Message ID | 20200626121925.14365-1-andriy.shevchenko@linux.intel.com (mailing list archive) |
---|---|
Headers | show |
Series | media: atomisp: Clean ups and fixes to make it load on Baytrail | expand |
Hi Andy, Em Fri, 26 Jun 2020 15:19:10 +0300 Andy Shevchenko <andriy.shevchenko@linux.intel.com> escreveu: > I'm experimenting with it on Baytrail machine and found some issues. > Along with fixing them I cleaned up a bit this. Thanks for that! Yeah, I found some issues there myself, although testing on a device with more than one camera is very nice. I'll apply your patches on the top of my atomisp tree: https://git.linuxtv.org/mchehab/experimental.git/log/?h=atomisp_v5 On a very quick look, I suspect that some may rise some conflicts, as I did some improvements at the detection logic, in order to get rid of the ugly DMI match stuff when ACPI has what's needed. Regards, Mauro > > So, after applying I have the following log > > # modprobe atomisp > [ 116.215056] atomisp: module is from the staging directory, the quality is unknown, you have been warned. > [ 116.310077] atomisp-isp2 0000:00:03.0: Detected Baytrail version 15 (ISP2400) on VALLEYVIEW C0 (CR) PLATFORM > [ 116.354189] atomisp-isp2 0000:00:03.0: start: 0x50000000 > [ 116.376888] atomisp-isp2 0000:00:03.0: atomisp mmio base: 0000000027f9eb1f > [ 116.401267] ACPI: \: failed to evaluate _DSM (0x1001) > [ 116.423479] atomisp-isp2 0000:00:03.0: Failed to find EFI variable 0000:00:03.0_HpllFreq > [ 116.449254] atomisp-isp2 0000:00:03.0: HpllFreq: using default (2000) > [ 116.473045] atomisp-isp2 0000:00:03.0: ISP HPLL frequency base = 2000 MHz > [ 116.770613] atomisp-isp2 0000:00:03.0: Probing Subdev INT33F8:00 > [ 116.793750] atomisp-isp2 0000:00:03.0: Subdev INT33F8:00 successfully register > [ 116.818155] atomisp-isp2 0000:00:03.0: raw_index: -1 > [ 116.839924] atomisp-isp2 0000:00:03.0: SOC_INDEX: 0 > [ 116.861622] atomisp-isp2 0000:00:03.0: Probing Subdev INTCF1C:00 > [ 116.896885] lm3554 i2c-INTCF1C:00: Failed to power on lm3554 LED flash > [ 116.920236] atomisp-isp2 0000:00:03.0: Subdev INTCF1C:00 detection fail > [ 116.943649] atomisp-isp2 0000:00:03.0: detected 1 camera sensors > [ 116.966177] atomisp-isp2 0000:00:03.0: atomisp_csi_lane_config: the portconfig is 2-1-0, CSI_CONTROL is 0x0002009C > [ 117.009054] atomisp-isp2 0000:00:03.0: Entity type for entity ATOM ISP CSI2-port0 was not initialized! > [ 117.050772] atomisp-isp2 0000:00:03.0: Entity type for entity ATOM ISP CSI2-port1 was not initialized! > [ 117.050795] atomisp-isp2 0000:00:03.0: Entity type for entity ATOM ISP CSI2-port2 was not initialized! > [ 117.134464] atomisp-isp2 0000:00:03.0: Entity type for entity file_input_subdev was not initialized! > [ 117.176572] atomisp-isp2 0000:00:03.0: Entity type for entity tpg_subdev was not initialized! > [ 117.202301] atomisp-isp2 0000:00:03.0: Entity type for entity ATOMISP_SUBDEV_0 was not initialized! > [ 117.246734] atomisp-isp2 0000:00:03.0: Entity type for entity ATOMISP_SUBDEV_1 was not initialized! > [ 117.290990] atomisp-isp2 0000:00:03.0: FILE_INPUT enable, camera_cnt: 1 > [ 117.314607] atomisp-isp2 0000:00:03.0: TPG detected, camera_cnt: 2 > [ 117.341386] atomisp-isp2 0000:00:03.0: atomisp_save_iunit_reg > [ 117.363735] atomisp-isp2 0000:00:03.0: DFS target frequency=200. > [ 117.386272] atomisp-isp2 0000:00:03.0: Programming DFS frequency to 200 > [ 117.409426] atomisp-isp2 0000:00:03.0: waiting for ISPSSPM1 valid bit to be 0. > [ 117.433323] atomisp-isp2 0000:00:03.0: waiting for ISPSSPM1 valid bit to be 0. > [ 117.457139] atomisp-isp2 0000:00:03.0: atomisp_ospm_dphy_down > [ 117.479800] atomisp-isp2 0000:00:03.0: binary #0 type SP: sp > [ 117.502001] atomisp-isp2 0000:00:03.0: binary #1 type ISP (Normal), binary id is 0: isp_copy_var > [ 117.542907] atomisp-isp2 0000:00:03.0: binary #2 type ISP (Normal), binary id is 2: isp_vf_pp_full > [ 117.584666] atomisp-isp2 0000:00:03.0: binary #3 type ISP (Normal), binary id is 3: isp_vf_pp_opt > [ 117.626806] atomisp-isp2 0000:00:03.0: binary #4 type ISP (Normal), binary id is 60: isp_capture_pp_var_bli > [ 117.670360] atomisp-isp2 0000:00:03.0: binary #5 type ISP (Normal), binary id is 61: isp_capture_pp_ldc > [ 117.713655] atomisp-isp2 0000:00:03.0: binary #6 type ISP (Normal), binary id is 5: isp_capture_pp_var > [ 117.757345] atomisp-isp2 0000:00:03.0: binary #7 type ISP (Normal), binary id is 4: isp_yuv_scale_var > [ 117.801371] atomisp-isp2 0000:00:03.0: binary #8 type ISP (Normal), binary id is 6: isp_preisp_var > [ 117.845621] atomisp-isp2 0000:00:03.0: binary #9 type ISP (Normal), binary id is 7: isp_preisp_var_isp2 > [ 117.890913] atomisp-isp2 0000:00:03.0: binary #10 type ISP (Normal), binary id is 58: isp_pre_de_var_isp2 > [ 117.936321] atomisp-isp2 0000:00:03.0: binary #11 type ISP (Normal), binary id is 8: isp_gdc_var > [ 117.963840] atomisp-isp2 0000:00:03.0: binary #12 type ISP (Normal), binary id is 11: isp_anr_var > [ 117.991190] atomisp-isp2 0000:00:03.0: binary #13 type ISP (Normal), binary id is 12: isp_anr_var_isp2 > [ 118.035988] atomisp-isp2 0000:00:03.0: binary #14 type ISP (Normal), binary id is 9: isp_postisp_var > [ 118.081148] atomisp-isp2 0000:00:03.0: binary #15 type ISP (Normal), binary id is 10: isp_postisp_var_isp2 > [ 118.127374] atomisp-isp2 0000:00:03.0: binary #16 type ISP (Normal), binary id is 15: isp_preview_dec > [ 118.173707] atomisp-isp2 0000:00:03.0: binary #17 type ISP (Normal), binary id is 16: isp_preview_cont_bds125_isp2 > [ 118.221920] atomisp-isp2 0000:00:03.0: binary #18 type ISP (Normal), binary id is 18: isp_preview_cont_bds150_isp2 > [ 118.270412] atomisp-isp2 0000:00:03.0: binary #19 type ISP (Normal), binary id is 20: isp_preview_cont_bds200_isp2 > [ 118.318942] atomisp-isp2 0000:00:03.0: binary #20 type ISP (Normal), binary id is 21: isp_preview_var > [ 118.366572] atomisp-isp2 0000:00:03.0: binary #21 type ISP (Normal), binary id is 22: isp_preview_var_isp2 > [ 118.415086] atomisp-isp2 0000:00:03.0: binary #22 type ISP (Normal), binary id is 27: isp_primary_striped > [ 118.464002] atomisp-isp2 0000:00:03.0: binary #23 type ISP (Normal), binary id is 28: isp_primary_striped_isp2 > [ 118.514097] atomisp-isp2 0000:00:03.0: binary #24 type ISP (Normal), binary id is 24: isp_primary_var > [ 118.564053] atomisp-isp2 0000:00:03.0: binary #25 type ISP (Normal), binary id is 25: isp_primary_var_isp2 > [ 118.615276] atomisp-isp2 0000:00:03.0: binary #26 type ISP (Normal), binary id is 26: isp_primary_small > [ 118.666737] atomisp-isp2 0000:00:03.0: binary #27 type ISP (Normal), binary id is 29: isp_primary_8mp > [ 118.718346] atomisp-isp2 0000:00:03.0: binary #28 type ISP (Normal), binary id is 30: isp_primary_14mp > [ 118.770053] atomisp-isp2 0000:00:03.0: binary #29 type ISP (Normal), binary id is 31: isp_primary_16mp > [ 118.821763] atomisp-isp2 0000:00:03.0: binary #30 type ISP (Normal), binary id is 33: isp_primary_isp261_stage0 > [ 118.874370] atomisp-isp2 0000:00:03.0: binary #31 type ISP (Normal), binary id is 34: isp_primary_isp261_stage1 > [ 118.926992] atomisp-isp2 0000:00:03.0: binary #32 type ISP (Normal), binary id is 35: isp_primary_isp261_stage2 > [ 118.979792] atomisp-isp2 0000:00:03.0: binary #33 type ISP (Normal), binary id is 36: isp_primary_isp261_stage3 > [ 119.032714] atomisp-isp2 0000:00:03.0: binary #34 type ISP (Normal), binary id is 37: isp_primary_isp261_stage4 > [ 119.085749] atomisp-isp2 0000:00:03.0: binary #35 type ISP (Normal), binary id is 38: isp_primary_isp261_stage5 > [ 119.139422] atomisp-isp2 0000:00:03.0: binary #36 type ISP (Normal), binary id is 42: isp_video_dz > [ 119.192607] atomisp-isp2 0000:00:03.0: binary #37 type ISP (Normal), binary id is 44: isp_video_high > [ 119.246768] atomisp-isp2 0000:00:03.0: binary #38 type ISP (Normal), binary id is 45: isp_video_nodz > [ 119.301793] atomisp-isp2 0000:00:03.0: binary #39 type ISP (Normal), binary id is 46: isp_video_cont_multibds_isp2_min > [ 119.359159] atomisp-isp2 0000:00:03.0: binary #40 type ISP (Normal), binary id is 47: isp_video_cont_bds_300_600_isp2_min > [ 119.416880] atomisp-isp2 0000:00:03.0: binary #41 type ISP (Normal), binary id is 49: isp_video_cont_bds150_isp2_min > [ 119.474102] atomisp-isp2 0000:00:03.0: binary #42 type ISP (Normal), binary id is 51: isp_video_cont_bds200_isp2_min > [ 119.531365] atomisp-isp2 0000:00:03.0: binary #43 type ISP (Normal), binary id is 52: isp_video_cont_nobds_isp2_min > [ 119.588595] atomisp-isp2 0000:00:03.0: binary #44 type ISP (Normal), binary id is 53: isp_video_dz_isp2_min > [ 119.644981] atomisp-isp2 0000:00:03.0: binary #45 type ISP (Normal), binary id is 54: isp_video_dz_isp2 > [ 119.701015] atomisp-isp2 0000:00:03.0: binary #46 type ISP (Normal), binary id is 55: isp_video_lp_isp2 > > > Andy Shevchenko (15): > media: atomisp: Replace last use of Intel MID APIs > media: atomisp: move CCK endpoint address to generic header > media: atomisp: Use proper APIs to find I²C client device by ACPI HID > media: atomisp: don't pass struct device_driver as parameter > media: atomisp: Get rid of struct pci_dev in struct atomisp_device > media: atomisp: Unify pdev to be pointer to struct pci_device > media: atomisp: Replace direct access to MMIO with proper helpers > media: atomisp: Drop global atomisp_dev variable (easy cases) > media: atomisp: make platform data more readable > media: atomisp: Don't try to parse unexpected ACPI object type > media: atomisp: Make pointer to PMIC client global > media: atomisp: Refactor PMIC detection to a separate function. > media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add() > media: atomisp: Get rid of ugly and leaky ACPI handling in > gmin_subdev_add() > media: atomisp: Deduplicate return ret in gmin_i2c_write() > > arch/x86/include/asm/iosf_mbi.h | 1 + > .../atomisp/include/linux/atomisp_platform.h | 1 + > .../staging/media/atomisp/pci/atomisp-regs.h | 3 - > .../staging/media/atomisp/pci/atomisp_acc.c | 4 +- > .../staging/media/atomisp/pci/atomisp_cmd.c | 57 ++-- > .../staging/media/atomisp/pci/atomisp_cmd.h | 4 +- > .../media/atomisp/pci/atomisp_compat.h | 2 - > .../media/atomisp/pci/atomisp_compat_css20.c | 64 ++-- > .../media/atomisp/pci/atomisp_compat_css20.h | 2 +- > .../staging/media/atomisp/pci/atomisp_drvfs.c | 14 +- > .../staging/media/atomisp/pci/atomisp_drvfs.h | 2 +- > .../media/atomisp/pci/atomisp_gmin_platform.c | 220 +++++++------- > .../media/atomisp/pci/atomisp_internal.h | 2 +- > .../staging/media/atomisp/pci/atomisp_ioctl.c | 19 +- > .../staging/media/atomisp/pci/atomisp_v4l2.c | 277 ++++++++---------- > 15 files changed, 311 insertions(+), 361 deletions(-) > Thanks, Mauro
Em Fri, 26 Jun 2020 15:29:53 +0200 Mauro Carvalho Chehab <mchehab@kernel.org> escreveu: > Hi Andy, > > Em Fri, 26 Jun 2020 15:19:10 +0300 > Andy Shevchenko <andriy.shevchenko@linux.intel.com> escreveu: > > > I'm experimenting with it on Baytrail machine and found some issues. > > Along with fixing them I cleaned up a bit this. > > Thanks for that! Yeah, I found some issues there myself, although > testing on a device with more than one camera is very nice. > > I'll apply your patches on the top of my atomisp tree: > > https://git.linuxtv.org/mchehab/experimental.git/log/?h=atomisp_v5 > > On a very quick look, I suspect that some may rise some conflicts, > as I did some improvements at the detection logic, in order to get > rid of the ugly DMI match stuff when ACPI has what's needed. > > Regards, > Mauro > > > > > So, after applying I have the following log > > > > # modprobe atomisp > > [ 116.215056] atomisp: module is from the staging directory, the quality is unknown, you have been warned. > > [ 116.310077] atomisp-isp2 0000:00:03.0: Detected Baytrail version 15 (ISP2400) on VALLEYVIEW C0 (CR) PLATFORM > > [ 116.354189] atomisp-isp2 0000:00:03.0: start: 0x50000000 > > [ 116.376888] atomisp-isp2 0000:00:03.0: atomisp mmio base: 0000000027f9eb1f > > [ 116.401267] ACPI: \: failed to evaluate _DSM (0x1001) > > [ 116.423479] atomisp-isp2 0000:00:03.0: Failed to find EFI variable 0000:00:03.0_HpllFreq > > [ 116.449254] atomisp-isp2 0000:00:03.0: HpllFreq: using default (2000) > > [ 116.473045] atomisp-isp2 0000:00:03.0: ISP HPLL frequency base = 2000 MHz > > [ 116.770613] atomisp-isp2 0000:00:03.0: Probing Subdev INT33F8:00 > > [ 116.793750] atomisp-isp2 0000:00:03.0: Subdev INT33F8:00 successfully register > > [ 116.818155] atomisp-isp2 0000:00:03.0: raw_index: -1 > > [ 116.839924] atomisp-isp2 0000:00:03.0: SOC_INDEX: 0 > > [ 116.861622] atomisp-isp2 0000:00:03.0: Probing Subdev INTCF1C:00 > > [ 116.896885] lm3554 i2c-INTCF1C:00: Failed to power on lm3554 LED flash > > [ 116.920236] atomisp-isp2 0000:00:03.0: Subdev INTCF1C:00 detection fail > > [ 116.943649] atomisp-isp2 0000:00:03.0: detected 1 camera sensors > > [ 116.966177] atomisp-isp2 0000:00:03.0: atomisp_csi_lane_config: the portconfig is 2-1-0, CSI_CONTROL is 0x0002009C > > [ 117.009054] atomisp-isp2 0000:00:03.0: Entity type for entity ATOM ISP CSI2-port0 was not initialized! > > [ 117.050772] atomisp-isp2 0000:00:03.0: Entity type for entity ATOM ISP CSI2-port1 was not initialized! > > [ 117.050795] atomisp-isp2 0000:00:03.0: Entity type for entity ATOM ISP CSI2-port2 was not initialized! > > [ 117.134464] atomisp-isp2 0000:00:03.0: Entity type for entity file_input_subdev was not initialized! > > [ 117.176572] atomisp-isp2 0000:00:03.0: Entity type for entity tpg_subdev was not initialized! > > [ 117.202301] atomisp-isp2 0000:00:03.0: Entity type for entity ATOMISP_SUBDEV_0 was not initialized! > > [ 117.246734] atomisp-isp2 0000:00:03.0: Entity type for entity ATOMISP_SUBDEV_1 was not initialized! > > [ 117.290990] atomisp-isp2 0000:00:03.0: FILE_INPUT enable, camera_cnt: 1 > > [ 117.314607] atomisp-isp2 0000:00:03.0: TPG detected, camera_cnt: 2 > > [ 117.341386] atomisp-isp2 0000:00:03.0: atomisp_save_iunit_reg > > [ 117.363735] atomisp-isp2 0000:00:03.0: DFS target frequency=200. > > [ 117.386272] atomisp-isp2 0000:00:03.0: Programming DFS frequency to 200 > > [ 117.409426] atomisp-isp2 0000:00:03.0: waiting for ISPSSPM1 valid bit to be 0. > > [ 117.433323] atomisp-isp2 0000:00:03.0: waiting for ISPSSPM1 valid bit to be 0. > > [ 117.457139] atomisp-isp2 0000:00:03.0: atomisp_ospm_dphy_down > > [ 117.479800] atomisp-isp2 0000:00:03.0: binary #0 type SP: sp > > [ 117.502001] atomisp-isp2 0000:00:03.0: binary #1 type ISP (Normal), binary id is 0: isp_copy_var > > [ 117.542907] atomisp-isp2 0000:00:03.0: binary #2 type ISP (Normal), binary id is 2: isp_vf_pp_full > > [ 117.584666] atomisp-isp2 0000:00:03.0: binary #3 type ISP (Normal), binary id is 3: isp_vf_pp_opt > > [ 117.626806] atomisp-isp2 0000:00:03.0: binary #4 type ISP (Normal), binary id is 60: isp_capture_pp_var_bli > > [ 117.670360] atomisp-isp2 0000:00:03.0: binary #5 type ISP (Normal), binary id is 61: isp_capture_pp_ldc > > [ 117.713655] atomisp-isp2 0000:00:03.0: binary #6 type ISP (Normal), binary id is 5: isp_capture_pp_var > > [ 117.757345] atomisp-isp2 0000:00:03.0: binary #7 type ISP (Normal), binary id is 4: isp_yuv_scale_var > > [ 117.801371] atomisp-isp2 0000:00:03.0: binary #8 type ISP (Normal), binary id is 6: isp_preisp_var > > [ 117.845621] atomisp-isp2 0000:00:03.0: binary #9 type ISP (Normal), binary id is 7: isp_preisp_var_isp2 > > [ 117.890913] atomisp-isp2 0000:00:03.0: binary #10 type ISP (Normal), binary id is 58: isp_pre_de_var_isp2 > > [ 117.936321] atomisp-isp2 0000:00:03.0: binary #11 type ISP (Normal), binary id is 8: isp_gdc_var > > [ 117.963840] atomisp-isp2 0000:00:03.0: binary #12 type ISP (Normal), binary id is 11: isp_anr_var > > [ 117.991190] atomisp-isp2 0000:00:03.0: binary #13 type ISP (Normal), binary id is 12: isp_anr_var_isp2 > > [ 118.035988] atomisp-isp2 0000:00:03.0: binary #14 type ISP (Normal), binary id is 9: isp_postisp_var > > [ 118.081148] atomisp-isp2 0000:00:03.0: binary #15 type ISP (Normal), binary id is 10: isp_postisp_var_isp2 > > [ 118.127374] atomisp-isp2 0000:00:03.0: binary #16 type ISP (Normal), binary id is 15: isp_preview_dec > > [ 118.173707] atomisp-isp2 0000:00:03.0: binary #17 type ISP (Normal), binary id is 16: isp_preview_cont_bds125_isp2 > > [ 118.221920] atomisp-isp2 0000:00:03.0: binary #18 type ISP (Normal), binary id is 18: isp_preview_cont_bds150_isp2 > > [ 118.270412] atomisp-isp2 0000:00:03.0: binary #19 type ISP (Normal), binary id is 20: isp_preview_cont_bds200_isp2 > > [ 118.318942] atomisp-isp2 0000:00:03.0: binary #20 type ISP (Normal), binary id is 21: isp_preview_var > > [ 118.366572] atomisp-isp2 0000:00:03.0: binary #21 type ISP (Normal), binary id is 22: isp_preview_var_isp2 > > [ 118.415086] atomisp-isp2 0000:00:03.0: binary #22 type ISP (Normal), binary id is 27: isp_primary_striped > > [ 118.464002] atomisp-isp2 0000:00:03.0: binary #23 type ISP (Normal), binary id is 28: isp_primary_striped_isp2 > > [ 118.514097] atomisp-isp2 0000:00:03.0: binary #24 type ISP (Normal), binary id is 24: isp_primary_var > > [ 118.564053] atomisp-isp2 0000:00:03.0: binary #25 type ISP (Normal), binary id is 25: isp_primary_var_isp2 > > [ 118.615276] atomisp-isp2 0000:00:03.0: binary #26 type ISP (Normal), binary id is 26: isp_primary_small > > [ 118.666737] atomisp-isp2 0000:00:03.0: binary #27 type ISP (Normal), binary id is 29: isp_primary_8mp > > [ 118.718346] atomisp-isp2 0000:00:03.0: binary #28 type ISP (Normal), binary id is 30: isp_primary_14mp > > [ 118.770053] atomisp-isp2 0000:00:03.0: binary #29 type ISP (Normal), binary id is 31: isp_primary_16mp > > [ 118.821763] atomisp-isp2 0000:00:03.0: binary #30 type ISP (Normal), binary id is 33: isp_primary_isp261_stage0 > > [ 118.874370] atomisp-isp2 0000:00:03.0: binary #31 type ISP (Normal), binary id is 34: isp_primary_isp261_stage1 > > [ 118.926992] atomisp-isp2 0000:00:03.0: binary #32 type ISP (Normal), binary id is 35: isp_primary_isp261_stage2 > > [ 118.979792] atomisp-isp2 0000:00:03.0: binary #33 type ISP (Normal), binary id is 36: isp_primary_isp261_stage3 > > [ 119.032714] atomisp-isp2 0000:00:03.0: binary #34 type ISP (Normal), binary id is 37: isp_primary_isp261_stage4 > > [ 119.085749] atomisp-isp2 0000:00:03.0: binary #35 type ISP (Normal), binary id is 38: isp_primary_isp261_stage5 > > [ 119.139422] atomisp-isp2 0000:00:03.0: binary #36 type ISP (Normal), binary id is 42: isp_video_dz > > [ 119.192607] atomisp-isp2 0000:00:03.0: binary #37 type ISP (Normal), binary id is 44: isp_video_high > > [ 119.246768] atomisp-isp2 0000:00:03.0: binary #38 type ISP (Normal), binary id is 45: isp_video_nodz > > [ 119.301793] atomisp-isp2 0000:00:03.0: binary #39 type ISP (Normal), binary id is 46: isp_video_cont_multibds_isp2_min > > [ 119.359159] atomisp-isp2 0000:00:03.0: binary #40 type ISP (Normal), binary id is 47: isp_video_cont_bds_300_600_isp2_min > > [ 119.416880] atomisp-isp2 0000:00:03.0: binary #41 type ISP (Normal), binary id is 49: isp_video_cont_bds150_isp2_min > > [ 119.474102] atomisp-isp2 0000:00:03.0: binary #42 type ISP (Normal), binary id is 51: isp_video_cont_bds200_isp2_min > > [ 119.531365] atomisp-isp2 0000:00:03.0: binary #43 type ISP (Normal), binary id is 52: isp_video_cont_nobds_isp2_min > > [ 119.588595] atomisp-isp2 0000:00:03.0: binary #44 type ISP (Normal), binary id is 53: isp_video_dz_isp2_min > > [ 119.644981] atomisp-isp2 0000:00:03.0: binary #45 type ISP (Normal), binary id is 54: isp_video_dz_isp2 > > [ 119.701015] atomisp-isp2 0000:00:03.0: binary #46 type ISP (Normal), binary id is 55: isp_video_lp_isp2 > > Ok, I merged the patches on my atomisp tree: https://git.linuxtv.org/mchehab/experimental.git/log/?h=atomisp_v5 I'll wait for Sakari's review on them (and on my patches) before applying on media master tree. As some of the stuff here are fixes (and this driver is new for 5.8), I'll probably submit them to v5.8-rc. > > > > Andy Shevchenko (15): > > media: atomisp: Replace last use of Intel MID APIs > > media: atomisp: move CCK endpoint address to generic header > > media: atomisp: Use proper APIs to find I²C client device by ACPI HID > > media: atomisp: don't pass struct device_driver as parameter > > media: atomisp: Get rid of struct pci_dev in struct atomisp_device > > media: atomisp: Unify pdev to be pointer to struct pci_device > > media: atomisp: Replace direct access to MMIO with proper helpers > > media: atomisp: Drop global atomisp_dev variable (easy cases) > > media: atomisp: make platform data more readable > > media: atomisp: Don't try to parse unexpected ACPI object type The above patches applied fine. > > media: atomisp: Make pointer to PMIC client global I had to rebase this one, but also applied fine. > > media: atomisp: Refactor PMIC detection to a separate function. > > media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add() Could you please rebase those on the top of my atomisp branch? > > media: atomisp: Get rid of ugly and leaky ACPI handling in > > gmin_subdev_add() The part of the code that used to call acpi_bus_get_device() was already removed by a previous patch on my tree. So, I guess this one may not be needed anymore. > > media: atomisp: Deduplicate return ret in gmin_i2c_write() This one also applied as-is. Thanks, Mauro
On Fri, Jun 26, 2020 at 04:01:41PM +0200, Mauro Carvalho Chehab wrote: > Em Fri, 26 Jun 2020 15:29:53 +0200 > Mauro Carvalho Chehab <mchehab@kernel.org> escreveu: > > Em Fri, 26 Jun 2020 15:19:10 +0300 > > Andy Shevchenko <andriy.shevchenko@linux.intel.com> escreveu: > > > media: atomisp: Refactor PMIC detection to a separate function. > > > media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add() > > Could you please rebase those on the top of my atomisp branch? > > > > media: atomisp: Get rid of ugly and leaky ACPI handling in > > > gmin_subdev_add() > > The part of the code that used to call acpi_bus_get_device() was > already removed by a previous patch on my tree. So, I guess this one > may not be needed anymore. Mentioned above have been rebased and I'm about to send a v2.