| Message ID | 20200625101757.101775-8-enric.balletbo@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: mediatek: Add support for Lenovo IdeaPad Duet Chromebook | expand |
On Thu, Jun 25, 2020 at 6:18 PM Enric Balletbo i Serra <enric.balletbo@collabora.com> wrote: > > Also known as the Lenovo IdeaPad Duet Chromebook. > > There are different krane boards with shared resources, hence a > mt8183-kukui-krane.dtsi was created for easily introduce future new > boards. The same happens with the baseboard codenamed kukui where > different variants, apart from kukui variant can take advantage of the > shared resources. > > Signed-off-by: Ben Ho <Ben.Ho@mediatek.com> > [originally created by Ben Ho but adapted and ported to mainline] > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > > Changes in v2: > - Move adding #phy-cells out of this patch. (Matthias Brugger) > > arch/arm64/boot/dts/mediatek/Makefile | 1 + > .../mediatek/mt8183-kukui-krane-sku176.dts | 18 + > .../boot/dts/mediatek/mt8183-kukui-krane.dtsi | 343 ++++++++ > .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 788 ++++++++++++++++++ > 4 files changed, 1150 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi > create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 848218f55bc1d..708fc60fa589a 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -12,4 +12,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts > new file mode 100644 > index 0000000000000..47113e275cb52 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts > @@ -0,0 +1,18 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > +/* > + * Copyright 2019 Google LLC > + * > + * Device-tree for Krane sku176. > + * > + * SKU is a 8-bit value (0xb0 == 176): > + * - Bits 7..4: Panel ID: 0xb (BOE) > + * - Bits 3..0: SKU ID: 0x0 (default) > + */ > + > +/dts-v1/; > +#include "mt8183-kukui-krane.dtsi" > + > +/ { > + model = "MediaTek krane sku176 board"; > + compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183"; > +}; > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi > new file mode 100644 > index 0000000000000..fbc471ccf805f > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi > @@ -0,0 +1,343 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > +/* > + * Copyright 2019 Google LLC > + */ > + > +#include "mt8183-kukui.dtsi" > + > +/ { > + ppvarn_lcd: ppvarn-lcd { > + compatible = "regulator-fixed"; > + regulator-name = "ppvarn_lcd"; > + pinctrl-names = "default"; > + pinctrl-0 = <&ppvarn_lcd_en>; > + > + enable-active-high; > + > + gpio = <&pio 66 GPIO_ACTIVE_HIGH>; > + }; > + > + ppvarp_lcd: ppvarp-lcd { > + compatible = "regulator-fixed"; > + regulator-name = "ppvarp_lcd"; > + pinctrl-names = "default"; > + pinctrl-0 = <&ppvarp_lcd_en>; > + > + enable-active-high; > + > + gpio = <&pio 166 GPIO_ACTIVE_HIGH>; > + }; > + > + pp1800_lcd: pp1800-lcd { > + compatible = "regulator-fixed"; > + regulator-name = "pp1800_lcd"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pp1800_lcd_en>; > + > + enable-active-high; > + > + gpio = <&pio 36 GPIO_ACTIVE_HIGH>; > + }; > +}; > + > +&bluetooth { > + firmware-name = "nvm_00440302_i2s_eu.bin"; > +}; > + > +&i2c0 { > + status = "okay"; > + > + touchscreen4: touchscreen@5d { > + compatible = "hid-over-i2c"; > + reg = <0x5d>; > + pinctrl-names = "default"; > + pinctrl-0 = <&open_touch>; > + > + interrupt-parent = <&pio>; > + interrupts = <155 IRQ_TYPE_EDGE_FALLING>; > + > + post-power-on-delay-ms = <10>; > + hid-descr-addr = <0x0001>; > + }; > +}; > + > +&mt6358_vcama2_reg { > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > +}; > + > +&i2c2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c2_pins>; > + status = "okay"; > + clock-frequency = <400000>; > + > + eeprom@58 { > + compatible = "atmel,24c32"; > + reg = <0x58>; > + pagesize = <32>; > + }; > +}; > + > +&i2c4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c4_pins>; > + status = "okay"; > + clock-frequency = <400000>; > + > + eeprom@54 { > + compatible = "atmel,24c32"; > + reg = <0x54>; > + pagesize = <32>; > + }; > +}; > + > +&pio { > + /* 192 lines */ > + gpio-line-names = > + "SPI_AP_EC_CS_L", > + "SPI_AP_EC_MOSI", > + "SPI_AP_EC_CLK", > + "I2S3_DO", > + "USB_PD_INT_ODL", > + "", > + "", > + "", > + "", > + "IT6505_HPD_L", > + "I2S3_TDM_D3", > + "SOC_I2C6_1V8_SCL", > + "SOC_I2C6_1V8_SDA", > + "DPI_D0", > + "DPI_D1", > + "DPI_D2", > + "DPI_D3", > + "DPI_D4", > + "DPI_D5", > + "DPI_D6", > + "DPI_D7", > + "DPI_D8", > + "DPI_D9", > + "DPI_D10", > + "DPI_D11", > + "DPI_HSYNC", > + "DPI_VSYNC", > + "DPI_DE", > + "DPI_CK", > + "AP_MSDC1_CLK", > + "AP_MSDC1_DAT3", > + "AP_MSDC1_CMD", > + "AP_MSDC1_DAT0", > + "AP_MSDC1_DAT2", > + "AP_MSDC1_DAT1", > + "", > + "", > + "", > + "", > + "", > + "", > + "OTG_EN", > + "DRVBUS", > + "DISP_PWM", > + "DSI_TE", > + "LCM_RST_1V8", > + "AP_CTS_WIFI_RTS", > + "AP_RTS_WIFI_CTS", > + "SOC_I2C5_1V8_SCL", > + "SOC_I2C5_1V8_SDA", > + "SOC_I2C3_1V8_SCL", > + "SOC_I2C3_1V8_SDA", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "SOC_I2C1_1V8_SDA", > + "SOC_I2C0_1V8_SDA", > + "SOC_I2C0_1V8_SCL", > + "SOC_I2C1_1V8_SCL", > + "AP_SPI_H1_MISO", > + "AP_SPI_H1_CS_L", > + "AP_SPI_H1_MOSI", > + "AP_SPI_H1_CLK", > + "I2S5_BCK", > + "I2S5_LRCK", > + "I2S5_DO", > + "BOOTBLOCK_EN_L", > + "MT8183_KPCOL0", > + "SPI_AP_EC_MISO", > + "UART_DBG_TX_AP_RX", > + "UART_AP_TX_DBG_RX", > + "I2S2_MCK", > + "I2S2_BCK", > + "CLK_5M_WCAM", > + "CLK_2M_UCAM", > + "I2S2_LRCK", > + "I2S2_DI", > + "SOC_I2C2_1V8_SCL", > + "SOC_I2C2_1V8_SDA", > + "SOC_I2C4_1V8_SCL", > + "SOC_I2C4_1V8_SDA", > + "", > + "SCL8", > + "SDA8", > + "FCAM_PWDN_L", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "I2S_PMIC", > + "I2S_PMIC", > + "I2S_PMIC", > + "I2S_PMIC", > + "I2S_PMIC", > + "I2S_PMIC", > + "I2S_PMIC", > + "I2S_PMIC", > + "", > + "", > + "", > + "", > + "", > + "", > + /* > + * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics > + * call it BIOS_FLASH_WP_R_L. > + */ > + "AP_FLASH_WP_L", > + "EC_AP_INT_ODL", > + "IT6505_INT_ODL", > + "H1_INT_OD_L", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "AP_SPI_FLASH_MISO", > + "AP_SPI_FLASH_CS_L", > + "AP_SPI_FLASH_MOSI", > + "AP_SPI_FLASH_CLK", > + "DA7219_IRQ", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + ""; > + > + ppvarp_lcd_en: ppvarp-lcd-en { > + pins1 { > + pinmux = <PINMUX_GPIO66__FUNC_GPIO66>; > + output-low; > + }; > + }; > + > + ppvarn_lcd_en: ppvarn-lcd-en { > + pins1 { > + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>; > + output-low; > + }; > + }; > + > + pp1800_lcd_en: pp1800-lcd-en { > + pins1 { > + pinmux = <PINMUX_GPIO36__FUNC_GPIO36>; > + output-low; > + }; > + }; > + > + open_touch: open_touch { > + irq_pin { > + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>; > + input-enable; > + bias-pull-up; > + }; > + > + rst_pin { > + pinmux = <PINMUX_GPIO156__FUNC_GPIO156>; > + > + /* > + * The pen driver doesn't currently support driving > + * this reset line. By specifying output-high here > + * we're relying on the fact that this pin has a default > + * pulldown at boot (which makes sure the pen was in > + * reset if it was powered) and then we set it high here > + * to take it out of reset. Better would be if the pen > + * driver could control this and we could remove > + * "output-high" here. > + */ > + output-high; > + }; > + }; > +}; > + > +&qca_wifi { > + qcom,ath10k-calibration-variant = "LE_Krane"; > +}; > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > new file mode 100644 > index 0000000000000..f0a070535b340 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > @@ -0,0 +1,788 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > +/* > + * Copyright (c) 2018 MediaTek Inc. > + * Author: Ben Ho <ben.ho@mediatek.com> > + * Erin Lo <erin.lo@mediatek.com> > + */ > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include "mt8183.dtsi" > +#include "mt6358.dtsi" > + > +/ { > + aliases { > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0 0x40000000 0 0x80000000>; > + }; > + > + clk32k: oscillator1 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + clock-output-names = "clk32k"; > + }; > + > + it6505_pp18_reg: regulator0 { > + compatible = "regulator-fixed"; > + regulator-name = "it6505_pp18"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + gpio = <&pio 178 0>; > + enable-active-high; > + }; > + > + lcd_pp3300: regulator1 { > + compatible = "regulator-fixed"; > + regulator-name = "lcd_pp3300"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + bl_pp5000: regulator2 { > + compatible = "regulator-fixed"; > + regulator-name = "bl_pp5000"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + mmc1_fixed_power: regulator3 { > + compatible = "regulator-fixed"; > + regulator-name = "mmc1_power"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + mmc1_fixed_io: regulator4 { > + compatible = "regulator-fixed"; > + regulator-name = "mmc1_io"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + pp1800_alw: regulator5 { > + compatible = "regulator-fixed"; > + regulator-name = "pp1800_alw"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + pp3300_alw: regulator6 { > + compatible = "regulator-fixed"; > + regulator-name = "pp3300_alw"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + max98357a: codec0 { > + compatible = "maxim,max98357a"; > + sdmode-gpios = <&pio 175 0>; > + }; > + > + btsco: codec1 { > + compatible = "linux,bt-sco"; > + }; > + > + wifi_pwrseq: wifi-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_pins_pwrseq>; > + > + /* Toggle WIFI_ENABLE to reset the chip. */ > + reset-gpios = <&pio 119 1>; > + }; > + > + wifi_wakeup: wifi-wakeup { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_pins_wakeup>; > + > + wowlan { > + label = "Wake on WiFi"; > + gpios = <&pio 113 GPIO_ACTIVE_HIGH>; > + linux,code = <KEY_WAKEUP>; > + wakeup-source; > + }; > + }; > + > + tboard_thermistor1: thermal-sensor1 { > + compatible = "generic-adc-thermal"; > + #thermal-sensor-cells = <0>; > + io-channels = <&auxadc 0>; > + io-channel-names = "sensor-channel"; > + temperature-lookup-table = < (-5000) 4241 > + 0 4063 > + 5000 3856 > + 10000 3621 > + 15000 3364 > + 20000 3091 > + 25000 2810 > + 30000 2526 > + 35000 2247 > + 40000 1982 > + 45000 1734 > + 50000 1507 > + 55000 1305 > + 60000 1122 > + 65000 964 > + 70000 827 > + 75000 710 > + 80000 606 > + 85000 519 > + 90000 445 > + 95000 382 > + 100000 330 > + 105000 284 > + 110000 245 > + 115000 213 > + 120000 183 > + 125000 161>; > + }; > + > + tboard_thermistor2: thermal-sensor2 { > + compatible = "generic-adc-thermal"; > + #thermal-sensor-cells = <0>; > + io-channels = <&auxadc 1>; > + io-channel-names = "sensor-channel"; > + temperature-lookup-table = < (-5000) 4241 > + 0 4063 > + 5000 3856 > + 10000 3621 > + 15000 3364 > + 20000 3091 > + 25000 2810 > + 30000 2526 > + 35000 2247 > + 40000 1982 > + 45000 1734 > + 50000 1507 > + 55000 1305 > + 60000 1122 > + 65000 964 > + 70000 827 > + 75000 710 > + 80000 606 > + 85000 519 > + 90000 445 > + 95000 382 > + 100000 330 > + 105000 284 > + 110000 245 > + 115000 213 > + 120000 183 > + 125000 161>; > + }; > +}; > + > +&auxadc { > + status = "okay"; > +}; > + > +&cpu0 { > + proc-supply = <&mt6358_vproc12_reg>; > +}; > + > +&cpu1 { > + proc-supply = <&mt6358_vproc12_reg>; > +}; > + > +&cpu2 { > + proc-supply = <&mt6358_vproc12_reg>; > +}; > + > +&cpu3 { > + proc-supply = <&mt6358_vproc12_reg>; > +}; > + > +&cpu4 { > + proc-supply = <&mt6358_vproc11_reg>; > +}; > + > +&cpu5 { > + proc-supply = <&mt6358_vproc11_reg>; > +}; > + > +&cpu6 { > + proc-supply = <&mt6358_vproc11_reg>; > +}; > + > +&cpu7 { > + proc-supply = <&mt6358_vproc11_reg>; > +}; > + > +&i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins>; > + status = "okay"; > + clock-frequency = <400000>; > + #address-cells = <1>; > + #size-cells = <0>; > +}; > + > +&i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_pins>; > + status = "okay"; > + clock-frequency = <100000>; > +}; > + > +&i2c3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c3_pins>; > + status = "okay"; > + clock-frequency = <100000>; > + #address-cells = <1>; > + #size-cells = <0>; > +}; > + > +&i2c5 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c5_pins>; > + status = "okay"; > + clock-frequency = <100000>; > + #address-cells = <1>; > + #size-cells = <0>; > +}; > + > +&i2c6 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c6_pins>; > + status = "okay"; > + clock-frequency = <100000>; > +}; > + > +&mmc0 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc0_pins_default>; > + pinctrl-1 = <&mmc0_pins_uhs>; > + bus-width = <8>; > + max-frequency = <200000000>; > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > + mmc-hs400-1_8v; > + cap-mmc-hw-reset; > + no-sdio; > + no-sd; > + hs400-ds-delay = <0x12814>; > + vmmc-supply = <&mt6358_vemc_reg>; > + vqmmc-supply = <&mt6358_vio18_reg>; > + assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>; > + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>; > + non-removable; > +}; > + > +&mmc1 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc1_pins_default>; > + pinctrl-1 = <&mmc1_pins_uhs>; > + vmmc-supply = <&mmc1_fixed_power>; > + vqmmc-supply = <&mmc1_fixed_io>; > + mmc-pwrseq = <&wifi_pwrseq>; > + bus-width = <4>; > + max-frequency = <200000000>; > + drv-type = <2>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + keep-power-in-suspend; > + enable-sdio-wakeup; > + cap-sdio-irq; > + non-removable; > + no-mmc; > + no-sd; > + assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC30_1>; > + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + qca_wifi: qca-wifi@1 { > + compatible = "qcom,ath10k"; > + reg = <1>; > + }; > +}; > + > +&mt6358_vdram2_reg { > + regulator-always-on; > +}; > + > +&mt6358codec { > + Avdd-supply = <&mt6358_vaud28_reg>; > +}; > + > +&mt6358_vsim1_reg { > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <2700000>; > +}; > + > +&mt6358_vsim2_reg { > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <2700000>; > +}; > + > +&pio { > + bt_pins: bt-pins { > + pins_bt_en { > + pinmux = <PINMUX_GPIO120__FUNC_GPIO120>; > + output-low; > + }; > + }; > + > + ec_ap_int_odl: ec_ap_int_odl { > + pins1 { > + pinmux = <PINMUX_GPIO151__FUNC_GPIO151>; > + input-enable; > + bias-pull-up; > + }; > + }; > + > + h1_int_od_l: h1_int_od_l { > + pins1 { > + pinmux = <PINMUX_GPIO153__FUNC_GPIO153>; > + input-enable; > + }; > + }; > + > + i2c0_pins: i2c0 { > + pins_bus { > + pinmux = <PINMUX_GPIO82__FUNC_SDA0>, > + <PINMUX_GPIO83__FUNC_SCL0>; > + mediatek,pull-up-adv = <3>; > + mediatek,drive-strength-adv = <00>; > + }; > + }; > + > + i2c1_pins: i2c1 { > + pins_bus { > + pinmux = <PINMUX_GPIO81__FUNC_SDA1>, > + <PINMUX_GPIO84__FUNC_SCL1>; > + mediatek,pull-up-adv = <3>; > + mediatek,drive-strength-adv = <00>; > + }; > + }; > + > + i2c2_pins: i2c2 { > + pins_bus { > + pinmux = <PINMUX_GPIO103__FUNC_SCL2>, > + <PINMUX_GPIO104__FUNC_SDA2>; > + bias-disable; > + mediatek,drive-strength-adv = <00>; > + }; > + }; > + > + i2c3_pins: i2c3 { > + pins_bus { > + pinmux = <PINMUX_GPIO50__FUNC_SCL3>, > + <PINMUX_GPIO51__FUNC_SDA3>; > + mediatek,pull-up-adv = <3>; > + mediatek,drive-strength-adv = <00>; > + }; > + }; > + > + i2c4_pins: i2c4 { > + pins_bus { > + pinmux = <PINMUX_GPIO105__FUNC_SCL4>, > + <PINMUX_GPIO106__FUNC_SDA4>; > + bias-disable; > + mediatek,drive-strength-adv = <00>; > + }; > + }; > + > + i2c5_pins: i2c5 { > + pins_bus { > + pinmux = <PINMUX_GPIO48__FUNC_SCL5>, > + <PINMUX_GPIO49__FUNC_SDA5>; > + mediatek,pull-up-adv = <3>; > + mediatek,drive-strength-adv = <00>; > + }; > + }; > + > + i2c6_pins: i2c6 { > + pins_bus { > + pinmux = <PINMUX_GPIO11__FUNC_SCL6>, > + <PINMUX_GPIO12__FUNC_SDA6>; > + bias-disable; > + }; > + }; > + > + mmc0_pins_default: mmc0-pins-default { > + pins_cmd_dat { > + pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, > + <PINMUX_GPIO128__FUNC_MSDC0_DAT1>, > + <PINMUX_GPIO125__FUNC_MSDC0_DAT2>, > + <PINMUX_GPIO132__FUNC_MSDC0_DAT3>, > + <PINMUX_GPIO126__FUNC_MSDC0_DAT4>, > + <PINMUX_GPIO129__FUNC_MSDC0_DAT5>, > + <PINMUX_GPIO127__FUNC_MSDC0_DAT6>, > + <PINMUX_GPIO130__FUNC_MSDC0_DAT7>, > + <PINMUX_GPIO122__FUNC_MSDC0_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_14mA>; > + mediatek,pull-up-adv = <01>; > + }; > + > + pins_clk { > + pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>; > + drive-strength = <MTK_DRIVE_14mA>; > + mediatek,pull-down-adv = <10>; > + }; > + > + pins_rst { > + pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>; > + drive-strength = <MTK_DRIVE_14mA>; > + mediatek,pull-down-adv = <01>; > + }; > + }; > + > + mmc0_pins_uhs: mmc0-pins-uhs { > + pins_cmd_dat { > + pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, > + <PINMUX_GPIO128__FUNC_MSDC0_DAT1>, > + <PINMUX_GPIO125__FUNC_MSDC0_DAT2>, > + <PINMUX_GPIO132__FUNC_MSDC0_DAT3>, > + <PINMUX_GPIO126__FUNC_MSDC0_DAT4>, > + <PINMUX_GPIO129__FUNC_MSDC0_DAT5>, > + <PINMUX_GPIO127__FUNC_MSDC0_DAT6>, > + <PINMUX_GPIO130__FUNC_MSDC0_DAT7>, > + <PINMUX_GPIO122__FUNC_MSDC0_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_14mA>; > + mediatek,pull-up-adv = <01>; > + }; > + > + pins_clk { > + pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>; > + drive-strength = <MTK_DRIVE_14mA>; > + mediatek,pull-down-adv = <10>; > + }; > + > + pins_ds { > + pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>; > + drive-strength = <MTK_DRIVE_14mA>; > + mediatek,pull-down-adv = <10>; > + }; > + > + pins_rst { > + pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>; > + drive-strength = <MTK_DRIVE_14mA>; > + mediatek,pull-up-adv = <01>; > + }; > + }; > + > + mmc1_pins_default: mmc1-pins-default { > + pins_cmd_dat { > + pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>, > + <PINMUX_GPIO32__FUNC_MSDC1_DAT0>, > + <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, > + <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, > + <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; > + input-enable; > + mediatek,pull-up-adv = <10>; > + }; > + > + pins_clk { > + pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; > + input-enable; > + mediatek,pull-down-adv = <10>; > + }; > + }; > + > + mmc1_pins_uhs: mmc1-pins-uhs { > + pins_cmd_dat { > + pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>, > + <PINMUX_GPIO32__FUNC_MSDC1_DAT0>, > + <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, > + <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, > + <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; > + drive-strength = <MTK_DRIVE_6mA>; > + input-enable; > + mediatek,pull-up-adv = <10>; > + }; > + > + pins_clk { > + pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + mediatek,pull-down-adv = <10>; > + input-enable; > + }; > + }; > + > + spi0_pins: spi0 { > + pins_spi{ > + pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>, > + <PINMUX_GPIO86__FUNC_GPIO86>, > + <PINMUX_GPIO87__FUNC_SPI0_MO>, > + <PINMUX_GPIO88__FUNC_SPI0_CLK>; > + bias-disable; > + }; > + }; > + > + spi1_pins: spi1 { > + pins_spi{ > + pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>, > + <PINMUX_GPIO162__FUNC_SPI1_A_CSB>, > + <PINMUX_GPIO163__FUNC_SPI1_A_MO>, > + <PINMUX_GPIO164__FUNC_SPI1_A_CLK>; > + bias-disable; > + }; > + }; > + > + spi2_pins: spi2 { > + pins_spi{ > + pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>, > + <PINMUX_GPIO1__FUNC_SPI2_MO>, > + <PINMUX_GPIO2__FUNC_SPI2_CLK>; > + bias-disable; > + }; > + pins_spi_mi { > + pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>; > + mediatek,pull-down-adv = <00>; > + }; > + }; > + > + spi3_pins: spi3 { > + pins_spi{ > + pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>, > + <PINMUX_GPIO22__FUNC_SPI3_CSB>, > + <PINMUX_GPIO23__FUNC_SPI3_MO>, > + <PINMUX_GPIO24__FUNC_SPI3_CLK>; > + bias-disable; > + }; > + }; > + > + spi4_pins: spi4 { > + pins_spi{ > + pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>, > + <PINMUX_GPIO18__FUNC_SPI4_CSB>, > + <PINMUX_GPIO19__FUNC_SPI4_MO>, > + <PINMUX_GPIO20__FUNC_SPI4_CLK>; > + bias-disable; > + }; > + }; > + > + spi5_pins: spi5 { > + pins_spi{ > + pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>, > + <PINMUX_GPIO14__FUNC_SPI5_CSB>, > + <PINMUX_GPIO15__FUNC_SPI5_MO>, > + <PINMUX_GPIO16__FUNC_SPI5_CLK>; > + bias-disable; > + }; > + }; > + > + uart0_pins_default: uart0-pins-default { > + pins_rx { > + pinmux = <PINMUX_GPIO95__FUNC_URXD0>; > + input-enable; > + bias-pull-up; > + }; > + pins_tx { > + pinmux = <PINMUX_GPIO96__FUNC_UTXD0>; > + }; > + }; > + > + uart1_pins_default: uart1-pins-default { > + pins_rx { > + pinmux = <PINMUX_GPIO121__FUNC_URXD1>; > + input-enable; > + bias-pull-up; > + }; > + pins_tx { > + pinmux = <PINMUX_GPIO115__FUNC_UTXD1>; > + }; > + pins_rts { > + pinmux = <PINMUX_GPIO47__FUNC_URTS1>; > + output-enable; > + }; > + pins_cts { > + pinmux = <PINMUX_GPIO46__FUNC_UCTS1>; > + input-enable; > + }; > + }; > + > + uart1_pins_sleep: uart1-pins-sleep { > + pins_rx { > + pinmux = <PINMUX_GPIO121__FUNC_GPIO121>; > + input-enable; > + bias-pull-up; > + }; > + pins_tx { > + pinmux = <PINMUX_GPIO115__FUNC_UTXD1>; > + }; > + pins_rts { > + pinmux = <PINMUX_GPIO47__FUNC_URTS1>; > + output-enable; > + }; > + pins_cts { > + pinmux = <PINMUX_GPIO46__FUNC_UCTS1>; > + input-enable; > + }; > + }; > + > + wifi_pins_pwrseq: wifi-pins-pwrseq { > + pins_wifi_enable { > + pinmux = <PINMUX_GPIO119__FUNC_GPIO119>; > + output-low; > + }; > + }; > + > + wifi_pins_wakeup: wifi-pins-wakeup { > + pins_wifi_wakeup { > + pinmux = <PINMUX_GPIO113__FUNC_GPIO113>; > + input-enable; > + }; > + }; > +}; > + > +&soc_data { > + status = "okay"; > +}; > + > +&spi0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi0_pins>; > + mediatek,pad-select = <0>; > + status = "okay"; > + cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>; > + > + cr50@0 { > + compatible = "google,cr50"; > + reg = <0>; > + spi-max-frequency = <1000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&h1_int_od_l>; > + interrupt-parent = <&pio>; > + interrupts = <153 IRQ_TYPE_EDGE_RISING>; > + }; > +}; > + > +&spi1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi1_pins>; > + mediatek,pad-select = <0>; > + status = "okay"; > + > + w25q64dw: spi-flash@0 { > + compatible = "winbond,w25q64dw", "jedec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <25000000>; > + }; > +}; > + > +&spi2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi2_pins>; > + mediatek,pad-select = <0>; > + status = "okay"; > + > + cros_ec: cros-ec@0 { > + compatible = "google,cros-ec-spi"; > + reg = <0>; > + spi-max-frequency = <3000000>; > + interrupt-parent = <&pio>; > + interrupts = <151 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ec_ap_int_odl>; > + > + i2c_tunnel: i2c-tunnel { > + compatible = "google,cros-ec-i2c-tunnel"; > + google,remote-bus = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + usbc_extcon: extcon0 { > + compatible = "google,extcon-usbc-cros-ec"; > + google,usb-port-id = <0>; > + }; > + }; > +}; > + > +&spi3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi3_pins>; > + mediatek,pad-select = <0>; > + status = "disabled"; > +}; > + > +&spi4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi4_pins>; > + mediatek,pad-select = <0>; > + status = "disabled"; > +}; > + > +&spi5 { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi5_pins>; > + mediatek,pad-select = <0>; > + status = "disabled"; > +}; > + > +&ssusb { > + dr_mode = "host"; > + wakeup-source; > + vusb33-supply = <&mt6358_vusb_reg>; > + status = "okay"; > +}; > + > +&u3phy { > + status = "okay"; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins_default>; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&uart1_pins_default>; > + pinctrl-1 = <&uart1_pins_sleep>; > + status = "okay"; > + interrupts-extended = <&sysirq GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>, > + <&pio 121 IRQ_TYPE_EDGE_FALLING>; > + > + bluetooth: bluetooth { > + pinctrl-names = "default"; > + pinctrl-0 = <&bt_pins>; > + status = "okay"; > + compatible = "qcom,qca6174-bt"; > + enable-gpios = <&pio 120 0>; > + clocks = <&clk32k>; > + firmware-name = "nvm_00440302_i2s.bin"; > + }; > +}; > + > +&usb_host { > + #address-cells = <1>; > + #size-cells = <0>; > + vusb33-supply = <&mt6358_vusb_reg>; > + status = "okay"; > + > + hub@1 { > + compatible = "usb5e3,610"; > + reg = <1>; > + }; > +}; > + > +#include <arm/cros-ec-keyboard.dtsi> > +#include <arm/cros-ec-sbs.dtsi> > -- > 2.27.0 >
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 848218f55bc1d..708fc60fa589a 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -12,4 +12,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts new file mode 100644 index 0000000000000..47113e275cb52 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2019 Google LLC + * + * Device-tree for Krane sku176. + * + * SKU is a 8-bit value (0xb0 == 176): + * - Bits 7..4: Panel ID: 0xb (BOE) + * - Bits 3..0: SKU ID: 0x0 (default) + */ + +/dts-v1/; +#include "mt8183-kukui-krane.dtsi" + +/ { + model = "MediaTek krane sku176 board"; + compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi new file mode 100644 index 0000000000000..fbc471ccf805f --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2019 Google LLC + */ + +#include "mt8183-kukui.dtsi" + +/ { + ppvarn_lcd: ppvarn-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarn_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarn_lcd_en>; + + enable-active-high; + + gpio = <&pio 66 GPIO_ACTIVE_HIGH>; + }; + + ppvarp_lcd: ppvarp-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarp_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarp_lcd_en>; + + enable-active-high; + + gpio = <&pio 166 GPIO_ACTIVE_HIGH>; + }; + + pp1800_lcd: pp1800-lcd { + compatible = "regulator-fixed"; + regulator-name = "pp1800_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_lcd_en>; + + enable-active-high; + + gpio = <&pio 36 GPIO_ACTIVE_HIGH>; + }; +}; + +&bluetooth { + firmware-name = "nvm_00440302_i2s_eu.bin"; +}; + +&i2c0 { + status = "okay"; + + touchscreen4: touchscreen@5d { + compatible = "hid-over-i2c"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupt-parent = <&pio>; + interrupts = <155 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + }; +}; + +&mt6358_vcama2_reg { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@58 { + compatible = "atmel,24c32"; + reg = <0x58>; + pagesize = <32>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@54 { + compatible = "atmel,24c32"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&pio { + /* 192 lines */ + gpio-line-names = + "SPI_AP_EC_CS_L", + "SPI_AP_EC_MOSI", + "SPI_AP_EC_CLK", + "I2S3_DO", + "USB_PD_INT_ODL", + "", + "", + "", + "", + "IT6505_HPD_L", + "I2S3_TDM_D3", + "SOC_I2C6_1V8_SCL", + "SOC_I2C6_1V8_SDA", + "DPI_D0", + "DPI_D1", + "DPI_D2", + "DPI_D3", + "DPI_D4", + "DPI_D5", + "DPI_D6", + "DPI_D7", + "DPI_D8", + "DPI_D9", + "DPI_D10", + "DPI_D11", + "DPI_HSYNC", + "DPI_VSYNC", + "DPI_DE", + "DPI_CK", + "AP_MSDC1_CLK", + "AP_MSDC1_DAT3", + "AP_MSDC1_CMD", + "AP_MSDC1_DAT0", + "AP_MSDC1_DAT2", + "AP_MSDC1_DAT1", + "", + "", + "", + "", + "", + "", + "OTG_EN", + "DRVBUS", + "DISP_PWM", + "DSI_TE", + "LCM_RST_1V8", + "AP_CTS_WIFI_RTS", + "AP_RTS_WIFI_CTS", + "SOC_I2C5_1V8_SCL", + "SOC_I2C5_1V8_SDA", + "SOC_I2C3_1V8_SCL", + "SOC_I2C3_1V8_SDA", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SOC_I2C1_1V8_SDA", + "SOC_I2C0_1V8_SDA", + "SOC_I2C0_1V8_SCL", + "SOC_I2C1_1V8_SCL", + "AP_SPI_H1_MISO", + "AP_SPI_H1_CS_L", + "AP_SPI_H1_MOSI", + "AP_SPI_H1_CLK", + "I2S5_BCK", + "I2S5_LRCK", + "I2S5_DO", + "BOOTBLOCK_EN_L", + "MT8183_KPCOL0", + "SPI_AP_EC_MISO", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "I2S2_MCK", + "I2S2_BCK", + "CLK_5M_WCAM", + "CLK_2M_UCAM", + "I2S2_LRCK", + "I2S2_DI", + "SOC_I2C2_1V8_SCL", + "SOC_I2C2_1V8_SDA", + "SOC_I2C4_1V8_SCL", + "SOC_I2C4_1V8_SDA", + "", + "SCL8", + "SDA8", + "FCAM_PWDN_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "", + "", + "", + "", + "", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "EC_AP_INT_ODL", + "IT6505_INT_ODL", + "H1_INT_OD_L", + "", + "", + "", + "", + "", + "", + "", + "AP_SPI_FLASH_MISO", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_CLK", + "DA7219_IRQ", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; + + ppvarp_lcd_en: ppvarp-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO66__FUNC_GPIO66>; + output-low; + }; + }; + + ppvarn_lcd_en: ppvarn-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>; + output-low; + }; + }; + + pp1800_lcd_en: pp1800-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO36__FUNC_GPIO36>; + output-low; + }; + }; + + open_touch: open_touch { + irq_pin { + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>; + input-enable; + bias-pull-up; + }; + + rst_pin { + pinmux = <PINMUX_GPIO156__FUNC_GPIO156>; + + /* + * The pen driver doesn't currently support driving + * this reset line. By specifying output-high here + * we're relying on the fact that this pin has a default + * pulldown at boot (which makes sure the pen was in + * reset if it was powered) and then we set it high here + * to take it out of reset. Better would be if the pen + * driver could control this and we could remove + * "output-high" here. + */ + output-high; + }; + }; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "LE_Krane"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi new file mode 100644 index 0000000000000..f0a070535b340 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -0,0 +1,788 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Ben Ho <ben.ho@mediatek.com> + * Erin Lo <erin.lo@mediatek.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "mt8183.dtsi" +#include "mt6358.dtsi" + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + clk32k: oscillator1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + it6505_pp18_reg: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "it6505_pp18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 178 0>; + enable-active-high; + }; + + lcd_pp3300: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "lcd_pp3300"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + bl_pp5000: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "bl_pp5000"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + mmc1_fixed_power: regulator3 { + compatible = "regulator-fixed"; + regulator-name = "mmc1_power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + mmc1_fixed_io: regulator4 { + compatible = "regulator-fixed"; + regulator-name = "mmc1_io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pp1800_alw: regulator5 { + compatible = "regulator-fixed"; + regulator-name = "pp1800_alw"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pp3300_alw: regulator6 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_alw"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max98357a: codec0 { + compatible = "maxim,max98357a"; + sdmode-gpios = <&pio 175 0>; + }; + + btsco: codec1 { + compatible = "linux,bt-sco"; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pins_pwrseq>; + + /* Toggle WIFI_ENABLE to reset the chip. */ + reset-gpios = <&pio 119 1>; + }; + + wifi_wakeup: wifi-wakeup { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pins_wakeup>; + + wowlan { + label = "Wake on WiFi"; + gpios = <&pio 113 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + tboard_thermistor1: thermal-sensor1 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 0>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-5000) 4241 + 0 4063 + 5000 3856 + 10000 3621 + 15000 3364 + 20000 3091 + 25000 2810 + 30000 2526 + 35000 2247 + 40000 1982 + 45000 1734 + 50000 1507 + 55000 1305 + 60000 1122 + 65000 964 + 70000 827 + 75000 710 + 80000 606 + 85000 519 + 90000 445 + 95000 382 + 100000 330 + 105000 284 + 110000 245 + 115000 213 + 120000 183 + 125000 161>; + }; + + tboard_thermistor2: thermal-sensor2 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 1>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-5000) 4241 + 0 4063 + 5000 3856 + 10000 3621 + 15000 3364 + 20000 3091 + 25000 2810 + 30000 2526 + 35000 2247 + 40000 1982 + 45000 1734 + 50000 1507 + 55000 1305 + 60000 1122 + 65000 964 + 70000 827 + 75000 710 + 80000 606 + 85000 519 + 90000 445 + 95000 382 + 100000 330 + 105000 284 + 110000 245 + 115000 213 + 120000 183 + 125000 161>; + }; +}; + +&auxadc { + status = "okay"; +}; + +&cpu0 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu1 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu2 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu3 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu4 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu5 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu6 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu7 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x12814>; + vmmc-supply = <&mt6358_vemc_reg>; + vqmmc-supply = <&mt6358_vio18_reg>; + assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>; + non-removable; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + vmmc-supply = <&mmc1_fixed_power>; + vqmmc-supply = <&mmc1_fixed_io>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + max-frequency = <200000000>; + drv-type = <2>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + keep-power-in-suspend; + enable-sdio-wakeup; + cap-sdio-irq; + non-removable; + no-mmc; + no-sd; + assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC30_1>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + #address-cells = <1>; + #size-cells = <0>; + + qca_wifi: qca-wifi@1 { + compatible = "qcom,ath10k"; + reg = <1>; + }; +}; + +&mt6358_vdram2_reg { + regulator-always-on; +}; + +&mt6358codec { + Avdd-supply = <&mt6358_vaud28_reg>; +}; + +&mt6358_vsim1_reg { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&mt6358_vsim2_reg { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&pio { + bt_pins: bt-pins { + pins_bt_en { + pinmux = <PINMUX_GPIO120__FUNC_GPIO120>; + output-low; + }; + }; + + ec_ap_int_odl: ec_ap_int_odl { + pins1 { + pinmux = <PINMUX_GPIO151__FUNC_GPIO151>; + input-enable; + bias-pull-up; + }; + }; + + h1_int_od_l: h1_int_od_l { + pins1 { + pinmux = <PINMUX_GPIO153__FUNC_GPIO153>; + input-enable; + }; + }; + + i2c0_pins: i2c0 { + pins_bus { + pinmux = <PINMUX_GPIO82__FUNC_SDA0>, + <PINMUX_GPIO83__FUNC_SCL0>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c1_pins: i2c1 { + pins_bus { + pinmux = <PINMUX_GPIO81__FUNC_SDA1>, + <PINMUX_GPIO84__FUNC_SCL1>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c2_pins: i2c2 { + pins_bus { + pinmux = <PINMUX_GPIO103__FUNC_SCL2>, + <PINMUX_GPIO104__FUNC_SDA2>; + bias-disable; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c3_pins: i2c3 { + pins_bus { + pinmux = <PINMUX_GPIO50__FUNC_SCL3>, + <PINMUX_GPIO51__FUNC_SDA3>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c4_pins: i2c4 { + pins_bus { + pinmux = <PINMUX_GPIO105__FUNC_SCL4>, + <PINMUX_GPIO106__FUNC_SDA4>; + bias-disable; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c5_pins: i2c5 { + pins_bus { + pinmux = <PINMUX_GPIO48__FUNC_SCL5>, + <PINMUX_GPIO49__FUNC_SDA5>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c6_pins: i2c6 { + pins_bus { + pinmux = <PINMUX_GPIO11__FUNC_SCL6>, + <PINMUX_GPIO12__FUNC_SDA6>; + bias-disable; + }; + }; + + mmc0_pins_default: mmc0-pins-default { + pins_cmd_dat { + pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO128__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO132__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO126__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO129__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO127__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO130__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO122__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-up-adv = <01>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <10>; + }; + + pins_rst { + pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <01>; + }; + }; + + mmc0_pins_uhs: mmc0-pins-uhs { + pins_cmd_dat { + pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO128__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO132__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO126__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO129__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO127__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO130__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO122__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-up-adv = <01>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <10>; + }; + + pins_ds { + pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <10>; + }; + + pins_rst { + pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-up-adv = <01>; + }; + }; + + mmc1_pins_default: mmc1-pins-default { + pins_cmd_dat { + pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>, + <PINMUX_GPIO32__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; + input-enable; + mediatek,pull-up-adv = <10>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; + input-enable; + mediatek,pull-down-adv = <10>; + }; + }; + + mmc1_pins_uhs: mmc1-pins-uhs { + pins_cmd_dat { + pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>, + <PINMUX_GPIO32__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; + drive-strength = <MTK_DRIVE_6mA>; + input-enable; + mediatek,pull-up-adv = <10>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + mediatek,pull-down-adv = <10>; + input-enable; + }; + }; + + spi0_pins: spi0 { + pins_spi{ + pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>, + <PINMUX_GPIO86__FUNC_GPIO86>, + <PINMUX_GPIO87__FUNC_SPI0_MO>, + <PINMUX_GPIO88__FUNC_SPI0_CLK>; + bias-disable; + }; + }; + + spi1_pins: spi1 { + pins_spi{ + pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>, + <PINMUX_GPIO162__FUNC_SPI1_A_CSB>, + <PINMUX_GPIO163__FUNC_SPI1_A_MO>, + <PINMUX_GPIO164__FUNC_SPI1_A_CLK>; + bias-disable; + }; + }; + + spi2_pins: spi2 { + pins_spi{ + pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>, + <PINMUX_GPIO1__FUNC_SPI2_MO>, + <PINMUX_GPIO2__FUNC_SPI2_CLK>; + bias-disable; + }; + pins_spi_mi { + pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>; + mediatek,pull-down-adv = <00>; + }; + }; + + spi3_pins: spi3 { + pins_spi{ + pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>, + <PINMUX_GPIO22__FUNC_SPI3_CSB>, + <PINMUX_GPIO23__FUNC_SPI3_MO>, + <PINMUX_GPIO24__FUNC_SPI3_CLK>; + bias-disable; + }; + }; + + spi4_pins: spi4 { + pins_spi{ + pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>, + <PINMUX_GPIO18__FUNC_SPI4_CSB>, + <PINMUX_GPIO19__FUNC_SPI4_MO>, + <PINMUX_GPIO20__FUNC_SPI4_CLK>; + bias-disable; + }; + }; + + spi5_pins: spi5 { + pins_spi{ + pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>, + <PINMUX_GPIO14__FUNC_SPI5_CSB>, + <PINMUX_GPIO15__FUNC_SPI5_MO>, + <PINMUX_GPIO16__FUNC_SPI5_CLK>; + bias-disable; + }; + }; + + uart0_pins_default: uart0-pins-default { + pins_rx { + pinmux = <PINMUX_GPIO95__FUNC_URXD0>; + input-enable; + bias-pull-up; + }; + pins_tx { + pinmux = <PINMUX_GPIO96__FUNC_UTXD0>; + }; + }; + + uart1_pins_default: uart1-pins-default { + pins_rx { + pinmux = <PINMUX_GPIO121__FUNC_URXD1>; + input-enable; + bias-pull-up; + }; + pins_tx { + pinmux = <PINMUX_GPIO115__FUNC_UTXD1>; + }; + pins_rts { + pinmux = <PINMUX_GPIO47__FUNC_URTS1>; + output-enable; + }; + pins_cts { + pinmux = <PINMUX_GPIO46__FUNC_UCTS1>; + input-enable; + }; + }; + + uart1_pins_sleep: uart1-pins-sleep { + pins_rx { + pinmux = <PINMUX_GPIO121__FUNC_GPIO121>; + input-enable; + bias-pull-up; + }; + pins_tx { + pinmux = <PINMUX_GPIO115__FUNC_UTXD1>; + }; + pins_rts { + pinmux = <PINMUX_GPIO47__FUNC_URTS1>; + output-enable; + }; + pins_cts { + pinmux = <PINMUX_GPIO46__FUNC_UCTS1>; + input-enable; + }; + }; + + wifi_pins_pwrseq: wifi-pins-pwrseq { + pins_wifi_enable { + pinmux = <PINMUX_GPIO119__FUNC_GPIO119>; + output-low; + }; + }; + + wifi_pins_wakeup: wifi-pins-wakeup { + pins_wifi_wakeup { + pinmux = <PINMUX_GPIO113__FUNC_GPIO113>; + input-enable; + }; + }; +}; + +&soc_data { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + mediatek,pad-select = <0>; + status = "okay"; + cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + spi-max-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + interrupt-parent = <&pio>; + interrupts = <153 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + mediatek,pad-select = <0>; + status = "okay"; + + w25q64dw: spi-flash@0 { + compatible = "winbond,w25q64dw", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + }; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins>; + mediatek,pad-select = <0>; + status = "okay"; + + cros_ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + spi-max-frequency = <3000000>; + interrupt-parent = <&pio>; + interrupts = <151 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_ap_int_odl>; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usbc_extcon: extcon0 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <0>; + }; + }; +}; + +&spi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + mediatek,pad-select = <0>; + status = "disabled"; +}; + +&spi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + mediatek,pad-select = <0>; + status = "disabled"; +}; + +&spi5 { + pinctrl-names = "default"; + pinctrl-0 = <&spi5_pins>; + mediatek,pad-select = <0>; + status = "disabled"; +}; + +&ssusb { + dr_mode = "host"; + wakeup-source; + vusb33-supply = <&mt6358_vusb_reg>; + status = "okay"; +}; + +&u3phy { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_default>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_pins_default>; + pinctrl-1 = <&uart1_pins_sleep>; + status = "okay"; + interrupts-extended = <&sysirq GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>, + <&pio 121 IRQ_TYPE_EDGE_FALLING>; + + bluetooth: bluetooth { + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + status = "okay"; + compatible = "qcom,qca6174-bt"; + enable-gpios = <&pio 120 0>; + clocks = <&clk32k>; + firmware-name = "nvm_00440302_i2s.bin"; + }; +}; + +&usb_host { + #address-cells = <1>; + #size-cells = <0>; + vusb33-supply = <&mt6358_vusb_reg>; + status = "okay"; + + hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + }; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi>