[v5,16/27] clk: bcm: rpi: Rename is_prepared function

Commit Message

Maxime Ripard June 15, 2020, 8:40 a.m. UTC

The raspberrypi_fw_pll_is_on function doesn't only apply to PLL
registered in the driver, but any clock exposed by the firmware.

Since we also implement the is_prepared hook, make the function
consistent with the other function names.

Cc: Michael Turquette <[e-mail]>
Cc: [e-mail]
Acked-by: Nicolas Saenz Julienne <[e-mail]>
Reviewed-by: Stephen Boyd <[e-mail]>
Tested-by: Nicolas Saenz Julienne <[e-mail]>
Signed-off-by: Maxime Ripard <[e-mail]>
---
 drivers/clk/bcm/clk-raspberrypi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Stephen Boyd June 25, 2020, 12:45 a.m. UTC | #1

Quoting Maxime Ripard (2020-06-15 01:40:56)
> The raspberrypi_fw_pll_is_on function doesn't only apply to PLL
> registered in the driver, but any clock exposed by the firmware.
> 
> Since we also implement the is_prepared hook, make the function
> consistent with the other function names.
> 
> Cc: Michael Turquette <[e-mail]>
> Cc: [e-mail]
> Acked-by: Nicolas Saenz Julienne <[e-mail]>
> Reviewed-by: Stephen Boyd <[e-mail]>
> Tested-by: Nicolas Saenz Julienne <[e-mail]>
> Signed-off-by: Maxime Ripard <[e-mail]>
> ---

Applied to clk-next

Patch

diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 3fce49a65a79..58ac1b104429 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -85,7 +85,7 @@  static int raspberrypi_clock_property(struct rpi_firmware *firmware,
 	return 0;
 }
 
-static int raspberrypi_fw_pll_is_on(struct clk_hw *hw)
+static int raspberrypi_fw_is_prepared(struct clk_hw *hw)
 {
 	struct raspberrypi_clk_data *data =
 		container_of(hw, struct raspberrypi_clk_data, hw);
@@ -166,7 +166,7 @@  static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
 }
 
 static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {
-	.is_prepared = raspberrypi_fw_pll_is_on,
+	.is_prepared = raspberrypi_fw_is_prepared,
 	.recalc_rate = raspberrypi_fw_pll_get_rate,
 	.set_rate = raspberrypi_fw_pll_set_rate,
 	.determine_rate = raspberrypi_pll_determine_rate,