| Message ID | 20200709174556.7651-17-lee.jones@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Set 3: Fix another set of SCSI related W=1 warnings | expand |
Acked-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> -----Original Message----- From: linux-scsi-owner@vger.kernel.org <linux-scsi-owner@vger.kernel.org> On Behalf Of Lee Jones Sent: Thursday, July 9, 2020 10:46 AM To: jejb@linux.ibm.com; martin.petersen@oracle.com; linux-scsi@vger.kernel.org Cc: linux-kernel@vger.kernel.org; Lee Jones <lee.jones@linaro.org>; Kashyap Desai <kashyap.desai@broadcom.com>; Sumit Saxena <sumit.saxena@broadcom.com>; Shivasharan S <shivasharan.srikanteshwara@broadcom.com>; Christoph Hellwig <hch@lst.de>; Seokmann.Ju@lsil.com; sju@lsil.com; megaraidlinux.pdl@broadcom.com Subject: [PATCH 16/24] scsi: megaraid: Fix a whole bunch of function header formatting issues Plus a couple of API catch-ups. Fixes the following W=1 kernel build warning(s): drivers/scsi/megaraid.c:133: warning: Function parameter or member 'adapter' not described in 'mega_setup_mailbox' drivers/scsi/megaraid.c:356: warning: Function parameter or member 'adapter' not described in 'mega_runpendq' drivers/scsi/megaraid.c:424: warning: Function parameter or member 'adapter' not described in 'mega_allocate_scb' drivers/scsi/megaraid.c:424: warning: Function parameter or member 'cmd' not described in 'mega_allocate_scb' drivers/scsi/megaraid.c:456: warning: Function parameter or member 'adapter' not described in 'mega_get_ldrv_num' drivers/scsi/megaraid.c:456: warning: Function parameter or member 'cmd' not described in 'mega_get_ldrv_num' drivers/scsi/megaraid.c:456: warning: Function parameter or member 'channel' not described in 'mega_get_ldrv_num' drivers/scsi/megaraid.c:519: warning: Function parameter or member 'adapter' not described in 'mega_build_cmd' drivers/scsi/megaraid.c:519: warning: Function parameter or member 'cmd' not described in 'mega_build_cmd' drivers/scsi/megaraid.c:519: warning: Function parameter or member 'busy' not described in 'mega_build_cmd' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'adapter' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'scb' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'cmd' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'channel' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'target' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'adapter' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'scb' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'cmd' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'channel' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'target' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1097: warning: Function parameter or member 'adapter' not described in 'issue_scb' drivers/scsi/megaraid.c:1097: warning: Function parameter or member 'scb' not described in 'issue_scb' drivers/scsi/megaraid.c:1176: warning: Function parameter or member 'adapter' not described in 'issue_scb_block' drivers/scsi/megaraid.c:1176: warning: Function parameter or member 'raw_mbox' not described in 'issue_scb_block' drivers/scsi/megaraid.c:1259: warning: Function parameter or member 'irq' not described in 'megaraid_isr_iomapped' drivers/scsi/megaraid.c:1259: warning: Function parameter or member 'devp' not described in 'megaraid_isr_iomapped' drivers/scsi/megaraid.c:1335: warning: Function parameter or member 'irq' not described in 'megaraid_isr_memmapped' drivers/scsi/megaraid.c:1335: warning: Function parameter or member 'devp' not described in 'megaraid_isr_memmapped' drivers/scsi/megaraid.c:1413: warning: Function parameter or member 'adapter' not described in 'mega_cmd_done' drivers/scsi/megaraid.c:1413: warning: Function parameter or member 'completed' not described in 'mega_cmd_done' drivers/scsi/megaraid.c:1413: warning: Function parameter or member 'nstatus' not described in 'mega_cmd_done' drivers/scsi/megaraid.c:1413: warning: Function parameter or member 'status' not described in 'mega_cmd_done' drivers/scsi/megaraid.c:1933: warning: Function parameter or member 'adapter' not described in 'megaraid_abort_and_reset' drivers/scsi/megaraid.c:1933: warning: Function parameter or member 'cmd' not described in 'megaraid_abort_and_reset' drivers/scsi/megaraid.c:1933: warning: Function parameter or member 'aor' not described in 'megaraid_abort_and_reset' drivers/scsi/megaraid.c:2031: warning: Function parameter or member 'dma_handle' not described in 'mega_allocate_inquiry' drivers/scsi/megaraid.c:2031: warning: Function parameter or member 'pdev' not described in 'mega_allocate_inquiry' drivers/scsi/megaraid.c:2055: warning: Function parameter or member 'm' not described in 'proc_show_config' drivers/scsi/megaraid.c:2055: warning: Function parameter or member 'v' not described in 'proc_show_config' drivers/scsi/megaraid.c:2119: warning: Function parameter or member 'm' not described in 'proc_show_stat' drivers/scsi/megaraid.c:2119: warning: Function parameter or member 'v' not described in 'proc_show_stat' drivers/scsi/megaraid.c:2154: warning: Function parameter or member 'm' not described in 'proc_show_mbox' drivers/scsi/megaraid.c:2154: warning: Function parameter or member 'v' not described in 'proc_show_mbox' drivers/scsi/megaraid.c:2181: warning: Function parameter or member 'm' not described in 'proc_show_rebuild_rate' drivers/scsi/megaraid.c:2181: warning: Function parameter or member 'v' not described in 'proc_show_rebuild_rate' drivers/scsi/megaraid.c:2224: warning: Function parameter or member 'm' not described in 'proc_show_battery' drivers/scsi/megaraid.c:2224: warning: Function parameter or member 'v' not described in 'proc_show_battery' drivers/scsi/megaraid.c:2328: warning: Function parameter or member 'm' not described in 'proc_show_pdrv' drivers/scsi/megaraid.c:2328: warning: Function parameter or member 'adapter' not described in 'proc_show_pdrv' drivers/scsi/megaraid.c:2328: warning: Function parameter or member 'channel' not described in 'proc_show_pdrv' drivers/scsi/megaraid.c:2443: warning: Function parameter or member 'm' not described in 'proc_show_pdrv_ch0' drivers/scsi/megaraid.c:2443: warning: Function parameter or member 'v' not described in 'proc_show_pdrv_ch0' drivers/scsi/megaraid.c:2457: warning: Function parameter or member 'm' not described in 'proc_show_pdrv_ch1' drivers/scsi/megaraid.c:2457: warning: Function parameter or member 'v' not described in 'proc_show_pdrv_ch1' drivers/scsi/megaraid.c:2471: warning: Function parameter or member 'm' not described in 'proc_show_pdrv_ch2' drivers/scsi/megaraid.c:2471: warning: Function parameter or member 'v' not described in 'proc_show_pdrv_ch2' drivers/scsi/megaraid.c:2485: warning: Function parameter or member 'm' not described in 'proc_show_pdrv_ch3' drivers/scsi/megaraid.c:2485: warning: Function parameter or member 'v' not described in 'proc_show_pdrv_ch3' drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'm' not described in 'proc_show_rdrv' drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'adapter' not described in 'proc_show_rdrv' drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'start' not described in 'proc_show_rdrv' drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'end' not described in 'proc_show_rdrv' drivers/scsi/megaraid.c:2684: warning: Function parameter or member 'm' not described in 'proc_show_rdrv_10' drivers/scsi/megaraid.c:2684: warning: Function parameter or member 'v' not described in 'proc_show_rdrv_10' drivers/scsi/megaraid.c:2698: warning: Function parameter or member 'm' not described in 'proc_show_rdrv_20' drivers/scsi/megaraid.c:2698: warning: Function parameter or member 'v' not described in 'proc_show_rdrv_20' drivers/scsi/megaraid.c:2712: warning: Function parameter or member 'm' not described in 'proc_show_rdrv_30' drivers/scsi/megaraid.c:2712: warning: Function parameter or member 'v' not described in 'proc_show_rdrv_30' drivers/scsi/megaraid.c:2726: warning: Function parameter or member 'm' not described in 'proc_show_rdrv_40' drivers/scsi/megaraid.c:2726: warning: Function parameter or member 'v' not described in 'proc_show_rdrv_40' drivers/scsi/megaraid.c:2739: warning: Function parameter or member 'index' not described in 'mega_create_proc_entry' drivers/scsi/megaraid.c:2739: warning: Function parameter or member 'parent' not described in 'mega_create_proc_entry' drivers/scsi/megaraid.c:2796: warning: Function parameter or member 'sdev' not described in 'megaraid_biosparam' drivers/scsi/megaraid.c:2796: warning: Function parameter or member 'bdev' not described in 'megaraid_biosparam' drivers/scsi/megaraid.c:2796: warning: Function parameter or member 'capacity' not described in 'megaraid_biosparam' drivers/scsi/megaraid.c:2796: warning: Function parameter or member 'geom' not described in 'megaraid_biosparam' drivers/scsi/megaraid.c:2865: warning: Function parameter or member 'adapter' not described in 'mega_init_scb' drivers/scsi/megaraid.c:2945: warning: Function parameter or member 'inode' not described in 'megadev_open' drivers/scsi/megaraid.c:2945: warning: Function parameter or member 'filep' not described in 'megadev_open' drivers/scsi/megaraid.c:2969: warning: Function parameter or member 'filep' not described in 'megadev_ioctl' drivers/scsi/megaraid.c:2969: warning: Function parameter or member 'cmd' not described in 'megadev_ioctl' drivers/scsi/megaraid.c:2969: warning: Function parameter or member 'arg' not described in 'megadev_ioctl' drivers/scsi/megaraid.c:3383: warning: Function parameter or member 'arg' not described in 'mega_m_to_n' drivers/scsi/megaraid.c:3383: warning: Function parameter or member 'uioc' not described in 'mega_m_to_n' drivers/scsi/megaraid.c:3574: warning: Function parameter or member 'adapter' not described in 'mega_is_bios_enabled' drivers/scsi/megaraid.c:3607: warning: Function parameter or member 'adapter' not described in 'mega_enum_raid_scsi' drivers/scsi/megaraid.c:3661: warning: Function parameter or member 'adapter' not described in 'mega_get_boot_drv' drivers/scsi/megaraid.c:3728: warning: Function parameter or member 'adapter' not described in 'mega_support_random_del' drivers/scsi/megaraid.c:3757: warning: Function parameter or member 'adapter' not described in 'mega_support_ext_cdb' drivers/scsi/megaraid.c:3787: warning: Function parameter or member 'adapter' not described in 'mega_del_logdrv' drivers/scsi/megaraid.c:3787: warning: Function parameter or member 'logdrv' not described in 'mega_del_logdrv' drivers/scsi/megaraid.c:3872: warning: Function parameter or member 'adapter' not described in 'mega_get_max_sgl' drivers/scsi/megaraid.c:3917: warning: Function parameter or member 'adapter' not described in 'mega_support_cluster' drivers/scsi/megaraid.c:3962: warning: Function parameter or member 'adapter' not described in 'mega_adapinq' drivers/scsi/megaraid.c:3962: warning: Function parameter or member 'dma_handle' not described in 'mega_adapinq' drivers/scsi/megaraid.c:4071: warning: Function parameter or member 'adapter' not described in 'mega_internal_command' drivers/scsi/megaraid.c:4071: warning: Function parameter or member 'mc' not described in 'mega_internal_command' drivers/scsi/megaraid.c:4071: warning: Function parameter or member 'pthru' not described in 'mega_internal_command' Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Seokmann.Ju@lsil.com Cc: sju@lsil.com Cc: megaraidlinux.pdl@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/scsi/megaraid.c | 218 ++++++++++++++++++++-------------------- 1 file changed, 109 insertions(+), 109 deletions(-) diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index f27ffd088c8ae..2d57836d1607f 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -124,7 +124,7 @@ static int trace_level; /** * mega_setup_mailbox() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Allocates a 8 byte aligned memory for the handshake mailbox. */ @@ -178,9 +178,9 @@ mega_setup_mailbox(adapter_t *adapter) } -/* +/** * mega_query_adapter() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Issue the adapter inquiry commands to the controller and find out * information and parameter about the devices attached @@ -347,7 +347,7 @@ mega_query_adapter(adapter_t *adapter) /** * mega_runpendq() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Runs through the list of pending requests. */ @@ -358,10 +358,10 @@ mega_runpendq(adapter_t *adapter) __mega_runpendq(adapter); } -/* +/** * megaraid_queue() - * @scmd - Issue this scsi command - * @done - the callback hook into the scsi mid-layer + * @scmd: Issue this scsi command + * @done: the callback hook into the scsi mid-layer * * The command queuing entry point for the mid-layer. */ @@ -413,8 +413,8 @@ static DEF_SCSI_QCMD(megaraid_queue) /** * mega_allocate_scb() - * @adapter - pointer to our soft state - * @cmd - scsi command from the mid-layer + * @adapter: pointer to our soft state + * @cmd: scsi command from the mid-layer * * Allocate a SCB structure. This is the central structure for controller * commands. @@ -444,9 +444,9 @@ mega_allocate_scb(adapter_t *adapter, struct scsi_cmnd *cmd) /** * mega_get_ldrv_num() - * @adapter - pointer to our soft state - * @cmd - scsi mid layer command - * @channel - channel on the controller + * @adapter: pointer to our soft state + * @cmd: scsi mid layer command + * @channel: channel on the controller * * Calculate the logical drive number based on the information in scsi command * and the channel number. @@ -503,9 +503,9 @@ mega_get_ldrv_num(adapter_t *adapter, struct scsi_cmnd *cmd, int channel) /** * mega_build_cmd() - * @adapter - pointer to our soft state - * @cmd - Prepare using this scsi command - * @busy - busy flag if no resources + * @adapter: pointer to our soft state + * @cmd: Prepare using this scsi command + * @busy: busy flag if no resources * * Prepares a command and scatter gather list for the controller. This routine * also finds out if the commands is intended for a logical drive or a @@ -937,11 +937,11 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy) /** * mega_prepare_passthru() - * @adapter - pointer to our soft state - * @scb - our scsi control block - * @cmd - scsi command from the mid-layer - * @channel - actual channel on the controller - * @target - actual id on the controller. + * @adapter: pointer to our soft state + * @scb: our scsi control block + * @cmd: scsi command from the mid-layer + * @channel: actual channel on the controller + * @target: actual id on the controller. * * prepare a command for the scsi physical devices. */ @@ -1000,11 +1000,11 @@ mega_prepare_passthru(adapter_t *adapter, scb_t *scb, struct scsi_cmnd *cmd, /** * mega_prepare_extpassthru() - * @adapter - pointer to our soft state - * @scb - our scsi control block - * @cmd - scsi command from the mid-layer - * @channel - actual channel on the controller - * @target - actual id on the controller. + * @adapter: pointer to our soft state + * @scb: our scsi control block + * @cmd: scsi command from the mid-layer + * @channel: actual channel on the controller + * @target: actual id on the controller. * * prepare a command for the scsi physical devices. This rountine prepares * commands for devices which can take extended CDBs (>10 bytes) @@ -1085,8 +1085,8 @@ __mega_runpendq(adapter_t *adapter) /** * issue_scb() - * @adapter - pointer to our soft state - * @scb - scsi control block + * @adapter: pointer to our soft state + * @scb: scsi control block * * Post a command to the card if the mailbox is available, otherwise return * busy. We also take the scb from the pending list if the mailbox is @@ -1166,8 +1166,8 @@ mega_busywait_mbox (adapter_t *adapter) /** * issue_scb_block() - * @adapter - pointer to our soft state - * @raw_mbox - the mailbox + * @adapter: pointer to our soft state + * @raw_mbox: the mailbox * * Issue a scb in synchronous and non-interrupt mode */ @@ -1247,8 +1247,8 @@ issue_scb_block(adapter_t *adapter, u_char *raw_mbox) /** * megaraid_isr_iomapped() - * @irq - irq - * @devp - pointer to our soft state + * @irq: irq + * @devp: pointer to our soft state * * Interrupt service routine for io-mapped controllers. * Find out if our device is interrupting. If yes, acknowledge the interrupt @@ -1323,8 +1323,8 @@ megaraid_isr_iomapped(int irq, void *devp) /** * megaraid_isr_memmapped() - * @irq - irq - * @devp - pointer to our soft state + * @irq: irq + * @devp: pointer to our soft state * * Interrupt service routine for memory-mapped controllers. * Find out if our device is interrupting. If yes, acknowledge the interrupt @@ -1401,10 +1401,10 @@ megaraid_isr_memmapped(int irq, void *devp) } /** * mega_cmd_done() - * @adapter - pointer to our soft state - * @completed - array of ids of completed commands - * @nstatus - number of completed commands - * @status - status of the last command completed + * @adapter: pointer to our soft state + * @completed: array of ids of completed commands + * @nstatus: number of completed commands + * @status: status of the last command completed * * Complete the commands and call the scsi mid-layer callback hooks. */ @@ -1921,9 +1921,9 @@ megaraid_reset(struct scsi_cmnd *cmd) /** * megaraid_abort_and_reset() - * @adapter - megaraid soft state - * @cmd - scsi command to be aborted or reset - * @aor - abort or reset flag + * @adapter: megaraid soft state + * @cmd: scsi command to be aborted or reset + * @aor: abort or reset flag * * Try to locate the scsi command in the pending queue. If found and is not * issued to the controller, abort/reset it. Otherwise return failure @@ -2021,8 +2021,8 @@ free_local_pdev(struct pci_dev *pdev) /** * mega_allocate_inquiry() - * @dma_handle - handle returned for dma address - * @pdev - handle to pci device + * @dma_handle: handle returned for dma address + * @pdev: handle to pci device * * allocates memory for inquiry structure */ @@ -2045,8 +2045,8 @@ mega_free_inquiry(void *inquiry, dma_addr_t dma_handle, struct pci_dev *pdev) /** * proc_show_config() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display configuration information about the controller. */ @@ -2109,8 +2109,8 @@ proc_show_config(struct seq_file *m, void *v) /** * proc_show_stat() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display statistical information about the I/O activity. */ @@ -2143,8 +2143,8 @@ proc_show_stat(struct seq_file *m, void *v) /** * proc_show_mbox() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display mailbox information for the last command issued. This information * is good for debugging. @@ -2171,8 +2171,8 @@ proc_show_mbox(struct seq_file *m, void *v) /** * proc_show_rebuild_rate() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display current rebuild rate */ @@ -2214,8 +2214,8 @@ proc_show_rebuild_rate(struct seq_file *m, void *v) /** * proc_show_battery() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display information about the battery module on the controller. */ @@ -2317,9 +2317,9 @@ mega_print_inquiry(struct seq_file *m, char *scsi_inq) /** * proc_show_pdrv() - * @m - Synthetic file construction data - * @page - buffer to write the data in - * @adapter - pointer to our soft state + * @m: Synthetic file construction data + * @adapter: pointer to our soft state + * @channel: channel on the controller * * Display information about the physical drives. */ @@ -2433,8 +2433,8 @@ proc_show_pdrv(struct seq_file *m, adapter_t *adapter, int channel) /** * proc_show_pdrv_ch0() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display information about the physical drives on physical channel 0. */ @@ -2447,8 +2447,8 @@ proc_show_pdrv_ch0(struct seq_file *m, void *v) /** * proc_show_pdrv_ch1() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display information about the physical drives on physical channel 1. */ @@ -2461,8 +2461,8 @@ proc_show_pdrv_ch1(struct seq_file *m, void *v) /** * proc_show_pdrv_ch2() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display information about the physical drives on physical channel 2. */ @@ -2475,8 +2475,8 @@ proc_show_pdrv_ch2(struct seq_file *m, void *v) /** * proc_show_pdrv_ch3() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display information about the physical drives on physical channel 3. */ @@ -2489,10 +2489,10 @@ proc_show_pdrv_ch3(struct seq_file *m, void *v) /** * proc_show_rdrv() - * @m - Synthetic file construction data - * @adapter - pointer to our soft state - * @start - starting logical drive to display - * @end - ending logical drive to display + * @m: Synthetic file construction data + * @adapter: pointer to our soft state + * @start: starting logical drive to display + * @end: ending logical drive to display * * We do not print the inquiry information since its already available through * /proc/scsi/scsi interface @@ -2674,8 +2674,8 @@ proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start, int end ) /** * proc_show_rdrv_10() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display real time information about the logical drives 0 through 9. */ @@ -2688,8 +2688,8 @@ proc_show_rdrv_10(struct seq_file *m, void *v) /** * proc_show_rdrv_20() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display real time information about the logical drives 0 through 9. */ @@ -2702,8 +2702,8 @@ proc_show_rdrv_20(struct seq_file *m, void *v) /** * proc_show_rdrv_30() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display real time information about the logical drives 0 through 9. */ @@ -2716,8 +2716,8 @@ proc_show_rdrv_30(struct seq_file *m, void *v) /** * proc_show_rdrv_40() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display real time information about the logical drives 0 through 9. */ @@ -2729,8 +2729,8 @@ proc_show_rdrv_40(struct seq_file *m, void *v) /** * mega_create_proc_entry() - * @index - index in soft state array - * @parent - parent node for this /proc entry + * @index: index in soft state array + * @parent: parent node for this /proc entry * * Creates /proc entries for our controllers. */ @@ -2785,7 +2785,7 @@ static inline void mega_create_proc_entry(int index, struct proc_dir_entry *pare #endif -/** +/* * megaraid_biosparam() * * Return the disk geometry for a particular disk @@ -2854,7 +2854,7 @@ megaraid_biosparam(struct scsi_device *sdev, struct block_device *bdev, /** * mega_init_scb() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Allocate memory for the various pointers in the scb structures: * scatter-gather list pointer, passthru and extended passthru structure @@ -2934,8 +2934,8 @@ mega_init_scb(adapter_t *adapter) /** * megadev_open() - * @inode - unused - * @filep - unused + * @inode: unused + * @filep: unused * * Routines for the character/ioctl interface to the driver. Find out if this * is a valid open. @@ -2954,10 +2954,9 @@ megadev_open (struct inode *inode, struct file *filep) /** * megadev_ioctl() - * @inode - Our device inode - * @filep - unused - * @cmd - ioctl command - * @arg - user buffer + * @filep: unused + * @cmd: ioctl command + * @arg: user buffer * * ioctl entry point for our private ioctl interface. We move the data in from * the user space, prepare the command (if necessary, convert the old MIMD @@ -3370,8 +3369,8 @@ megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) /** * mega_m_to_n() - * @arg - user address - * @uioc - new ioctl structure + * @arg: user address + * @uioc: new ioctl structure * * A thin layer to convert older mimd interface ioctl structure to NIT ioctl * structure @@ -3496,10 +3495,10 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc) return 0; } -/* +/** * mega_n_to_m() - * @arg - user address - * @mc - mailbox command + * @arg: user address + * @mc: mailbox command * * Updates the status information to the application, depending on application * conforms to older mimd ioctl interface or newer NIT ioctl interface @@ -3565,7 +3564,7 @@ mega_n_to_m(void __user *arg, megacmd_t *mc) /** * mega_is_bios_enabled() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * issue command to find out if the BIOS is enabled for this controller */ @@ -3596,7 +3595,7 @@ mega_is_bios_enabled(adapter_t *adapter) /** * mega_enum_raid_scsi() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Find out what channels are RAID/SCSI. This information is used to * differentiate the virtual channels and physical channels and to support @@ -3651,7 +3650,7 @@ mega_enum_raid_scsi(adapter_t *adapter) /** * mega_get_boot_drv() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Find out which device is the boot device. Note, any logical drive or any * phyical device (e.g., a CDROM) can be designated as a boot device. @@ -3718,7 +3717,7 @@ mega_get_boot_drv(adapter_t *adapter) /** * mega_support_random_del() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Find out if this controller supports random deletion and addition of * logical drives @@ -3748,7 +3747,7 @@ mega_support_random_del(adapter_t *adapter) /** * mega_support_ext_cdb() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Find out if this firmware support cdblen > 10 */ @@ -3776,8 +3775,8 @@ mega_support_ext_cdb(adapter_t *adapter) /** * mega_del_logdrv() - * @adapter - pointer to our soft state - * @logdrv - logical drive to be deleted + * @adapter: pointer to our soft state + * @logdrv: logical drive to be deleted * * Delete the specified logical drive. It is the responsibility of the user * app to let the OS know about this operation. @@ -3862,7 +3861,7 @@ mega_do_del_logdrv(adapter_t *adapter, int logdrv) /** * mega_get_max_sgl() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Find out the maximum number of scatter-gather elements supported by this * version of the firmware @@ -3908,7 +3907,7 @@ mega_get_max_sgl(adapter_t *adapter) /** * mega_support_cluster() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Find out if this firmware support cluster calls. */ @@ -3950,8 +3949,8 @@ mega_support_cluster(adapter_t *adapter) #ifdef CONFIG_PROC_FS /** * mega_adapinq() - * @adapter - pointer to our soft state - * @dma_handle - DMA address of the buffer + * @adapter: pointer to our soft state + * @dma_handle: DMA address of the buffer * * Issue internal commands while interrupts are available. * We only issue direct mailbox commands from within the driver. ioctl() @@ -3983,11 +3982,12 @@ mega_adapinq(adapter_t *adapter, dma_addr_t dma_handle) } -/** mega_internal_dev_inquiry() - * @adapter - pointer to our soft state - * @ch - channel for this device - * @tgt - ID of this device - * @buf_dma_handle - DMA address of the buffer +/** + * mega_internal_dev_inquiry() + * @adapter: pointer to our soft state + * @ch: channel for this device + * @tgt: ID of this device + * @buf_dma_handle: DMA address of the buffer * * Issue the scsi inquiry for the specified device. */ @@ -4056,9 +4056,9 @@ mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt, /** * mega_internal_command() - * @adapter - pointer to our soft state - * @mc - the mailbox command - * @pthru - Passthru structure for DCDB commands + * @adapter: pointer to our soft state + * @mc: the mailbox command + * @pthru: Passthru structure for DCDB commands * * Issue the internal commands in interrupt mode. * The last argument is the address of the passthru structure if the command -- 2.25.1
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index f27ffd088c8ae..2d57836d1607f 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -124,7 +124,7 @@ static int trace_level; /** * mega_setup_mailbox() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Allocates a 8 byte aligned memory for the handshake mailbox. */ @@ -178,9 +178,9 @@ mega_setup_mailbox(adapter_t *adapter) } -/* +/** * mega_query_adapter() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Issue the adapter inquiry commands to the controller and find out * information and parameter about the devices attached @@ -347,7 +347,7 @@ mega_query_adapter(adapter_t *adapter) /** * mega_runpendq() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Runs through the list of pending requests. */ @@ -358,10 +358,10 @@ mega_runpendq(adapter_t *adapter) __mega_runpendq(adapter); } -/* +/** * megaraid_queue() - * @scmd - Issue this scsi command - * @done - the callback hook into the scsi mid-layer + * @scmd: Issue this scsi command + * @done: the callback hook into the scsi mid-layer * * The command queuing entry point for the mid-layer. */ @@ -413,8 +413,8 @@ static DEF_SCSI_QCMD(megaraid_queue) /** * mega_allocate_scb() - * @adapter - pointer to our soft state - * @cmd - scsi command from the mid-layer + * @adapter: pointer to our soft state + * @cmd: scsi command from the mid-layer * * Allocate a SCB structure. This is the central structure for controller * commands. @@ -444,9 +444,9 @@ mega_allocate_scb(adapter_t *adapter, struct scsi_cmnd *cmd) /** * mega_get_ldrv_num() - * @adapter - pointer to our soft state - * @cmd - scsi mid layer command - * @channel - channel on the controller + * @adapter: pointer to our soft state + * @cmd: scsi mid layer command + * @channel: channel on the controller * * Calculate the logical drive number based on the information in scsi command * and the channel number. @@ -503,9 +503,9 @@ mega_get_ldrv_num(adapter_t *adapter, struct scsi_cmnd *cmd, int channel) /** * mega_build_cmd() - * @adapter - pointer to our soft state - * @cmd - Prepare using this scsi command - * @busy - busy flag if no resources + * @adapter: pointer to our soft state + * @cmd: Prepare using this scsi command + * @busy: busy flag if no resources * * Prepares a command and scatter gather list for the controller. This routine * also finds out if the commands is intended for a logical drive or a @@ -937,11 +937,11 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy) /** * mega_prepare_passthru() - * @adapter - pointer to our soft state - * @scb - our scsi control block - * @cmd - scsi command from the mid-layer - * @channel - actual channel on the controller - * @target - actual id on the controller. + * @adapter: pointer to our soft state + * @scb: our scsi control block + * @cmd: scsi command from the mid-layer + * @channel: actual channel on the controller + * @target: actual id on the controller. * * prepare a command for the scsi physical devices. */ @@ -1000,11 +1000,11 @@ mega_prepare_passthru(adapter_t *adapter, scb_t *scb, struct scsi_cmnd *cmd, /** * mega_prepare_extpassthru() - * @adapter - pointer to our soft state - * @scb - our scsi control block - * @cmd - scsi command from the mid-layer - * @channel - actual channel on the controller - * @target - actual id on the controller. + * @adapter: pointer to our soft state + * @scb: our scsi control block + * @cmd: scsi command from the mid-layer + * @channel: actual channel on the controller + * @target: actual id on the controller. * * prepare a command for the scsi physical devices. This rountine prepares * commands for devices which can take extended CDBs (>10 bytes) @@ -1085,8 +1085,8 @@ __mega_runpendq(adapter_t *adapter) /** * issue_scb() - * @adapter - pointer to our soft state - * @scb - scsi control block + * @adapter: pointer to our soft state + * @scb: scsi control block * * Post a command to the card if the mailbox is available, otherwise return * busy. We also take the scb from the pending list if the mailbox is @@ -1166,8 +1166,8 @@ mega_busywait_mbox (adapter_t *adapter) /** * issue_scb_block() - * @adapter - pointer to our soft state - * @raw_mbox - the mailbox + * @adapter: pointer to our soft state + * @raw_mbox: the mailbox * * Issue a scb in synchronous and non-interrupt mode */ @@ -1247,8 +1247,8 @@ issue_scb_block(adapter_t *adapter, u_char *raw_mbox) /** * megaraid_isr_iomapped() - * @irq - irq - * @devp - pointer to our soft state + * @irq: irq + * @devp: pointer to our soft state * * Interrupt service routine for io-mapped controllers. * Find out if our device is interrupting. If yes, acknowledge the interrupt @@ -1323,8 +1323,8 @@ megaraid_isr_iomapped(int irq, void *devp) /** * megaraid_isr_memmapped() - * @irq - irq - * @devp - pointer to our soft state + * @irq: irq + * @devp: pointer to our soft state * * Interrupt service routine for memory-mapped controllers. * Find out if our device is interrupting. If yes, acknowledge the interrupt @@ -1401,10 +1401,10 @@ megaraid_isr_memmapped(int irq, void *devp) } /** * mega_cmd_done() - * @adapter - pointer to our soft state - * @completed - array of ids of completed commands - * @nstatus - number of completed commands - * @status - status of the last command completed + * @adapter: pointer to our soft state + * @completed: array of ids of completed commands + * @nstatus: number of completed commands + * @status: status of the last command completed * * Complete the commands and call the scsi mid-layer callback hooks. */ @@ -1921,9 +1921,9 @@ megaraid_reset(struct scsi_cmnd *cmd) /** * megaraid_abort_and_reset() - * @adapter - megaraid soft state - * @cmd - scsi command to be aborted or reset - * @aor - abort or reset flag + * @adapter: megaraid soft state + * @cmd: scsi command to be aborted or reset + * @aor: abort or reset flag * * Try to locate the scsi command in the pending queue. If found and is not * issued to the controller, abort/reset it. Otherwise return failure @@ -2021,8 +2021,8 @@ free_local_pdev(struct pci_dev *pdev) /** * mega_allocate_inquiry() - * @dma_handle - handle returned for dma address - * @pdev - handle to pci device + * @dma_handle: handle returned for dma address + * @pdev: handle to pci device * * allocates memory for inquiry structure */ @@ -2045,8 +2045,8 @@ mega_free_inquiry(void *inquiry, dma_addr_t dma_handle, struct pci_dev *pdev) /** * proc_show_config() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display configuration information about the controller. */ @@ -2109,8 +2109,8 @@ proc_show_config(struct seq_file *m, void *v) /** * proc_show_stat() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display statistical information about the I/O activity. */ @@ -2143,8 +2143,8 @@ proc_show_stat(struct seq_file *m, void *v) /** * proc_show_mbox() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display mailbox information for the last command issued. This information * is good for debugging. @@ -2171,8 +2171,8 @@ proc_show_mbox(struct seq_file *m, void *v) /** * proc_show_rebuild_rate() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display current rebuild rate */ @@ -2214,8 +2214,8 @@ proc_show_rebuild_rate(struct seq_file *m, void *v) /** * proc_show_battery() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display information about the battery module on the controller. */ @@ -2317,9 +2317,9 @@ mega_print_inquiry(struct seq_file *m, char *scsi_inq) /** * proc_show_pdrv() - * @m - Synthetic file construction data - * @page - buffer to write the data in - * @adapter - pointer to our soft state + * @m: Synthetic file construction data + * @adapter: pointer to our soft state + * @channel: channel on the controller * * Display information about the physical drives. */ @@ -2433,8 +2433,8 @@ proc_show_pdrv(struct seq_file *m, adapter_t *adapter, int channel) /** * proc_show_pdrv_ch0() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display information about the physical drives on physical channel 0. */ @@ -2447,8 +2447,8 @@ proc_show_pdrv_ch0(struct seq_file *m, void *v) /** * proc_show_pdrv_ch1() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display information about the physical drives on physical channel 1. */ @@ -2461,8 +2461,8 @@ proc_show_pdrv_ch1(struct seq_file *m, void *v) /** * proc_show_pdrv_ch2() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display information about the physical drives on physical channel 2. */ @@ -2475,8 +2475,8 @@ proc_show_pdrv_ch2(struct seq_file *m, void *v) /** * proc_show_pdrv_ch3() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display information about the physical drives on physical channel 3. */ @@ -2489,10 +2489,10 @@ proc_show_pdrv_ch3(struct seq_file *m, void *v) /** * proc_show_rdrv() - * @m - Synthetic file construction data - * @adapter - pointer to our soft state - * @start - starting logical drive to display - * @end - ending logical drive to display + * @m: Synthetic file construction data + * @adapter: pointer to our soft state + * @start: starting logical drive to display + * @end: ending logical drive to display * * We do not print the inquiry information since its already available through * /proc/scsi/scsi interface @@ -2674,8 +2674,8 @@ proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start, int end ) /** * proc_show_rdrv_10() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display real time information about the logical drives 0 through 9. */ @@ -2688,8 +2688,8 @@ proc_show_rdrv_10(struct seq_file *m, void *v) /** * proc_show_rdrv_20() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display real time information about the logical drives 0 through 9. */ @@ -2702,8 +2702,8 @@ proc_show_rdrv_20(struct seq_file *m, void *v) /** * proc_show_rdrv_30() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display real time information about the logical drives 0 through 9. */ @@ -2716,8 +2716,8 @@ proc_show_rdrv_30(struct seq_file *m, void *v) /** * proc_show_rdrv_40() - * @m - Synthetic file construction data - * @v - File iterator + * @m: Synthetic file construction data + * @v: File iterator * * Display real time information about the logical drives 0 through 9. */ @@ -2729,8 +2729,8 @@ proc_show_rdrv_40(struct seq_file *m, void *v) /** * mega_create_proc_entry() - * @index - index in soft state array - * @parent - parent node for this /proc entry + * @index: index in soft state array + * @parent: parent node for this /proc entry * * Creates /proc entries for our controllers. */ @@ -2785,7 +2785,7 @@ static inline void mega_create_proc_entry(int index, struct proc_dir_entry *pare #endif -/** +/* * megaraid_biosparam() * * Return the disk geometry for a particular disk @@ -2854,7 +2854,7 @@ megaraid_biosparam(struct scsi_device *sdev, struct block_device *bdev, /** * mega_init_scb() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Allocate memory for the various pointers in the scb structures: * scatter-gather list pointer, passthru and extended passthru structure @@ -2934,8 +2934,8 @@ mega_init_scb(adapter_t *adapter) /** * megadev_open() - * @inode - unused - * @filep - unused + * @inode: unused + * @filep: unused * * Routines for the character/ioctl interface to the driver. Find out if this * is a valid open. @@ -2954,10 +2954,9 @@ megadev_open (struct inode *inode, struct file *filep) /** * megadev_ioctl() - * @inode - Our device inode - * @filep - unused - * @cmd - ioctl command - * @arg - user buffer + * @filep: unused + * @cmd: ioctl command + * @arg: user buffer * * ioctl entry point for our private ioctl interface. We move the data in from * the user space, prepare the command (if necessary, convert the old MIMD @@ -3370,8 +3369,8 @@ megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) /** * mega_m_to_n() - * @arg - user address - * @uioc - new ioctl structure + * @arg: user address + * @uioc: new ioctl structure * * A thin layer to convert older mimd interface ioctl structure to NIT ioctl * structure @@ -3496,10 +3495,10 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc) return 0; } -/* +/** * mega_n_to_m() - * @arg - user address - * @mc - mailbox command + * @arg: user address + * @mc: mailbox command * * Updates the status information to the application, depending on application * conforms to older mimd ioctl interface or newer NIT ioctl interface @@ -3565,7 +3564,7 @@ mega_n_to_m(void __user *arg, megacmd_t *mc) /** * mega_is_bios_enabled() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * issue command to find out if the BIOS is enabled for this controller */ @@ -3596,7 +3595,7 @@ mega_is_bios_enabled(adapter_t *adapter) /** * mega_enum_raid_scsi() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Find out what channels are RAID/SCSI. This information is used to * differentiate the virtual channels and physical channels and to support @@ -3651,7 +3650,7 @@ mega_enum_raid_scsi(adapter_t *adapter) /** * mega_get_boot_drv() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Find out which device is the boot device. Note, any logical drive or any * phyical device (e.g., a CDROM) can be designated as a boot device. @@ -3718,7 +3717,7 @@ mega_get_boot_drv(adapter_t *adapter) /** * mega_support_random_del() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Find out if this controller supports random deletion and addition of * logical drives @@ -3748,7 +3747,7 @@ mega_support_random_del(adapter_t *adapter) /** * mega_support_ext_cdb() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Find out if this firmware support cdblen > 10 */ @@ -3776,8 +3775,8 @@ mega_support_ext_cdb(adapter_t *adapter) /** * mega_del_logdrv() - * @adapter - pointer to our soft state - * @logdrv - logical drive to be deleted + * @adapter: pointer to our soft state + * @logdrv: logical drive to be deleted * * Delete the specified logical drive. It is the responsibility of the user * app to let the OS know about this operation. @@ -3862,7 +3861,7 @@ mega_do_del_logdrv(adapter_t *adapter, int logdrv) /** * mega_get_max_sgl() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Find out the maximum number of scatter-gather elements supported by this * version of the firmware @@ -3908,7 +3907,7 @@ mega_get_max_sgl(adapter_t *adapter) /** * mega_support_cluster() - * @adapter - pointer to our soft state + * @adapter: pointer to our soft state * * Find out if this firmware support cluster calls. */ @@ -3950,8 +3949,8 @@ mega_support_cluster(adapter_t *adapter) #ifdef CONFIG_PROC_FS /** * mega_adapinq() - * @adapter - pointer to our soft state - * @dma_handle - DMA address of the buffer + * @adapter: pointer to our soft state + * @dma_handle: DMA address of the buffer * * Issue internal commands while interrupts are available. * We only issue direct mailbox commands from within the driver. ioctl() @@ -3983,11 +3982,12 @@ mega_adapinq(adapter_t *adapter, dma_addr_t dma_handle) } -/** mega_internal_dev_inquiry() - * @adapter - pointer to our soft state - * @ch - channel for this device - * @tgt - ID of this device - * @buf_dma_handle - DMA address of the buffer +/** + * mega_internal_dev_inquiry() + * @adapter: pointer to our soft state + * @ch: channel for this device + * @tgt: ID of this device + * @buf_dma_handle: DMA address of the buffer * * Issue the scsi inquiry for the specified device. */ @@ -4056,9 +4056,9 @@ mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt, /** * mega_internal_command() - * @adapter - pointer to our soft state - * @mc - the mailbox command - * @pthru - Passthru structure for DCDB commands + * @adapter: pointer to our soft state + * @mc: the mailbox command + * @pthru: Passthru structure for DCDB commands * * Issue the internal commands in interrupt mode. * The last argument is the address of the passthru structure if the command
Plus a couple of API catch-ups. Fixes the following W=1 kernel build warning(s): drivers/scsi/megaraid.c:133: warning: Function parameter or member 'adapter' not described in 'mega_setup_mailbox' drivers/scsi/megaraid.c:356: warning: Function parameter or member 'adapter' not described in 'mega_runpendq' drivers/scsi/megaraid.c:424: warning: Function parameter or member 'adapter' not described in 'mega_allocate_scb' drivers/scsi/megaraid.c:424: warning: Function parameter or member 'cmd' not described in 'mega_allocate_scb' drivers/scsi/megaraid.c:456: warning: Function parameter or member 'adapter' not described in 'mega_get_ldrv_num' drivers/scsi/megaraid.c:456: warning: Function parameter or member 'cmd' not described in 'mega_get_ldrv_num' drivers/scsi/megaraid.c:456: warning: Function parameter or member 'channel' not described in 'mega_get_ldrv_num' drivers/scsi/megaraid.c:519: warning: Function parameter or member 'adapter' not described in 'mega_build_cmd' drivers/scsi/megaraid.c:519: warning: Function parameter or member 'cmd' not described in 'mega_build_cmd' drivers/scsi/megaraid.c:519: warning: Function parameter or member 'busy' not described in 'mega_build_cmd' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'adapter' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'scb' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'cmd' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'channel' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'target' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'adapter' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'scb' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'cmd' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'channel' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'target' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1097: warning: Function parameter or member 'adapter' not described in 'issue_scb' drivers/scsi/megaraid.c:1097: warning: Function parameter or member 'scb' not described in 'issue_scb' drivers/scsi/megaraid.c:1176: warning: Function parameter or member 'adapter' not described in 'issue_scb_block' drivers/scsi/megaraid.c:1176: warning: Function parameter or member 'raw_mbox' not described in 'issue_scb_block' drivers/scsi/megaraid.c:1259: warning: Function parameter or member 'irq' not described in 'megaraid_isr_iomapped' drivers/scsi/megaraid.c:1259: warning: Function parameter or member 'devp' not described in 'megaraid_isr_iomapped' drivers/scsi/megaraid.c:1335: warning: Function parameter or member 'irq' not described in 'megaraid_isr_memmapped' drivers/scsi/megaraid.c:1335: warning: Function parameter or member 'devp' not described in 'megaraid_isr_memmapped' drivers/scsi/megaraid.c:1413: warning: Function parameter or member 'adapter' not described in 'mega_cmd_done' drivers/scsi/megaraid.c:1413: warning: Function parameter or member 'completed' not described in 'mega_cmd_done' drivers/scsi/megaraid.c:1413: warning: Function parameter or member 'nstatus' not described in 'mega_cmd_done' drivers/scsi/megaraid.c:1413: warning: Function parameter or member 'status' not described in 'mega_cmd_done' drivers/scsi/megaraid.c:1933: warning: Function parameter or member 'adapter' not described in 'megaraid_abort_and_reset' drivers/scsi/megaraid.c:1933: warning: Function parameter or member 'cmd' not described in 'megaraid_abort_and_reset' drivers/scsi/megaraid.c:1933: warning: Function parameter or member 'aor' not described in 'megaraid_abort_and_reset' drivers/scsi/megaraid.c:2031: warning: Function parameter or member 'dma_handle' not described in 'mega_allocate_inquiry' drivers/scsi/megaraid.c:2031: warning: Function parameter or member 'pdev' not described in 'mega_allocate_inquiry' drivers/scsi/megaraid.c:2055: warning: Function parameter or member 'm' not described in 'proc_show_config' drivers/scsi/megaraid.c:2055: warning: Function parameter or member 'v' not described in 'proc_show_config' drivers/scsi/megaraid.c:2119: warning: Function parameter or member 'm' not described in 'proc_show_stat' drivers/scsi/megaraid.c:2119: warning: Function parameter or member 'v' not described in 'proc_show_stat' drivers/scsi/megaraid.c:2154: warning: Function parameter or member 'm' not described in 'proc_show_mbox' drivers/scsi/megaraid.c:2154: warning: Function parameter or member 'v' not described in 'proc_show_mbox' drivers/scsi/megaraid.c:2181: warning: Function parameter or member 'm' not described in 'proc_show_rebuild_rate' drivers/scsi/megaraid.c:2181: warning: Function parameter or member 'v' not described in 'proc_show_rebuild_rate' drivers/scsi/megaraid.c:2224: warning: Function parameter or member 'm' not described in 'proc_show_battery' drivers/scsi/megaraid.c:2224: warning: Function parameter or member 'v' not described in 'proc_show_battery' drivers/scsi/megaraid.c:2328: warning: Function parameter or member 'm' not described in 'proc_show_pdrv' drivers/scsi/megaraid.c:2328: warning: Function parameter or member 'adapter' not described in 'proc_show_pdrv' drivers/scsi/megaraid.c:2328: warning: Function parameter or member 'channel' not described in 'proc_show_pdrv' drivers/scsi/megaraid.c:2443: warning: Function parameter or member 'm' not described in 'proc_show_pdrv_ch0' drivers/scsi/megaraid.c:2443: warning: Function parameter or member 'v' not described in 'proc_show_pdrv_ch0' drivers/scsi/megaraid.c:2457: warning: Function parameter or member 'm' not described in 'proc_show_pdrv_ch1' drivers/scsi/megaraid.c:2457: warning: Function parameter or member 'v' not described in 'proc_show_pdrv_ch1' drivers/scsi/megaraid.c:2471: warning: Function parameter or member 'm' not described in 'proc_show_pdrv_ch2' drivers/scsi/megaraid.c:2471: warning: Function parameter or member 'v' not described in 'proc_show_pdrv_ch2' drivers/scsi/megaraid.c:2485: warning: Function parameter or member 'm' not described in 'proc_show_pdrv_ch3' drivers/scsi/megaraid.c:2485: warning: Function parameter or member 'v' not described in 'proc_show_pdrv_ch3' drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'm' not described in 'proc_show_rdrv' drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'adapter' not described in 'proc_show_rdrv' drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'start' not described in 'proc_show_rdrv' drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'end' not described in 'proc_show_rdrv' drivers/scsi/megaraid.c:2684: warning: Function parameter or member 'm' not described in 'proc_show_rdrv_10' drivers/scsi/megaraid.c:2684: warning: Function parameter or member 'v' not described in 'proc_show_rdrv_10' drivers/scsi/megaraid.c:2698: warning: Function parameter or member 'm' not described in 'proc_show_rdrv_20' drivers/scsi/megaraid.c:2698: warning: Function parameter or member 'v' not described in 'proc_show_rdrv_20' drivers/scsi/megaraid.c:2712: warning: Function parameter or member 'm' not described in 'proc_show_rdrv_30' drivers/scsi/megaraid.c:2712: warning: Function parameter or member 'v' not described in 'proc_show_rdrv_30' drivers/scsi/megaraid.c:2726: warning: Function parameter or member 'm' not described in 'proc_show_rdrv_40' drivers/scsi/megaraid.c:2726: warning: Function parameter or member 'v' not described in 'proc_show_rdrv_40' drivers/scsi/megaraid.c:2739: warning: Function parameter or member 'index' not described in 'mega_create_proc_entry' drivers/scsi/megaraid.c:2739: warning: Function parameter or member 'parent' not described in 'mega_create_proc_entry' drivers/scsi/megaraid.c:2796: warning: Function parameter or member 'sdev' not described in 'megaraid_biosparam' drivers/scsi/megaraid.c:2796: warning: Function parameter or member 'bdev' not described in 'megaraid_biosparam' drivers/scsi/megaraid.c:2796: warning: Function parameter or member 'capacity' not described in 'megaraid_biosparam' drivers/scsi/megaraid.c:2796: warning: Function parameter or member 'geom' not described in 'megaraid_biosparam' drivers/scsi/megaraid.c:2865: warning: Function parameter or member 'adapter' not described in 'mega_init_scb' drivers/scsi/megaraid.c:2945: warning: Function parameter or member 'inode' not described in 'megadev_open' drivers/scsi/megaraid.c:2945: warning: Function parameter or member 'filep' not described in 'megadev_open' drivers/scsi/megaraid.c:2969: warning: Function parameter or member 'filep' not described in 'megadev_ioctl' drivers/scsi/megaraid.c:2969: warning: Function parameter or member 'cmd' not described in 'megadev_ioctl' drivers/scsi/megaraid.c:2969: warning: Function parameter or member 'arg' not described in 'megadev_ioctl' drivers/scsi/megaraid.c:3383: warning: Function parameter or member 'arg' not described in 'mega_m_to_n' drivers/scsi/megaraid.c:3383: warning: Function parameter or member 'uioc' not described in 'mega_m_to_n' drivers/scsi/megaraid.c:3574: warning: Function parameter or member 'adapter' not described in 'mega_is_bios_enabled' drivers/scsi/megaraid.c:3607: warning: Function parameter or member 'adapter' not described in 'mega_enum_raid_scsi' drivers/scsi/megaraid.c:3661: warning: Function parameter or member 'adapter' not described in 'mega_get_boot_drv' drivers/scsi/megaraid.c:3728: warning: Function parameter or member 'adapter' not described in 'mega_support_random_del' drivers/scsi/megaraid.c:3757: warning: Function parameter or member 'adapter' not described in 'mega_support_ext_cdb' drivers/scsi/megaraid.c:3787: warning: Function parameter or member 'adapter' not described in 'mega_del_logdrv' drivers/scsi/megaraid.c:3787: warning: Function parameter or member 'logdrv' not described in 'mega_del_logdrv' drivers/scsi/megaraid.c:3872: warning: Function parameter or member 'adapter' not described in 'mega_get_max_sgl' drivers/scsi/megaraid.c:3917: warning: Function parameter or member 'adapter' not described in 'mega_support_cluster' drivers/scsi/megaraid.c:3962: warning: Function parameter or member 'adapter' not described in 'mega_adapinq' drivers/scsi/megaraid.c:3962: warning: Function parameter or member 'dma_handle' not described in 'mega_adapinq' drivers/scsi/megaraid.c:4071: warning: Function parameter or member 'adapter' not described in 'mega_internal_command' drivers/scsi/megaraid.c:4071: warning: Function parameter or member 'mc' not described in 'mega_internal_command' drivers/scsi/megaraid.c:4071: warning: Function parameter or member 'pthru' not described in 'mega_internal_command' Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Seokmann.Ju@lsil.com Cc: sju@lsil.com Cc: megaraidlinux.pdl@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/scsi/megaraid.c | 218 ++++++++++++++++++++-------------------- 1 file changed, 109 insertions(+), 109 deletions(-)