diff mbox series

[V3,2/3] dt-bindings: spi: Convert imx cspi to json-schema

Message ID 1592281575-32708-3-git-send-email-Anson.Huang@nxp.com (mailing list archive)
State Mainlined
Commit 790739c4417c17b2201bc742a9d5d819ea71799f
Headers show
Series Convert mxs/imx spi/cspi/lpspi binding to json-schema | expand

Commit Message

Anson Huang June 16, 2020, 4:26 a.m. UTC
Convert the i.MX CSPI binding to DT schema format using json-schema,
update compatible, remove obsolete properties "fsl,spi-num-chipselects"
and update the example based on latest DT file.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V2:
	- remove redundant "maxItems" in "clocks" and "clock-names".
---
 .../devicetree/bindings/spi/fsl-imx-cspi.txt       | 56 -------------
 .../devicetree/bindings/spi/fsl-imx-cspi.yaml      | 97 ++++++++++++++++++++++
 2 files changed, 97 insertions(+), 56 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
 create mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml

Comments

Rob Herring (Arm) July 9, 2020, 11:26 p.m. UTC | #1
On Tue, 16 Jun 2020 12:26:14 +0800, Anson Huang wrote:
> Convert the i.MX CSPI binding to DT schema format using json-schema,
> update compatible, remove obsolete properties "fsl,spi-num-chipselects"
> and update the example based on latest DT file.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> Changes since V2:
> 	- remove redundant "maxItems" in "clocks" and "clock-names".
> ---
>  .../devicetree/bindings/spi/fsl-imx-cspi.txt       | 56 -------------
>  .../devicetree/bindings/spi/fsl-imx-cspi.yaml      | 97 ++++++++++++++++++++++
>  2 files changed, 97 insertions(+), 56 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
>  create mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
deleted file mode 100644
index 33bc58f..0000000
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ /dev/null
@@ -1,56 +0,0 @@ 
-* Freescale (Enhanced) Configurable Serial Peripheral Interface
-  (CSPI/eCSPI) for i.MX
-
-Required properties:
-- compatible :
-  - "fsl,imx1-cspi" for SPI compatible with the one integrated on i.MX1
-  - "fsl,imx21-cspi" for SPI compatible with the one integrated on i.MX21
-  - "fsl,imx27-cspi" for SPI compatible with the one integrated on i.MX27
-  - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31
-  - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
-  - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
-  - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
-  - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8MQ
-  - "fsl,imx8mm-ecspi" for SPI compatible with the one integrated on i.MX8MM
-  - "fsl,imx8mn-ecspi" for SPI compatible with the one integrated on i.MX8MN
-  - "fsl,imx8mp-ecspi" for SPI compatible with the one integrated on i.MX8MP
-- reg : Offset and length of the register set for the device
-- interrupts : Should contain CSPI/eCSPI interrupt
-- clocks : Clock specifiers for both ipg and per clocks.
-- clock-names : Clock names should include both "ipg" and "per"
-See the clock consumer binding,
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Recommended properties:
-- cs-gpios : GPIOs to use as chip selects, see spi-bus.txt.  While the native chip
-select lines can be used, they appear to always generate a pulse between each
-word of a transfer.  Most use cases will require GPIO based chip selects to
-generate a valid transaction.
-
-Optional properties:
-- num-cs :  Number of total chip selects, see spi-bus.txt.
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-Documentation/devicetree/bindings/dma/dma.txt.
-- dma-names: DMA request names, if present, should include "tx" and "rx".
-- fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register
-controlling the SPI_READY handling. Note that to enable the DRCTL consideration,
-the SPI_READY mode-flag needs to be set too.
-Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
-
-Obsolete properties:
-- fsl,spi-num-chipselects : Contains the number of the chipselect
-
-Example:
-
-ecspi@70010000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx51-ecspi";
-	reg = <0x70010000 0x4000>;
-	interrupts = <36>;
-	cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
-		   <&gpio3 25 0>; /* GPIO3_25 */
-	dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
-	dma-names = "rx", "tx";
-	fsl,spi-rdy-drctl = <1>;
-};
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
new file mode 100644
index 0000000..6e44c9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
@@ -0,0 +1,97 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/fsl-imx-cspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale (Enhanced) Configurable Serial Peripheral Interface (CSPI/eCSPI) for i.MX
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx1-cspi
+      - const: fsl,imx21-cspi
+      - const: fsl,imx27-cspi
+      - const: fsl,imx31-cspi
+      - const: fsl,imx35-cspi
+      - const: fsl,imx51-ecspi
+      - const: fsl,imx53-ecspi
+      - items:
+        - enum:
+          - fsl,imx50-ecspi
+          - fsl,imx6q-ecspi
+          - fsl,imx6sx-ecspi
+          - fsl,imx6sl-ecspi
+          - fsl,imx6sll-ecspi
+          - fsl,imx6ul-ecspi
+          - fsl,imx7d-ecspi
+          - fsl,imx8mq-ecspi
+          - fsl,imx8mm-ecspi
+          - fsl,imx8mn-ecspi
+          - fsl,imx8mp-ecspi
+        - const: fsl,imx51-ecspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC SPI ipg clock
+      - description: SoC SPI per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  fsl,spi-rdy-drctl:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Integer, representing the value of DRCTL, the register controlling
+      the SPI_READY handling. Note that to enable the DRCTL consideration,
+      the SPI_READY mode-flag needs to be set too.
+      Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
+    enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    spi@70010000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx51-ecspi";
+        reg = <0x70010000 0x4000>;
+        interrupts = <36>;
+        clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+                 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+        clock-names = "ipg", "per";
+    };