| Message ID | 1592501369-27645-1-git-send-email-paul.gortmaker@windriver.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: don't preempt_disable in do_debug_exception | expand |
On Thu, Jun 18, 2020 at 01:29:29PM -0400, Paul Gortmaker wrote: > In commit d8bb6718c4db ("arm64: Make debug exception handlers visible > from RCU") debug_exception_enter and exit were added to deal with better > tracking of RCU state - however, in addition to that, but not mentioned > in the commit log, a preempt_disable/enable pair were also added. > > Based on the comment (being removed here) it would seem that the pair > were not added to address a specific problem, but just as a proactive, > preventative measure - as in "seemed like a good idea at the time". > > The problem is that do_debug_exception() eventually calls out to > generic kernel code like do_force_sig_info() which takes non-raw locks > and on -rt enabled kernels, results in things looking like the following, > since on -rt kernels, it is noticed that preemption is still disabled. > > BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:975 > in_atomic(): 1, irqs_disabled(): 0, pid: 35658, name: gdbtest > Preemption disabled at: > [<ffff000010081578>] do_debug_exception+0x38/0x1a4 > Call trace: > dump_backtrace+0x0/0x138 > show_stack+0x24/0x30 > dump_stack+0x94/0xbc > ___might_sleep+0x13c/0x168 > rt_spin_lock+0x40/0x80 > do_force_sig_info+0x30/0xe0 > force_sig_fault+0x64/0x90 > arm64_force_sig_fault+0x50/0x80 > send_user_sigtrap+0x50/0x80 > brk_handler+0x98/0xc8 > do_debug_exception+0x70/0x1a4 > el0_dbg+0x18/0x20 > > The reproducer was basically an automated gdb test that set a breakpoint > on a simple "hello world" program and then quit gdb once the breakpoint > was hit - i.e. "(gdb) A debugging session is active. Quit anyway? " Hmm, the debug exception handler path was definitely written with the expectation that preemption is disabled, so this is unfortunate. For exceptions from kernelspace, we need to keep that guarantee as we implement things like BUG() using this path. For exceptions from userspace, it's plausible that we could re-enable preemption, but then we should also re-enable interrupts and debug exceptions too because we don't context-switch pstate in switch_to() and we would end up with holes in our kernel debug coverage (and these might be fatal if e.g. single step doesn't work in a kprobe OOL buffer). However, that then means that any common code when handling user and kernel debug exceptions needs to be re-entrant, which it probably isn't at the moment (I haven't checked). So although I'm alright with this idea for user debug exceptions, I think it needs more work. Will
On Tue, Jun 23, 2020 at 04:59:01PM +0100, Will Deacon wrote: > On Thu, Jun 18, 2020 at 01:29:29PM -0400, Paul Gortmaker wrote: > > In commit d8bb6718c4db ("arm64: Make debug exception handlers visible > > from RCU") debug_exception_enter and exit were added to deal with better > > tracking of RCU state - however, in addition to that, but not mentioned > > in the commit log, a preempt_disable/enable pair were also added. > > > > Based on the comment (being removed here) it would seem that the pair > > were not added to address a specific problem, but just as a proactive, > > preventative measure - as in "seemed like a good idea at the time". > > > > The problem is that do_debug_exception() eventually calls out to > > generic kernel code like do_force_sig_info() which takes non-raw locks > > and on -rt enabled kernels, results in things looking like the following, > > since on -rt kernels, it is noticed that preemption is still disabled. > > > > BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:975 > > in_atomic(): 1, irqs_disabled(): 0, pid: 35658, name: gdbtest > > Preemption disabled at: > > [<ffff000010081578>] do_debug_exception+0x38/0x1a4 > > Call trace: > > dump_backtrace+0x0/0x138 > > show_stack+0x24/0x30 > > dump_stack+0x94/0xbc > > ___might_sleep+0x13c/0x168 > > rt_spin_lock+0x40/0x80 > > do_force_sig_info+0x30/0xe0 > > force_sig_fault+0x64/0x90 > > arm64_force_sig_fault+0x50/0x80 > > send_user_sigtrap+0x50/0x80 > > brk_handler+0x98/0xc8 > > do_debug_exception+0x70/0x1a4 > > el0_dbg+0x18/0x20 > > > > The reproducer was basically an automated gdb test that set a breakpoint > > on a simple "hello world" program and then quit gdb once the breakpoint > > was hit - i.e. "(gdb) A debugging session is active. Quit anyway? " > > Hmm, the debug exception handler path was definitely written with the > expectation that preemption is disabled, so this is unfortunate. For > exceptions from kernelspace, we need to keep that guarantee as we implement > things like BUG() using this path. For exceptions from userspace, it's > plausible that we could re-enable preemption, but then we should also > re-enable interrupts and debug exceptions too because we don't > context-switch pstate in switch_to() and we would end up with holes in our > kernel debug coverage (and these might be fatal if e.g. single step doesn't > work in a kprobe OOL buffer). However, that then means that any common code > when handling user and kernel debug exceptions needs to be re-entrant, > which it probably isn't at the moment (I haven't checked). I'm pretty certain existing code is not reentrant, and regardless it's going to be a mess to reason about this generally if we have to undo our strict exception nesting rules. I reckon we need to treat this like an NMI instead -- is that plausible? Mark.
On Tue, 23 Jun 2020 17:55:57 +0100 Mark Rutland <mark.rutland@arm.com> wrote: > On Tue, Jun 23, 2020 at 04:59:01PM +0100, Will Deacon wrote: > > On Thu, Jun 18, 2020 at 01:29:29PM -0400, Paul Gortmaker wrote: > > > In commit d8bb6718c4db ("arm64: Make debug exception handlers visible > > > from RCU") debug_exception_enter and exit were added to deal with better > > > tracking of RCU state - however, in addition to that, but not mentioned > > > in the commit log, a preempt_disable/enable pair were also added. > > > > > > Based on the comment (being removed here) it would seem that the pair > > > were not added to address a specific problem, but just as a proactive, > > > preventative measure - as in "seemed like a good idea at the time". > > > > > > The problem is that do_debug_exception() eventually calls out to > > > generic kernel code like do_force_sig_info() which takes non-raw locks > > > and on -rt enabled kernels, results in things looking like the following, > > > since on -rt kernels, it is noticed that preemption is still disabled. > > > > > > BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:975 > > > in_atomic(): 1, irqs_disabled(): 0, pid: 35658, name: gdbtest > > > Preemption disabled at: > > > [<ffff000010081578>] do_debug_exception+0x38/0x1a4 > > > Call trace: > > > dump_backtrace+0x0/0x138 > > > show_stack+0x24/0x30 > > > dump_stack+0x94/0xbc > > > ___might_sleep+0x13c/0x168 > > > rt_spin_lock+0x40/0x80 > > > do_force_sig_info+0x30/0xe0 > > > force_sig_fault+0x64/0x90 > > > arm64_force_sig_fault+0x50/0x80 > > > send_user_sigtrap+0x50/0x80 > > > brk_handler+0x98/0xc8 > > > do_debug_exception+0x70/0x1a4 > > > el0_dbg+0x18/0x20 > > > > > > The reproducer was basically an automated gdb test that set a breakpoint > > > on a simple "hello world" program and then quit gdb once the breakpoint > > > was hit - i.e. "(gdb) A debugging session is active. Quit anyway? " > > > > Hmm, the debug exception handler path was definitely written with the > > expectation that preemption is disabled, so this is unfortunate. For > > exceptions from kernelspace, we need to keep that guarantee as we implement > > things like BUG() using this path. For exceptions from userspace, it's > > plausible that we could re-enable preemption, but then we should also > > re-enable interrupts and debug exceptions too because we don't > > context-switch pstate in switch_to() and we would end up with holes in our > > kernel debug coverage (and these might be fatal if e.g. single step doesn't > > work in a kprobe OOL buffer). However, that then means that any common code > > when handling user and kernel debug exceptions needs to be re-entrant, > > which it probably isn't at the moment (I haven't checked). > > I'm pretty certain existing code is not reentrant, and regardless it's > going to be a mess to reason about this generally if we have to undo our > strict exception nesting rules. Sounds like a kprobe post-handler hits another kprobe, which might invoke the debug handler in debug context. If kprobes find that, it skips the nested one, but it needs to do single stepping in it to exit. Is that not possible on arm64? Thank you, > > I reckon we need to treat this like an NMI instead -- is that plausible? > > Mark.
On Tue, Jun 23, 2020 at 05:55:57PM +0100, Mark Rutland wrote: > On Tue, Jun 23, 2020 at 04:59:01PM +0100, Will Deacon wrote: > > On Thu, Jun 18, 2020 at 01:29:29PM -0400, Paul Gortmaker wrote: > > > BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:975 > > > in_atomic(): 1, irqs_disabled(): 0, pid: 35658, name: gdbtest > > > Preemption disabled at: > > > [<ffff000010081578>] do_debug_exception+0x38/0x1a4 > > > Call trace: > > > dump_backtrace+0x0/0x138 > > > show_stack+0x24/0x30 > > > dump_stack+0x94/0xbc > > > ___might_sleep+0x13c/0x168 > > > rt_spin_lock+0x40/0x80 > > > do_force_sig_info+0x30/0xe0 > > > force_sig_fault+0x64/0x90 > > > arm64_force_sig_fault+0x50/0x80 > > > send_user_sigtrap+0x50/0x80 > > > brk_handler+0x98/0xc8 > > > do_debug_exception+0x70/0x1a4 > > > el0_dbg+0x18/0x20 > > > > > > The reproducer was basically an automated gdb test that set a breakpoint > > > on a simple "hello world" program and then quit gdb once the breakpoint > > > was hit - i.e. "(gdb) A debugging session is active. Quit anyway? " > > > > Hmm, the debug exception handler path was definitely written with the > > expectation that preemption is disabled, so this is unfortunate. For > > exceptions from kernelspace, we need to keep that guarantee as we implement > > things like BUG() using this path. For exceptions from userspace, it's > > plausible that we could re-enable preemption, but then we should also > > re-enable interrupts and debug exceptions too because we don't > > context-switch pstate in switch_to() and we would end up with holes in our > > kernel debug coverage (and these might be fatal if e.g. single step doesn't > > work in a kprobe OOL buffer). However, that then means that any common code > > when handling user and kernel debug exceptions needs to be re-entrant, > > which it probably isn't at the moment (I haven't checked). > > I'm pretty certain existing code is not reentrant, and regardless it's > going to be a mess to reason about this generally if we have to undo our > strict exception nesting rules. Are these rules written down somewhere? I'll need to update them if we get this working for preempt-rt (and we should try to do that). > I reckon we need to treat this like an NMI instead -- is that plausible? I don't think so. It's very much a synchronous exception, and delivering a signal to the exceptional context doesn't feel like an NMI to me. There's also a fair amount of code that can run in debug context (hw_breakpoint, kprobes, uprobes, kasan) which might not be happy to suddenly be in an NMI-like environment. Furthermore, the masking rules are different depending on what triggers the exception. One of the things I've started looking at is ripping out our dodgy hw_breakpoint code so that kernel debug exceptions are easier to reason about. Specifically, I think we end up with something like: - On taking a non-debug exception from EL0, unmask D as soon as we can. - On taking a debug exception from EL0, unmask {D,I} and invoke user handlers. I think this always means SIGTRAP, apart from uprobes. This will mean making those paths preemptible, as I don't think they are right now (e.g. traversing the callback hooks uses an RCU-protected list). - On taking a non-debug, non-fatal synchronous exception from EL1, unmask D as soon as we can (i.e. we step into these exceptions). Fatal exceptions can obviously leave D masked. - On taking an interrupt from EL1, stash MDSCR_EL1.SS in a pcpu variable and clear the register bit if it was set. Then unmask only D and leave I set. On return from the exception, set D and restore MDSCR_EL1.SS. If we decide to reschedule, unmask D (i.e. we only step into interrupts if we need a reschedule. Alternatively, we could skip the reschedule if we were stepping.) - On taking a debug exception from EL1, leave {D,I} set. Watchpoints on uaccess are silently stepped over. Thoughts? We could probably simplify this if we could state that stepping an instruction in kernel space could only ever be interrupted by an interrupt. That's probably true for kprobes, but relying on it feels like it might bite us later on. Will
On Fri, 26 Jun 2020 10:55:54 +0100 Will Deacon <will@kernel.org> wrote: > On Tue, Jun 23, 2020 at 05:55:57PM +0100, Mark Rutland wrote: > > On Tue, Jun 23, 2020 at 04:59:01PM +0100, Will Deacon wrote: > > > On Thu, Jun 18, 2020 at 01:29:29PM -0400, Paul Gortmaker wrote: > > > > BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:975 > > > > in_atomic(): 1, irqs_disabled(): 0, pid: 35658, name: gdbtest > > > > Preemption disabled at: > > > > [<ffff000010081578>] do_debug_exception+0x38/0x1a4 > > > > Call trace: > > > > dump_backtrace+0x0/0x138 > > > > show_stack+0x24/0x30 > > > > dump_stack+0x94/0xbc > > > > ___might_sleep+0x13c/0x168 > > > > rt_spin_lock+0x40/0x80 > > > > do_force_sig_info+0x30/0xe0 > > > > force_sig_fault+0x64/0x90 > > > > arm64_force_sig_fault+0x50/0x80 > > > > send_user_sigtrap+0x50/0x80 > > > > brk_handler+0x98/0xc8 > > > > do_debug_exception+0x70/0x1a4 > > > > el0_dbg+0x18/0x20 > > > > > > > > The reproducer was basically an automated gdb test that set a breakpoint > > > > on a simple "hello world" program and then quit gdb once the breakpoint > > > > was hit - i.e. "(gdb) A debugging session is active. Quit anyway? " > > > > > > Hmm, the debug exception handler path was definitely written with the > > > expectation that preemption is disabled, so this is unfortunate. For > > > exceptions from kernelspace, we need to keep that guarantee as we implement > > > things like BUG() using this path. For exceptions from userspace, it's > > > plausible that we could re-enable preemption, but then we should also > > > re-enable interrupts and debug exceptions too because we don't > > > context-switch pstate in switch_to() and we would end up with holes in our > > > kernel debug coverage (and these might be fatal if e.g. single step doesn't > > > work in a kprobe OOL buffer). However, that then means that any common code > > > when handling user and kernel debug exceptions needs to be re-entrant, > > > which it probably isn't at the moment (I haven't checked). > > > > I'm pretty certain existing code is not reentrant, and regardless it's > > going to be a mess to reason about this generally if we have to undo our > > strict exception nesting rules. > > Are these rules written down somewhere? I'll need to update them if we > get this working for preempt-rt (and we should try to do that). > > > I reckon we need to treat this like an NMI instead -- is that plausible? > > I don't think so. It's very much a synchronous exception, and delivering a > signal to the exceptional context doesn't feel like an NMI to me. There's > also a fair amount of code that can run in debug context (hw_breakpoint, > kprobes, uprobes, kasan) which might not be happy to suddenly be in an > NMI-like environment. Furthermore, the masking rules are different depending > on what triggers the exception. > > One of the things I've started looking at is ripping out our dodgy > hw_breakpoint code so that kernel debug exceptions are easier to reason > about. Specifically, I think we end up with something like: > > - On taking a non-debug exception from EL0, unmask D as soon as we can. > > - On taking a debug exception from EL0, unmask {D,I} and invoke user > handlers. I think this always means SIGTRAP, apart from uprobes. > This will mean making those paths preemptible, as I don't think they > are right now (e.g. traversing the callback hooks uses an RCU-protected > list). > > - On taking a non-debug, non-fatal synchronous exception from EL1, unmask > D as soon as we can (i.e. we step into these exceptions). Fatal exceptions > can obviously leave D masked. To make clear, the BRK exception will be non-fatal synchronous exception, correct? If so, would you mean single-stepping into these exception handlers too? As we discussed in another thread, after the BRK only kprobes is merged, I'm OK for this. But also we need to care about the BRK recursive call. If someone puts a kprobe in the single-step handler, we can break into the other break handler is running. (kprobes itself can handle this case, because it sets the current_kprobe as the recursion-detect flag) > > - On taking an interrupt from EL1, stash MDSCR_EL1.SS in a pcpu variable and > clear the register bit if it was set. Then unmask only D and leave I set. On > return from the exception, set D and restore MDSCR_EL1.SS. If we decide to > reschedule, unmask D (i.e. we only step into interrupts if we need a > reschedule. Alternatively, we could skip the reschedule if we were > stepping.) This sounds good to me (context-based single-stepping). Thank you, > > - On taking a debug exception from EL1, leave {D,I} set. Watchpoints on > uaccess are silently stepped over. > > Thoughts? We could probably simplify this if we could state that stepping an > instruction in kernel space could only ever be interrupted by an interrupt. > That's probably true for kprobes, but relying on it feels like it might bite > us later on. > > Will
Hi Will, Sorry for the delay on this -- chasing up now that I have the entry logic paged-in. On Fri, Jun 26, 2020 at 10:55:54AM +0100, Will Deacon wrote: > On Tue, Jun 23, 2020 at 05:55:57PM +0100, Mark Rutland wrote: > > On Tue, Jun 23, 2020 at 04:59:01PM +0100, Will Deacon wrote: > > > On Thu, Jun 18, 2020 at 01:29:29PM -0400, Paul Gortmaker wrote: > > > > BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:975 > > > > in_atomic(): 1, irqs_disabled(): 0, pid: 35658, name: gdbtest > > > > Preemption disabled at: > > > > [<ffff000010081578>] do_debug_exception+0x38/0x1a4 > > > > Call trace: > > > > dump_backtrace+0x0/0x138 > > > > show_stack+0x24/0x30 > > > > dump_stack+0x94/0xbc > > > > ___might_sleep+0x13c/0x168 > > > > rt_spin_lock+0x40/0x80 > > > > do_force_sig_info+0x30/0xe0 > > > > force_sig_fault+0x64/0x90 > > > > arm64_force_sig_fault+0x50/0x80 > > > > send_user_sigtrap+0x50/0x80 > > > > brk_handler+0x98/0xc8 > > > > do_debug_exception+0x70/0x1a4 > > > > el0_dbg+0x18/0x20 > > > > > > > > The reproducer was basically an automated gdb test that set a breakpoint > > > > on a simple "hello world" program and then quit gdb once the breakpoint > > > > was hit - i.e. "(gdb) A debugging session is active. Quit anyway? " > > > > > > Hmm, the debug exception handler path was definitely written with the > > > expectation that preemption is disabled, so this is unfortunate. For > > > exceptions from kernelspace, we need to keep that guarantee as we implement > > > things like BUG() using this path. For exceptions from userspace, it's > > > plausible that we could re-enable preemption, but then we should also > > > re-enable interrupts and debug exceptions too because we don't > > > context-switch pstate in switch_to() and we would end up with holes in our > > > kernel debug coverage (and these might be fatal if e.g. single step doesn't > > > work in a kprobe OOL buffer). However, that then means that any common code > > > when handling user and kernel debug exceptions needs to be re-entrant, > > > which it probably isn't at the moment (I haven't checked). > > > > I'm pretty certain existing code is not reentrant, and regardless it's > > going to be a mess to reason about this generally if we have to undo our > > strict exception nesting rules. > > Are these rules written down somewhere? I'll need to update them if we > get this working for preempt-rt (and we should try to do that). > > > I reckon we need to treat this like an NMI instead -- is that plausible? > > I don't think so. It's very much a synchronous exception, and delivering a > signal to the exceptional context doesn't feel like an NMI to me. There's > also a fair amount of code that can run in debug context (hw_breakpoint, > kprobes, uprobes, kasan) which might not be happy to suddenly be in an > NMI-like environment. Furthermore, the masking rules are different depending > on what triggers the exception. When I was investigating the entry interaction with lockdep and tracing, I figure out that we'll want to (at least partially) separate the BRK handling from the rest of the debug exception handling, as is done on x86. That way we can make WARN/BUG/KASAN BRK usage inherit the context they interrupted rather than acting NMI-like. With that, we could reconsider how exactly the HW breakpoint, HW watchpoint, and HW single-step cases should behave (e.g. whether we should align with x86 and treat those as true NMIs). > One of the things I've started looking at is ripping out our dodgy > hw_breakpoint code so that kernel debug exceptions are easier to reason > about. Specifically, I think we end up with something like: > > - On taking a non-debug exception from EL0, unmask D as soon as we can. Sure. We already try to do this ASAP (in the entry code rather than in the specific handler), but since ERET makes ESR and FAR UNKNOWN we have a reasonable amount of work that has to be done first. We can do this earlier if we snapshot the exception sysregs before the triage logic (even if that means reading those redundantly). > - On taking a debug exception from EL0, unmask {D,I} and invoke user > handlers. I think this always means SIGTRAP, apart from uprobes. > This will mean making those paths preemptible, as I don't think they > are right now (e.g. traversing the callback hooks uses an RCU-protected > list). I'm not sure exactly how to manage the callback hooks here, but otherwise this sounds plausible. We already treat the EL0 cases fairly differenly from the EL1 cases. > - On taking a non-debug, non-fatal synchronous exception from EL1, unmask > D as soon as we can (i.e. we step into these exceptions). Fatal exceptions > can obviously leave D masked. As above, we try to do this today, and can move it earlier if we snapshot the exception sysregs earlier. > - On taking an interrupt from EL1, stash MDSCR_EL1.SS in a pcpu variable and > clear the register bit if it was set. Then unmask only D and leave I set. On > return from the exception, set D and restore MDSCR_EL1.SS. If we decide to > reschedule, unmask D (i.e. we only step into interrupts if we need a > reschedule. Alternatively, we could skip the reschedule if we were > stepping.) I'm not entirely sure how this works with softirqs (as I thought they could unmask IRQ before returning), but I'd need to relearn how those work. > - On taking a debug exception from EL1, leave {D,I} set. Watchpoints on > uaccess are silently stepped over. This sounds fine to me. > Thoughts? We could probably simplify this if we could state that stepping an > instruction in kernel space could only ever be interrupted by an interrupt. > That's probably true for kprobes, but relying on it feels like it might bite > us later on. I think trying to simplify this is worthwhile. I'd rather make this do less than try to account for a myriad rare and untested edge cases. Thanks, Mark.
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 8afb238ff335..4d83ec991b33 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -788,13 +788,6 @@ void __init hook_debug_fault_code(int nr, debug_fault_info[nr].name = name; } -/* - * In debug exception context, we explicitly disable preemption despite - * having interrupts disabled. - * This serves two purposes: it makes it much less likely that we would - * accidentally schedule in exception context and it will force a warning - * if we somehow manage to schedule by accident. - */ static void debug_exception_enter(struct pt_regs *regs) { /* @@ -816,8 +809,6 @@ static void debug_exception_enter(struct pt_regs *regs) rcu_nmi_enter(); } - preempt_disable(); - /* This code is a bit fragile. Test it. */ RCU_LOCKDEP_WARN(!rcu_is_watching(), "exception_enter didn't work"); } @@ -825,8 +816,6 @@ NOKPROBE_SYMBOL(debug_exception_enter); static void debug_exception_exit(struct pt_regs *regs) { - preempt_enable_no_resched(); - if (!user_mode(regs)) rcu_nmi_exit();
In commit d8bb6718c4db ("arm64: Make debug exception handlers visible from RCU") debug_exception_enter and exit were added to deal with better tracking of RCU state - however, in addition to that, but not mentioned in the commit log, a preempt_disable/enable pair were also added. Based on the comment (being removed here) it would seem that the pair were not added to address a specific problem, but just as a proactive, preventative measure - as in "seemed like a good idea at the time". The problem is that do_debug_exception() eventually calls out to generic kernel code like do_force_sig_info() which takes non-raw locks and on -rt enabled kernels, results in things looking like the following, since on -rt kernels, it is noticed that preemption is still disabled. BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:975 in_atomic(): 1, irqs_disabled(): 0, pid: 35658, name: gdbtest Preemption disabled at: [<ffff000010081578>] do_debug_exception+0x38/0x1a4 Call trace: dump_backtrace+0x0/0x138 show_stack+0x24/0x30 dump_stack+0x94/0xbc ___might_sleep+0x13c/0x168 rt_spin_lock+0x40/0x80 do_force_sig_info+0x30/0xe0 force_sig_fault+0x64/0x90 arm64_force_sig_fault+0x50/0x80 send_user_sigtrap+0x50/0x80 brk_handler+0x98/0xc8 do_debug_exception+0x70/0x1a4 el0_dbg+0x18/0x20 The reproducer was basically an automated gdb test that set a breakpoint on a simple "hello world" program and then quit gdb once the breakpoint was hit - i.e. "(gdb) A debugging session is active. Quit anyway? " Fixes: d8bb6718c4db ("arm64: Make debug exception handlers visible from RCU") Cc: stable@vger.kernel.org Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> --- arch/arm64/mm/fault.c | 11 ----------- 1 file changed, 11 deletions(-)