diff mbox series

[4/6] usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle

Message ID 20200525025049.3400-5-b-liu@ti.com (mailing list archive)
State Mainlined
Commit 402bcac4b25b520c89ba60db85eb6316f36e797f
Headers show
Series musb patches for v5.8-rc1 | expand

Commit Message

Bin Liu May 25, 2020, 2:50 a.m. UTC 
From: Macpaul Lin <macpaul.lin@mediatek.com>

When receiving reset interrupt, FADDR need to be reset to zero in
peripheral mode. Otherwise ep0 cannot do enumeration when re-plugging USB
cable.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Acked-by: Min Guo <min.guo@mediatek.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
---
 drivers/usb/musb/mediatek.c | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Macpaul Lin June 17, 2020, 8:17 a.m. UTC | #1 
Bin Liu <b-liu@ti.com> 於 2020年5月25日 週一 上午10:53寫道：
>
> From: Macpaul Lin <macpaul.lin@mediatek.com>
>
> When receiving reset interrupt, FADDR need to be reset to zero in
> peripheral mode. Otherwise ep0 cannot do enumeration when re-plugging USB
> cable.
>
> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
> Acked-by: Min Guo <min.guo@mediatek.com>
> Signed-off-by: Bin Liu <b-liu@ti.com>
> ---
>  drivers/usb/musb/mediatek.c | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/drivers/usb/musb/mediatek.c b/drivers/usb/musb/mediatek.c
> index 6196b0e8d77d..eebeadd26946 100644
> --- a/drivers/usb/musb/mediatek.c
> +++ b/drivers/usb/musb/mediatek.c
> @@ -208,6 +208,12 @@ static irqreturn_t generic_interrupt(int irq, void *__hci)
>         musb->int_rx = musb_clearw(musb->mregs, MUSB_INTRRX);
>         musb->int_tx = musb_clearw(musb->mregs, MUSB_INTRTX);
>
> +       if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) {
> +               /* ep0 FADDR must be 0 when (re)entering peripheral mode */
> +               musb_ep_select(musb->mregs, 0);
> +               musb_writeb(musb->mregs, MUSB_FADDR, 0);
> +       }
> +
>         if (musb->int_usb || musb->int_tx || musb->int_rx)
>                 retval = musb_interrupt(musb);
>
> --
> 2.17.1
>
Could this bug fix also been applied to stable kernel?
Thanks!

Best regards,
Macpaul Lin
Greg Kroah-Hartman June 17, 2020, 8:58 a.m. UTC | #2 
On Wed, Jun 17, 2020 at 04:17:07PM +0800, Macpaul Lin wrote:
> Bin Liu <b-liu@ti.com> 於 2020年5月25日 週一 上午10:53寫道：
> >
> > From: Macpaul Lin <macpaul.lin@mediatek.com>
> >
> > When receiving reset interrupt, FADDR need to be reset to zero in
> > peripheral mode. Otherwise ep0 cannot do enumeration when re-plugging USB
> > cable.
> >
> > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
> > Acked-by: Min Guo <min.guo@mediatek.com>
> > Signed-off-by: Bin Liu <b-liu@ti.com>
> > ---
> >  drivers/usb/musb/mediatek.c | 6 ++++++
> >  1 file changed, 6 insertions(+)
> >
> > diff --git a/drivers/usb/musb/mediatek.c b/drivers/usb/musb/mediatek.c
> > index 6196b0e8d77d..eebeadd26946 100644
> > --- a/drivers/usb/musb/mediatek.c
> > +++ b/drivers/usb/musb/mediatek.c
> > @@ -208,6 +208,12 @@ static irqreturn_t generic_interrupt(int irq, void *__hci)
> >         musb->int_rx = musb_clearw(musb->mregs, MUSB_INTRRX);
> >         musb->int_tx = musb_clearw(musb->mregs, MUSB_INTRTX);
> >
> > +       if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) {
> > +               /* ep0 FADDR must be 0 when (re)entering peripheral mode */
> > +               musb_ep_select(musb->mregs, 0);
> > +               musb_writeb(musb->mregs, MUSB_FADDR, 0);
> > +       }
> > +
> >         if (musb->int_usb || musb->int_tx || musb->int_rx)
> >                 retval = musb_interrupt(musb);
> >
> > --
> > 2.17.1
> >
> Could this bug fix also been applied to stable kernel?

Sure, what is the git commit of it in Linus's tree?

thanks,

greg k-h
Macpaul Lin June 17, 2020, 9:31 a.m. UTC | #3 
On Wed, 2020-06-17 at 10:58 +0200, Greg Kroah-Hartman wrote:
> On Wed, Jun 17, 2020 at 04:17:07PM +0800, Macpaul Lin wrote:
> > Bin Liu <b-liu@ti.com> 於 2020年5月25日 週一 上午10:53寫道：
> > >
> > > From: Macpaul Lin <macpaul.lin@mediatek.com>
> > >
> > > When receiving reset interrupt, FADDR need to be reset to zero in
> > > peripheral mode. Otherwise ep0 cannot do enumeration when re-plugging USB
> > > cable.
> > >
> > > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
> > > Acked-by: Min Guo <min.guo@mediatek.com>
> > > Signed-off-by: Bin Liu <b-liu@ti.com>
> > > ---
> > >  drivers/usb/musb/mediatek.c | 6 ++++++
> > >  1 file changed, 6 insertions(+)
> > >
> > > diff --git a/drivers/usb/musb/mediatek.c b/drivers/usb/musb/mediatek.c
> > > index 6196b0e8d77d..eebeadd26946 100644
> > > --- a/drivers/usb/musb/mediatek.c
> > > +++ b/drivers/usb/musb/mediatek.c
> > > @@ -208,6 +208,12 @@ static irqreturn_t generic_interrupt(int irq, void *__hci)
> > >         musb->int_rx = musb_clearw(musb->mregs, MUSB_INTRRX);
> > >         musb->int_tx = musb_clearw(musb->mregs, MUSB_INTRTX);
> > >
> > > +       if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) {
> > > +               /* ep0 FADDR must be 0 when (re)entering peripheral mode */
> > > +               musb_ep_select(musb->mregs, 0);
> > > +               musb_writeb(musb->mregs, MUSB_FADDR, 0);
> > > +       }
> > > +
> > >         if (musb->int_usb || musb->int_tx || musb->int_rx)
> > >                 retval = musb_interrupt(musb);
> > >
> > > --
> > > 2.17.1
> > >
> > Could this bug fix also been applied to stable kernel?
> 
> Sure, what is the git commit of it in Linus's tree?
> 
> thanks,
> 
> greg k-h

The commit id of this patch should be
402bcac4b25b520c89ba60db85eb6316f36e797f

Thank you very much.

BR
Macpaul Lin
Greg Kroah-Hartman June 19, 2020, 8:51 a.m. UTC | #4 
On Wed, Jun 17, 2020 at 05:31:57PM +0800, Macpaul Lin wrote:
> On Wed, 2020-06-17 at 10:58 +0200, Greg Kroah-Hartman wrote:
> > On Wed, Jun 17, 2020 at 04:17:07PM +0800, Macpaul Lin wrote:
> > > Bin Liu <b-liu@ti.com> 於 2020年5月25日 週一 上午10:53寫道：
> > > >
> > > > From: Macpaul Lin <macpaul.lin@mediatek.com>
> > > >
> > > > When receiving reset interrupt, FADDR need to be reset to zero in
> > > > peripheral mode. Otherwise ep0 cannot do enumeration when re-plugging USB
> > > > cable.
> > > >
> > > > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
> > > > Acked-by: Min Guo <min.guo@mediatek.com>
> > > > Signed-off-by: Bin Liu <b-liu@ti.com>
> > > > ---
> > > >  drivers/usb/musb/mediatek.c | 6 ++++++
> > > >  1 file changed, 6 insertions(+)
> > > >
> > > > diff --git a/drivers/usb/musb/mediatek.c b/drivers/usb/musb/mediatek.c
> > > > index 6196b0e8d77d..eebeadd26946 100644
> > > > --- a/drivers/usb/musb/mediatek.c
> > > > +++ b/drivers/usb/musb/mediatek.c
> > > > @@ -208,6 +208,12 @@ static irqreturn_t generic_interrupt(int irq, void *__hci)
> > > >         musb->int_rx = musb_clearw(musb->mregs, MUSB_INTRRX);
> > > >         musb->int_tx = musb_clearw(musb->mregs, MUSB_INTRTX);
> > > >
> > > > +       if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) {
> > > > +               /* ep0 FADDR must be 0 when (re)entering peripheral mode */
> > > > +               musb_ep_select(musb->mregs, 0);
> > > > +               musb_writeb(musb->mregs, MUSB_FADDR, 0);
> > > > +       }
> > > > +
> > > >         if (musb->int_usb || musb->int_tx || musb->int_rx)
> > > >                 retval = musb_interrupt(musb);
> > > >
> > > > --
> > > > 2.17.1
> > > >
> > > Could this bug fix also been applied to stable kernel?
> > 
> > Sure, what is the git commit of it in Linus's tree?
> > 
> > thanks,
> > 
> > greg k-h
> 
> The commit id of this patch should be
> 402bcac4b25b520c89ba60db85eb6316f36e797f

Now queued up, thanks.

greg k-h
diff mbox series

Patch

diff --git a/drivers/usb/musb/mediatek.c b/drivers/usb/musb/mediatek.c
index 6196b0e8d77d..eebeadd26946 100644
--- a/drivers/usb/musb/mediatek.c
+++ b/drivers/usb/musb/mediatek.c
@@ -208,6 +208,12 @@  static irqreturn_t generic_interrupt(int irq, void *__hci)
 	musb->int_rx = musb_clearw(musb->mregs, MUSB_INTRRX);
 	musb->int_tx = musb_clearw(musb->mregs, MUSB_INTRTX);
 
+	if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) {
+		/* ep0 FADDR must be 0 when (re)entering peripheral mode */
+		musb_ep_select(musb->mregs, 0);
+		musb_writeb(musb->mregs, MUSB_FADDR, 0);
+	}
+
 	if (musb->int_usb || musb->int_tx || musb->int_rx)
 		retval = musb_interrupt(musb);