diff mbox series

[07/16] configs: Enable USB host on Rock-PI-N10

Message ID 20200720185120.671064-8-jagan@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series board: Add new features for ROCKPi N8/N10 | expand

Commit Message

Jagan Teki July 20, 2020, 6:51 p.m. UTC 
From: Suniel Mahesh <sunil@amarulasolutions.com>

Enable USB 3.0 and 2.0 and related configs for the Rock-PI-N10
target, which hosts RK3399Pro-VMARC-SOM.

Log:
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3c0000: USB EHCI 1.00
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 1!?
2 USB Device(s) found
        scanning usb for storage devices... 1 Storage Device(s) found
=> usb tree
USB device tree:
        1  Hub (480 Mb/s, 0mA)
                u-boot EHCI Host Controller

        1  Hub (480 Mb/s, 0mA)
                u-boot EHCI Host Controller

        1  Hub (5 Gb/s, 0mA)
        |  U-Boot XHCI Host Controller
        |
        +-2  Mass Storage (5 Gb/s, 224mA)
                SanDisk Dual Drive 04019c9b2e1a58f24ee318c3c123aa5
=> usb tree
USB device tree:
1  Hub (480 Mb/s, 0mA)
|  u-boot EHCI Host Controller
|
+-2  Mass Storage (480 Mb/s, 224mA)
        SanDisk Dual Drive 04019c9b2e1a58f24ee318c3c123aa5

1  Hub (480 Mb/s, 0mA)
   u-boot EHCI Host Controller

Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 configs/rock-pi-n10-rk3399pro_defconfig | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Kever Yang July 21, 2020, 3:20 a.m. UTC | #1 
Hi Jagan,

     For the same board config, please just enable all the features you 
need in one patch

since the drivers already there, no need the split them into pieces.


     BTW: please add prefix "rockchip" in subject

Thanks,

- Kever

On 2020/7/21 上午2:51, Jagan Teki wrote:
> From: Suniel Mahesh <sunil@amarulasolutions.com>
>
> Enable USB 3.0 and 2.0 and related configs for the Rock-PI-N10
> target, which hosts RK3399Pro-VMARC-SOM.
>
> Log:
> Bus usb@fe380000: USB EHCI 1.00
> Bus usb@fe3c0000: USB EHCI 1.00
> Bus dwc3: usb maximum-speed not found
> Register 2000140 NbrPorts 2
> Starting the controller
> USB XHCI 1.10
> scanning bus usb@fe380000 for devices... 1 USB Device(s) found
> scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
> scanning bus dwc3 for devices... cannot reset port 1!?
> 2 USB Device(s) found
>          scanning usb for storage devices... 1 Storage Device(s) found
> => usb tree
> USB device tree:
>          1  Hub (480 Mb/s, 0mA)
>                  u-boot EHCI Host Controller
>
>          1  Hub (480 Mb/s, 0mA)
>                  u-boot EHCI Host Controller
>
>          1  Hub (5 Gb/s, 0mA)
>          |  U-Boot XHCI Host Controller
>          |
>          +-2  Mass Storage (5 Gb/s, 224mA)
>                  SanDisk Dual Drive 04019c9b2e1a58f24ee318c3c123aa5
> => usb tree
> USB device tree:
> 1  Hub (480 Mb/s, 0mA)
> |  u-boot EHCI Host Controller
> |
> +-2  Mass Storage (480 Mb/s, 224mA)
>          SanDisk Dual Drive 04019c9b2e1a58f24ee318c3c123aa5
>
> 1  Hub (480 Mb/s, 0mA)
>     u-boot EHCI Host Controller
>
> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>   configs/rock-pi-n10-rk3399pro_defconfig | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
>
> diff --git a/configs/rock-pi-n10-rk3399pro_defconfig b/configs/rock-pi-n10-rk3399pro_defconfig
> index c705ce01ce..e09e656fbc 100644
> --- a/configs/rock-pi-n10-rk3399pro_defconfig
> +++ b/configs/rock-pi-n10-rk3399pro_defconfig
> @@ -19,6 +19,7 @@ CONFIG_TPL=y
>   CONFIG_CMD_BOOTZ=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
>   CONFIG_CMD_TIME=y
>   CONFIG_SPL_OF_CONTROL=y
> @@ -36,11 +37,23 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y
>   CONFIG_DM_ETH=y
>   CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_PHY_ROCKCHIP_TYPEC=y
>   CONFIG_PMIC_RK8XX=y
>   CONFIG_REGULATOR_PWM=y
>   CONFIG_REGULATOR_RK8XX=y
>   CONFIG_PWM_ROCKCHIP=y
> +CONFIG_DM_RESET=y
>   CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_GENERIC=y
> +CONFIG_USB_KEYBOARD=y
> +# CONFIG_USB_KEYBOARD_FN_KEYS is not set
>   CONFIG_ERRNO_STR=y
diff mbox series

Patch

diff --git a/configs/rock-pi-n10-rk3399pro_defconfig b/configs/rock-pi-n10-rk3399pro_defconfig
index c705ce01ce..e09e656fbc 100644
--- a/configs/rock-pi-n10-rk3399pro_defconfig
+++ b/configs/rock-pi-n10-rk3399pro_defconfig
@@ -19,6 +19,7 @@  CONFIG_TPL=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
 CONFIG_SPL_OF_CONTROL=y
@@ -36,11 +37,23 @@  CONFIG_MMC_SDHCI_ROCKCHIP=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
+CONFIG_DM_RESET=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_KEYBOARD=y
+# CONFIG_USB_KEYBOARD_FN_KEYS is not set
 CONFIG_ERRNO_STR=y