diff mbox series

[v2] Since am437x have the same clock structure with am335x [1][2], reuse the code from Tony Lindgren's patch [3] to fix dcan probe failed on am437x platform.

Message ID 1594696998-3995-2-git-send-email-dillon.minfei@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v2] Since am437x have the same clock structure with am335x [1][2], reuse the code from Tony Lindgren's patch [3] to fix dcan probe failed on am437x platform. | expand

Commit Message

Dillon Min July 14, 2020, 3:23 a.m. UTC 
From: dillon min <dillon.minfei@gmail.com>

Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision")

[1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
Integration
[2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
Integration
[3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x")

Signed-off-by: dillon min <dillon.minfei@gmail.com>
---

Hi Stephen,

This changes correct commit messages based on your reviewing.
make Fixes tags to oneline.
make all commit message tags at the end of commit message


 arch/arm/boot/dts/am437x-l4.dtsi | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

Comments

Stephen Rothwell July 14, 2020, 3:38 a.m. UTC | #1 
Hi,

On Tue, 14 Jul 2020 11:23:18 +0800 dillon.minfei@gmail.com wrote:
>
> From: dillon min <dillon.minfei@gmail.com>
> 
> Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision")
> 
> [1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
> Integration
> [2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
> Integration
> [3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x")
> 
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> ---
> 
> Hi Stephen,
> 
> This changes correct commit messages based on your reviewing.
> make Fixes tags to oneline.
> make all commit message tags at the end of commit message

But the Fixes: line should be down with the Signed-off-by: line ...
Dillon Min July 14, 2020, 3:43 a.m. UTC | #2 
On Tue, Jul 14, 2020 at 11:38 AM Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> Hi,
>
> On Tue, 14 Jul 2020 11:23:18 +0800 dillon.minfei@gmail.com wrote:
> >
> > From: dillon min <dillon.minfei@gmail.com>
> >
> > Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision")
> >
> > [1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
> > Integration
> > [2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
> > Integration
> > [3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x")
> >
> > Signed-off-by: dillon min <dillon.minfei@gmail.com>
> > ---
> >
> > Hi Stephen,
> >
> > This changes correct commit messages based on your reviewing.
> > make Fixes tags to oneline.
> > make all commit message tags at the end of commit message
>
> But the Fixes: line should be down with the Signed-off-by: line ...
>
Ok, should it be like this，i will resubmit it.

Subject: [PATCH v2] Since am437x have the same clock structure with am335x
 [1][2], reuse the code from Tony Lindgren's patch [3] to fix dcan
 probe failed on the am437x platform.

[1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
Integration
[2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
Integration
[3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x")

Signed-off-by: dillon min <dillon.minfei@gmail.com>
Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during
init to read revision")

Thanks,
Dillon,
> --
> Cheers,
> Stephen Rothwell
Stephen Rothwell July 14, 2020, 3:54 a.m. UTC | #3 
Hi Dillon,

On Tue, 14 Jul 2020 11:43:31 +0800 dillon min <dillon.minfei@gmail.com> wrote:
>
> On Tue, Jul 14, 2020 at 11:38 AM Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> >
> > On Tue, 14 Jul 2020 11:23:18 +0800 dillon.minfei@gmail.com wrote:  
> > >
> > > From: dillon min <dillon.minfei@gmail.com>
> > >
> > > Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision")
> > >
> > > [1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
> > > Integration
> > > [2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
> > > Integration
> > > [3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x")
> > >
> > > Signed-off-by: dillon min <dillon.minfei@gmail.com>
> > > ---
> > >
> > > Hi Stephen,
> > >
> > > This changes correct commit messages based on your reviewing.
> > > make Fixes tags to oneline.
> > > make all commit message tags at the end of commit message  
> >
> > But the Fixes: line should be down with the Signed-off-by: line ...
> >  
> Ok, should it be like this，i will resubmit it.
> 
> Subject: [PATCH v2] Since am437x have the same clock structure with am335x
>  [1][2], reuse the code from Tony Lindgren's patch [3] to fix dcan
>  probe failed on the am437x platform.

You should have a shorter subject and maybe the above could be the
first paragraph of the commit message.

> 
> [1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
> Integration
> [2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
> Integration
> [3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x")
> 
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during
> init to read revision")

No wrapping the the Fixes line, please and it would usually go before
your Signed=off-by line
Dillon Min July 14, 2020, 5:21 a.m. UTC | #4 
On Tue, Jul 14, 2020 at 11:54 AM Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> Hi Dillon,
>
> On Tue, 14 Jul 2020 11:43:31 +0800 dillon min <dillon.minfei@gmail.com> wrote:
> >
> > On Tue, Jul 14, 2020 at 11:38 AM Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> > >
> > > On Tue, 14 Jul 2020 11:23:18 +0800 dillon.minfei@gmail.com wrote:
> > > >
> > > > From: dillon min <dillon.minfei@gmail.com>
> > > >
> > > > Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision")
> > > >
> > > > [1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
> > > > Integration
> > > > [2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
> > > > Integration
> > > > [3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x")
> > > >
> > > > Signed-off-by: dillon min <dillon.minfei@gmail.com>
> > > > ---
> > > >
> > > > Hi Stephen,
> > > >
> > > > This changes correct commit messages based on your reviewing.
> > > > make Fixes tags to oneline.
> > > > make all commit message tags at the end of commit message
> > >
> > > But the Fixes: line should be down with the Signed-off-by: line ...
> > >
> > Ok, should it be like this，i will resubmit it.
> >
> > Subject: [PATCH v2] Since am437x have the same clock structure with am335x
> >  [1][2], reuse the code from Tony Lindgren's patch [3] to fix dcan
> >  probe failed on the am437x platform.
>
> You should have a shorter subject and maybe the above could be the
> first paragraph of the commit message.
>
> >
> > [1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
> > Integration
> > [2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
> > Integration
> > [3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x")
> >
> > Signed-off-by: dillon min <dillon.minfei@gmail.com>
> > Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during
> > init to read revision")
>
> No wrapping the the Fixes line, please and it would usually go before
> your Signed=off-by line

Hi Stephen,

Thanks, how about the below commit message.

Subject: [PATCH v4] Fix dcan driver probe failed on am437x platform

Got following d_can probe errors with kernel 5.8-rc1 on am437x

[   10.730822] CAN device driver interface
Starting Wait for Network to be Configured...
[  OK  ] Reached target Network.
[   10.787363] c_can_platform 481cc000.can: probe failed
[   10.792484] c_can_platform: probe of 481cc000.can failed with
error -2
[   10.799457] c_can_platform 481d0000.can: probe failed
[   10.804617] c_can_platform: probe of 481d0000.can failed with
error -2

actually, Tony has fixed this issue on am335x with the patch [3]

Since am437x has the same clock structure with am335x
[1][2], so reuse the code from Tony Lindgren's patch [3] to fix it.


[1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
Integration
[2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
Integration
[3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x")

Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during
init to read revision")
Signed-off-by: dillon min <dillon.minfei@gmail.com>
---

Hi Stephen,

This changes correct commit messages based on your reviewing.
make Fixes tags to oneline.
make all commit message tags at the end of commit message
make Fixes tags before Signed-off-by line.
add probe failed log to commit message.


> --
> Cheers,
> Stephen Rothwell
Stephen Rothwell July 14, 2020, 5:36 a.m. UTC | #5 
Hi Dillon,

On Tue, 14 Jul 2020 13:21:07 +0800 dillon min <dillon.minfei@gmail.com> wrote:
>
> Thanks, how about the below commit message.
> 
> Subject: [PATCH v4] Fix dcan driver probe failed on am437x platform
> 
> Got following d_can probe errors with kernel 5.8-rc1 on am437x
> 
> [   10.730822] CAN device driver interface
> Starting Wait for Network to be Configured...
> [  OK  ] Reached target Network.
> [   10.787363] c_can_platform 481cc000.can: probe failed
> [   10.792484] c_can_platform: probe of 481cc000.can failed with
> error -2
> [   10.799457] c_can_platform 481d0000.can: probe failed
> [   10.804617] c_can_platform: probe of 481d0000.can failed with
> error -2
> 
> actually, Tony has fixed this issue on am335x with the patch [3]
> 
> Since am437x has the same clock structure with am335x
> [1][2], so reuse the code from Tony Lindgren's patch [3] to fix it.
> 
> 
> [1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
> Integration
> [2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
> Integration
> [3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x")
> 
> Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during
> init to read revision")
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> ---
> 
> Hi Stephen,
> 
> This changes correct commit messages based on your reviewing.
> make Fixes tags to oneline.
> make all commit message tags at the end of commit message
> make Fixes tags before Signed-off-by line.
> add probe failed log to commit message.

Apart from the line wrapping, that looks better.  I assume that your
email client (looks like Gmail web gui) is wrapping the lines, please
see if you can stop it doing that (see the section on Gmail in
Documentation/process/email-clients.rst).
Dillon Min July 14, 2020, 6:33 a.m. UTC | #6 
Hi Stephen,

On Tue, Jul 14, 2020 at 1:37 PM Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> Hi Dillon,
>
> On Tue, 14 Jul 2020 13:21:07 +0800 dillon min <dillon.minfei@gmail.com> wrote:
> >
> > Thanks, how about the below commit message.
> >
> > Subject: [PATCH v4] Fix dcan driver probe failed on am437x platform
> >
> > Got following d_can probe errors with kernel 5.8-rc1 on am437x
> >
> > [   10.730822] CAN device driver interface
> > Starting Wait for Network to be Configured...
> > [  OK  ] Reached target Network.
> > [   10.787363] c_can_platform 481cc000.can: probe failed
> > [   10.792484] c_can_platform: probe of 481cc000.can failed with
> > error -2
> > [   10.799457] c_can_platform 481d0000.can: probe failed
> > [   10.804617] c_can_platform: probe of 481d0000.can failed with
> > error -2
> >
> > actually, Tony has fixed this issue on am335x with the patch [3]
> >
> > Since am437x has the same clock structure with am335x
> > [1][2], so reuse the code from Tony Lindgren's patch [3] to fix it.
> >
> >
> > [1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
> > Integration
> > [2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
> > Integration
> > [3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x")
> >
> > Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during
> > init to read revision")
> > Signed-off-by: dillon min <dillon.minfei@gmail.com>
> > ---
> >
> > Hi Stephen,
> >
> > This changes correct commit messages based on your reviewing.
> > make Fixes tags to oneline.
> > make all commit message tags at the end of commit message
> > make Fixes tags before Signed-off-by line.
> > add probe failed log to commit message.
>
> Apart from the line wrapping, that looks better.  I assume that your
> email client (looks like Gmail web gui) is wrapping the lines, please
> see if you can stop it doing that (see the section on Gmail in
> Documentation/process/email-clients.rst).
>
Thanks.
I checked with git send-email , there is no line wrapping. maybe gmail just has
the feature which text be split into lines of about 78 characters in
gmail web clients.

if add '>' before the line which exceeds 78 characters in gmail web
clients, this line will not be wrapped.

>Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision")

I will sumit v4 version for you.

thanks,
dillon,

> --
> Cheers,
> Stephen Rothwell
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index 0d0f9fe4a882..4129affde54e 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -1541,8 +1541,9 @@ 
 			reg = <0xcc020 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
-			clock-names = "fck";
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>,
+			<&dcan0_fck>;
+			clock-names = "fck", "osc";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xcc000 0x2000>;
@@ -1550,6 +1551,8 @@ 
 			dcan0: can@0 {
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
+				clocks = <&dcan0_fck>;
+				clock-names = "fck";
 				syscon-raminit = <&scm_conf 0x644 0>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1561,8 +1564,9 @@ 
 			reg = <0xd0020 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
-			clock-names = "fck";
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>,
+			<&dcan1_fck>;
+			clock-names = "fck", "osc";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xd0000 0x2000>;
@@ -1570,6 +1574,8 @@ 
 			dcan1: can@0 {
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
+				clocks = <&dcan1_fck>;
+				clock-name = "fck";
 				syscon-raminit = <&scm_conf 0x644 1>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";