| Message ID | 1589956216-22499-1-git-send-email-Anson.Huang@nxp.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 915e19686f5991bf6dd9160ef6830041083c894f |
| Headers | show |
| Series | ARM: dts: imx: Make tempmon node as child of anatop node | expand |
> From: Anson Huang <Anson.Huang@nxp.com> > Sent: Wednesday, May 20, 2020 2:30 PM > > i.MX6/7 SoCs' temperature sensor is inside anatop module from HW perspective, > so it should be a child node of anatop. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> BTW, I think you also need a binding doc for this change. Regards Aisheng > --- > arch/arm/boot/dts/imx6qdl.dtsi | 22 +++++++++++----------- > arch/arm/boot/dts/imx6sl.dtsi | 20 ++++++++++---------- > arch/arm/boot/dts/imx6sll.dtsi | 20 ++++++++++---------- > arch/arm/boot/dts/imx6sx.dtsi | 20 ++++++++++---------- > arch/arm/boot/dts/imx6ul.dtsi | 20 ++++++++++---------- > arch/arm/boot/dts/imx7s.dtsi | 20 ++++++++++---------- > 6 files changed, 61 insertions(+), 61 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi > index 39d4afd..43d44d5 100644 > --- a/arch/arm/boot/dts/imx6qdl.dtsi > +++ b/arch/arm/boot/dts/imx6qdl.dtsi > @@ -69,17 +69,6 @@ > }; > }; > > - tempmon: tempmon { > - compatible = "fsl,imx6q-tempmon"; > - interrupt-parent = <&gpc>; > - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; > - fsl,tempmon = <&anatop>; > - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; > - nvmem-cell-names = "calib", "temp_grade"; > - clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; > - #thermal-sensor-cells = <0>; > - }; > - > ldb: ldb { > #address-cells = <1>; > #size-cells = <0>; > @@ -795,6 +784,17 @@ > anatop-min-voltage = <725000>; > anatop-max-voltage = <1450000>; > }; > + > + tempmon: tempmon { > + compatible = "fsl,imx6q-tempmon"; > + interrupt-parent = <&gpc>; > + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; > + fsl,tempmon = <&anatop>; > + nvmem-cells = <&tempmon_calib>, > <&tempmon_temp_grade>; > + nvmem-cell-names = "calib", "temp_grade"; > + clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; > + #thermal-sensor-cells = <0>; > + }; > }; > > usbphy1: usbphy@20c9000 { > diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi > index 911d8cf..d8efc0a 100644 > --- a/arch/arm/boot/dts/imx6sl.dtsi > +++ b/arch/arm/boot/dts/imx6sl.dtsi > @@ -93,16 +93,6 @@ > }; > }; > > - tempmon: tempmon { > - compatible = "fsl,imx6q-tempmon"; > - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-parent = <&gpc>; > - fsl,tempmon = <&anatop>; > - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; > - nvmem-cell-names = "calib", "temp_grade"; > - clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; > - }; > - > pmu { > compatible = "arm,cortex-a9-pmu"; > interrupt-parent = <&gpc>; > @@ -628,6 +618,16 @@ > anatop-min-voltage = <725000>; > anatop-max-voltage = <1450000>; > }; > + > + tempmon: tempmon { > + compatible = "fsl,imx6q-tempmon"; > + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&gpc>; > + fsl,tempmon = <&anatop>; > + nvmem-cells = <&tempmon_calib>, > <&tempmon_temp_grade>; > + nvmem-cell-names = "calib", "temp_grade"; > + clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; > + }; > }; > > usbphy1: usbphy@20c9000 { > diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi > index edd3abb..bf7f048 100644 > --- a/arch/arm/boot/dts/imx6sll.dtsi > +++ b/arch/arm/boot/dts/imx6sll.dtsi > @@ -105,16 +105,6 @@ > clock-output-names = "ipp_di1"; > }; > > - tempmon: temperature-sensor { > - compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; > - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-parent = <&gpc>; > - fsl,tempmon = <&anatop>; > - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; > - nvmem-cell-names = "calib", "temp_grade"; > - clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; > - }; > - > soc { > #address-cells = <1>; > #size-cells = <1>; > @@ -531,6 +521,16 @@ > anatop-max-voltage = <3400000>; > anatop-enable-bit = <0>; > }; > + > + tempmon: temperature-sensor { > + compatible = "fsl,imx6sll-tempmon", > "fsl,imx6sx-tempmon"; > + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&gpc>; > + fsl,tempmon = <&anatop>; > + nvmem-cells = <&tempmon_calib>, > <&tempmon_temp_grade>; > + nvmem-cell-names = "calib", "temp_grade"; > + clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; > + }; > }; > > usbphy1: usb-phy@20c9000 { > diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi > index e031337..8c4473b 100644 > --- a/arch/arm/boot/dts/imx6sx.dtsi > +++ b/arch/arm/boot/dts/imx6sx.dtsi > @@ -134,16 +134,6 @@ > clock-output-names = "anaclk2"; > }; > > - tempmon: tempmon { > - compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; > - interrupt-parent = <&gpc>; > - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; > - fsl,tempmon = <&anatop>; > - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; > - nvmem-cell-names = "calib", "temp_grade"; > - clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; > - }; > - > pmu { > compatible = "arm,cortex-a9-pmu"; > interrupt-parent = <&gpc>; > @@ -696,6 +686,16 @@ > anatop-min-voltage = <725000>; > anatop-max-voltage = <1450000>; > }; > + > + tempmon: tempmon { > + compatible = "fsl,imx6sx-tempmon", > "fsl,imx6q-tempmon"; > + interrupt-parent = <&gpc>; > + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; > + fsl,tempmon = <&anatop>; > + nvmem-cells = <&tempmon_calib>, > <&tempmon_temp_grade>; > + nvmem-cell-names = "calib", "temp_grade"; > + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; > + }; > }; > > usbphy1: usbphy@20c9000 { > diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi > index 35e7301..505fd4f 100644 > --- a/arch/arm/boot/dts/imx6ul.dtsi > +++ b/arch/arm/boot/dts/imx6ul.dtsi > @@ -131,16 +131,6 @@ > clock-output-names = "ipp_di1"; > }; > > - tempmon: tempmon { > - compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; > - interrupt-parent = <&gpc>; > - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; > - fsl,tempmon = <&anatop>; > - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; > - nvmem-cell-names = "calib", "temp_grade"; > - clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; > - }; > - > pmu { > compatible = "arm,cortex-a7-pmu"; > interrupt-parent = <&gpc>; > @@ -611,6 +601,16 @@ > anatop-min-voltage = <725000>; > anatop-max-voltage = <1450000>; > }; > + > + tempmon: tempmon { > + compatible = "fsl,imx6ul-tempmon", > "fsl,imx6sx-tempmon"; > + interrupt-parent = <&gpc>; > + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; > + fsl,tempmon = <&anatop>; > + nvmem-cells = <&tempmon_calib>, > <&tempmon_temp_grade>; > + nvmem-cell-names = "calib", "temp_grade"; > + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; > + }; > }; > > usbphy1: usbphy@20c9000 { > diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index > 8bac491..3904558 100644 > --- a/arch/arm/boot/dts/imx7s.dtsi > +++ b/arch/arm/boot/dts/imx7s.dtsi > @@ -147,16 +147,6 @@ > }; > }; > > - tempmon: tempmon { > - compatible = "fsl,imx7d-tempmon"; > - interrupt-parent = <&gpc>; > - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; > - fsl,tempmon = <&anatop>; > - nvmem-cells = <&tempmon_calib>, <&fuse_grade>; > - nvmem-cell-names = "calib", "temp_grade"; > - clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; > - }; > - > timer { > compatible = "arm,armv7-timer"; > interrupt-parent = <&intc>; > @@ -586,6 +576,16 @@ > anatop-max-voltage = <1300000>; > anatop-enable-bit = <0>; > }; > + > + tempmon: tempmon { > + compatible = "fsl,imx7d-tempmon"; > + interrupt-parent = <&gpc>; > + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; > + fsl,tempmon = <&anatop>; > + nvmem-cells = <&tempmon_calib>, > <&fuse_grade>; > + nvmem-cell-names = "calib", "temp_grade"; > + clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; > + }; > }; > > snvs: snvs@30370000 { > -- > 2.7.4
> Subject: RE: [PATCH] ARM: dts: imx: Make tempmon node as child of anatop > node > > > From: Anson Huang <Anson.Huang@nxp.com> > > Sent: Wednesday, May 20, 2020 2:30 PM > > > > i.MX6/7 SoCs' temperature sensor is inside anatop module from HW > > perspective, so it should be a child node of anatop. > > > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> > > Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> > > BTW, I think you also need a binding doc for this change. The binding doc is the imx-thermal.yaml I sent out, it is suggested by Rob to move tempmon into anatop node, that is why I did this patch to align with the binding doc. Anson
> From: Anson Huang <anson.huang@nxp.com> > Sent: Wednesday, May 20, 2020 3:47 PM > > > Subject: RE: [PATCH] ARM: dts: imx: Make tempmon node as child of > > anatop node > > > > > From: Anson Huang <Anson.Huang@nxp.com> > > > Sent: Wednesday, May 20, 2020 2:30 PM > > > > > > i.MX6/7 SoCs' temperature sensor is inside anatop module from HW > > > perspective, so it should be a child node of anatop. > > > > > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> > > > > Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> > > > > BTW, I think you also need a binding doc for this change. > > The binding doc is the imx-thermal.yaml I sent out, it is suggested by Rob to > move tempmon into anatop node, that is why I did this patch to align with the > binding doc. That's thermal binding doc. We need a binding doc to describe the constraints for anatop as well. Regards Aisheng > Anson
> Subject: RE: [PATCH] ARM: dts: imx: Make tempmon node as child of anatop > node > > > From: Anson Huang <anson.huang@nxp.com> > > Sent: Wednesday, May 20, 2020 3:47 PM > > > > > Subject: RE: [PATCH] ARM: dts: imx: Make tempmon node as child of > > > anatop node > > > > > > > From: Anson Huang <Anson.Huang@nxp.com> > > > > Sent: Wednesday, May 20, 2020 2:30 PM > > > > > > > > i.MX6/7 SoCs' temperature sensor is inside anatop module from HW > > > > perspective, so it should be a child node of anatop. > > > > > > > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> > > > > > > Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> > > > > > > BTW, I think you also need a binding doc for this change. > > > > The binding doc is the imx-thermal.yaml I sent out, it is suggested by > > Rob to move tempmon into anatop node, that is why I did this patch to > > align with the binding doc. > > That's thermal binding doc. > We need a binding doc to describe the constraints for anatop as well. anatop includes PMU, thermal etc., need to think about how to add it and where to put it, will think about it later. Anson
> From: Anson Huang <anson.huang@nxp.com> > Sent: Wednesday, May 20, 2020 4:12 PM > > > Subject: RE: [PATCH] ARM: dts: imx: Make tempmon node as child of > > anatop node > > > > > From: Anson Huang <anson.huang@nxp.com> > > > Sent: Wednesday, May 20, 2020 3:47 PM > > > > > > > Subject: RE: [PATCH] ARM: dts: imx: Make tempmon node as child of > > > > anatop node > > > > > > > > > From: Anson Huang <Anson.Huang@nxp.com> > > > > > Sent: Wednesday, May 20, 2020 2:30 PM > > > > > > > > > > i.MX6/7 SoCs' temperature sensor is inside anatop module from HW > > > > > perspective, so it should be a child node of anatop. > > > > > > > > > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> > > > > > > > > Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> > > > > > > > > BTW, I think you also need a binding doc for this change. > > > > > > The binding doc is the imx-thermal.yaml I sent out, it is suggested > > > by Rob to move tempmon into anatop node, that is why I did this > > > patch to align with the binding doc. > > > > That's thermal binding doc. > > We need a binding doc to describe the constraints for anatop as well. > > anatop includes PMU, thermal etc., need to think about how to add it and > where to put it, will think about it later. We can combine them into one. Regards Aisheng > > Anson
On Wed, May 20, 2020 at 02:30:16PM +0800, Anson Huang wrote: > i.MX6/7 SoCs' temperature sensor is inside anatop module from HW > perspective, so it should be a child node of anatop. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Applied, thanks.
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 39d4afd..43d44d5 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -69,17 +69,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; - #thermal-sensor-cells = <0>; - }; - ldb: ldb { #address-cells = <1>; #size-cells = <0>; @@ -795,6 +784,17 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 911d8cf..d8efc0a 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -93,16 +93,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gpc>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&gpc>; @@ -628,6 +618,16 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index edd3abb..bf7f048 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -105,16 +105,6 @@ clock-output-names = "ipp_di1"; }; - tempmon: temperature-sensor { - compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gpc>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; - }; - soc { #address-cells = <1>; #size-cells = <1>; @@ -531,6 +521,16 @@ anatop-max-voltage = <3400000>; anatop-enable-bit = <0>; }; + + tempmon: temperature-sensor { + compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usb-phy@20c9000 { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index e031337..8c4473b 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -134,16 +134,6 @@ clock-output-names = "anaclk2"; }; - tempmon: tempmon { - compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&gpc>; @@ -696,6 +686,16 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 35e7301..505fd4f 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -131,16 +131,6 @@ clock-output-names = "ipp_di1"; }; - tempmon: tempmon { - compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a7-pmu"; interrupt-parent = <&gpc>; @@ -611,6 +601,16 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 8bac491..3904558 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -147,16 +147,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx7d-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&fuse_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; - }; - timer { compatible = "arm,armv7-timer"; interrupt-parent = <&intc>; @@ -586,6 +576,16 @@ anatop-max-voltage = <1300000>; anatop-enable-bit = <0>; }; + + tempmon: tempmon { + compatible = "fsl,imx7d-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&fuse_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; + }; }; snvs: snvs@30370000 {
i.MX6/7 SoCs' temperature sensor is inside anatop module from HW perspective, so it should be a child node of anatop. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- arch/arm/boot/dts/imx6qdl.dtsi | 22 +++++++++++----------- arch/arm/boot/dts/imx6sl.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx6sll.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx6sx.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx6ul.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx7s.dtsi | 20 ++++++++++---------- 6 files changed, 61 insertions(+), 61 deletions(-)