <alainm@chromium.org> wrote: > > >> > > > >> > This change adds the definition for the load default parameter command. > > >> > In particular, this command is used to load default parameters for > > >> > various operations in the kernel. This mechanism is also expandable to > > >> > future values that may be necessary. > > >> > > > >> > This will allow bluetoothd to load parameters from a conf file that may > > >> > be customized for the specific requirements of each platforms. > > >> > > > >> > --- > > >> > rebase against current master > > >> > > > >> > doc/mgmt-api.txt | 62 ++++++++++++++++++++++++++++++++++++++++++++++++ > > >> > 1 file changed, 62 insertions(+) > > >> > > > >> > diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt > > >> > index 6ee01fed8..c6575e654 100644 > > >> > --- a/doc/mgmt-api.txt > > >> > +++ b/doc/mgmt-api.txt > > >> > @@ -3223,6 +3223,68 @@ Set Experimental Feature Command > > >> > Invalid Index > > >> > > > >> > > > >> > +Load Default Controller Parameter Command > > >> > +============================= > > >> > + > > >> > + Command Code: 0x004b > > >> > + Controller Index: <controller id> > > >> > + Command Parameters: Parameter_Count (2 Octets) > > >> > + Parameter1 { > > >> > + Parameter_Type (2 Octet) > > >> > + Value_Length (1 Octet) > > >> > + Value (0-255 Octets) > > >> > + } > > >> > + Parameter2 { } > > >> > + ... > > >> > + Return Parameters: > > >> > + > > >> > + This command is used to feed the kernel a list of default controller > > >> > + parameters. > > >> > + > > >> > + Currently defined Parameter_Type values are: > > >> > + > > >> > + 0x0000 BR/EDR Page Scan Type > > >> > + 0x0001 BR/EDR Page Scan Interval > > >> > + 0x0002 BR/EDR Page Scan Window > > >> > + 0x0003 BR/EDR Inquiry Scan Type > > >> > + 0x0004 BR/EDR Inquiry Scan Interval > > >> > + 0x0005 BR/EDR Inquiry Scan Window > > >> > + 0x0006 BR/EDR Link Supervision Timeout > > >> > + 0x0007 BR/EDR Page Timeout > > >> > + 0x0008 BR/EDR Min Sniff Interval > > >> > + 0x0009 BR/EDR Max Sniff Interval > > >> > + 0x000a LE Advertisement Min Interval > > >> > + 0x000b LE Advertisement Max Interval > > >> > + 0x000c LE Multi Advertisement Rotation Interval > > >> > + 0x000d LE Scanning Interval for auto connect > > >> > + 0x000e LE Scanning Window for auto connect > > >> > + 0x000f LE Scanning Interval for HID only > > >> > + 0x0010 LE Scanning Window for HID only > > >> > > >> I remember commenting that we don't have profile information on the > > >> kernel so Im not sure how you are planning to detect the when the > > >> device is HID or not? > > > > > > I expect we'll need to add an Add Device flag to carry that information down into the kernel. The hid profile already sends an op, so it's relatively trivial to carry that information in so we can apply specific scanning requirements for that case (which are less aggressive and therefore have less of an impact to Wifi and BT performance). > > > > Well if we will need to feed that information of the profile type we > > might as well just feed the intervals directly, that way any profile > > that needs some different parameters than the default can all use the > > same command and we don't have to grow this list when a new profile > > want to use different parameters. > > > That might be another option indeed. I wonder how far you'd want to > take this to have the profile provide all the values. At some point, > you'd need some logic that would pick the value that meets all the > profile requirements so if one wants w:100, i:200 and another wants > w:200: i400, you may need to scan at 100% to meet the requirements of > all profiles... I think that with the current proposal, while less > flexible, may avoid this complexity/condition.. Not sure I follow you here, what I had in mind was that the profile provides its own settings for scanning but perhaps you are saying that in case there are multiple profiles involved we would have to aggregate the parameters, well that has to be done either way even if we use simple types, in which case there can be multiple defaults (one for each profile) that the kernel must aggregate or we do aggregate them at userspace and just provide the end result. In the end I guess this means that the connect scanning parameters should probably be per device rather than a using a globals with per profile exceptions, much like connection parameters are per device as well. > > >> > > >> > > >> > + 0x0012 LE Scanning Interval for wake scenarios > > >> > + 0x0013 LE Scanning Window for wake scenarios > > >> > + 0x0014 LE Scanning Interval for discovery > > >> > + 0x0015 LE Scanning Window for discovery > > >> > + 0x0016 LE Scanning Interval for adv monitoring > > >> > + 0x0017 LE Scanning Window for adv monitoring > > >> > + 0x0018 LE Scanning Interval for connect > > >> > + 0x0019 LE Scanning Window for connect > > >> > + 0x001a LE Min Connection Interval > > >> > + 0x001b LE Max Connection Interval > > >> > + 0x001c LE Connection Connection Latency > > >> > + 0x001d LE Connection Supervision Timeout > > >> > + > > >> > + This command can be used when the controller is not powered and > > >> > + all settings will be programmed once powered. Note that these only > > >> > + control the default parameters. Higher level Apis may influence the > > >> > + effective value used. > > >> > + > > >> > + This command generates a Command Complete event on success or > > >> > + a Command Status event on failure. > > >> > + > > >> > + Possible errors: Invalid Parameters > > >> > + Invalid Index > > >> > + > > >> > + > > >> > Command Complete Event > > >> > ====================== > > >> > > > >> > -- > > >> > 2.26.2.761.g0e0b3e54be-goog > > >> > > > >> > > >> > > >> -- > > >> Luiz Augusto von Dentz > > > > > > > > -- > > Luiz Augusto von Dentz
Hi Alain, On Thu, May 21, 2020 at 4:44 PM Alain Michaud <alainmichaud@google.com> wrote: > > Hi Luiz > > On Thu., May 21, 2020, 7:19 p.m. Luiz Augusto von Dentz, <luiz.dentz@gmail.com> wrote: >> >> Hi Alain, >> >> On Thu, May 21, 2020 at 3:28 PM Alain Michaud <alainmichaud@google.com> wrote: >> > >> > Hi Luiz >> > >> > >> > On Thu, May 21, 2020 at 6:05 PM Luiz Augusto von Dentz >> > <luiz.dentz@gmail.com> wrote: >> > > >> > > Hi Alain, >> > > >> > > On Thu, May 21, 2020 at 1:12 PM Alain Michaud <alainmichaud@google.com> wrote: >> > > > >> > > > Hi Luiz, >> > > > >> > > > >> > > > On Thu, May 21, 2020 at 12:26 PM Luiz Augusto von Dentz <luiz.dentz@gmail.com> wrote: >> > > >> >> > > >> Hi Alain, >> > > >> >> > > >> On Thu, May 21, 2020 at 8:05 AM Alain Michaud <alainm@chromium.org> wrote: >> > > >> > >> > > >> > This change adds the definition for the load default parameter command. >> > > >> > In particular, this command is used to load default parameters for >> > > >> > various operations in the kernel. This mechanism is also expandable to >> > > >> > future values that may be necessary. >> > > >> > >> > > >> > This will allow bluetoothd to load parameters from a conf file that may >> > > >> > be customized for the specific requirements of each platforms. >> > > >> > >> > > >> > --- >> > > >> > rebase against current master >> > > >> > >> > > >> > doc/mgmt-api.txt | 62 ++++++++++++++++++++++++++++++++++++++++++++++++ >> > > >> > 1 file changed, 62 insertions(+) >> > > >> > >> > > >> > diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt >> > > >> > index 6ee01fed8..c6575e654 100644 >> > > >> > --- a/doc/mgmt-api.txt >> > > >> > +++ b/doc/mgmt-api.txt >> > > >> > @@ -3223,6 +3223,68 @@ Set Experimental Feature Command >> > > >> > Invalid Index >> > > >> > >> > > >> > >> > > >> > +Load Default Controller Parameter Command >> > > >> > +============================= >> > > >> > + >> > > >> > + Command Code: 0x004b >> > > >> > + Controller Index: <controller id> >> > > >> > + Command Parameters: Parameter_Count (2 Octets) >> > > >> > + Parameter1 { >> > > >> > + Parameter_Type (2 Octet) >> > > >> > + Value_Length (1 Octet) >> > > >> > + Value (0-255 Octets) >> > > >> > + } >> > > >> > + Parameter2 { } >> > > >> > + ... >> > > >> > + Return Parameters: >> > > >> > + >> > > >> > + This command is used to feed the kernel a list of default controller >> > > >> > + parameters. >> > > >> > + >> > > >> > + Currently defined Parameter_Type values are: >> > > >> > + >> > > >> > + 0x0000 BR/EDR Page Scan Type >> > > >> > + 0x0001 BR/EDR Page Scan Interval >> > > >> > + 0x0002 BR/EDR Page Scan Window >> > > >> > + 0x0003 BR/EDR Inquiry Scan Type >> > > >> > + 0x0004 BR/EDR Inquiry Scan Interval >> > > >> > + 0x0005 BR/EDR Inquiry Scan Window >> > > >> > + 0x0006 BR/EDR Link Supervision Timeout >> > > >> > + 0x0007 BR/EDR Page Timeout >> > > >> > + 0x0008 BR/EDR Min Sniff Interval >> > > >> > + 0x0009 BR/EDR Max Sniff Interval >> > > >> > + 0x000a LE Advertisement Min Interval >> > > >> > + 0x000b LE Advertisement Max Interval >> > > >> > + 0x000c LE Multi Advertisement Rotation Interval >> > > >> > + 0x000d LE Scanning Interval for auto connect >> > > >> > + 0x000e LE Scanning Window for auto connect >> > > >> > + 0x000f LE Scanning Interval for HID only >> > > >> > + 0x0010 LE Scanning Window for HID only >> > > >> >> > > >> I remember commenting that we don't have profile information on the >> > > >> kernel so Im not sure how you are planning to detect the when the >> > > >> device is HID or not? >> > > > >> > > > I expect we'll need to add an Add Device flag to carry that information down into the kernel. The hid profile already sends an op, so it's relatively trivial to carry that information in so we can apply specific scanning requirements for that case (which are less aggressive and therefore have less of an impact to Wifi and BT performance). >> > > >> > > Well if we will need to feed that information of the profile type we >> > > might as well just feed the intervals directly, that way any profile >> > > that needs some different parameters than the default can all use the >> > > same command and we don't have to grow this list when a new profile >> > > want to use different parameters. >> > > >> > That might be another option indeed. I wonder how far you'd want to >> > take this to have the profile provide all the values. At some point, >> > you'd need some logic that would pick the value that meets all the >> > profile requirements so if one wants w:100, i:200 and another wants >> > w:200: i400, you may need to scan at 100% to meet the requirements of >> > all profiles... I think that with the current proposal, while less >> > flexible, may avoid this complexity/condition.. >> >> Not sure I follow you here, what I had in mind was that the profile >> provides its own settings for scanning but perhaps you are saying that >> in case there are multiple profiles involved we would have to >> aggregate the parameters, well that has to be done either way even if >> we use simple types, in which case there can be multiple defaults (one >> for each profile) that the kernel must aggregate or we do aggregate >> them at userspace and just provide the end result. In the end I guess >> this means that the connect scanning parameters should probably be per >> device rather than a using a globals with per profile exceptions, much >> like connection parameters are per device as well. > > > You got the idea. Aggregation would be needed, but with simple types, we can have simple logic such as if only hid is added (via the flag, we use the smaller duty cycle provided by the hid parameters defined in this patch), else, we use the passive scanning parameters as we do today. In essence, with this logic, no aggregation of settings is necessary since it is up to the platform who set the various values via their .conf file. Well you will need to know when to apply the hid params, so to me it still seems a per device policy, what Im missing? > Scan parameters are global, they can't be per connection like the connection parameters. Not when you are scanning to connect to specifica device, perhaps you want to expand on where each scanning parameter set takes place then. >> >> >> > > >> >> > > >> >> > > >> > + 0x0012 LE Scanning Interval for wake scenarios >> > > >> > + 0x0013 LE Scanning Window for wake scenarios >> > > >> > + 0x0014 LE Scanning Interval for discovery >> > > >> > + 0x0015 LE Scanning Window for discovery >> > > >> > + 0x0016 LE Scanning Interval for adv monitoring >> > > >> > + 0x0017 LE Scanning Window for adv monitoring >> > > >> > + 0x0018 LE Scanning Interval for connect >> > > >> > + 0x0019 LE Scanning Window for connect >> > > >> > + 0x001a LE Min Connection Interval >> > > >> > + 0x001b LE Max Connection Interval >> > > >> > + 0x001c LE Connection Connection Latency >> > > >> > + 0x001d LE Connection Supervision Timeout >> > > >> > + >> > > >> > + This command can be used when the controller is not powered and >> > > >> > + all settings will be programmed once powered. Note that these only >> > > >> > + control the default parameters. Higher level Apis may influence the >> > > >> > + effective value used. >> > > >> > + >> > > >> > + This command generates a Command Complete event on success or >> > > >> > + a Command Status event on failure. >> > > >> > + >> > > >> > + Possible errors: Invalid Parameters >> > > >> > + Invalid Index >> > > >> > + >> > > >> > + >> > > >> > Command Complete Event >> > > >> > ====================== >> > > >> > >> > > >> > -- >> > > >> > 2.26.2.761.g0e0b3e54be-goog >> > > >> > >> > > >> >> > > >> >> > > >> -- >> > > >> Luiz Augusto von Dentz >> > > >> > > >> > > >> > > -- >> > > Luiz Augusto von Dentz >> >> >> >> -- >> Luiz Augusto von Dentz
Hi Alain, On Thu, May 21, 2020 at 6:04 PM Alain Michaud <alainmichaud@google.com> wrote: > > > > On Thu., May 21, 2020, 8:14 p.m. Luiz Augusto von Dentz, <luiz.dentz@gmail.com> wrote: >> >> Hi Alain, >> >> On Thu, May 21, 2020 at 4:44 PM Alain Michaud <alainmichaud@google.com> wrote: >> > >> > Hi Luiz >> > >> > On Thu., May 21, 2020, 7:19 p.m. Luiz Augusto von Dentz, <luiz.dentz@gmail.com> wrote: >> >> >> >> Hi Alain, >> >> >> >> On Thu, May 21, 2020 at 3:28 PM Alain Michaud <alainmichaud@google.com> wrote: >> >> > >> >> > Hi Luiz >> >> > >> >> > >> >> > On Thu, May 21, 2020 at 6:05 PM Luiz Augusto von Dentz >> >> > <luiz.dentz@gmail.com> wrote: >> >> > > >> >> > > Hi Alain, >> >> > > >> >> > > On Thu, May 21, 2020 at 1:12 PM Alain Michaud <alainmichaud@google.com> wrote: >> >> > > > >> >> > > > Hi Luiz, >> >> > > > >> >> > > > >> >> > > > On Thu, May 21, 2020 at 12:26 PM Luiz Augusto von Dentz <luiz.dentz@gmail.com> wrote: >> >> > > >> >> >> > > >> Hi Alain, >> >> > > >> >> >> > > >> On Thu, May 21, 2020 at 8:05 AM Alain Michaud <alainm@chromium.org> wrote: >> >> > > >> > >> >> > > >> > This change adds the definition for the load default parameter command. >> >> > > >> > In particular, this command is used to load default parameters for >> >> > > >> > various operations in the kernel. This mechanism is also expandable to >> >> > > >> > future values that may be necessary. >> >> > > >> > >> >> > > >> > This will allow bluetoothd to load parameters from a conf file that may >> >> > > >> > be customized for the specific requirements of each platforms. >> >> > > >> > >> >> > > >> > --- >> >> > > >> > rebase against current master >> >> > > >> > >> >> > > >> > doc/mgmt-api.txt | 62 ++++++++++++++++++++++++++++++++++++++++++++++++ >> >> > > >> > 1 file changed, 62 insertions(+) >> >> > > >> > >> >> > > >> > diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt >> >> > > >> > index 6ee01fed8..c6575e654 100644 >> >> > > >> > --- a/doc/mgmt-api.txt >> >> > > >> > +++ b/doc/mgmt-api.txt >> >> > > >> > @@ -3223,6 +3223,68 @@ Set Experimental Feature Command >> >> > > >> > Invalid Index >> >> > > >> > >> >> > > >> > >> >> > > >> > +Load Default Controller Parameter Command >> >> > > >> > +============================= >> >> > > >> > + >> >> > > >> > + Command Code: 0x004b >> >> > > >> > + Controller Index: <controller id> >> >> > > >> > + Command Parameters: Parameter_Count (2 Octets) >> >> > > >> > + Parameter1 { >> >> > > >> > + Parameter_Type (2 Octet) >> >> > > >> > + Value_Length (1 Octet) >> >> > > >> > + Value (0-255 Octets) >> >> > > >> > + } >> >> > > >> > + Parameter2 { } >> >> > > >> > + ... >> >> > > >> > + Return Parameters: >> >> > > >> > + >> >> > > >> > + This command is used to feed the kernel a list of default controller >> >> > > >> > + parameters. >> >> > > >> > + >> >> > > >> > + Currently defined Parameter_Type values are: >> >> > > >> > + >> >> > > >> > + 0x0000 BR/EDR Page Scan Type >> >> > > >> > + 0x0001 BR/EDR Page Scan Interval >> >> > > >> > + 0x0002 BR/EDR Page Scan Window >> >> > > >> > + 0x0003 BR/EDR Inquiry Scan Type >> >> > > >> > + 0x0004 BR/EDR Inquiry Scan Interval >> >> > > >> > + 0x0005 BR/EDR Inquiry Scan Window >> >> > > >> > + 0x0006 BR/EDR Link Supervision Timeout >> >> > > >> > + 0x0007 BR/EDR Page Timeout >> >> > > >> > + 0x0008 BR/EDR Min Sniff Interval >> >> > > >> > + 0x0009 BR/EDR Max Sniff Interval >> >> > > >> > + 0x000a LE Advertisement Min Interval >> >> > > >> > + 0x000b LE Advertisement Max Interval >> >> > > >> > + 0x000c LE Multi Advertisement Rotation Interval >> >> > > >> > + 0x000d LE Scanning Interval for auto connect >> >> > > >> > + 0x000e LE Scanning Window for auto connect >> >> > > >> > + 0x000f LE Scanning Interval for HID only >> >> > > >> > + 0x0010 LE Scanning Window for HID only >> >> > > >> >> >> > > >> I remember commenting that we don't have profile information on the >> >> > > >> kernel so Im not sure how you are planning to detect the when the >> >> > > >> device is HID or not? >> >> > > > >> >> > > > I expect we'll need to add an Add Device flag to carry that information down into the kernel. The hid profile already sends an op, so it's relatively trivial to carry that information in so we can apply specific scanning requirements for that case (which are less aggressive and therefore have less of an impact to Wifi and BT performance). >> >> > > >> >> > > Well if we will need to feed that information of the profile type we >> >> > > might as well just feed the intervals directly, that way any profile >> >> > > that needs some different parameters than the default can all use the >> >> > > same command and we don't have to grow this list when a new profile >> >> > > want to use different parameters. >> >> > > >> >> > That might be another option indeed. I wonder how far you'd want to >> >> > take this to have the profile provide all the values. At some point, >> >> > you'd need some logic that would pick the value that meets all the >> >> > profile requirements so if one wants w:100, i:200 and another wants >> >> > w:200: i400, you may need to scan at 100% to meet the requirements of >> >> > all profiles... I think that with the current proposal, while less >> >> > flexible, may avoid this complexity/condition.. >> >> >> >> Not sure I follow you here, what I had in mind was that the profile >> >> provides its own settings for scanning but perhaps you are saying that >> >> in case there are multiple profiles involved we would have to >> >> aggregate the parameters, well that has to be done either way even if >> >> we use simple types, in which case there can be multiple defaults (one >> >> for each profile) that the kernel must aggregate or we do aggregate >> >> them at userspace and just provide the end result. In the end I guess >> >> this means that the connect scanning parameters should probably be per >> >> device rather than a using a globals with per profile exceptions, much >> >> like connection parameters are per device as well. >> > >> > >> > You got the idea. Aggregation would be needed, but with simple types, we can have simple logic such as if only hid is added (via the flag, we use the smaller duty cycle provided by the hid parameters defined in this patch), else, we use the passive scanning parameters as we do today. In essence, with this logic, no aggregation of settings is necessary since it is up to the platform who set the various values via their .conf file. >> >> Well you will need to know when to apply the hid params, so to me it >> still seems a per device policy, what Im missing? > > It's effectively passive scanning based on what requested it. >> >> >> > Scan parameters are global, they can't be per connection like the connection parameters. >> >> Not when you are scanning to connect to specifica device, perhaps you >> want to expand on where each scanning parameter set takes place then. > > > Today, it's all passive scanning. This would introduce the concept of hid only passive scanning where we can have a lower scanning duty cycle and save bandwidth and power. So the intend is to switch passive scanning 'modes', perhaps Im missing an API or policy to do that, or is the indend to do this automagically? It is a little bit hard to follow given that a system can have many different peripherals, each with different scanning requirements, or the idea is to apply HID mode only if there are HID devices paired? >> >> >> >> >> >> >> > > >> >> >> > > >> >> >> > > >> > + 0x0012 LE Scanning Interval for wake scenarios >> >> > > >> > + 0x0013 LE Scanning Window for wake scenarios >> >> > > >> > + 0x0014 LE Scanning Interval for discovery >> >> > > >> > + 0x0015 LE Scanning Window for discovery >> >> > > >> > + 0x0016 LE Scanning Interval for adv monitoring >> >> > > >> > + 0x0017 LE Scanning Window for adv monitoring >> >> > > >> > + 0x0018 LE Scanning Interval for connect >> >> > > >> > + 0x0019 LE Scanning Window for connect >> >> > > >> > + 0x001a LE Min Connection Interval >> >> > > >> > + 0x001b LE Max Connection Interval >> >> > > >> > + 0x001c LE Connection Connection Latency >> >> > > >> > + 0x001d LE Connection Supervision Timeout >> >> > > >> > + >> >> > > >> > + This command can be used when the controller is not powered and >> >> > > >> > + all settings will be programmed once powered. Note that these only >> >> > > >> > + control the default parameters. Higher level Apis may influence the >> >> > > >> > + effective value used. >> >> > > >> > + >> >> > > >> > + This command generates a Command Complete event on success or >> >> > > >> > + a Command Status event on failure. >> >> > > >> > + >> >> > > >> > + Possible errors: Invalid Parameters >> >> > > >> > + Invalid Index >> >> > > >> > + >> >> > > >> > + >> >> > > >> > Command Complete Event >> >> > > >> > ====================== >> >> > > >> > >> >> > > >> > -- >> >> > > >> > 2.26.2.761.g0e0b3e54be-goog >> >> > > >> > >> >> > > >> >> >> > > >> >> >> > > >> -- >> >> > > >> Luiz Augusto von Dentz >> >> > > >> >> > > >> >> > > >> >> > > -- >> >> > > Luiz Augusto von Dentz >> >> >> >> >> >> >> >> -- >> >> Luiz Augusto von Dentz >> >> >> >> -- >> Luiz Augusto von Dentz
Hi Luiz, Marcel. Would you feel more comfortable if I remove the HID only mode reference from this for now until it is officially introduced in the kernel? I'd like to make progress on the rest in the meantime. Thanks, Alain On Fri, May 22, 2020 at 8:47 PM Alain Michaud <alainmichaud@google.com> wrote: > > Hi Luiz, > > On Fri., May 22, 2020, 2:04 p.m. Luiz Augusto von Dentz, <luiz.dentz@gmail.com> wrote: >> >> Hi Alain, >> >> On Thu, May 21, 2020 at 6:04 PM Alain Michaud <alainmichaud@google.com> wrote: >> > >> > >> > >> > On Thu., May 21, 2020, 8:14 p.m. Luiz Augusto von Dentz, <luiz.dentz@gmail.com> wrote: >> >> >> >> Hi Alain, >> >> >> >> On Thu, May 21, 2020 at 4:44 PM Alain Michaud <alainmichaud@google.com> wrote: >> >> > >> >> > Hi Luiz >> >> > >> >> > On Thu., May 21, 2020, 7:19 p.m. Luiz Augusto von Dentz, <luiz.dentz@gmail.com> wrote: >> >> >> >> >> >> Hi Alain, >> >> >> >> >> >> On Thu, May 21, 2020 at 3:28 PM Alain Michaud <alainmichaud@google.com> wrote: >> >> >> > >> >> >> > Hi Luiz >> >> >> > >> >> >> > >> >> >> > On Thu, May 21, 2020 at 6:05 PM Luiz Augusto von Dentz >> >> >> > <luiz.dentz@gmail.com> wrote: >> >> >> > > >> >> >> > > Hi Alain, >> >> >> > > >> >> >> > > On Thu, May 21, 2020 at 1:12 PM Alain Michaud <alainmichaud@google.com> wrote: >> >> >> > > > >> >> >> > > > Hi Luiz, >> >> >> > > > >> >> >> > > > >> >> >> > > > On Thu, May 21, 2020 at 12:26 PM Luiz Augusto von Dentz <luiz.dentz@gmail.com> wrote: >> >> >> > > >> >> >> >> > > >> Hi Alain, >> >> >> > > >> >> >> >> > > >> On Thu, May 21, 2020 at 8:05 AM Alain Michaud <alainm@chromium.org> wrote: >> >> >> > > >> > >> >> >> > > >> > This change adds the definition for the load default parameter command. >> >> >> > > >> > In particular, this command is used to load default parameters for >> >> >> > > >> > various operations in the kernel. This mechanism is also expandable to >> >> >> > > >> > future values that may be necessary. >> >> >> > > >> > >> >> >> > > >> > This will allow bluetoothd to load parameters from a conf file that may >> >> >> > > >> > be customized for the specific requirements of each platforms. >> >> >> > > >> > >> >> >> > > >> > --- >> >> >> > > >> > rebase against current master >> >> >> > > >> > >> >> >> > > >> > doc/mgmt-api.txt | 62 ++++++++++++++++++++++++++++++++++++++++++++++++ >> >> >> > > >> > 1 file changed, 62 insertions(+) >> >> >> > > >> > >> >> >> > > >> > diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt >> >> >> > > >> > index 6ee01fed8..c6575e654 100644 >> >> >> > > >> > --- a/doc/mgmt-api.txt >> >> >> > > >> > +++ b/doc/mgmt-api.txt >> >> >> > > >> > @@ -3223,6 +3223,68 @@ Set Experimental Feature Command >> >> >> > > >> > Invalid Index >> >> >> > > >> > >> >> >> > > >> > >> >> >> > > >> > +Load Default Controller Parameter Command >> >> >> > > >> > +============================= >> >> >> > > >> > + >> >> >> > > >> > + Command Code: 0x004b >> >> >> > > >> > + Controller Index: <controller id> >> >> >> > > >> > + Command Parameters: Parameter_Count (2 Octets) >> >> >> > > >> > + Parameter1 { >> >> >> > > >> > + Parameter_Type (2 Octet) >> >> >> > > >> > + Value_Length (1 Octet) >> >> >> > > >> > + Value (0-255 Octets) >> >> >> > > >> > + } >> >> >> > > >> > + Parameter2 { } >> >> >> > > >> > + ... >> >> >> > > >> > + Return Parameters: >> >> >> > > >> > + >> >> >> > > >> > + This command is used to feed the kernel a list of default controller >> >> >> > > >> > + parameters. >> >> >> > > >> > + >> >> >> > > >> > + Currently defined Parameter_Type values are: >> >> >> > > >> > + >> >> >> > > >> > + 0x0000 BR/EDR Page Scan Type >> >> >> > > >> > + 0x0001 BR/EDR Page Scan Interval >> >> >> > > >> > + 0x0002 BR/EDR Page Scan Window >> >> >> > > >> > + 0x0003 BR/EDR Inquiry Scan Type >> >> >> > > >> > + 0x0004 BR/EDR Inquiry Scan Interval >> >> >> > > >> > + 0x0005 BR/EDR Inquiry Scan Window >> >> >> > > >> > + 0x0006 BR/EDR Link Supervision Timeout >> >> >> > > >> > + 0x0007 BR/EDR Page Timeout >> >> >> > > >> > + 0x0008 BR/EDR Min Sniff Interval >> >> >> > > >> > + 0x0009 BR/EDR Max Sniff Interval >> >> >> > > >> > + 0x000a LE Advertisement Min Interval >> >> >> > > >> > + 0x000b LE Advertisement Max Interval >> >> >> > > >> > + 0x000c LE Multi Advertisement Rotation Interval >> >> >> > > >> > + 0x000d LE Scanning Interval for auto connect >> >> >> > > >> > + 0x000e LE Scanning Window for auto connect >> >> >> > > >> > + 0x000f LE Scanning Interval for HID only >> >> >> > > >> > + 0x0010 LE Scanning Window for HID only >> >> >> > > >> >> >> >> > > >> I remember commenting that we don't have profile information on the >> >> >> > > >> kernel so Im not sure how you are planning to detect the when the >> >> >> > > >> device is HID or not? >> >> >> > > > >> >> >> > > > I expect we'll need to add an Add Device flag to carry that information down into the kernel. The hid profile already sends an op, so it's relatively trivial to carry that information in so we can apply specific scanning requirements for that case (which are less aggressive and therefore have less of an impact to Wifi and BT performance). >> >> >> > > >> >> >> > > Well if we will need to feed that information of the profile type we >> >> >> > > might as well just feed the intervals directly, that way any profile >> >> >> > > that needs some different parameters than the default can all use the >> >> >> > > same command and we don't have to grow this list when a new profile >> >> >> > > want to use different parameters. >> >> >> > > >> >> >> > That might be another option indeed. I wonder how far you'd want to >> >> >> > take this to have the profile provide all the values. At some point, >> >> >> > you'd need some logic that would pick the value that meets all the >> >> >> > profile requirements so if one wants w:100, i:200 and another wants >> >> >> > w:200: i400, you may need to scan at 100% to meet the requirements of >> >> >> > all profiles... I think that with the current proposal, while less >> >> >> > flexible, may avoid this complexity/condition.. >> >> >> >> >> >> Not sure I follow you here, what I had in mind was that the profile >> >> >> provides its own settings for scanning but perhaps you are saying that >> >> >> in case there are multiple profiles involved we would have to >> >> >> aggregate the parameters, well that has to be done either way even if >> >> >> we use simple types, in which case there can be multiple defaults (one >> >> >> for each profile) that the kernel must aggregate or we do aggregate >> >> >> them at userspace and just provide the end result. In the end I guess >> >> >> this means that the connect scanning parameters should probably be per >> >> >> device rather than a using a globals with per profile exceptions, much >> >> >> like connection parameters are per device as well. >> >> > >> >> > >> >> > You got the idea. Aggregation would be needed, but with simple types, we can have simple logic such as if only hid is added (via the flag, we use the smaller duty cycle provided by the hid parameters defined in this patch), else, we use the passive scanning parameters as we do today. In essence, with this logic, no aggregation of settings is necessary since it is up to the platform who set the various values via their .conf file. >> >> >> >> Well you will need to know when to apply the hid params, so to me it >> >> still seems a per device policy, what Im missing? >> > >> > It's effectively passive scanning based on what requested it. >> >> >> >> >> >> > Scan parameters are global, they can't be per connection like the connection parameters. >> >> >> >> Not when you are scanning to connect to specifica device, perhaps you >> >> want to expand on where each scanning parameter set takes place then. >> > >> > >> > Today, it's all passive scanning. This would introduce the concept of hid only passive scanning where we can have a lower scanning duty cycle and save bandwidth and power. >> >> So the intend is to switch passive scanning 'modes', perhaps Im >> missing an API or policy to do that, or is the indend to do this >> automagically? It is a little bit hard to follow given that a system >> can have many different peripherals, each with different scanning >> requirements, or the idea is to apply HID mode only if there are HID >> devices paired? >> >> Yes, the idea is to use a hid only mode if there are only hid devices. Note that there is a precedent for this already (see suspend mode that was recently added). > > >> >> >> >> >> >> >> >> >> >> >> > > >> >> >> >> > > >> >> >> >> > > >> > + 0x0012 LE Scanning Interval for wake scenarios >> >> >> > > >> > + 0x0013 LE Scanning Window for wake scenarios >> >> >> > > >> > + 0x0014 LE Scanning Interval for discovery >> >> >> > > >> > + 0x0015 LE Scanning Window for discovery >> >> >> > > >> > + 0x0016 LE Scanning Interval for adv monitoring >> >> >> > > >> > + 0x0017 LE Scanning Window for adv monitoring >> >> >> > > >> > + 0x0018 LE Scanning Interval for connect >> >> >> > > >> > + 0x0019 LE Scanning Window for connect >> >> >> > > >> > + 0x001a LE Min Connection Interval >> >> >> > > >> > + 0x001b LE Max Connection Interval >> >> >> > > >> > + 0x001c LE Connection Connection Latency >> >> >> > > >> > + 0x001d LE Connection Supervision Timeout >> >> >> > > >> > + >> >> >> > > >> > + This command can be used when the controller is not powered and >> >> >> > > >> > + all settings will be programmed once powered. Note that these only >> >> >> > > >> > + control the default parameters. Higher level Apis may influence the >> >> >> > > >> > + effective value used. >> >> >> > > >> > + >> >> >> > > >> > + This command generates a Command Complete event on success or >> >> >> > > >> > + a Command Status event on failure. >> >> >> > > >> > + >> >> >> > > >> > + Possible errors: Invalid Parameters >> >> >> > > >> > + Invalid Index >> >> >> > > >> > + >> >> >> > > >> > + >> >> >> > > >> > Command Complete Event >> >> >> > > >> > ====================== >> >> >> > > >> > >> >> >> > > >> > -- >> >> >> > > >> > 2.26.2.761.g0e0b3e54be-goog >> >> >> > > >> > >> >> >> > > >> >> >> >> > > >> >> >> >> > > >> -- >> >> >> > > >> Luiz Augusto von Dentz >> >> >> > > >> >> >> > > >> >> >> > > >> >> >> > > -- >> >> >> > > Luiz Augusto von Dentz >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> >> Luiz Augusto von Dentz >> >> >> >> >> >> >> >> -- >> >> Luiz Augusto von Dentz >> >> >> >> -- >> Luiz Augusto von Dentz
diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt index 6ee01fed8..c6575e654 100644 --- a/doc/mgmt-api.txt +++ b/doc/mgmt-api.txt @@ -3223,6 +3223,68 @@ Set Experimental Feature Command Invalid Index +Load Default Controller Parameter Command +============================= + + Command Code: 0x004b + Controller Index: <controller id> + Command Parameters: Parameter_Count (2 Octets) + Parameter1 { + Parameter_Type (2 Octet) + Value_Length (1 Octet) + Value (0-255 Octets) + } + Parameter2 { } + ... + Return Parameters: + + This command is used to feed the kernel a list of default controller + parameters. + + Currently defined Parameter_Type values are: + + 0x0000 BR/EDR Page Scan Type + 0x0001 BR/EDR Page Scan Interval + 0x0002 BR/EDR Page Scan Window + 0x0003 BR/EDR Inquiry Scan Type + 0x0004 BR/EDR Inquiry Scan Interval + 0x0005 BR/EDR Inquiry Scan Window + 0x0006 BR/EDR Link Supervision Timeout + 0x0007 BR/EDR Page Timeout + 0x0008 BR/EDR Min Sniff Interval + 0x0009 BR/EDR Max Sniff Interval + 0x000a LE Advertisement Min Interval + 0x000b LE Advertisement Max Interval + 0x000c LE Multi Advertisement Rotation Interval + 0x000d LE Scanning Interval for auto connect + 0x000e LE Scanning Window for auto connect + 0x000f LE Scanning Interval for HID only + 0x0010 LE Scanning Window for HID only + 0x0012 LE Scanning Interval for wake scenarios + 0x0013 LE Scanning Window for wake scenarios + 0x0014 LE Scanning Interval for discovery + 0x0015 LE Scanning Window for discovery + 0x0016 LE Scanning Interval for adv monitoring + 0x0017 LE Scanning Window for adv monitoring + 0x0018 LE Scanning Interval for connect + 0x0019 LE Scanning Window for connect + 0x001a LE Min Connection Interval + 0x001b LE Max Connection Interval + 0x001c LE Connection Connection Latency + 0x001d LE Connection Supervision Timeout + + This command can be used when the controller is not powered and + all settings will be programmed once powered. Note that these only + control the default parameters. Higher level Apis may influence the + effective value used. + + This command generates a Command Complete event on success or + a Command Status event on failure. + + Possible errors: Invalid Parameters + Invalid Index + + Command Complete Event ======================