Message ID | 20200625101757.101775-7-enric.balletbo@collabora.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | arm64: dts: mediatek: Add support for Lenovo IdeaPad Duet Chromebook | expand |
On Thu, Jun 25, 2020 at 6:18 PM Enric Balletbo i Serra <enric.balletbo@collabora.com> wrote: > > Add the USB3.0 phyter and controller for the MediaTek's MT8183 SoC. > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > > Changes in v2: > - Move adding #phy-cells to this patch. (Matthias Brugger) > > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 58 ++++++++++++++++++++++++ > 1 file changed, 58 insertions(+) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi > index 6c00ffa275202..102105871db25 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi > @@ -9,6 +9,7 @@ > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/reset-controller/mt8183-resets.h> > +#include <dt-bindings/phy/phy.h> > #include "mt8183-pinfunc.h" > > / { > @@ -648,6 +649,36 @@ i2c8: i2c@1101b000 { > status = "disabled"; > }; > > + ssusb: usb@11201000 { > + compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; > + reg = <0 0x11201000 0 0x2e00>, > + <0 0x11203e00 0 0x0100>; > + reg-names = "mac", "ippc"; > + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; > + phys = <&u2port0 PHY_TYPE_USB2>, > + <&u3port0 PHY_TYPE_USB3>; > + clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>, > + <&infracfg CLK_INFRA_USB>; > + clock-names = "sys_ck", "ref_ck"; > + mediatek,syscon-wakeup = <&pericfg 0x400 0>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + status = "disabled"; > + > + usb_host: xhci@11200000 { > + compatible = "mediatek,mt8183-xhci", > + "mediatek,mtk-xhci"; > + reg = <0 0x11200000 0 0x1000>; > + reg-names = "mac"; > + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>, > + <&infracfg CLK_INFRA_USB>; > + clock-names = "sys_ck", "ref_ck"; > + status = "disabled"; > + }; > + }; > + > audiosys: syscon@11220000 { > compatible = "mediatek,mt8183-audiosys", "syscon"; > reg = <0 0x11220000 0 0x1000>; > @@ -684,6 +715,33 @@ efuse: efuse@11f10000 { > reg = <0 0x11f10000 0 0x1000>; > }; > > + u3phy: usb-phy@11f40000 { > + compatible = "mediatek,mt8183-tphy", > + "mediatek,generic-tphy-v2"; > + #address-cells = <1>; > + #phy-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0 0x11f40000 0x1000>; > + status = "okay"; > + > + u2port0: usb-phy@0 { > + reg = <0x0 0x700>; > + clocks = <&clk26m>; > + clock-names = "ref"; > + #phy-cells = <1>; > + mediatek,discth = <15>; > + status = "okay"; > + }; > + > + u3port0: usb-phy@0700 { > + reg = <0x0700 0x900>; > + clocks = <&clk26m>; > + clock-names = "ref"; > + #phy-cells = <1>; > + status = "okay"; > + }; > + }; > + > mfgcfg: syscon@13000000 { > compatible = "mediatek,mt8183-mfgcfg", "syscon"; > reg = <0 0x13000000 0 0x1000>; > -- > 2.27.0 >
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 6c00ffa275202..102105871db25 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/reset-controller/mt8183-resets.h> +#include <dt-bindings/phy/phy.h> #include "mt8183-pinfunc.h" / { @@ -648,6 +649,36 @@ i2c8: i2c@1101b000 { status = "disabled"; }; + ssusb: usb@11201000 { + compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; + reg = <0 0x11201000 0 0x2e00>, + <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>; + clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>, + <&infracfg CLK_INFRA_USB>; + clock-names = "sys_ck", "ref_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb_host: xhci@11200000 { + compatible = "mediatek,mt8183-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>, + <&infracfg CLK_INFRA_USB>; + clock-names = "sys_ck", "ref_ck"; + status = "disabled"; + }; + }; + audiosys: syscon@11220000 { compatible = "mediatek,mt8183-audiosys", "syscon"; reg = <0 0x11220000 0 0x1000>; @@ -684,6 +715,33 @@ efuse: efuse@11f10000 { reg = <0 0x11f10000 0 0x1000>; }; + u3phy: usb-phy@11f40000 { + compatible = "mediatek,mt8183-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #phy-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11f40000 0x1000>; + status = "okay"; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + mediatek,discth = <15>; + status = "okay"; + }; + + u3port0: usb-phy@0700 { + reg = <0x0700 0x900>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + mfgcfg: syscon@13000000 { compatible = "mediatek,mt8183-mfgcfg", "syscon"; reg = <0 0x13000000 0 0x1000>;
Add the USB3.0 phyter and controller for the MediaTek's MT8183 SoC. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> --- Changes in v2: - Move adding #phy-cells to this patch. (Matthias Brugger) arch/arm64/boot/dts/mediatek/mt8183.dtsi | 58 ++++++++++++++++++++++++ 1 file changed, 58 insertions(+)