diff mbox series

[v2,5/9] usb: xhci-pci: Add support for reset controllers

Message ID 20200609175003.19793-6-nsaenzjulienne@suse.de (mailing list archive)
State New, archived
Headers show
Series Raspberry Pi 4 USB firmware initialization rework | expand

Commit Message

Nicolas Saenz Julienne June 9, 2020, 5:49 p.m. UTC 
Some atypical users of xhci-pci might need to manually reset their xHCI
controller before starting the HCD setup. Check if a reset controller
device is available to the PCI bus and trigger a reset.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

---

Changes since v1:
 - Use proper reset API
 - Make code simpler

 drivers/usb/host/xhci-pci.c | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Florian Fainelli June 9, 2020, 6:13 p.m. UTC | #1 
On 6/9/2020 10:49 AM, Nicolas Saenz Julienne wrote:
> Some atypical users of xhci-pci might need to manually reset their xHCI
> controller before starting the HCD setup. Check if a reset controller
> device is available to the PCI bus and trigger a reset.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> 
> ---
> 
> Changes since v1:
>  - Use proper reset API
>  - Make code simpler
> 
>  drivers/usb/host/xhci-pci.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index ef513c2fb843..6e96affa4ceb 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -12,6 +12,7 @@
>  #include <linux/slab.h>
>  #include <linux/module.h>
>  #include <linux/acpi.h>
> +#include <linux/reset.h>
>  
>  #include "xhci.h"
>  #include "xhci-trace.h"
> @@ -339,6 +340,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
>  	struct xhci_hcd *xhci;
>  	struct usb_hcd *hcd;
>  	struct xhci_driver_data *driver_data;
> +	struct reset_control *reset;
>  
>  	driver_data = (struct xhci_driver_data *)id->driver_data;
>  	if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
> @@ -347,6 +349,11 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
>  			return retval;
>  	}
>  
> +	reset = devm_reset_control_get_optional_exclusive(&dev->bus->dev, NULL);
> +	if (IS_ERR(reset))
> +		return PTR_ERR(reset);
> +	reset_control_reset(reset);

Sorry for not catching this earlier, since this is a generic integration
with the reset controller API, should not you also add a
reset_control_reset() to hcd_pci_resume() for symmetry?

> +
>  	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
>  	pm_runtime_get_noresume(&dev->dev);
>  
>
Nicolas Saenz Julienne June 10, 2020, 3:49 p.m. UTC | #2 
Hi Florian,

On Tue, 2020-06-09 at 11:13 -0700, Florian Fainelli wrote:
> 
> On 6/9/2020 10:49 AM, Nicolas Saenz Julienne wrote:
> > Some atypical users of xhci-pci might need to manually reset their xHCI
> > controller before starting the HCD setup. Check if a reset controller
> > device is available to the PCI bus and trigger a reset.
> > 
> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > 
> > ---
> > 
> > Changes since v1:
> >  - Use proper reset API
> >  - Make code simpler
> > 
> >  drivers/usb/host/xhci-pci.c | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> > index ef513c2fb843..6e96affa4ceb 100644
> > --- a/drivers/usb/host/xhci-pci.c
> > +++ b/drivers/usb/host/xhci-pci.c
> > @@ -12,6 +12,7 @@
> >  #include <linux/slab.h>
> >  #include <linux/module.h>
> >  #include <linux/acpi.h>
> > +#include <linux/reset.h>
> >  
> >  #include "xhci.h"
> >  #include "xhci-trace.h"
> > @@ -339,6 +340,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const
> > struct pci_device_id *id)
> >  	struct xhci_hcd *xhci;
> >  	struct usb_hcd *hcd;
> >  	struct xhci_driver_data *driver_data;
> > +	struct reset_control *reset;
> >  
> >  	driver_data = (struct xhci_driver_data *)id->driver_data;
> >  	if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
> > @@ -347,6 +349,11 @@ static int xhci_pci_probe(struct pci_dev *dev, const
> > struct pci_device_id *id)
> >  			return retval;
> >  	}
> >  
> > +	reset = devm_reset_control_get_optional_exclusive(&dev->bus->dev, NULL);
> > +	if (IS_ERR(reset))
> > +		return PTR_ERR(reset);
> > +	reset_control_reset(reset);
> 
> Sorry for not catching this earlier, since this is a generic integration
> with the reset controller API, should not you also add a
> reset_control_reset() to hcd_pci_resume() for symmetry?

Agreed, if the RPi4 supported suspend/resume, which AFAIK doesn't, an extra
reset would be needed as pcie-brcmstb performs a fundamental reset on resume
forcing us to reinitialize vl805.

Thanks!
Nicolas
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ef513c2fb843..6e96affa4ceb 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -12,6 +12,7 @@ 
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/acpi.h>
+#include <linux/reset.h>
 
 #include "xhci.h"
 #include "xhci-trace.h"
@@ -339,6 +340,7 @@  static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	struct xhci_hcd *xhci;
 	struct usb_hcd *hcd;
 	struct xhci_driver_data *driver_data;
+	struct reset_control *reset;
 
 	driver_data = (struct xhci_driver_data *)id->driver_data;
 	if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
@@ -347,6 +349,11 @@  static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 			return retval;
 	}
 
+	reset = devm_reset_control_get_optional_exclusive(&dev->bus->dev, NULL);
+	if (IS_ERR(reset))
+		return PTR_ERR(reset);
+	reset_control_reset(reset);
+
 	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
 	pm_runtime_get_noresume(&dev->dev);