Message ID | 20200714093229.28763-2-jagan@amarulasolutions.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | roc-rk3399-pc: Custom SPL | expand |
On 2020/7/14 下午5:32, Jagan Teki wrote: > roc-rk3399-pc has some specific requirements to support LEDS, > environment. board detection and etc prior to U-Boot proper. > > So as of now SPL would be a better stage for these custom board > requirements to support unlike TPL. Adding few of these custom > requirements like LEDS in TPL would require extra code pulling > and also the size of TPL can grow. > > So, this patch moves the leds code from TPL into SPL after relocation. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com> Thanks, - Kever > --- > Changes for v5 > - drop tpl.c file > - update the code in board file > > arch/arm/mach-rockchip/tpl.c | 7 ---- > board/firefly/roc-pc-rk3399/roc-pc-rk3399.c | 36 +++++++++++---------- > configs/roc-pc-mezzanine-rk3399_defconfig | 2 +- > configs/roc-pc-rk3399_defconfig | 2 +- > 4 files changed, 21 insertions(+), 26 deletions(-) > > diff --git a/arch/arm/mach-rockchip/tpl.c b/arch/arm/mach-rockchip/tpl.c > index 88f80b05a9..cc908e1b0e 100644 > --- a/arch/arm/mach-rockchip/tpl.c > +++ b/arch/arm/mach-rockchip/tpl.c > @@ -43,18 +43,11 @@ __weak void rockchip_stimer_init(void) > TIMER_CONTROL_REG); > } > > -__weak int board_early_init_f(void) > -{ > - return 0; > -} > - > void board_init_f(ulong dummy) > { > struct udevice *dev; > int ret; > > - board_early_init_f(); > - > #if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL_SUPPORT) > /* > * Debug UART can be used from here if required: > diff --git a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c > index 7c3a803654..4db3dd739c 100644 > --- a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c > +++ b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c > @@ -6,14 +6,24 @@ > #include <common.h> > #include <dm.h> > #include <log.h> > -#include <asm/arch-rockchip/periph.h> > -#include <power/regulator.h> > #include <spl_gpio.h> > -#include <asm/io.h> > +#include <power/regulator.h> > + > #include <asm/arch-rockchip/gpio.h> > > -#ifndef CONFIG_SPL_BUILD > -int board_early_init_f(void) > +#define GPIO0_BASE 0xff720000 > + > +static int led_setup(void) > +{ > + struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE; > + > + /* Turn on red LED, indicating full power mode */ > + spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1); > + > + return 0; > +} > + > +static int roc_pc_early_init_f(void) > { > struct udevice *regulator; > int ret; > @@ -30,19 +40,11 @@ int board_early_init_f(void) > out: > return 0; > } > -#endif > - > -#if defined(CONFIG_TPL_BUILD) > - > -#define GPIO0_BASE 0xff720000 > > int board_early_init_f(void) > { > - struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE; > - > - /* Turn on red LED, indicating full power mode */ > - spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1); > - > - return 0; > + if (IS_ENABLED(CONFIG_SPL_BUILD)) > + return led_setup(); > + else > + return roc_pc_early_init_f(); > } > -#endif > diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig > index c87a8568fc..15d511741f 100644 > --- a/configs/roc-pc-mezzanine-rk3399_defconfig > +++ b/configs/roc-pc-mezzanine-rk3399_defconfig > @@ -1,6 +1,7 @@ > CONFIG_ARM=y > CONFIG_ARCH_ROCKCHIP=y > CONFIG_SYS_TEXT_BASE=0x00200000 > +CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_ENV_SIZE=0x8000 > CONFIG_ENV_OFFSET=0x3F8000 > CONFIG_ENV_SECT_SIZE=0x1000 > @@ -21,7 +22,6 @@ CONFIG_SPL_STACK_R=y > CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 > CONFIG_SPL_SPI_LOAD=y > CONFIG_TPL=y > -CONFIG_TPL_GPIO_SUPPORT=y > CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPT=y > CONFIG_CMD_MMC=y > diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig > index 601f5c6ae1..2a6d0d22c8 100644 > --- a/configs/roc-pc-rk3399_defconfig > +++ b/configs/roc-pc-rk3399_defconfig > @@ -1,6 +1,7 @@ > CONFIG_ARM=y > CONFIG_ARCH_ROCKCHIP=y > CONFIG_SYS_TEXT_BASE=0x00200000 > +CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_ENV_SIZE=0x8000 > CONFIG_ENV_OFFSET=0x3F8000 > CONFIG_ENV_SECT_SIZE=0x1000 > @@ -21,7 +22,6 @@ CONFIG_SPL_STACK_R=y > CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 > CONFIG_SPL_SPI_LOAD=y > CONFIG_TPL=y > -CONFIG_TPL_GPIO_SUPPORT=y > CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPT=y > CONFIG_CMD_MMC=y
diff --git a/arch/arm/mach-rockchip/tpl.c b/arch/arm/mach-rockchip/tpl.c index 88f80b05a9..cc908e1b0e 100644 --- a/arch/arm/mach-rockchip/tpl.c +++ b/arch/arm/mach-rockchip/tpl.c @@ -43,18 +43,11 @@ __weak void rockchip_stimer_init(void) TIMER_CONTROL_REG); } -__weak int board_early_init_f(void) -{ - return 0; -} - void board_init_f(ulong dummy) { struct udevice *dev; int ret; - board_early_init_f(); - #if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL_SUPPORT) /* * Debug UART can be used from here if required: diff --git a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c index 7c3a803654..4db3dd739c 100644 --- a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c +++ b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c @@ -6,14 +6,24 @@ #include <common.h> #include <dm.h> #include <log.h> -#include <asm/arch-rockchip/periph.h> -#include <power/regulator.h> #include <spl_gpio.h> -#include <asm/io.h> +#include <power/regulator.h> + #include <asm/arch-rockchip/gpio.h> -#ifndef CONFIG_SPL_BUILD -int board_early_init_f(void) +#define GPIO0_BASE 0xff720000 + +static int led_setup(void) +{ + struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE; + + /* Turn on red LED, indicating full power mode */ + spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1); + + return 0; +} + +static int roc_pc_early_init_f(void) { struct udevice *regulator; int ret; @@ -30,19 +40,11 @@ int board_early_init_f(void) out: return 0; } -#endif - -#if defined(CONFIG_TPL_BUILD) - -#define GPIO0_BASE 0xff720000 int board_early_init_f(void) { - struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE; - - /* Turn on red LED, indicating full power mode */ - spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1); - - return 0; + if (IS_ENABLED(CONFIG_SPL_BUILD)) + return led_setup(); + else + return roc_pc_early_init_f(); } -#endif diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig index c87a8568fc..15d511741f 100644 --- a/configs/roc-pc-mezzanine-rk3399_defconfig +++ b/configs/roc-pc-mezzanine-rk3399_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_SPL_GPIO_SUPPORT=y CONFIG_ENV_SIZE=0x8000 CONFIG_ENV_OFFSET=0x3F8000 CONFIG_ENV_SECT_SIZE=0x1000 @@ -21,7 +22,6 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_SPL_SPI_LOAD=y CONFIG_TPL=y -CONFIG_TPL_GPIO_SUPPORT=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig index 601f5c6ae1..2a6d0d22c8 100644 --- a/configs/roc-pc-rk3399_defconfig +++ b/configs/roc-pc-rk3399_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_SPL_GPIO_SUPPORT=y CONFIG_ENV_SIZE=0x8000 CONFIG_ENV_OFFSET=0x3F8000 CONFIG_ENV_SECT_SIZE=0x1000 @@ -21,7 +22,6 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_SPL_SPI_LOAD=y CONFIG_TPL=y -CONFIG_TPL_GPIO_SUPPORT=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y
roc-rk3399-pc has some specific requirements to support LEDS, environment. board detection and etc prior to U-Boot proper. So as of now SPL would be a better stage for these custom board requirements to support unlike TPL. Adding few of these custom requirements like LEDS in TPL would require extra code pulling and also the size of TPL can grow. So, this patch moves the leds code from TPL into SPL after relocation. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v5 - drop tpl.c file - update the code in board file arch/arm/mach-rockchip/tpl.c | 7 ---- board/firefly/roc-pc-rk3399/roc-pc-rk3399.c | 36 +++++++++++---------- configs/roc-pc-mezzanine-rk3399_defconfig | 2 +- configs/roc-pc-rk3399_defconfig | 2 +- 4 files changed, 21 insertions(+), 26 deletions(-)