@@ -10,6 +10,9 @@
#include "omap3.dtsi"
+/* AM3517 doesn't appear to have the crypto engines defined in omap3.dtsi */
+/delete-node/ &aes1_target;
+
/ {
aliases {
serial3 = &uart4;
@@ -157,13 +157,56 @@ omap3_pmx_wkup: pinmux@a00 {
};
};
- aes: aes@480c5000 {
- compatible = "ti,omap3-aes";
- ti,hwmods = "aes";
- reg = <0x480c5000 0x50>;
- interrupts = <0>;
- dmas = <&sdma 65 &sdma 66>;
- dma-names = "tx", "rx";
+ aes1_target: target-module@480a6000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x480a6044 0x4>,
+ <0x480a6048 0x4>,
+ <0x480a604c 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&aes1_ick>;
+ clock-names = "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x480a6000 0x2000>;
+
+ aes1: aes1@0 {
+ compatible = "ti,omap3-aes";
+ reg = <0 0x50>;
+ interrupts = <0>;
+ dmas = <&sdma 9 &sdma 10>;
+ dma-names = "tx", "rx";
+ };
+ };
+
+ aes2_target: target-module@480c5000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x480c5044 0x4>,
+ <0x480c5048 0x4>,
+ <0x480c504c 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&aes2_ick>;
+ clock-names = "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x480c5000 0x2000>;
+
+ aes2: aes2@0 {
+ compatible = "ti,omap3-aes";
+ reg = <0 0x50>;
+ interrupts = <0>;
+ dmas = <&sdma 65 &sdma 66>;
+ dma-names = "tx", "rx";
+ };
};
prm: prm@48306000 {
@@ -2342,44 +2342,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__sham = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_core -> AES */
-static struct omap_hwmod_class_sysconfig omap3_aes_sysc = {
- .rev_offs = 0x44,
- .sysc_offs = 0x48,
- .syss_offs = 0x4c,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap3xxx_aes_sysc_fields,
-};
-
-static struct omap_hwmod_class omap3xxx_aes_class = {
- .name = "aes",
- .sysc = &omap3_aes_sysc,
-};
-
-
-static struct omap_hwmod omap3xxx_aes_hwmod = {
- .name = "aes",
- .main_clk = "aes2_ick",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_AES2_SHIFT,
- },
- },
- .class = &omap3xxx_aes_class,
-};
-
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_aes_hwmod,
- .clk = "aes2_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/*
* 'ssi' class
* synchronous serial interface (multichannel and full-duplex serial if)
@@ -2473,20 +2435,11 @@ static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = {
NULL,
};
-static struct omap_hwmod_ocp_if *omap34xx_aes_hwmod_ocp_ifs[] __initdata = {
- &omap3xxx_l4_core__aes,
- NULL,
-};
-
static struct omap_hwmod_ocp_if *omap36xx_sham_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__sham,
NULL
};
-static struct omap_hwmod_ocp_if *omap36xx_aes_hwmod_ocp_ifs[] __initdata = {
- &omap3xxx_l4_core__aes,
- NULL
-};
/*
* Apparently the SHA/MD5 and AES accelerator IP blocks are
@@ -2501,11 +2454,6 @@ static struct omap_hwmod_ocp_if *am35xx_sham_hwmod_ocp_ifs[] __initdata = {
NULL
};
-static struct omap_hwmod_ocp_if *am35xx_aes_hwmod_ocp_ifs[] __initdata = {
- /* &omap3xxx_l4_core__aes, */
- NULL,
-};
-
/* 3430ES1-only hwmod links */
static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = {
&omap3430es1_dss__l3,
@@ -2641,7 +2589,6 @@ int __init omap3xxx_hwmod_init(void)
{
int r;
struct omap_hwmod_ocp_if **h = NULL, **h_sham = NULL;
- struct omap_hwmod_ocp_if **h_aes = NULL;
struct device_node *bus;
unsigned int rev;
@@ -2664,16 +2611,13 @@ int __init omap3xxx_hwmod_init(void)
rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
h = omap34xx_hwmod_ocp_ifs;
h_sham = omap34xx_sham_hwmod_ocp_ifs;
- h_aes = omap34xx_aes_hwmod_ocp_ifs;
} else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) {
h = am35xx_hwmod_ocp_ifs;
h_sham = am35xx_sham_hwmod_ocp_ifs;
- h_aes = am35xx_aes_hwmod_ocp_ifs;
} else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
rev == OMAP3630_REV_ES1_2) {
h = omap36xx_hwmod_ocp_ifs;
h_sham = omap36xx_sham_hwmod_ocp_ifs;
- h_aes = omap36xx_aes_hwmod_ocp_ifs;
} else {
WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
return -EINVAL;
@@ -2696,11 +2640,6 @@ int __init omap3xxx_hwmod_init(void)
goto put_node;
}
- if (h_aes && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "aes")) {
- r = omap_hwmod_register_links(h_aes);
- if (r < 0)
- goto put_node;
- }
of_node_put(bus);
/*
Various OMAP3 boards have two AES blocks, but only one is currently available, because the hwmods are only configured for one. This patch migrates the hwmods for the AES engine to sysc-omap2 which allows the second AES crypto engine to become available. omap-aes 480a6000.aes1: OMAP AES hw accel rev: 2.6 omap-aes 480a6000.aes1: will run requests pump with realtime priority omap-aes 480c5000.aes2: OMAP AES hw accel rev: 2.6 omap-aes 480c5000.aes2: will run requests pump with realtime priority Signed-off-by: Adam Ford <aford173@gmail.com> --- V2: Fix DMA for AES1, and remove from AM3517.