@@ -25,9 +25,9 @@
};
leds {
- pinctrl-0 = <&led_pins_module>, <&led_sd_haikou>;
+ pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>;
- sd-card-led {
+ sd_card_led: led-3 {
label = "sd_card_led";
gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
@@ -118,7 +118,7 @@
};
leds {
- led_sd_haikou: led-sd-gpio {
+ sd_card_led_pin: sd-card-led-pin {
rockchip,pins =
<0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -76,16 +76,16 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&led_pins_module>;
+ pinctrl-0 = <&module_led_pins>;
- module_led1 {
+ module_led1: led-1 {
label = "module_led1";
gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
panic-indicator;
};
- module_led2 {
+ module_led2: led-2 {
label = "module_led2";
gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
default-state = "off";
@@ -270,7 +270,7 @@
&pinctrl {
leds {
- led_pins_module: led-module-gpio {
+ module_led_pins: module-led-pins {
rockchip,pins =
<2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -141,15 +141,15 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>;
+ pinctrl-0 = <&sys_led_pin>, <&user_led_pin>;
- sys-led {
+ sys_led: led-0 {
label = "sys_led";
linux,default-trigger = "heartbeat";
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
};
- user-led {
+ user_led: led-1 {
label = "user_led";
default-state = "off";
gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
@@ -586,11 +586,11 @@
};
leds {
- sys_led_gpio: sys_led-gpio {
+ sys_led_pin: sys-led-pin {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led_gpio: user_led-gpio {
+ user_led_pin: user-led-pin {
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -117,9 +117,9 @@
leds: gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&leds_gpio>;
+ pinctrl-0 = <&status_led_pin>;
- status {
+ status_led: led-0 {
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
label = "status_led";
linux,default-trigger = "heartbeat";
@@ -520,7 +520,7 @@
};
gpio-leds {
- leds_gpio: leds-gpio {
+ status_led_pin: status-led-pin {
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -15,9 +15,9 @@
};
leds {
- pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>;
+ pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
- sd-card-led {
+ sd_card_led: led-1 {
label = "sd_card_led";
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
@@ -179,7 +179,7 @@
};
leds {
- led_sd_haikou: led-sd-gpio {
+ sd_card_led_pin: sd-card-led-pin {
rockchip,pins =
<1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -11,9 +11,9 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&led_pin_module>;
+ pinctrl-0 = <&module_led_pin>;
- module-led {
+ module_led: led-0 {
label = "module_led";
gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -450,7 +450,7 @@
};
leds {
- led_pin_module: led-module-gpio {
+ module_led_pin: module-led-pin {
rockchip,pins =
<2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -61,23 +61,23 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
+ pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>;
- work-led {
+ work_led: led-0 {
label = "green:work";
gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
- diy-led {
+ diy_led: led-1 {
label = "red:diy";
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc1";
};
- yellow-led {
+ yellow_led: led-2 {
label = "yellow:yellow-led";
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
default-state = "off";
@@ -595,15 +595,15 @@
};
leds {
- diy_led_gpio: diy_led-gpio {
+ diy_led_pin: diy-led-pin {
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
- work_led_gpio: work_led-gpio {
+ work_led_pin: work-led-pin {
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
- yellow_led_gpio: yellow_led-gpio {
+ yellow_led_pin: yellow-led-pin {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -39,15 +39,15 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+ pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
- work-led {
+ work_led: led-0 {
label = "work";
default-state = "on";
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
};
- diy-led {
+ diy_led: led-1 {
label = "diy";
default-state = "off";
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
@@ -588,11 +588,11 @@
};
leds {
- work_led_gpio: work_led-gpio {
+ work_led_pin: work-led-pin {
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
- diy_led_gpio: diy_led-gpio {
+ diy_led_pin: diy-led-pin {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
Current dts files with 'gpio-led' nodes were manually verified. In order to automate this process leds-gpio.txt has been converted to yaml. With this conversion a check for pattern properties was added. In part 2 rename and label gpio-led subnodes that passed the regex, but still don't have the preferred form. Any pin subnode that ends with '-gpio' in the pinctrl node generates a warning. Fix with help of the following rules: 1: Add nodename in the preferred form. 2: Always add a label that ends with '_led' to prevent conflicts with other labels such as 'power' and 'mmc' 3: If leds need pinctrl add a label that ends with '_led_pin' also to prevent conflicts with other labels. patternProperties: # The first form is preferred, but fall back to just 'led' # anywhere in the node name to at least catch some child nodes. "(^led-[0-9a-f]$|led)": make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/ leds-gpio.yaml make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/ schemas/gpio/gpio.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts | 6 +++--- arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 8 ++++---- arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi | 10 +++++----- arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 6 +++--- arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 6 +++--- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 6 +++--- arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 14 +++++++------- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 10 +++++----- 8 files changed, 33 insertions(+), 33 deletions(-)