| Message ID | 20200706143443.9855-1-mkl@pengutronix.de (mailing list archive) |
|---|---|
| Headers | show |
| Series | spi: spi-sun6i: One fix and some improvements | expand |
On Mon, 6 Jul 2020 16:34:33 +0200, Marc Kleine-Budde wrote: > this series first fixes the calculation of the clock rate. The driver will > round up to the nearest clock rate instead of rounding down. Resulting in SPI > devices accessed with a too high SPI clock. > > The remaining patches improve the performance of the driver. The changes range > from micro-optimizations like reducing MMIO writes to the controller to > reducing the number of needed interrupts in some use cases. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [1/1] spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate commit: ed7815db70d17b1741883f2da8e1d80bc2efe517 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
On Mon, 6 Jul 2020 16:34:33 +0200, Marc Kleine-Budde wrote: > this series first fixes the calculation of the clock rate. The driver will > round up to the nearest clock rate instead of rounding down. Resulting in SPI > devices accessed with a too high SPI clock. > > The remaining patches improve the performance of the driver. The changes range > from micro-optimizations like reducing MMIO writes to the controller to > reducing the number of needed interrupts in some use cases. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [01/10] spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate commit: ed7815db70d17b1741883f2da8e1d80bc2efe517 [02/10] spi: spi-sun6i: sun6i_spi_transfer_one(): report effectivly used speed_hz of transfer (no commit info) [03/10] spi: spi-sun6i: sun6i_spi_transfer_one(): remove useless goto (no commit info) [04/10] spi: spi-sun6i: sun6i_spi_transfer_one(): remove not needed masking of transfer length (no commit info) [05/10] spi: spi-sun6i: sun6i_spi_get_tx_fifo_count: Convert manual shift+mask to FIELD_GET() (no commit info) [06/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it (no commit info) [07/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): remove not needed length argument (no commit info) [08/10] spi: spi-sun6i: sun6i_spi_fill_fifo(): remove not needed length argument (no commit info) [09/10] spi: spi-sun6i: sun6i_spi_transfer_one(): collate write to Interrupt Control Register (no commit info) [10/10] spi: spi-sun6i: sun6i_spi_transfer_one(): enable RF_RDY interrupt only if needed (no commit info) All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
On Mon, 6 Jul 2020 16:34:33 +0200, Marc Kleine-Budde wrote: > this series first fixes the calculation of the clock rate. The driver will > round up to the nearest clock rate instead of rounding down. Resulting in SPI > devices accessed with a too high SPI clock. > > The remaining patches improve the performance of the driver. The changes range > from micro-optimizations like reducing MMIO writes to the controller to > reducing the number of needed interrupts in some use cases. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [01/10] spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate commit: ed7815db70d17b1741883f2da8e1d80bc2efe517 [02/10] spi: spi-sun6i: sun6i_spi_transfer_one(): report effectivly used speed_hz of transfer commit: 09a7139e9e172e70cd980c45e01a49e3c2630864 [03/10] spi: spi-sun6i: sun6i_spi_transfer_one(): remove useless goto commit: 642d75131c8cab1f355f513bd19e90960720b839 [04/10] spi: spi-sun6i: sun6i_spi_transfer_one(): remove not needed masking of transfer length commit: 05bf34283c8e1c44bcae9bdb9c07df6769cdc995 [05/10] spi: spi-sun6i: sun6i_spi_get_tx_fifo_count: Convert manual shift+mask to FIELD_GET() commit: e0430d9040983ab05f59136f4291ae04e01e1e30 [06/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it commit: 9bfc242a93792b298b95003c691f46b838de0482 [07/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): remove not needed length argument commit: 60b1f09675f2330c84055cb11389c6212fe53cec [08/10] spi: spi-sun6i: sun6i_spi_fill_fifo(): remove not needed length argument commit: 15254b028dd6cf67e06dbc963fbd0c1cae33e35a [09/10] spi: spi-sun6i: sun6i_spi_transfer_one(): collate write to Interrupt Control Register commit: 1e9ca016b623a3560831df811bc1eaa29b30359c [10/10] spi: spi-sun6i: sun6i_spi_transfer_one(): enable RF_RDY interrupt only if needed commit: 878d4d57a6e5d3feae1f8a247ca04d3bfbc553cc All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
On Mon, 6 Jul 2020 16:34:33 +0200, Marc Kleine-Budde wrote: > this series first fixes the calculation of the clock rate. The driver will > round up to the nearest clock rate instead of rounding down. Resulting in SPI > devices accessed with a too high SPI clock. > > The remaining patches improve the performance of the driver. The changes range > from micro-optimizations like reducing MMIO writes to the controller to > reducing the number of needed interrupts in some use cases. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [01/10] spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate commit: ed7815db70d17b1741883f2da8e1d80bc2efe517 [02/10] spi: spi-sun6i: sun6i_spi_transfer_one(): report effectivly used speed_hz of transfer commit: 09a7139e9e172e70cd980c45e01a49e3c2630864 [03/10] spi: spi-sun6i: sun6i_spi_transfer_one(): remove useless goto commit: 642d75131c8cab1f355f513bd19e90960720b839 [04/10] spi: spi-sun6i: sun6i_spi_transfer_one(): remove not needed masking of transfer length commit: 05bf34283c8e1c44bcae9bdb9c07df6769cdc995 [05/10] spi: spi-sun6i: sun6i_spi_get_tx_fifo_count: Convert manual shift+mask to FIELD_GET() commit: e0430d9040983ab05f59136f4291ae04e01e1e30 [06/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it commit: 9bfc242a93792b298b95003c691f46b838de0482 [07/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): remove not needed length argument commit: 60b1f09675f2330c84055cb11389c6212fe53cec [08/10] spi: spi-sun6i: sun6i_spi_fill_fifo(): remove not needed length argument commit: 15254b028dd6cf67e06dbc963fbd0c1cae33e35a [09/10] spi: spi-sun6i: sun6i_spi_transfer_one(): collate write to Interrupt Control Register commit: 1e9ca016b623a3560831df811bc1eaa29b30359c [10/10] spi: spi-sun6i: sun6i_spi_transfer_one(): enable RF_RDY interrupt only if needed commit: 878d4d57a6e5d3feae1f8a247ca04d3bfbc553cc All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark