| Message ID | 1594138447-21488-1-git-send-email-richard.gong@linux.intel.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | fpga: stratix10-soc: make FPGA task un-interruptible | expand |
Hi On 7/7/20 11:14 AM, richard.gong@linux.intel.com wrote: > From: Richard Gong <richard.gong@intel.com> > > When CTRL+C occurs during the process of FPGA reconfiguration, the FPGA > reconfiguration process stops and the user can't perform a new FPGA > reconfiguration properly. > > Set FPGA complete task to be not interruptible so that the user can > properly perform FPGA reconfiguration after CTRL+C event. > > Signed-off-by: Richard Gong <richard.gong@intel.com> > --- > drivers/fpga/stratix10-soc.c | 23 +++-------------------- > 1 file changed, 3 insertions(+), 20 deletions(-) > > diff --git a/drivers/fpga/stratix10-soc.c b/drivers/fpga/stratix10-soc.c > index 44b7c56..657a70c 100644 > --- a/drivers/fpga/stratix10-soc.c > +++ b/drivers/fpga/stratix10-soc.c > @@ -196,17 +196,13 @@ static int s10_ops_write_init(struct fpga_manager *mgr, > if (ret < 0) > goto init_done; > > - ret = wait_for_completion_interruptible_timeout( > + ret = wait_for_completion_timeout( > &priv->status_return_completion, S10_RECONFIG_TIMEOUT); > if (!ret) { > dev_err(dev, "timeout waiting for RECONFIG_REQUEST\n"); > ret = -ETIMEDOUT; > goto init_done; > } > - if (ret < 0) { > - dev_err(dev, "error (%d) waiting for RECONFIG_REQUEST\n", ret); > - goto init_done; > - } > > ret = 0; > if (!test_and_clear_bit(SVC_STATUS_OK, &priv->status)) { > @@ -318,7 +314,7 @@ static int s10_ops_write(struct fpga_manager *mgr, const char *buf, > */ > wait_status = 1; /* not timed out */ > if (!priv->status) > - wait_status = wait_for_completion_interruptible_timeout( > + wait_status = wait_for_completion_timeout( > &priv->status_return_completion, > S10_BUFFER_TIMEOUT); > > @@ -340,13 +336,6 @@ static int s10_ops_write(struct fpga_manager *mgr, const char *buf, > ret = -ETIMEDOUT; > break; > } > - if (wait_status < 0) { > - ret = wait_status; > - dev_err(dev, > - "error (%d) waiting for svc layer buffers\n", > - ret); > - break; > - } > } > > if (!s10_free_buffers(mgr)) > @@ -372,7 +361,7 @@ static int s10_ops_write_complete(struct fpga_manager *mgr, > if (ret < 0) > break; > > - ret = wait_for_completion_interruptible_timeout( > + ret = wait_for_completion_timeout( > &priv->status_return_completion, timeout); > if (!ret) { > dev_err(dev, > @@ -380,12 +369,6 @@ static int s10_ops_write_complete(struct fpga_manager *mgr, > ret = -ETIMEDOUT; > break; > } > - if (ret < 0) { > - dev_err(dev, > - "error (%d) waiting for RECONFIG_COMPLETED\n", > - ret); > - break; > - } > /* Not error or timeout, so ret is # of jiffies until timeout */ > timeout = ret; > ret = 0; > Do you need the same change in drivers/fpga/socfpga.c? Also, you did not include Moritz Fisher on this. He's the maintainer. Dinh
Hi Dinh, On 7/8/20 12:08 PM, Dinh Nguyen wrote: > Hi > > On 7/7/20 11:14 AM, richard.gong@linux.intel.com wrote: >> From: Richard Gong <richard.gong@intel.com> >> >> When CTRL+C occurs during the process of FPGA reconfiguration, the FPGA >> reconfiguration process stops and the user can't perform a new FPGA >> reconfiguration properly. >> >> Set FPGA complete task to be not interruptible so that the user can >> properly perform FPGA reconfiguration after CTRL+C event. >> >> Signed-off-by: Richard Gong <richard.gong@intel.com> >> --- >> drivers/fpga/stratix10-soc.c | 23 +++-------------------- >> 1 file changed, 3 insertions(+), 20 deletions(-) >> >> diff --git a/drivers/fpga/stratix10-soc.c b/drivers/fpga/stratix10-soc.c >> index 44b7c56..657a70c 100644 >> --- a/drivers/fpga/stratix10-soc.c >> +++ b/drivers/fpga/stratix10-soc.c >> @@ -196,17 +196,13 @@ static int s10_ops_write_init(struct fpga_manager *mgr, >> if (ret < 0) >> goto init_done; >> >> - ret = wait_for_completion_interruptible_timeout( >> + ret = wait_for_completion_timeout( >> &priv->status_return_completion, S10_RECONFIG_TIMEOUT); >> if (!ret) { >> dev_err(dev, "timeout waiting for RECONFIG_REQUEST\n"); >> ret = -ETIMEDOUT; >> goto init_done; >> } >> - if (ret < 0) { >> - dev_err(dev, "error (%d) waiting for RECONFIG_REQUEST\n", ret); >> - goto init_done; >> - } >> >> ret = 0; >> if (!test_and_clear_bit(SVC_STATUS_OK, &priv->status)) { >> @@ -318,7 +314,7 @@ static int s10_ops_write(struct fpga_manager *mgr, const char *buf, >> */ >> wait_status = 1; /* not timed out */ >> if (!priv->status) >> - wait_status = wait_for_completion_interruptible_timeout( >> + wait_status = wait_for_completion_timeout( >> &priv->status_return_completion, >> S10_BUFFER_TIMEOUT); >> >> @@ -340,13 +336,6 @@ static int s10_ops_write(struct fpga_manager *mgr, const char *buf, >> ret = -ETIMEDOUT; >> break; >> } >> - if (wait_status < 0) { >> - ret = wait_status; >> - dev_err(dev, >> - "error (%d) waiting for svc layer buffers\n", >> - ret); >> - break; >> - } >> } >> >> if (!s10_free_buffers(mgr)) >> @@ -372,7 +361,7 @@ static int s10_ops_write_complete(struct fpga_manager *mgr, >> if (ret < 0) >> break; >> >> - ret = wait_for_completion_interruptible_timeout( >> + ret = wait_for_completion_timeout( >> &priv->status_return_completion, timeout); >> if (!ret) { >> dev_err(dev, >> @@ -380,12 +369,6 @@ static int s10_ops_write_complete(struct fpga_manager *mgr, >> ret = -ETIMEDOUT; >> break; >> } >> - if (ret < 0) { >> - dev_err(dev, >> - "error (%d) waiting for RECONFIG_COMPLETED\n", >> - ret); >> - break; >> - >> /* Not error or timeout, so ret is # of jiffies until timeout */ >> timeout = ret; >> ret = 0; >> > > Do you need the same change in drivers/fpga/socfpga.c? It is not required. Also, you did not > include Moritz Fisher on this. He's the maintainer. > I did include Moritz Fisher <mdf@kernel.org> in the submission, is something change recently? Regards, Richard > Dinh >
On 7/8/20 1:30 PM, Richard Gong wrote: > Hi Dinh, > > > On 7/8/20 12:08 PM, Dinh Nguyen wrote: >> Hi >> >> On 7/7/20 11:14 AM, richard.gong@linux.intel.com wrote: >>> From: Richard Gong <richard.gong@intel.com> >>> >>> When CTRL+C occurs during the process of FPGA reconfiguration, the FPGA >>> reconfiguration process stops and the user can't perform a new FPGA >>> reconfiguration properly. >>> >>> Set FPGA complete task to be not interruptible so that the user can >>> properly perform FPGA reconfiguration after CTRL+C event. >>> >>> Signed-off-by: Richard Gong <richard.gong@intel.com> >>> --- >>> drivers/fpga/stratix10-soc.c | 23 +++-------------------- >>> 1 file changed, 3 insertions(+), 20 deletions(-) >>> >>> diff --git a/drivers/fpga/stratix10-soc.c b/drivers/fpga/stratix10-soc.c >>> index 44b7c56..657a70c 100644 >>> --- a/drivers/fpga/stratix10-soc.c >>> +++ b/drivers/fpga/stratix10-soc.c >>> @@ -196,17 +196,13 @@ static int s10_ops_write_init(struct >>> fpga_manager *mgr, >>> if (ret < 0) >>> goto init_done; >>> - ret = wait_for_completion_interruptible_timeout( >>> + ret = wait_for_completion_timeout( >>> &priv->status_return_completion, S10_RECONFIG_TIMEOUT); >>> if (!ret) { >>> dev_err(dev, "timeout waiting for RECONFIG_REQUEST\n"); >>> ret = -ETIMEDOUT; >>> goto init_done; >>> } >>> - if (ret < 0) { >>> - dev_err(dev, "error (%d) waiting for RECONFIG_REQUEST\n", ret); >>> - goto init_done; >>> - } >>> ret = 0; >>> if (!test_and_clear_bit(SVC_STATUS_OK, &priv->status)) { >>> @@ -318,7 +314,7 @@ static int s10_ops_write(struct fpga_manager >>> *mgr, const char *buf, >>> */ >>> wait_status = 1; /* not timed out */ >>> if (!priv->status) >>> - wait_status = wait_for_completion_interruptible_timeout( >>> + wait_status = wait_for_completion_timeout( >>> &priv->status_return_completion, >>> S10_BUFFER_TIMEOUT); >>> @@ -340,13 +336,6 @@ static int s10_ops_write(struct fpga_manager >>> *mgr, const char *buf, >>> ret = -ETIMEDOUT; >>> break; >>> } >>> - if (wait_status < 0) { >>> - ret = wait_status; >>> - dev_err(dev, >>> - "error (%d) waiting for svc layer buffers\n", >>> - ret); >>> - break; >>> - } >>> } >>> if (!s10_free_buffers(mgr)) >>> @@ -372,7 +361,7 @@ static int s10_ops_write_complete(struct >>> fpga_manager *mgr, >>> if (ret < 0) >>> break; >>> - ret = wait_for_completion_interruptible_timeout( >>> + ret = wait_for_completion_timeout( >>> &priv->status_return_completion, timeout); >>> if (!ret) { >>> dev_err(dev, >>> @@ -380,12 +369,6 @@ static int s10_ops_write_complete(struct >>> fpga_manager *mgr, >>> ret = -ETIMEDOUT; >>> break; >>> } >>> - if (ret < 0) { >>> - dev_err(dev, >>> - "error (%d) waiting for RECONFIG_COMPLETED\n", >>> - ret); >>> - break; >>> - >>> /* Not error or timeout, so ret is # of jiffies until >>> timeout */ >>> timeout = ret; >>> ret = 0; >>> >> >> Do you need the same change in drivers/fpga/socfpga.c? > It is not required. Why not? > Also, you did not >> include Moritz Fisher on this. He's the maintainer. >> > I did include Moritz Fisher <mdf@kernel.org> in the submission, is > something change recently? > My bad, I didn't see his name in the email. Dinh
Hi Dinh, On 7/8/20 1:47 PM, Dinh Nguyen wrote: > > > On 7/8/20 1:30 PM, Richard Gong wrote: >> Hi Dinh, >> >> >> On 7/8/20 12:08 PM, Dinh Nguyen wrote: >>> Hi >>> >>> On 7/7/20 11:14 AM, richard.gong@linux.intel.com wrote: >>>> From: Richard Gong <richard.gong@intel.com> >>>> >>>> When CTRL+C occurs during the process of FPGA reconfiguration, the FPGA >>>> reconfiguration process stops and the user can't perform a new FPGA >>>> reconfiguration properly. >>>> >>>> Set FPGA complete task to be not interruptible so that the user can >>>> properly perform FPGA reconfiguration after CTRL+C event. >>>> >>>> Signed-off-by: Richard Gong <richard.gong@intel.com> >>>> --- >>>> drivers/fpga/stratix10-soc.c | 23 +++-------------------- >>>> 1 file changed, 3 insertions(+), 20 deletions(-) >>>> >>>> diff --git a/drivers/fpga/stratix10-soc.c b/drivers/fpga/stratix10-soc.c >>>> index 44b7c56..657a70c 100644 >>>> --- a/drivers/fpga/stratix10-soc.c >>>> +++ b/drivers/fpga/stratix10-soc.c >>>> @@ -196,17 +196,13 @@ static int s10_ops_write_init(struct >>>> fpga_manager *mgr, >>>> if (ret < 0) >>>> goto init_done; >>>> - ret = wait_for_completion_interruptible_timeout( >>>> + ret = wait_for_completion_timeout( >>>> &priv->status_return_completion, S10_RECONFIG_TIMEOUT); >>>> if (!ret) { >>>> dev_err(dev, "timeout waiting for RECONFIG_REQUEST\n"); >>>> ret = -ETIMEDOUT; >>>> goto init_done; >>>> } >>>> - if (ret < 0) { >>>> - dev_err(dev, "error (%d) waiting for RECONFIG_REQUEST\n", ret); >>>> - goto init_done; >>>> - } >>>> ret = 0; >>>> if (!test_and_clear_bit(SVC_STATUS_OK, &priv->status)) { >>>> @@ -318,7 +314,7 @@ static int s10_ops_write(struct fpga_manager >>>> *mgr, const char *buf, >>>> */ >>>> wait_status = 1; /* not timed out */ >>>> if (!priv->status) >>>> - wait_status = wait_for_completion_interruptible_timeout( >>>> + wait_status = wait_for_completion_timeout( >>>> &priv->status_return_completion, >>>> S10_BUFFER_TIMEOUT); >>>> @@ -340,13 +336,6 @@ static int s10_ops_write(struct fpga_manager >>>> *mgr, const char *buf, >>>> ret = -ETIMEDOUT; >>>> break; >>>> } >>>> - if (wait_status < 0) { >>>> - ret = wait_status; >>>> - dev_err(dev, >>>> - "error (%d) waiting for svc layer buffers\n", >>>> - ret); >>>> - break; >>>> - } >>>> } >>>> if (!s10_free_buffers(mgr)) >>>> @@ -372,7 +361,7 @@ static int s10_ops_write_complete(struct >>>> fpga_manager *mgr, >>>> if (ret < 0) >>>> break; >>>> - ret = wait_for_completion_interruptible_timeout( >>>> + ret = wait_for_completion_timeout( >>>> &priv->status_return_completion, timeout); >>>> if (!ret) { >>>> dev_err(dev, >>>> @@ -380,12 +369,6 @@ static int s10_ops_write_complete(struct >>>> fpga_manager *mgr, >>>> ret = -ETIMEDOUT; >>>> break; >>>> } >>>> - if (ret < 0) { >>>> - dev_err(dev, >>>> - "error (%d) waiting for RECONFIG_COMPLETED\n", >>>> - ret); >>>> - break; >>>> - >>>> /* Not error or timeout, so ret is # of jiffies until >>>> timeout */ >>>> timeout = ret; >>>> ret = 0; >>>> >>> >>> Do you need the same change in drivers/fpga/socfpga.c? >> It is not required. > > Why not? The original codes doesn't handle the task completion to be signaled, so here it serves the same function as wait_for_completion_timeout call. Regards, Richard > >> Also, you did not >>> include Moritz Fisher on this. He's the maintainer. >>> >> I did include Moritz Fisher <mdf@kernel.org> in the submission, is >> something change recently? >> > > My bad, I didn't see his name in the email. > > Dinh >
Mostly fine, see inline question. On 7/7/20 9:14 AM, richard.gong@linux.intel.com wrote: > From: Richard Gong <richard.gong@intel.com> > > When CTRL+C occurs during the process of FPGA reconfiguration, the FPGA > reconfiguration process stops and the user can't perform a new FPGA > reconfiguration properly. > > Set FPGA complete task to be not interruptible so that the user can > properly perform FPGA reconfiguration after CTRL+C event. > > Signed-off-by: Richard Gong <richard.gong@intel.com> > --- > drivers/fpga/stratix10-soc.c | 23 +++-------------------- > 1 file changed, 3 insertions(+), 20 deletions(-) > > diff --git a/drivers/fpga/stratix10-soc.c b/drivers/fpga/stratix10-soc.c > index 44b7c56..657a70c 100644 > --- a/drivers/fpga/stratix10-soc.c > +++ b/drivers/fpga/stratix10-soc.c > @@ -196,17 +196,13 @@ static int s10_ops_write_init(struct fpga_manager *mgr, > if (ret < 0) > goto init_done; > > - ret = wait_for_completion_interruptible_timeout( > + ret = wait_for_completion_timeout( > &priv->status_return_completion, S10_RECONFIG_TIMEOUT); > if (!ret) { > dev_err(dev, "timeout waiting for RECONFIG_REQUEST\n"); > ret = -ETIMEDOUT; > goto init_done; > } > - if (ret < 0) { > - dev_err(dev, "error (%d) waiting for RECONFIG_REQUEST\n", ret); > - goto init_done; > - } > > ret = 0; > if (!test_and_clear_bit(SVC_STATUS_OK, &priv->status)) { > @@ -318,7 +314,7 @@ static int s10_ops_write(struct fpga_manager *mgr, const char *buf, > */ > wait_status = 1; /* not timed out */ > if (!priv->status) > - wait_status = wait_for_completion_interruptible_timeout( > + wait_status = wait_for_completion_timeout( > &priv->status_return_completion, > S10_BUFFER_TIMEOUT); > > @@ -340,13 +336,6 @@ static int s10_ops_write(struct fpga_manager *mgr, const char *buf, > ret = -ETIMEDOUT; > break; > } > - if (wait_status < 0) { > - ret = wait_status; > - dev_err(dev, > - "error (%d) waiting for svc layer buffers\n", > - ret); > - break; > - } > } > > if (!s10_free_buffers(mgr)) > @@ -372,7 +361,7 @@ static int s10_ops_write_complete(struct fpga_manager *mgr, This part is done in an infinite loop, is the loop still needed ? Reviewed-by: Tom Rix <trix@redhat.com> > if (ret < 0) > break; > > - ret = wait_for_completion_interruptible_timeout( > + ret = wait_for_completion_timeout( > &priv->status_return_completion, timeout); > if (!ret) { > dev_err(dev, > @@ -380,12 +369,6 @@ static int s10_ops_write_complete(struct fpga_manager *mgr, > ret = -ETIMEDOUT; > break; > } > - if (ret < 0) { > - dev_err(dev, > - "error (%d) waiting for RECONFIG_COMPLETED\n", > - ret); > - break; > - } > /* Not error or timeout, so ret is # of jiffies until timeout */ > timeout = ret; > ret = 0;
Hi Tom, On 7/9/20 3:01 PM, Tom Rix wrote: > Mostly fine, see inline question. > > On 7/7/20 9:14 AM, richard.gong@linux.intel.com wrote: >> From: Richard Gong <richard.gong@intel.com> >> >> When CTRL+C occurs during the process of FPGA reconfiguration, the FPGA >> reconfiguration process stops and the user can't perform a new FPGA >> reconfiguration properly. >> >> Set FPGA complete task to be not interruptible so that the user can >> properly perform FPGA reconfiguration after CTRL+C event. >> >> Signed-off-by: Richard Gong <richard.gong@intel.com> >> --- >> drivers/fpga/stratix10-soc.c | 23 +++-------------------- >> 1 file changed, 3 insertions(+), 20 deletions(-) >> >> diff --git a/drivers/fpga/stratix10-soc.c b/drivers/fpga/stratix10-soc.c >> index 44b7c56..657a70c 100644 >> --- a/drivers/fpga/stratix10-soc.c >> +++ b/drivers/fpga/stratix10-soc.c >> @@ -196,17 +196,13 @@ static int s10_ops_write_init(struct fpga_manager *mgr, >> if (ret < 0) >> goto init_done; >> >> - ret = wait_for_completion_interruptible_timeout( >> + ret = wait_for_completion_timeout( >> &priv->status_return_completion, S10_RECONFIG_TIMEOUT); >> if (!ret) { >> dev_err(dev, "timeout waiting for RECONFIG_REQUEST\n"); >> ret = -ETIMEDOUT; >> goto init_done; >> } >> - if (ret < 0) { >> - dev_err(dev, "error (%d) waiting for RECONFIG_REQUEST\n", ret); >> - goto init_done; >> - } >> >> ret = 0; >> if (!test_and_clear_bit(SVC_STATUS_OK, &priv->status)) { >> @@ -318,7 +314,7 @@ static int s10_ops_write(struct fpga_manager *mgr, const char *buf, >> */ >> wait_status = 1; /* not timed out */ >> if (!priv->status) >> - wait_status = wait_for_completion_interruptible_timeout( >> + wait_status = wait_for_completion_timeout( >> &priv->status_return_completion, >> S10_BUFFER_TIMEOUT); >> >> @@ -340,13 +336,6 @@ static int s10_ops_write(struct fpga_manager *mgr, const char *buf, >> ret = -ETIMEDOUT; >> break; >> } >> - if (wait_status < 0) { >> - ret = wait_status; >> - dev_err(dev, >> - "error (%d) waiting for svc layer buffers\n", >> - ret); >> - break; >> - } >> } >> >> if (!s10_free_buffers(mgr)) >> @@ -372,7 +361,7 @@ static int s10_ops_write_complete(struct fpga_manager *mgr, > > This part is done in an infinite loop, is the loop still needed The loop is still need. FPGA manager driver need polling the completed status from the lower level firmware. The lower level firmware can return FPGA manager driver with busy, completed or error status. > > Reviewed-by: Tom Rix <trix@redhat.com> Thanks for your review! Regards, Richard > >> if (ret < 0) >> break; >> >> - ret = wait_for_completion_interruptible_timeout( >> + ret = wait_for_completion_timeout( >> &priv->status_return_completion, timeout); >> if (!ret) { >> dev_err(dev, >> @@ -380,12 +369,6 @@ static int s10_ops_write_complete(struct fpga_manager *mgr, >> ret = -ETIMEDOUT; >> break; >> } >> - if (ret < 0) { >> - dev_err(dev, >> - "error (%d) waiting for RECONFIG_COMPLETED\n", >> - ret); >> - break; >> - } >> /* Not error or timeout, so ret is # of jiffies until timeout */ >> timeout = ret; >> ret = 0; >
Hi Moritz, Sorry for asking. When you get chance, can you review this FPGA patch? Regards, Richard On 7/7/20 11:14 AM, richard.gong@linux.intel.com wrote: > From: Richard Gong <richard.gong@intel.com> > > When CTRL+C occurs during the process of FPGA reconfiguration, the FPGA > reconfiguration process stops and the user can't perform a new FPGA > reconfiguration properly. > > Set FPGA complete task to be not interruptible so that the user can > properly perform FPGA reconfiguration after CTRL+C event. > > Signed-off-by: Richard Gong <richard.gong@intel.com> > --- > drivers/fpga/stratix10-soc.c | 23 +++-------------------- > 1 file changed, 3 insertions(+), 20 deletions(-) > > diff --git a/drivers/fpga/stratix10-soc.c b/drivers/fpga/stratix10-soc.c > index 44b7c56..657a70c 100644 > --- a/drivers/fpga/stratix10-soc.c > +++ b/drivers/fpga/stratix10-soc.c > @@ -196,17 +196,13 @@ static int s10_ops_write_init(struct fpga_manager *mgr, > if (ret < 0) > goto init_done; > > - ret = wait_for_completion_interruptible_timeout( > + ret = wait_for_completion_timeout( > &priv->status_return_completion, S10_RECONFIG_TIMEOUT); > if (!ret) { > dev_err(dev, "timeout waiting for RECONFIG_REQUEST\n"); > ret = -ETIMEDOUT; > goto init_done; > } > - if (ret < 0) { > - dev_err(dev, "error (%d) waiting for RECONFIG_REQUEST\n", ret); > - goto init_done; > - } > > ret = 0; > if (!test_and_clear_bit(SVC_STATUS_OK, &priv->status)) { > @@ -318,7 +314,7 @@ static int s10_ops_write(struct fpga_manager *mgr, const char *buf, > */ > wait_status = 1; /* not timed out */ > if (!priv->status) > - wait_status = wait_for_completion_interruptible_timeout( > + wait_status = wait_for_completion_timeout( > &priv->status_return_completion, > S10_BUFFER_TIMEOUT); > > @@ -340,13 +336,6 @@ static int s10_ops_write(struct fpga_manager *mgr, const char *buf, > ret = -ETIMEDOUT; > break; > } > - if (wait_status < 0) { > - ret = wait_status; > - dev_err(dev, > - "error (%d) waiting for svc layer buffers\n", > - ret); > - break; > - } > } > > if (!s10_free_buffers(mgr)) > @@ -372,7 +361,7 @@ static int s10_ops_write_complete(struct fpga_manager *mgr, > if (ret < 0) > break; > > - ret = wait_for_completion_interruptible_timeout( > + ret = wait_for_completion_timeout( > &priv->status_return_completion, timeout); > if (!ret) { > dev_err(dev, > @@ -380,12 +369,6 @@ static int s10_ops_write_complete(struct fpga_manager *mgr, > ret = -ETIMEDOUT; > break; > } > - if (ret < 0) { > - dev_err(dev, > - "error (%d) waiting for RECONFIG_COMPLETED\n", > - ret); > - break; > - } > /* Not error or timeout, so ret is # of jiffies until timeout */ > timeout = ret; > ret = 0; >
diff --git a/drivers/fpga/stratix10-soc.c b/drivers/fpga/stratix10-soc.c index 44b7c56..657a70c 100644 --- a/drivers/fpga/stratix10-soc.c +++ b/drivers/fpga/stratix10-soc.c @@ -196,17 +196,13 @@ static int s10_ops_write_init(struct fpga_manager *mgr, if (ret < 0) goto init_done; - ret = wait_for_completion_interruptible_timeout( + ret = wait_for_completion_timeout( &priv->status_return_completion, S10_RECONFIG_TIMEOUT); if (!ret) { dev_err(dev, "timeout waiting for RECONFIG_REQUEST\n"); ret = -ETIMEDOUT; goto init_done; } - if (ret < 0) { - dev_err(dev, "error (%d) waiting for RECONFIG_REQUEST\n", ret); - goto init_done; - } ret = 0; if (!test_and_clear_bit(SVC_STATUS_OK, &priv->status)) { @@ -318,7 +314,7 @@ static int s10_ops_write(struct fpga_manager *mgr, const char *buf, */ wait_status = 1; /* not timed out */ if (!priv->status) - wait_status = wait_for_completion_interruptible_timeout( + wait_status = wait_for_completion_timeout( &priv->status_return_completion, S10_BUFFER_TIMEOUT); @@ -340,13 +336,6 @@ static int s10_ops_write(struct fpga_manager *mgr, const char *buf, ret = -ETIMEDOUT; break; } - if (wait_status < 0) { - ret = wait_status; - dev_err(dev, - "error (%d) waiting for svc layer buffers\n", - ret); - break; - } } if (!s10_free_buffers(mgr)) @@ -372,7 +361,7 @@ static int s10_ops_write_complete(struct fpga_manager *mgr, if (ret < 0) break; - ret = wait_for_completion_interruptible_timeout( + ret = wait_for_completion_timeout( &priv->status_return_completion, timeout); if (!ret) { dev_err(dev, @@ -380,12 +369,6 @@ static int s10_ops_write_complete(struct fpga_manager *mgr, ret = -ETIMEDOUT; break; } - if (ret < 0) { - dev_err(dev, - "error (%d) waiting for RECONFIG_COMPLETED\n", - ret); - break; - } /* Not error or timeout, so ret is # of jiffies until timeout */ timeout = ret; ret = 0;