| Message ID | 20200608192701.18355-6-nsaenzjulienne@suse.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Raspberry Pi 4 USB firmware initialization rework | expand |
On 6/8/2020 12:26 PM, Nicolas Saenz Julienne wrote: > Some atypical users of xhci-pci might need to manually reset their xHCI > controller before starting the HCD setup. Check if a reset controller > device is available to the PCI bus and trigger a reset. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > --- > drivers/usb/host/xhci-pci.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c > index ef513c2fb843..45f70facdfcd 100644 > --- a/drivers/usb/host/xhci-pci.c > +++ b/drivers/usb/host/xhci-pci.c > @@ -12,6 +12,7 @@ > #include <linux/slab.h> > #include <linux/module.h> > #include <linux/acpi.h> > +#include <linux/reset.h> > > #include "xhci.h" > #include "xhci-trace.h" > @@ -339,6 +340,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) > struct xhci_hcd *xhci; > struct usb_hcd *hcd; > struct xhci_driver_data *driver_data; > + struct reset_control *reset; > > driver_data = (struct xhci_driver_data *)id->driver_data; > if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) { > @@ -347,6 +349,13 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) > return retval; > } > > + reset = devm_reset_control_get(&dev->bus->dev, NULL); Should not this be devm_reset_control_get_optional()? > + if (IS_ERR(reset)) { > + retval = PTR_ERR(reset); > + return retval; > + } > + reset_control_reset(reset); > + > /* Prevent runtime suspending between USB-2 and USB-3 initialization */ > pm_runtime_get_noresume(&dev->dev); > >
Hi Florian, thanks for the reviews! On Mon, 2020-06-08 at 12:43 -0700, Florian Fainelli wrote: > > On 6/8/2020 12:26 PM, Nicolas Saenz Julienne wrote: > > Some atypical users of xhci-pci might need to manually reset their xHCI > > controller before starting the HCD setup. Check if a reset controller > > device is available to the PCI bus and trigger a reset. > > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > --- > > drivers/usb/host/xhci-pci.c | 9 +++++++++ > > 1 file changed, 9 insertions(+) > > > > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c > > index ef513c2fb843..45f70facdfcd 100644 > > --- a/drivers/usb/host/xhci-pci.c > > +++ b/drivers/usb/host/xhci-pci.c > > @@ -12,6 +12,7 @@ > > #include <linux/slab.h> > > #include <linux/module.h> > > #include <linux/acpi.h> > > +#include <linux/reset.h> > > > > #include "xhci.h" > > #include "xhci-trace.h" > > @@ -339,6 +340,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const > > struct pci_device_id *id) > > struct xhci_hcd *xhci; > > struct usb_hcd *hcd; > > struct xhci_driver_data *driver_data; > > + struct reset_control *reset; > > > > driver_data = (struct xhci_driver_data *)id->driver_data; > > if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) { > > @@ -347,6 +349,13 @@ static int xhci_pci_probe(struct pci_dev *dev, const > > struct pci_device_id *id) > > return retval; > > } > > > > + reset = devm_reset_control_get(&dev->bus->dev, NULL); > > Should not this be devm_reset_control_get_optional()? Yes, you're right. Regards, Nicolas > > + if (IS_ERR(reset)) { > > + retval = PTR_ERR(reset); > > + return retval; > > + } > > + reset_control_reset(reset); > > + > > /* Prevent runtime suspending between USB-2 and USB-3 initialization */ > > pm_runtime_get_noresume(&dev->dev); > > > >
On Mon, 2020-06-08 at 22:44 +0300, Andy Shevchenko wrote: > > > On Monday, June 8, 2020, Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > wrote: > > Some atypical users of xhci-pci might need to manually reset their xHCI > > controller before starting the HCD setup. Check if a reset controller > > device is available to the PCI bus and trigger a reset. > > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > --- > > drivers/usb/host/xhci-pci.c | 9 +++++++++ > > 1 file changed, 9 insertions(+) > > > > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c > > index ef513c2fb843..45f70facdfcd 100644 > > --- a/drivers/usb/host/xhci-pci.c > > +++ b/drivers/usb/host/xhci-pci.c > > @@ -12,6 +12,7 @@ > > #include <linux/slab.h> > > #include <linux/module.h> > > #include <linux/acpi.h> > > +#include <linux/reset.h> > > > > #include "xhci.h" > > #include "xhci-trace.h" > > @@ -339,6 +340,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const > > struct pci_device_id *id) > > struct xhci_hcd *xhci; > > struct usb_hcd *hcd; > > struct xhci_driver_data *driver_data; > > + struct reset_control *reset; > > > > driver_data = (struct xhci_driver_data *)id->driver_data; > > if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) { > > @@ -347,6 +349,13 @@ static int xhci_pci_probe(struct pci_dev *dev, const > > struct pci_device_id *id) > > return retval; > > } > > > > + reset = devm_reset_control_get(&dev->bus->dev, NULL); > > > > + if (IS_ERR(reset)) { > > + retval = PTR_ERR(reset); > > + return retval; > > + } > > These four can be two, we have too many LOCs in the kernel for no reason. Noted > > > + reset_control_reset(reset); > > + > > /* Prevent runtime suspending between USB-2 and USB-3 initialization > > */ > > pm_runtime_get_noresume(&dev->dev); > > > > -- > > 2.26.2 > > > > > >
Hi Nicolas, On Tue, 2020-06-09 at 13:18 +0200, Nicolas Saenz Julienne wrote: > Hi Florian, thanks for the reviews! > > On Mon, 2020-06-08 at 12:43 -0700, Florian Fainelli wrote: > > On 6/8/2020 12:26 PM, Nicolas Saenz Julienne wrote: > > > Some atypical users of xhci-pci might need to manually reset their xHCI > > > controller before starting the HCD setup. Check if a reset controller > > > device is available to the PCI bus and trigger a reset. > > > > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > > --- > > > drivers/usb/host/xhci-pci.c | 9 +++++++++ > > > 1 file changed, 9 insertions(+) > > > > > > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c > > > index ef513c2fb843..45f70facdfcd 100644 > > > --- a/drivers/usb/host/xhci-pci.c > > > +++ b/drivers/usb/host/xhci-pci.c [...] > > > @@ -347,6 +349,13 @@ static int xhci_pci_probe(struct pci_dev *dev, const > > > struct pci_device_id *id) > > > return retval; > > > } > > > > > > + reset = devm_reset_control_get(&dev->bus->dev, NULL); > > > > Should not this be devm_reset_control_get_optional()? > > Yes, you're right. Please use devm_reset_control_get_optional_exclusive() while you're at it. regards Philipp
On Tue, 2020-06-09 at 13:59 +0200, Philipp Zabel wrote: > Hi Nicolas, > > > > On Tue, 2020-06-09 at 13:18 +0200, Nicolas Saenz Julienne wrote: > > > Hi Florian, thanks for the reviews! > > On Mon, 2020-06-08 at 12:43 -0700, Florian Fainelli wrote: > > > On 6/8/2020 12:26 PM, Nicolas Saenz Julienne wrote: > > > > Some atypical users of xhci-pci might need to manually reset their xHCI > > > > controller before starting the HCD setup. Check if a reset controller > > > > device is available to the PCI bus and trigger a reset. > > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > > > --- > > > > drivers/usb/host/xhci-pci.c | 9 +++++++++ > > > > 1 file changed, 9 insertions(+) > > > > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c > > > > index ef513c2fb843..45f70facdfcd 100644 > > > > --- a/drivers/usb/host/xhci-pci.c > > > > +++ b/drivers/usb/host/xhci-pci.c > > [...] > > > > > @@ -347,6 +349,13 @@ static int xhci_pci_probe(struct pci_dev *dev, > > > > const > > > > struct pci_device_id *id) > > > > return retval; > > > > } > > > > > > > > + reset = devm_reset_control_get(&dev->bus->dev, NULL); > > > Should not this be devm_reset_control_get_optional()? > > Yes, you're right. > > > Please use devm_reset_control_get_optional_exclusive() while you're at > > it. > Will do! Regards, Nicolas
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ef513c2fb843..45f70facdfcd 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -12,6 +12,7 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/acpi.h> +#include <linux/reset.h> #include "xhci.h" #include "xhci-trace.h" @@ -339,6 +340,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) struct xhci_hcd *xhci; struct usb_hcd *hcd; struct xhci_driver_data *driver_data; + struct reset_control *reset; driver_data = (struct xhci_driver_data *)id->driver_data; if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) { @@ -347,6 +349,13 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) return retval; } + reset = devm_reset_control_get(&dev->bus->dev, NULL); + if (IS_ERR(reset)) { + retval = PTR_ERR(reset); + return retval; + } + reset_control_reset(reset); + /* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume(&dev->dev);
Some atypical users of xhci-pci might need to manually reset their xHCI controller before starting the HCD setup. Check if a reset controller device is available to the PCI bus and trigger a reset. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> --- drivers/usb/host/xhci-pci.c | 9 +++++++++ 1 file changed, 9 insertions(+)